Problem with Motion 5 "Media Missing in Motion File"
Greetings,
When I try to preview templates in the Project Browser, only the ones under Compositions will play in the preview window. Anything else either the screen stays black or I get the “Media Missing in Motion File” It appears that somehow the clip I’m trying to preview has lost the path to the preview file. All these templates are stored in the Movies/Motion Templates/Final Cut Effects or Final Cut Generator folders.
Any suggestions?
Your own custom and thrid party templates do not normally have the video clip embedded to do the preview. This is normal.
Similar Messages
-
When I save file: media missing in motion file
when I save file: media missing in motion file
Dear Mr Khalid,
I modified the VI again by using the General Error Handler, by placing it after the Read from Binary File. The Simple Error Handler will be as is. When I build and ran the application the Error 4 do not show up anymore.
Attachments:
saving new data.GIF 61 KB -
Problem with the EFI system partition's file system.
I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
CheersI had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud -
Premiere Elements cause problems with Windows Media Center while streaming to TV.
I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.
-
Problem with DMGs and error: "No Mountable File Systems"
Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaiaWhere you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it
-
Problem with Windows Media Player since installing Firefox 4.0
Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.
What can I do to get the Windows Media Player to work properly?
-
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
So initially, my problem was solved, but it stopped working again. Same issue. I tried installing the media encoder app, but no luck please help!
Here's the original post:
Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up. I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance. Thanks!
Here's the error message I get:
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.Have you tried re-installing Photoshop?
Benjamin -
MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.
-
Compatibility problem with macro media flash active control
I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista). How can this be fixed? why am I suddenly getting it now? I have the latest Adobe flash player installed.
Trishathe latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.
-
File sharing problems with my Media Player, an A C Ryan
I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I can see and access all the files on the hard disks.
The moment I upgraded to Lion, all such access was lost. The AC Ryan cannot connect to the hard disks any more via the wifi network. it's as though file sharing has stopped completely. I checked the file sharing settings on the iMac and nothing has changed i.e. the disks were shared as usual. After struggling with many possible solutions and failing (I checked out a lot of forums), I reintalled Snow Leopard and the problems were immediately solved.
Is there something seriously wrong with Lion's file-sharing? Has this been fixed in 10.7.2? My friend who has a similar setup (his media player is the WD Live) has exactly the same file sharing problem with Lion.
I would appreciate any feedback. Thanks!I believe that NTFS-3G has issues with Lion.
I use Paragon NTFS and have had no issues at all. I am pretty sure that NTFS-3G will get updated, but you need to check their site to find out when. -
Problems with Blackberry Media Sync
I am the owner of a Blackberry Storm 9500 and use BB Desktop Manager v. 5.0.1 and am having problems with Media Sync. I keep getting the message that BB Media Sync has encountered a problem and needs to close.
Can anyone help?Hi Jungleboy6 and tje1976:
Somehow the default Picture Import folder path has been corrupted in your registry. We’re trying to get to the bottom of this problem. If you could give us a little more info, it would be very helpful.
Here are the steps to follow to fix this issue:
- Start->run, type ‘regedit’, enter
- Navigate the tree to this location: HKEY_CURRENT_USER\Software\Research In Motion\BlackBerry Media Sync\Settings
- You should see a setting on the right called “PictureImportPath”
Before you do anything, can you take note of what the current value in the ‘Data’ column is?
To fix the problem, double click ‘PictureImportPath’ and change the value data to a valid folder path on your computer. Ie C:\MediaSyncImportPath
Hit Ok. Close Regedit. Restart the application.
Let me know if this works. And if you could let me know the value it was set to and also your Operating System, it would help us track down the underlying problem.
Thanks.
Need additional information on BlackBerry products?
visit: http://www.blackberry.net -
Problem with FM SXPG_COMMAND_EXECUTE in deleting a file on server.
Hi All,
My Task is to delete a file with version number 6 and rename all other files, so that my new file will be version 0.
Am using the FM SXPG_COMMAND_EXECUTE to delete/rename a file on server.
Though, this is working fine in debugging mode I can see the file getting deleted in regular run, which is followed by renaming some files, it is NOT working in regular run.
Somehow the deletion and renaming are not happening correctly in regular run, but does happen successfully while in debugging.
Am I missing anything or any refresh or delay needed?
Here is my code for DELETE :
CONCATENATE P_PATH '\' P_TABNAME '_6.dat' INTO LF_FILE.
CONDENSE LF_FILE NO-GAPS.
*// Check if this file exists
OPEN DATASET LF_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC EQ 0.
*// Delete this file
DELETE = LF_FILE.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
ADDITIONAL_PARAMETERS = DELETE
COMMANDNAME = 'ZDELETE'
OPERATINGSYSTEM = OPSYS
STDERR = 'X'
STDOUT = 'X'
TARGETSYSTEM = EHOST
TERMINATIONWAIT = TERMWAIT
TRACE = ' '
IMPORTING
STATUS = RETCODE
TABLES
EXEC_PROTOCOL = PROT
EXCEPTIONS
COMMAND_NOT_FOUND = 01
NO_PERMISSION = 02
PARAMETERS_TOO_LONG = 03
PARAMETER_EXPECTED = 04
PROGRAM_START_ERROR = 05
PROGRAM_TERMINATION_ERROR = 06
SECURITY_RISK = 07
TOO_MANY_PARAMETERS = 08
WRONG_CHECK_CALL_INTERFACE = 09
X_ERROR = 10
OTHERS = 11.
ENDIF.
Regards
Raj
Edited by: Rajasekhar Dinavahi on Apr 14, 2010 11:45 AMHi All,
Problem resolved.
We need ensure all files which are opened [by OPEN DATASET], are CLOSED before trying any operation like DELETE or RENAME on the files.
Regards
Raj -
Problem with Windows media player on MAC
I got a new macbook and installed windows vista. When I wanted to play CDs on windows media player there comes a message"windows media player have aproblem..." and the window closes. I contacted the Microsoft support system and they said that the it is the problem with the mac that the Macbook is not really supporting some of the files and they told me to contact the Apple support and even then they could not solve the problem. I returned the first laptop and got a new Macbook again and even the second macbook has the same problem. Could anmy one tell me why this is happening? If your a Macbook user with windows, did you notice this kind of similar problem? Please do let me know. Thanking you.
If you have the current version of Microsoft Windows Media Player for Mac installed, there is little you can do. The WMPFM is not kept as current as the Windows version (IMO, I think MS hates Apple - and this is intentional).
-
Problem with Windows Media Player -- saving, transferring
Operating system: Windows 7 Home Premium
Product: HP Pavilion P6000 Series
Windows Media Player
Copy short videos onto a thumbnail drive from a different computer running Windows 7 with Windows Media Player. Thumbnail drive accepts files, lists and can play back fine on same computer. Take thumbnail drive to different computer also running/using Windows Media Player & Windows 7, and playback only plays back audio -- no picture. What am I doing wrong?As WMP is not a DVD player, my suggestion would be to tell your clients to never use WMP.All our DVD discs go out with a warning not to allow WMP to be used.
In most computer setups, WMP does not play back video correctly as it does not have an MPEG codec installed, or has navigational problems.
All computers that have a DVD drive fitted, will have a dedicated DVD software player installed, such as Win DVD or Power DVD, so why not use that? -
Problem with Transmitting media using JMF
Hello Everyone !!
I am working on an application called SIPSpeaker which listens for incoming calls, answer the call and plays a message. I am done with the first two parts of the application, i.e. it can successfully answers the call. I am now facing problem with transmitting audio to the SIP Phone (the caller). I am using JMF and I am trying to send the audio over RTP.
My code looks something like this....
locator = new MediaLocator("rtp://130.237.214.124:" + port + "/audio");
f = new File("C:/1.wav");
try {
ds = Manager.createDataSource(f.toURL());
} catch (NoDataSourceException ex) {
ex.printStackTrace();
} catch (MalformedURLException ex) {
ex.printStackTrace();
} catch (IOException ex) {
ex.printStackTrace();
format = new Format[]{new AudioFormat(AudioFormat.GSM_RTP,8000,8,1)};
contentDesc = new ContentDescriptor(ContentDescriptor.RAW_RTP);
processor = Manager.createProcessor(ds);
waitForState(processor,Processor.Configured);
processor.setContentDescriptor(contentDesc);
processor.getTrackControls()[0].setFormat(format[0]);
waitForState(processor,Processor.Realized);
try {
sink = Manager.createDataSink(processor.getDataOutput(),locator);
System.out.println("6");
} catch (NotRealizedError ex) {
ex.printStackTrace();
} catch (NoDataSinkException ex) {
ex.printStackTrace();
processor.start();
try {
sink.open();
sink.start();
} catch (SecurityException ex) {
ex.printStackTrace();
} catch (IOException ex) {
ex.printStackTrace();
we are required to work with a .wav file as input ....
i am new to java and to JMF and i have absolutely no idea whats going wrong...
please help me
Regards,
Sanjay !!Hello
following is the error i get
Failed to realize: com.sun.media.ProcessEngine@618d26
Cannot build a flow graph with the customized options:
Unable to transcode format: mpeglayer3, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 16000.0 frame rate, FrameSize=32768 bits
to: mpegaudio/rtp, 8000.0 Hz, 8-bit, Mono
outputting to: RAW/RTP
Error: Unable to realize com.sun.media.ProcessEngine@618d26
what could be the problem ???
Maybe you are looking for
-
So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist t
-
I cannot import RAW photos from my Olympus EPL-2 camera. I am using iPhoto 7.1.5. I read that iPhoto has to update their system and add each camera to be able to import RAW photos from it. If this is true, how can I let Apple know to add my camera
-
I try to play a song, but iTunes has changed the information on the file
After installing iCloud, my iTunes suddenly started changing the information on my music files. I would go to play one song, but another song would play instead. I have a PC. Does anyone have any idea what the cause and solution might be?
-
Hi All, I am new to SAP B1, I want to know how can SAP B1 server & the B1 client be made to communicate via internet. Example: The server is at the head office and the client is at the warehouse (a completely different location). Please Advise, also
-
Previous backups useless?
In the backup directory there are files that are from various dates, all the way to 7-6-2005. "report obsolete" doesn't mention these files. Our RMAN scripts call "delete obsolete" every night. Why would this be happening? We run level 0 incrementals