Problem with modulus size in MS CA and PIX 515
I have create a MS CA whit a root Certificate 4096 bit, the result during ca authentication (PIX 515-UR v.6.3.3) is the following:
CRYPTO_PKI: Error: Invalid modulus length in public or private key while
CRYPTO_PKI: WARNING: Unsupported certificate or CRL signature algorithm while ve
rifying self-signed cert signature
CRYPTO_PKI: WARNING: A certificate chain could not be constructed while selectin
g certificate status
CRYPTO_PKI: Error: Code 0x0000 while selecting self signed certificate
CRYPTO_PKI: WARNING: Certificate, private key or CRL was not found while verifyi
ng cert in message by issuer self-signed cert
CRYPTO_PKI: WARNING: A certificate chain could not be constructed while selectin
g certificate status
CRYPTO_PKI: Error: Code 0x0000 while selecting self signed certificate
CRYPTO_PKI: WARNING: Certificate, private key or CRL was not found while verifyi
ng cert in message by issuer self-signed cert
CRYPTO_PKI: WARNING: A certificate chain could not be constructed while selectin
g certificate status
CRYPTO_PKI: Error: Code 0x0000 while selecting self signed certificate
CRYPTO_PKI: WARNING: Certificate, private key or CRL was not found while verifyi
ng cert in message by issuer self-signed cert
CRYPTO_PKI: status = 324: failed to verify
CRYPTO_PKI: transaction GetCACert completed
Crypto CA thread sleeps!
CI thread wakes up!
With modulus 1024 or 2048 don't have problem.
Why? Is a limitation?
PIX currently only supports a maximum key size of 2048 bits. I don't believe there's any works under way for it to support 4096, so if you would like this feature then please feel free to contact your Cisco Account Manager and have them raise a feature enhancement.
Similar Messages
-
Problem with Cell size in Excel output of XML report
Dear all,
I am facing a problem with cell size when i run my XML report in Excel output. I found that it imitates the cell size of whatever i gave in the RTF. I cannot increase the cell size in RTF as my report contains 60 columns and max width of MS Word table is 22 inches.
Can any one suggest a way of doing this which shows full data in Excel sheet depending on the column data size with out any word wrap.
Thanks
RAJHi ,
You can try with
<xsl:attribute xdofo:ctx="block" name="wrap-option">no-wrap</xsl:attribute>
may be helpful to you
Thanks,
Ananth
http://bintelligencegroup.wordpress.com/ -
Problem with font size, not showing up as expected.
I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
http://www.kgngroup.net/logos_and_packaging.html
I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
Not sure where to go from here. I just want to get the body font down to 10 pixels.
TIA,
KenJohn Waller wrote:
I guess this a follow up to your earlier thread
http://forums.adobe.com/message/3627681
What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
e.g.
The tiny font in the RHS column is affected first by
.style8 {
font-size: 0.5em;
affecting the <td> then by
.style11 {font-size: 75%}
affecting the <p> tag.
End result = tiny text (approx 2px).
In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically starting from the <body> tag downwards.
That'll give you a solid baseline without weird effects.
Ah, I find your answer worth repeating.
Very cool that you have diagnosed so well and spelled it out here.
I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
Thank You,
Ken -
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1
Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
PaoloSomewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations. -
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers
I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
Solved!
Go to Solution.
Attachments:
Pt net.zip 2183 KBThis is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
Attachments:
PID create by me.vi 312 KB
tut_3782.pdf 75 KB -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine -
I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help
wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating? -
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation. -
Problem with changing Label in Bridge CS3 and CS6
Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regardsI have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/ -
I was playing aaroound with the size of my window and now I can't get it back to standard size. Any suggestions?
If you're using Lion, you can resize by dragging from any corner, in Leopard and lower it can only be resized from the bottom right hand corner.
-
Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?
Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?
I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
Try disabling App Nap for all your Adobe App files...
Go to your Applications folder
Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
When the info window opens up, add a checkmark beside "Prevent App Nap"
Restart the application
This fixed all my performance issues.
-Pete
Maybe you are looking for
-
I have a MBpro running the latest OSx 10.8.2. I am wondering any anyone can recommend a stable USB video Adapter. I have recently tried using display link and other such devices however when Mac OS updates the drivers seem to lag on there compatibili
-
Why in QuickTime there is no option to disable launching it at startup?
It's VERY irritating. There should be, i use QuickTime not everyday, so it would be easier for me if i could disable launch at startup directly from QuickTime. I would do it by myself if i could get the source code. Perhaps it would take ten minutes
-
hi eveyone to call an image we write READ_IMAGE_FILE to call a sound file we write READ_SOUND_FILE i need to call a movie file ouside the database when pressing a button my filename is ('c:\film.avi') what is the command line that achive this result
-
Under conf/_defaultRoot_ I have created another vhost xyz. I want xyz's application directory to point to somewhere other than the default Applications directory so I put the path in the <AppDir> tag in the vhost.xml under xyz. However; when vhost xy
-
Hello Community, I'm new in working with SAP DS SDK and desperately trying to create a draggable object. I have read that DS SDK does include JQuery. If I would like to modify a given coloredbox example and make it draggable (like in this example: ht