Problem with MPEG-4 video file in N70

I wanted to transfer MPEG-4 video files from my computer to my N70 phone. I put the files to the same place where others videos are, and when I tried to watch MPEG-4 video it complained that the phone can't repeat it.
I checked from nokia sites that my phone should actually repeat them with RealPlayer, but for some reason i cant watch the video, allthough all my other videos which i've taken with my phone are also MPEG-4. So is there anything i can do??
Sorry for my bad english. Im from Finland and 15 years old, so ...

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

Similar Messages

Synching audio problem with MPEG-4 video in QuickTime

Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
Leo

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

I've had a problem with previewing rendered video files

Hey guys, I'm Justin,
thanks in advance.
so when I render video files in fce, the video usually renders fine, but on the canvas the video just replays the first and last frame of the rendered video, making it look like a jumbled mess. but, when I export it as a quicktime file it runs just fine, I think the problem is in my canvas and I don't know how to fix it.
Also I recently upgraded my system from 2gb of ram to 4gb of ram, can fce recognise this or do I need to do something fancy
Thank you so much,
Justin

Hello, Justin, and welcome to the forum.
Where is the video coming from and how are you getting it into FCE? Almost always, your best bet is to convert your media into a format with which FCE works natively before you bring it into the program. If you do that, rendering and lots of other issues are minimized.

To Decode and play MPEG-2 Video files with JMF

Hi ALL,
I amin serious trouble with a problem. I am developing a Simulator, a function of which is to decode MPEG-2 Video files in real time and play it as well.I have got a MPEG-2 Decoder implemented in C from an open source and need to integrate with my Simulator which is writtebn in Java. The integration part I am doing via JNI(Java Native Interface). Now I have a bunch of C files in MPEG-2 decoder which are to be compiled during the Execution of the Java Simulator.Can anybody give some idea about how to call multiple C files from the Java Source through JNI at one go? Another problem I am facing is in calling a single C code from the traditional "HelloWorld" Java Code itself. The problem comes when I am trying to compile the shared library between the C native code and Java Code in my Linux Machine...I am getting the following message:
/usr/lib/gcc-lib/i386-redhat-linux/2.96/.../../../crt1.0 : In function '_start' :
/usr/lib/gcc-lib/i386-redhat-linux/2.96/.../../../crt1.0(.text+0x18): undefined reference to 'main'
collect2: ld retrurned 1 exit status

Duplicate; reply to http://forum.java.sun.com/thread.jsp?forum=54&thread=478434

MPEG-4 video files won't play in Quicktime

I bought movies on iTunes and I can only watch them on my iPod. I can't view the movies with Quicktime or with iTunes. The movies are MPEG-4 video files. Any suggestions? I can't figure it out.

I solved my problem with MP4 and MOV files not playing on my Windows XP Pro PC.
Short solution: Reinstall latest NVIDIA driver from NVIDIA not Microsoft.
A few days ago, I decided to rebuild my PC from scratch, after deciding to change from Norton to McAfee for performance reasons. I reinstalled Windows XP Pro from the installation disks and performed Microsoft Update to bring it up to current. I then manually installed all optional software and hardware "updates". Installing the optional video driver turned out to be the cause of the problem, but I did not know it then. It was a very obsolete driver - NVidia Corportation – Video – NVIDIA GeForce 3 Ti200 released on July 28, 2003
I downloaded and installed Quicktime with iTunes which installed QuickTime 7.4.1 and iTunes 7.6.0.29. Neither would play MP4 or even MOV files. I got garbled, scrambled, blocks of colored video. Audio would play OK.
A re-install of QuickTime did not help and both products said they were up to date.
A temporary quick-fix was to uncheck DirectX - Enable Direct3D Video accelleration in QuickTime-Edit-Preferences-QuickTime Preferences-Advanced, or select Safe Mode (GDI only).
The permanent fix was to update the video drivers and NOT use the Microsoft supplied update. I went to www.nvidia.com, selected "support" on the taskbar, clicked "download drivers", entered product type=Legacy and GeForce3 Series and Windows XP and clicked Search. That found ForceWare Release 90 version 93.71 dated Nov 2, 2006. It supports a huge number of NVidia cards. I downloaded it and installed it and everything worked after that.
To prevent Microsoft Update from re-installing the Optional Hardware video driver, run Microsoft Update manually (e.g. from IE-Tools-Windows Update) click "Custom", select Optional Hardware, Expand the NVidia Corportation – Video – NVIDIA GeForce 3 Ti200 released on July 28, 2003 and check "Don't show this update again". Then close Microsoft Update. (while you are at it, do the same for the optional audio update. That really messed up my system)
I hope this helps at least a few people. Good luck.

Some Mpeg 4 video files not working under Window 7

I recently purchased a new PC running under Windows 7 OS. Obviously I have installed the latest version of ITunes and QuickTime player. I transferred all my music and video files from my vista laptop to the PC. The music files play fine using ITunes and the most recent music video files play ok too, but there seems to be a problem with the older music video files. When I try to play one of the older music video files, ITunes asks for authorization for the new PC to play the video each time I try to play the same video. ITunes grants authorization each time, but the video does not play, it shows that the video is playing on the progression bar but the music video is not displayed.
I have tried to play the music video using windows media player, but windows media error message says that it doesn't support the format of the music video.
I am perplexed as to what is going on; why will the newer music videos play through ITunes and not the older ones, and why doesn't windows media player support Mpeg 4 video files?

This article says you need to convert the AOL account to an apple id.
http://support.apple.com/kb/TS1299

I have iMovie '11, and I am unable to access mpeg HD video files that I want to edit. The files are fine (I can open and watch them using VLC), but I cannot seem to import the files into iMovie. File Import does not work. Any suggestions??

More detail: I have a bunch of mpeg HD video files that were shot on a SONY HDR-HC3 Handycam camcorder. I would like to edit these into a single video production. I can access and view the mpeg files using VLC (Quicktime does not work with them). However, I seem to be unable to get the mpeg files to interface with iMovie '11 -- I cannot use the File --> Import command, nor can I drag-and-drop them into iMovie.
Is there something anyone might suggest to get this to work? Or are these files incompatible with iMovie? If so, I assume I must purchase a different video editing software program (e.g. Adobe Premeir Pro). Suggestions???
Many thanks in advance for your time and consideration

Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each.
    To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation? Maybe there will be one I haven't looked at yet.
    Thanks

Ideas and Suggestions for Working with Low Res Video Files

Hi,
A client has asked me to take all of her low res videos she shot with her iPhone and put them on a DVD.
I've made her aware that the end result is not going to be a Hollywood production. I even did a test for her to show the difference between a low res clip and a HD clip. You can see these clips here:
http://designerandpublisher.com/hs/lowrestest.mp4
and
http://designerandpublisher.com/hs/hdtest.mp4
She understands and will fix her camera to shoot high-res next time. Anyway, the footage (330 minutes) I have looks like this when imported into Premiere Pro CS4:
I first just set up a 640x480 timeline and imported one of her clips. It doesn't look too bad. I'm not sure why that green bar is there:
Then I went into the timeline's properties to see if I can somehow enhance it once it goes onto a DVD via Encore:
But i'm not really sure if it's worth fiddling around with a customized timeline. I don't have my hopes up though but I'd appreciate it if anyone could tell me what they did in this type of situation. It seems like the 640x480 timeline, once brought into Encore and transcoded for the DVD, may work best.
Any ideas are appreciated. Thanks.
The Deaf Guy

I don't edit video from a cell phone, and you don't mention any particular problems loading/editing... but in case you do have general problems with any of the files, some reading to keep in mind
Iphone won't edit easily because it uses a variable frame rate - A fix in message #22 http://forums.adobe.com/thread/934466

Album/playlist downloaded from iTunes includes mpeg-4 video file?

I have downloaded from iTunes an album that includes an mpeg-4 video file? What is the best medium CD or DVD and format for burning the playlist? Assume it could be played on a CD player (for sound only) or a DVD player.

Handbrake includes a universal setting which makes the video compatible with the iPhone/iPod, Apple TV, and with iTunes on your computer. It also includes an iPhone/iPod compatible setting.

Upgrading to iTunes 10.6.0.40 imports MPEG-4 movie files as "QuickTime movie file" not "MPEG-4 Video file"

Recently updated itunes to 10.6 and since then adding any new MPEG-4 Video file itunes is flagging as QuickTime.
This creates an issue since my Apple TV doesn't recognize these types of files in iTunes.
To validate it's the itune upgrade, previous "MPEG-4 Video file" entries added and played on Apple-TV were imported an now show as "QuickTime Video file"
Thx

This problem has been resolved after the ATV update was received.
The ATV now recognizes the videos marked in itunes as Quick time eventhough they are Mpeg-4 video files.

Problem Uploading and Sharing Video Files

I just uploaded a 3.3GB h.264 Quicktime movie to Creative Cloud. It took many hours. Now that it's finished uploading, I can't figure out how to play the video while logged into Creative Cloud, despite that fact that under information it's recognized as a mov and 3.3GB. And when I try to share using the link-in-email option, my friend can't play the movie or download it. When he tries to download it, nothing connects. Creative Cloud seems to be treating this movie as a single still image or something. Suggestions as to how to solve these upload and share video problems? I have a 2011 MacBook Pro with all possible upgrades, Mac OS X Version 10.6.8. Any help here much appreciated. One of the reasons I signed on for a year with Creative Cloud was to utilize this 20GB to share video in the way I've done through Dropbox.

Thanks for the reply, Dave, but I don't think this is the problem. I've uploaded this h.264 Quicktime (which plays fine before uploading) a few times now and cannot download or share due to a very long period of "Connecting...", then the message "Problem loading page. The connection was reset. The conection to the server was reset while the page was loading. - The site could be temporarily unavailable or too busy. Try again in a few moments. - If you are unable to load any pages, check your computer's network connection. - If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web." Then I'm given the option to "try again". This or a similar message is what others get when trying to download when I try to share the file with them using the link-in-email method, and neither I nor any of those I try to share this with are having problems with internet connectiions or downloading other large video files from the internet. The reason I suspect that Creative Cloud can't deal with downloading larger files such as this 3.3GB Quicktime is that I have no problem uploading, downloading or sharing small Quicktime movies through CC, and they are identified the same way and look the same when uploaded to CC. I also have no problem downloading much larger video files from other sites on the internet, such as feature length films that are a lot larger than 3.3GB. It seems like only things that download quickly don't time-out, regardless of what browser I'm using. Does Creative Cloud's download system rely on files being able to be downloaded quickly in full before a browser's time-out? As I've mentioned before, I have no problem uploading, downloading, sharing, etc. using Dropbox. Long explanation here, I know, but I thought all this info might help in figuring things out. Any ideas as to what's going on?

MPEG-4 video file format and IMOVIE.....help!!

I am completely new to IMOVIE and I am trying to import and DVD into it. I used ROXIO CRUNCH to convert a VIDEO_TS folder to use in IMovie. It converted it into a MPEG-4 Video file which is completley pixelated and not viewable. However IMovie did let me import it. What do I need to do?

Handbrake includes a universal setting which makes the video compatible with the iPhone/iPod, Apple TV, and with iTunes on your computer. It also includes an iPhone/iPod compatible setting.

Diff between "MPEG-4 Video File" & "MPEG-4 Movie" (PC) ?

iTunes seems to play both video types. I have several dozen of each on my PC. Both are in my iTunes "Movies" folder and all are video.
The "MPEG-4 Video File" icon is the little music note on top of a CD with "MPEG 4" under it.
The "MPEG-4 Movie" icon is a little "Q" in what looks like a film frame with "MPG4" under the Q.
Is there difference in the way iTunes handles either and should I save video files in one mode or the other? Why?
Thanks!

Handbrake includes a universal setting which makes the video compatible with the iPhone/iPod, Apple TV, and with iTunes on your computer. It also includes an iPhone/iPod compatible setting.

Asc 2.0 crash with large embedded video file

Hello,
asc 2.0 crash with large embedded video files
package{
import flash.display.Sprite;
public class Main extends Sprite{
    [Embed(source="video/myVideo.mp4", mimeType="application/octet-stream")]
    public var video:Class;
    public function Main(){
on Windows with a small video, it compile fine, with a large video (525 Mo) the compiler crash
internal error : java.lang.NullPointerException
        at com.adobe.flash.swf.SWF.addFrame(SWF.java:91)
        at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation
.createFrames(SWFTarget.java:876)
        at com.adobe.flash.compiler.internal.targets.AppSWFTarget$AppFramesInfor
mation.createFrames(AppSWFTarget.java:386)
        at com.adobe.flash.compiler.internal.targets.SWFTarget.build(SWFTarget.j
ava:243)
        at com.adobe.flash.compiler.clients.MXMLC.buildSWFModel(MXMLC.java:674)
        at com.adobe.flash.compiler.clients.MXMLC.buildArtifact(MXMLC.java:660)
        at com.adobe.flash.compiler.clients.MXMLC.compile(MXMLC.java:541)
        at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:230)
        at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:184)
        at com.adobe.flash.compiler.clients.MXMLC.staticMainNoExit(MXMLC.java:15
6)
        at com.adobe.flash.compiler.clients.MXMLC.main(MXMLC.java:143)
Thanks

java.lang.NullPointerException
i met this error every time if i compile a "BIG " project.（with 1G+ image resources）.   And also ,if you import 500+ images into Flash CS ...you know ,its prefix is "Adobe".
i guess , it's because somebody not like "BIG " thing.
So..on 32bit windows platform ..i upgrade my JVM to 1.7 ,and..modified -XSS value . it will help us ..but not 100% resolved.
Finally ,i upgrade to 64bit platform ..this problem seems gone.
I think ,it's because of the bad RAM Manager of JVM. on 32bit windows machine .it's only can manager 1024M ram .(such a stupid VM).   And on 64bit platform ..JVM seems to be d normal.

Problem with MPEG-4 video file in N70

Similar Messages

Maybe you are looking for