Problem with MSI 865P Neo and G4 Winfast

Hi all,
I bought the mainboard MSI 865P Neo. Have put it into G4 Winfast A280 LE TDH my vivo. And the problem appeared.
When I doing whatever in Win (for example open explorer, mouse rightclick ...) the screen is simply runing over.
Seems like a video card doesn`t handle it or Screen (monitor) is poor but it`s not. The same problem appears also while Windows is installed.
Little note I want to add is my G4 has new Bios setup and on my second card Leadtek G2 MX everything`s ok. It seems for conflict between the mainboard and my v-card. Have you met similar problem ?
Would be grateful for an answer
Best regards

On my old mainboard - ABIT ST6R (with G4) everything was ok. I changed mainboard, RAM and P4 and problem has appeared.
MSI supports AGP 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V (3.3V not supported)
If G4 needs 3.3V (I can't find G4 how much needs) that problem is obvious. I must change mainboard.
Anyone knows how much G4 poverage needs?
P4 2.4
MSI 865P Neo
G4 Winfast A280 LE TDH my vivo
512 RAM Kingstone 333Mhz
Barracuda IV 80Gb
Barracuda III 40Gb
LG DVD
LD CDWR
SB Live
POWER 300W

Similar Messages

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

Problems with msi k8n neo-2 and xfx 6800 card

is this card incompatible with the msi k8n neo-2 motherboard?
i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
What can i do?

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

VCORE PROBLEMS WITH MSI P35 NEO F

To see if I can help or at least explain what's happening, buy a MSI P35 NEO F for using a quad, the topic is as follows handling vcore is rare
First thing I can not put less voltage that the cpu brings default, second what happens next if bios setting 1.3250 vcore for Quad, once in both windows everest, cpuz, like others programs tell me that this placed on 1.40 vcore which is excessive for the speed at which the quad, this is so in this mobo? Their story that was installed version 1.20 bios which handled vcore%, the upgrade to version 1.40 and is now handled in decimals (numbers) vcore, but still the problem
You pull more vcore which setting in bios and if you want to download the vcore eg put 1.26 vcore not let you because it takes the vcore default of cpu minimum.
i'm not crashing or problems with the temperatures, but nobody likes to have more vcore's necessary.
Wonder because being rookie of this mobo, maybe there's some bios version that fixes this bug or someone knows something else, thank you guys
C2Q Q6600
2 X 1GB G.SKILL 6400
PSU 550 MODULAR TOPOWER
-- SORRY FOR MY ENGLISH --

You can slap 1.6v in that CPU and temps won't rise that much.
Core 2 Duo/Quad operates @ 1.250-1.425, anywhere in between those values is perfectly stable for Intel stock cooler and frequency.
Absolutely nothing to worry about. But if you want to complain about >1c I really can't see the sense in that.

Problems with MSI P31 Neo mobo

Hello all,
I just received my new MSI P31 Neo motherboard today and have spent nearly the whole day trying to get it to work.
My problem is that when you turn the system on about 4/5 times there is no graphics displayed what so ever. When the graphics do come on and you can go through the BIOS it quite often jams. If occasionally you do get past that, when the Windows XP disc starts to load the files for the installer, it Jams and you need to restart, restarting this long process.
My CPU is supposed to be supported, it's a 3.6ghz Intel Pentium 4 chip. I am using 4 x Samsung Original 1024MB DDR2 PC5300 RAM though it only shows 2gb of it in the BIOS. The graphics card is a NVIDIA GeForce 7300 GT 512MB PCI-E.
Can anyone tell me how to get this mobo to work? Things to try? Otherwise I think I will just have to send it back...
techie5487

Quote from: techie5487 on 24-January-08, 07:34:41
UPDATE:
I tried booting with 2 RAM Chips and it works great! This seemed to be the problem.
The ram IS double sided which would explain it.
If you are wanting some more system specs, just ask and I will try and get the most I can.
Del UK:
If I could run 4gb it would be great but I cannot seem to find the SPD in bios. My BIOS is American Megatrends Inc. v02.61 so it would be great if you could help me with that!
If all else fails I might either just settle with 2GB or buy some new RAM chips. Can anyone please tell me some Ram chips which would be able to give this mobo 4GB?
Thanks
techie5487
Done
2 Gb in
Into bios
SPD off
Set to 5-5-5-15
Save settings
Power off
Install extra 2 x 1Gb modules into slots 2 & 4
Power system up
4Gb detected................. slow post not fast
3.25Gb checked
1 second delay
4096Mb
3.25Gb extend
768Mb in +4Gb
System sees 3.25Gb

Clock speed problem with MSI K8M Neo-V

Hi all,
I'm a newbie on all this tasks of mounting my own PC, so I'm very sorry if my question is stupid and is already answered in the forum (I didn't find it).
I have the following components:
- MSI K8M Neo-V
- 2 SATA HD 160 Gb
- AMD Athlon(tm) 64 Processor 3200+
- 512 MB (PC3200 DDR SDRAM)
My problem is that I cannot get my AMD 3200 to run at 3200 Mhz. What I
only get is:
- CPU ratio x11
- CPU FSB clock 210
- Dynamic overclocking colonel (my BIOS doesn't have general or
commander, as shown in manual)
That makes a total of 2.31 Mhz, far away from the 3.2 desired.
If I try to change this values to others higher (such as FSB 230), I get a black screen
and I need to reset BIOS.
Please, could you help me solve this situation? I find it really
disturbing to have bought a new AMD 64 3200 with a good motherboard,
and not being able to make it run at the appropiate speed.
Thank you very much in advance.

3.2GHz. Wow. I would kill to have an A64 at that speed. :D
Quote from: Tiresmoke on 14-April-05, 23:19:47
AMD's don't run at the speed they have listed on the CPU, rather that is a performance equivalent number. In this instance your CPU has the equivalent performance of an Intel that runs at 3200Mhz.
Actually I believe the Performance number equivalent to the MHz an AMD Thunderbird would be at, NOT an Intel CPU.

Problems With MSI K8N Neo Platinum

Posting some probems I have face and wondering if you folks have experience similar problems. I bought 2 and bot hahve same problems (sold both of it). Another friend of mine have also same problems with the board.
1. SATA 1/2 don't work properly. I have detection problems using SATA ports 1/2. The comp will not detect my IDE devices and hang at POST screen. Reboot/reset don't solve the problem. I have to turn off and on to get it to work. Problem is only sovled after switching to SATA 3/4.
2. Network disconnection problem. The NIC will auto disconnect and reconnect back by itself, esp. when under overclocked conditions.
3. Cannot overclock much using DIMM slot-1 esp. when mem is over 230MHz. Must change to slot 2/3. Even so, I do face BSOD stating an USB driver is the cause of the issue.
4. Comp will sometimes unable to reboot at FSB between ~210-240MHz. 250Mz and above seems OK.
Now, I am using Abit KV8 Pro 1.1 and it works fine though. No FSB reboot issues. I am using 1.1 with latest BIOS, thus not AGP/PCI lock issues. Hope MSI will fix those problems mentioned ASAP cause my Abit don't work with mobile A64s. :(

Seriously, I have absolutely no idea. It may be a QC problem, it may be a design problem, its may be BIOS or others. The only thing I know that after I jump ship to Abit KV8 Pro 1.1, all these problems are gone. Only problem is that Abit don't support mobile A64s.
BTe, just another problem or maybe over conservative restrictions. When using DDR333 RAMs, the BIOS will not allow you to manually set it to 400. Thus at 200MHz FSB/HTT, your RAM is stuck at 166MHz. Pretty stupid restriction I have to say.

Problems with MSI K8N-Neo3 and Command Queing.

I had some problems with two computers, based on the MSI K8N-Neo3 mainboard - they wouldn't boot into Windows after installing the drivers for the graphiccards. Before the breakdown of the forum, some people suggested that I was using to small PSUs. In the meantime I've solved the problem, by disabling the Command Queing feature in the drivers. Seems there may be a problem with the MSI board, and Maxtor SATA drives with Command Queing.
Key system components for the two computers:
AMD Sempron 3000+
MSI K8N-Neo3
1 GB Kingston PC3200 DDR-SDRAM
MSI GeForce 6600GT or MSI GeForce 6600LE graphics
Maxtor 120 GB SATA disk (6L120M0)
Sony DVD-RW drive
Anyway, I wanna say thanks for the quick answers...

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

Problem with MSI K8T NEO-FIS2R

When I boot my computer I get a message invalid boot.ini then it says c:\windows and windows starts normaly. What I don't understand is why do I get invalid boot.ini Anyone knos how to fix this?

I'm sorry for no specs. Here you go
MSI K8T NEO-FIS2R
AMD 64 3000+
2X 512MB 400MHz Ceon CL=2,5
HDD 120GB WD
HDD 4GB SEAGATE
CDR DVD-RW NEC ND3520
CDR SONY
400W POWER SUPLY
primary master CDR DVD-RW
primary slave NONE
secondary master CDR SONY
secondary slave HDD 4GB
and last HDD 120GB on primary raid
NONE on secondary
I have ORIGINAL windows xp with sp2 on 120GB HDD. I bought this computer and they put windows xp on my system.

Problem with msi pt8 neo-v and sata drive

hi, i have a hitachi 80gb sata2 drive( its configured to work as sata1 to work properly on the motherboard) and the msi pt8 neov motherboard, the problem is that the transfer mode is showing incorrectly on hdtune and everest plus it doesnt give the features right, like shown in the image below. everytime i open hdtune gives me a different transfer mode and features get ticked/unticked.
ive tried the disk on another pc i have and it shows info correctly so it cant be the hard drive, what could be causing this?
i have installed the hyperion 5.13a drivers and tried too with the microsoft drivers, still the same.
hope someone can help me out as is driving me crazy!
oh one last question, in bios settings i see the sata drive( just using one) as bbs-0(raid) HDS728080pla380 why is that? ive tried disabling "bootrom function" under Sata controller but then it wont recognize it, is there a way to change this??

Quote from: duhast1 on 13-October-07, 06:28:13
SATA Transfer mode, it changes everytime i open hdtune AND features get ticked unticked everytime i open hdtune as well, like if transfer mode was changing constantly
Unless, you use your disk purely to benchmark, your transfer rates will dynamically change. As data is written to drive or removed.........
Everything is working fine

Big problem with MSI K8N neo 2!!!

I don't know what it is, but it's a big porblem that many people have with their new K8N Neo 2 Pl motherboard. The problem is that the system freezes and you must push the power button or the reset button.
It happens randomly, when i move my mouse, when i am copying something, when i download something.
I have already updated my bios, with no result. My brother has totally the same specs like me. We bought it at the same time and he has no problems and my pc freezes all the time.
What could it be?
specs:
3800+
POV 6800 Ultra
Twinmos Matched 1Gb PC3200
2 x 160 Gb maxtor Diamandplus 9
Akasa 460 Watt.
Msi what the have you done with my motherboard?

How does that dual power rail thing work? can one device pull from both at the same time? (i.e. the cpu) if not the 14/15 amps from only one of the rails wouldnt be enough, if that is not the problem, it sounds like you got ahold of some dodgy memory. run memtest86+ from a boot floppy, if it clears 10 hours, well start looking for other culprits. it may very well be the motherboard, but the best way to get help is not to go on a forum dedicated to that manufacturer and start cussing at them.

Card Reader problem with MSI K8T Neo

Hi,
I have the K8T Neo motherboard, and every once and a while my Atech Flash 9 in 1 card reader (http://www.newegg.com/app/ViewProductDesc.asp?description=20-176-003&depa=0) doesn't power up, thus I can't use it.
What's odd is that all my other USB devices work flawlessly.
The only way I'm able to use the card reader again is to power down my computer and then flip the power switch on the psu, then turn it back on, or unplug the reader from the usb header on the motherboard and plug it back in.
I've noticed other people have had similar issues...
Any ideas what causes this, or any ideas on how to fix this?
Bio Haz

Yes, I had the same hanging problems as well with older BIOS versions then 1.7.
But that isn't the problem I'm talking about, the computer always starts up, it's just a matter if the usb reader will work or not.
Maybe MSI has yet to make a BIOS that is compatible with all card readers.
BioHaz
Quote
Originally posted by me_AMD
...yes, I had USB card reader problems but it caused the computer to hang during POST, and that was fixed with BIOS v1.7...
...I've had what you describe happen on another machine with a Mitsumi card reader/floppy drive combo...not sure what caused it...had to disconnect it and then plug it back in...???...

Problem with MSI z87-g45 and gigabyte GTX 770

Hello, I just built my new computer useing a Z87-G45 gaming motherboard and a Gigabyte GTX 770 graphic card, reason Im making this post is because I cant get a any video on the monitor useing the Graphic card, only way to get the monitor working is to use the Integraded graphic, I've tried all ports on the Graphic card same problem, i've switched monitor no succes.
Weird thing is, Inside BIOS when Im looking on the overview of the board it tells me that I dont have anything connected in the PCI-E slots, I've tried to switch PCI-E slots and same issue appears.
How do I fix this? or cant my graphic card be DOA? since my old one works in the PCI-E slots as normally

Update the bios to the most recent found here: >>BIOSes<<
Extract the bios file and place it on a fat 32 formatted usb stick and use M-flash w/ ME.
Then re-test.

Intel Pentium 4 @ 2GHZ with MSI 865P Neo motherboard

I recently bought a new case and motherboard to add all the parts in my old Dell to it. The BIOS and PC Alert 4 are reporting the processor running at a temperature between 114 and 135 degrees fahrenheit. Is this normal ir is the processor running at a good speed? My computer seems to be stable and running fine. Just need to know what the temperature is supposed to be. Also, there are 2 case fans running and the processor fan on the heatsink plus the power supply fan. Any comments are welcome, thanks.

Yes this is normal just a srewup
The temp from core center is all wrong
Check bios one
That is right one

BUG with Memory CAS-Latency with MSI i848P Neo-LS BIOS

I have a bug with MSI i848P Neo-LS BIOS. I try many MSI i848P with same trouble : the CAS Latency is always set to 2.0 even if the memory is CAS Latency 2.5.
It doesn't depend on PSU or others things (graphics card,...).
Try with Pentium 4C 2.6 or 2.8
But I have just one brand of memory (but many different sticks). Chips reference are VT56DD32M8PC-5 (256 or 512 Mb). This memory are reference as Cas Latency 2.5
If I set memory timings on SPD or manual : same result !!!
If I set memory speed on AUTO or 400 MHz : same result !!!
If I set other timings, then they are save correctly (ie : RAS# precharge set to 3 or 4).
I check timings with latest version of Memtest86+ V1.0 : http://www.memtest.org/
and of course, I get many errors.
The same memory tested on others mobo, give good results.
I try Windows XP installation and I get.... blue screens.
With some memory sticks : I have this message "memory timing too tighly",
if I press F1 to continue: then I get a memory cas latency of 2.5 with memtest86+ and then no error.
I try BIOS revision 1.0 (default) and 1.2: same result !!!
So, as I said before, I think this is a bug with the BIOS. I agree that a BIOS cannot detect correctly all kind of memory, but if you set memory timings manualy, then it must be set as you want ! ?
Any idea...
Thanks

H0 Alex,
You are correct.I have the same problem with my 875p neo lsr on bios 1.9. TH0S 0S B0OS BUG.but everyone says your psu is not enough or your rams isnt on the MSI Memory Compatability List.
why all of rams I try give same result?
MS0 boards works only with 10 or 20 ram.you don't say customer why you use this rams?
why in asus boards many os these rams working properly.This rams isnt on the MSI Memory Compatability List.but working.I try many no name rams and results are very good in all of the tests.
In my opinion MS0 bioses doesnt work good enough.
You don't drive a car.Car Drives you.

Problem with MSI 865P Neo and G4 Winfast

Similar Messages

Maybe you are looking for