Problem with model size in Visual Composer

Hello madam/sir,
We are using ECC 5.0 and VC 700.8.0.1. We got error message during
deployment "Error in compiling Flex application. Branch between 19217
and 228774 around line 0 exceeds 32K". When we delete several blocks in
the model, it works good. So tried to delete different blocks so we
think that the problem is not with specific block but with model size.
Our model is in one iView. We cannot use additional nested
iViews because we have HTML View blocks that cannot be in
nested iView (according to VC documentation). Is there any solution for
this error? What does it mean?
Best Regards,
Sergey Kozyrev

I agree with Ashutosh, you have to remodeling your model. You can also try to restart VC and deploy your model again, this might also help sometimes (I had sometimes the issue, that I removed any components and then I get the 32K error, after restarting the error disappeared).
You can also check if you have any global entry list, which you do not use in your model, this also could help to reduce you model size.
Best Regards,
Marcel

Similar Messages

  • Problem with font size, not showing up as expected.

    I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
    http://www.kgngroup.net/logos_and_packaging.html
    I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
    My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
    Not sure where to go from here. I just want to get the body font down to 10 pixels.
    TIA,
    Ken

    John Waller wrote:
    I guess this a follow up to your earlier thread
    http://forums.adobe.com/message/3627681
    What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
    Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
    In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
    e.g.
    The tiny font in the RHS column is affected first by
    .style8 {
    font-size: 0.5em;
    affecting the <td> then by
    .style11 {font-size: 75%}
    affecting the <p> tag.
    End result = tiny text (approx 2px).
    In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
    Avoid %. Use px.
    Apply font sizing rules logically starting from the <body> tag downwards.
    That'll give you a solid baseline without weird effects.
    Ah, I find your answer worth repeating.
    Very cool that you have diagnosed so well and spelled it out here.
    I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
    It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
    Thank You,
    Ken

  • Problem with Cell size in Excel output of XML report

    Dear all,
    I am facing a problem with cell size when i run my XML report in Excel output. I found that it imitates the cell size of whatever i gave in the RTF. I cannot increase the cell size in RTF as my report contains 60 columns and max width of MS Word table is 22 inches.
    Can any one suggest a way of doing this which shows full data in Excel sheet depending on the column data size with out any word wrap.
    Thanks
    RAJ

    Hi ,
    You can try with
    <xsl:attribute xdofo:ctx="block" name="wrap-option">no-wrap</xsl:attribute>
    may be helpful to you
    Thanks,
    Ananth
    http://bintelligencegroup.wordpress.com/

  • Printing Problem with custom size paper in Illustrator

    Hi having problems with my custom sized paper print using my canon printers it's the same on both the ip100 and the pro-100s,  it was printing fine until i've updated my illustrator and mac os Yosemite, it prints the image at a reduced size on the paper to what it should be does anyone have any understanding of this? I've tried everything i know, is this a driver or system problem?

    Hi there wasn't an option to set the default printer to pdf where would I do this?
    I've done a bit of a work around that seems to be working. I've put the page set up as A4 and then clicked on the printer utility custom settings and then unticked detect paper width, so I can put through the paper I want just got to tweak the x and y to get it right, its not the best but sitting here for four hours trying to figure it out, it will have to do for now. Thanks Jacob for your help, no doubt I'll be back in the morning, I'm burnt out now!

  • Having problem with "artwork size & resolution exceeds the max that can be rasterized"

    Hi all,
    Ok, I created a 162.7" x 90.6" document (artboard) for an exhibition display I'm designing. The document was created using all the defaults - i think this is where i went wrong. Illustrator is now telling me that "the combination of artwork size and resolution exceeds the maximum that can be rasterized" after i open the document and when i try to add a drop shadow to anything.
    Other than some vector graphics i created in illustrator, I only have 3 180ppi and 4 300ppi photos tranfered right off the photograpers camera.
    I selected :
    1. "Print Document" from the initial splash window.
    2. I entered the artboard size, bleed and left the "Raster Effects" setting to "High (300ppi)"
    I think leaving the Raster Effects setting at 300ppi is where the problem is.
    Do i have to create a new document or can i fix the existing one?

    nados you are a little confused that's all I think things are ll right and you are probably set to go with out going to Photoshop.
    1. Your file is probably fine as is
    2. Make certain you images are linked and not embedded
    3. Your Images are probably ok as far as they are for the the specs required do not lower the resolution just make certain they are linked.
    You may have to reimport them and in the place dialog make certain link is checked.
    4. The Raster Image Effects setting is fine leave it as is.
    5. The jpegs are fine lee your images as is if that was what was supplied to you and they look clean.
    6. When saving the file save as .AI format and in the AI save as option dialog uncheck include linked files
    (you will send them the jpegs as well as the AI file.)
    7. Send the images in what ever format they are now since that is jpeg leave it be just make certain the dimensions are the same as is being used in the document at 100%.
    8 Make Certain you select the text and got Type> Create Outlines before saving the file.
    9 Do not export the file to any other format.
    10 Send the printer production house the AI file and the Jpegs you will be fine.
    You should not have a problem with this file.

  • Problem with model ES1

    I hear annoying staticy and screeching noises when I'm scrolling up and down on a webpage or opening a new program. The trouble is the website doesn't seem to have any support of this product for some reason and the model number isn't even listed. If their is anything I could do to get rid of the sound or to update it so it stops that would be great.

    I agree with Ashutosh, you have to remodeling your model. You can also try to restart VC and deploy your model again, this might also help sometimes (I had sometimes the issue, that I removed any components and then I get the 32K error, after restarting the error disappeared).
    You can also check if you have any global entry list, which you do not use in your model, this also could help to reduce you model size.
    Best Regards,
    Marcel

  • Problem with table size (initial extent)

    Hi,
    I have imported a table from my client's database, which shows the following size parameters as displayed from the user_segments table :-
    bytes : 33628160
    blocks : 4105
    extents : 1
    initial_extent : 33611776
    next_extent : 65536
    The number of rows in the table is 0 (zero). I am wondering how the table size could become so large, while other tables in the schema in the same tablespace have normal initial extent size.
    I then created a tablespace with an initial and next extent of 64k each, and imported the data into the tablespace, after which the table size and the initial extent for the table remained to be 33611776. This is the problem with 4-5 other tables out of a total of 500 tables.
    Of course if i drop and recreate the table, there is no problem, and the initial extent size and the table size becomes 64k, same as per the tablespace.
    Any suggestions? I do not want to drop the tables and recreate them.
    Because of this problem, even an attempt to import a blank database is consuming 2 GB of hard disk space.
    Thanks in advance
    DSG

    I don't think you can stop the extent from being allocated when you import the table.
    Even if you try to let the table inherit storage parameters from the tablespace, it will still allocate as many 64K extents as it needs to get to the 33M size in the table's (imported) storage parameter. I have also seen that when trying to change storage during an import like that, you can look in dba_tables and see the table has an ititial setting of 33M even though when you look in dba_segments you'll see that every extent allocated was in fact 64K. The dba_tables table is getting populated directly from the import and will therefore report the wrong number.
    Perhaps you can import then create table as... to put the tables in a better storage set up. (Letting tables inherit from the tablespace is the best way to go...no fragmentation that way). You might want to get the client to let you revamp the storage since theres no good reason to have one huge extent like that.

  • Problem with screen size in Premiere Pro CS5?

    I'm making a movie in Premiere Pro CS5 and I've ran into a problem with the screen size. The source screen shows my footage in widescreen (16:9) but my project screen is playing the widescreen footage in standard size (4:3) so it is cutting off some of the footage from the screen. I would like to make my entire project standard size so how do I do that? (Most of the chopped off footage was adjusted in After Effects so does that have anything to do with it?)
    Thanks for any help you can give!

    The properties of the footage are:
    872 x 486
    00;00;25;00, 29.97 fps
    48000 Hz - 32-bit Float - Stereo
    The properties of the sequence are:
    Editing Mode: DV NTSC
    Timebase: 29.97 frames/second
    Video:
    Frame Size: 720 horizontal 480 vertical 4:3
    Pixel Aspect Ratio: D1/DV NTSC (0.9091)
    Fields: Lower Field First
    Display Format: 30fps Drop-frame Timecode
    Audio:
    Sample Rate: 48000 Hz
    Display Format: Audio Samples
    Video Previews:
    Preview File Format: NTSC DV
    Codec: DV NTSC
    Width: 720
    Height: 480
    I'm also quite a beginner at Premiere Pro and basically all the Adobe programs, so are there any good websites (preferably free) that give good help and information for beginners like me?
    Thanks!

  • Do you see problems with text size when importing from Photoshop?

    Hi all -
    We're working on improving some things in the Photoshop-to-Reflow workflow, and right
    now specifically investigating trouble with imported text.
    Aside from the desire to have support for local fonts, are there any problems you run into
    when importing text from Photoshop into Reflow? We've heard some issues with text size and position,
    but want to make sure we understand all of the cases.
    If you have problems in this area, please share them in this thread, and I'd also love to get some
    sample PSDs that demonstrate the problems. (You can send them directly to me; vmitnick at adobe dot com .)
    thanks,
    Vic

    I'm using CS4.. and I'm using the standard "Save As" .pdf features....
    and I'm reading it with adobe acrobat pro 9.1...
    i think it has something to do with compression. but i can't figure out how to solve it. converting the text to symbols maybe?

  • Problem with export size @ Premiere CS3

    Hello, I have a problem that until recently did not bother me so much and that the final export @ the premierCS3 ( also @ CS4 and CS5 )
    The films I make are 5-10 minutes long, so usualy the final size is big, but still not THAT BIG! and i can work with this size.
    Lately  I've edited a feature film and the final export is 25GB and it simply  intolerable that even after encodings using simple software I got to 7Gb and quality went down significantly.
    How do I solve this trouble? I do not think that movie that long (1h:45m) should be bigger than 1GB!!
    Hope you can help me
    Wishing you a good week,
    ROEi.

    Go to the PPro FAQ List http://forums.adobe.com/community/premiere/faq_list and read about export options
    A DV AVI file is about 13Gig per hour... export size is determined by the CODEC and compression used, plus the data rate
    Some CODECS have better compression than others, and a higher data rate will create a larger file
    You need to tell what CODEC you are using for export, and what data rate

  • Problems with setting size of VI

    Hi all,
    I have a problem with trying to resize and position my VI. What I want to do is use data from the screen size and another VI to create the size and position of another VI so that I can display them next to each other, no matter what the screen resolution is. However if I try to set the bounds of the VI window or panel, I always get an error and although the window ends up in the right position, the size is not correct and changing the input values to get the size (right/bottom) does not seem to do anything.
    I have added three screenshots. The error2.PNG is of the error that occurs, vi-bounds2.PNG of the block diagram code that I use. It kinda works if I link up the clear errors vi, but I think this is not the way to go. vi-bounds-noerror2.PNG is of code from another VI which does not lead to any errors. I do not see the difference however, because I tried setting the window bounds as well as the panel bounds but the error stays the same.
    I hope someone can help me!
    Thanks, Steph.
    Message Edited by StephK on 02-12-2008 07:02 AM
    Attachments:
    vi-bounds-noerror2.PNG ‏11 KB
    error2.PNG ‏13 KB
    vi-bounds2.PNG ‏15 KB

    How many monitors do you've got?
    If you got just one, the top and bottom will be 0...
    You read the size of the second monitor.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • DVD Studio Pro - Problem with video size

    Hello all,
    I'm having a problem with dvd studio pro.
    I have a project that I edited in FCP, then compressed to the default DVD setting in compresser, then imported the video as an asset in DVD studio pro. I'm trying to create a SD dvd, and whenever I simulate the dvd, the video plays with some of the left side cropped out. I have text that is cut off because of it. This has never happened before, and I have checked again and again to make sure its all set on SD. I'm pretty new to fcp studio, i'm teaching myself as I go and this is driving me crazy. I have made a bunch of dvd's prior, and this has never happened, so I have no idea what I did to mess things up.
    For all I know, the problem may not even have to do with dvd studio, it may be in compresser. I have also played around with that, to no avail.
    Thanks for the help!
    Thomas

    Thanks Javabob,
    That is a way good idea. While trying your suggestion i stumbled upon the problem, I have no idea why i never noticed this before. When i got to the step of importing it as an asset into dvd studio, i clicked on the video track and the inspector box for it showed up, then i noticed it had a display mode drop down menu set on '16:9' pan-scan. I then changed it to 16:9 letter-box and the simulation video fits correctly onto the screen. I don't really understand the reason why pan-scan blew it up like that, but it is fixed now. I still don't recall ever having to do this before, but oh well. I will pay attention to the inspector window for the videos more carefully from now on.
    Thanks for the help Javabob!

  • Printing Problem with Model HP Deskjet 2640 Series

    To Whom It May Concern, I am having problem with printing. There is always  a notification from the printer says" A footer of section list ser outside the printable area".Please advise. Thank you

    Hello @Tellen,
    Thank  you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
    First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
    If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. If you print a test page from the front panel do you see the same issue?
    I hope to hear from you soon.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Problem with models in the enterprise service builder

    Hi all,
    I get this message from the enterprise service builder, when i double click on one of the models on the tree on the left of the builder itself.
    the message says:
    Error Initializing Business Modeling
    Initialization of business modeling cannot be started. You cannot work with business modeling. Check tht all required configutarion objects are available
    i made all the wizards suggested in /people/werner.steyn/blog/2008/03/03/how-to-look-like-a-hero-with-netweaver-ce-esr-sr
    please someone can help me to understand what the massage means?
    what is a configuration object? what can i do to fix the problem?
    thank you very much

    closed

  • HP Color Laserjet 2550N problem with letter size documents

    If user sends a Letter size print job to the printer loaded with A4 paper printer fails to print until we hit the continue button even if the "Auto Continue" feature is selected. This feature is important because even if A4 is the standard paper size here in AU, most of the microsoft application defaults to Letter (we get lots of document from outside source and constantly hunting them down and changin them is not the viable solution).
    We have lots of complain about this because half of our users who uses PC don't have this problem, so the source lies in the OSX driver for this printer. The printer driver setting also has a feature called "Paper Matching" which is set to "Nearest Size and Scale" which doesn't work as intended. After dealing with HP for about a month and a half they have refused to take any responsibility regarding this issue and blamed OSX. Any advise would be great.
    IMac G5   Mac OS X (10.4.5)  

    Hi, from HP's official site:
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=446154&lang=en&cc=us&prodTypeId=18972&prodSeriesId=446153&taskId=135
    it seems that HP has not released a compatible driver for Windows Server 2008 yet. You may need to contact with HP support to see if they have a latest driver for Windows Server 2008 or if they have plan to develop a Windows Server 2008 compatible driver
    for this printer. You can visit the following HP support site:
    http://www8.hp.com/us/en/support-drivers.html
    Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for