Problem with MSI digi vox mini II and totalmedia

I have installed the driver and arcsofts totalmedia that came along.
I looks good and when I start the program the first thing I have to do is configure the tv settings. But when the regianl settings i  going to be set up it just says" the device is not available, or being used by another application. Please close any application that might be using the device and try again".
I havbe reinstalled it, closed down almost evrything, but dont get it to work.
Any suggestions?
Kind regards
Fredrik

Sorry.. here is some more information about my system .
Windows XP professional serivce pack 2 full patched.
Computer modell Dell Dimension 8400
Intel P4 processor 3,4 Ghz
Video Card: ATI Radeon X8000 XT
Soundcard Creative SB audigy 2 (WDM) 
Intel 82801FR SATA RAID Controller, two disk in a Raid 1. Segate and Maxtor disks.
Memory 1024MB PC-4200 DUAL CHANNEL DDR2 533MHZ
Kind regards
Fredrik

Similar Messages

  • MSI DIGI VOX MINI II v 3.0 PROBLEM no see

       Hi I have a problem with MSI Divi VOX MINI V3.0 total media did not even see the device in TV despite the manager is detected. Please help I have XP SP3.    install drivers from the cd and then the same thing.

    Nope, you'd need a dongle designed for the US/Canada market (supporting ATSC).
    As MSI is based in Taiwan, most of their digital tuners are DVB-T based, as it covers a larger global market. I know we don't normally recommend competitors brands here, but you'd have more joy with a US-based manufacturer for TV tuners suitable for the North American market, such as Hauppauge. However when it comes to DVB-T tuners, MSI's are second to none.

  • No Channels Scanned in USA? MSI DIGI VOX mini II

    Bought MSI DIGIVOX mini II in Germany. I believe it is the V.03 and has received DVB-T perfectly throughout the Continent but when I tried to use it back here at home I am not able to scan any channels. I think Sarasota, Florida has DVB-T broadcast so I am at a loss as to why the receiver is not seeing anything out there? Is this unit set to receive only European frequency ranges possibly? If anyone can answer this please accept my thanks in advance!
    MSI DIGI VOX mini II
    S/N S36-0400200-D430810022015
    Total Media 3.5.28.249
    Windows VISTA Business

    Nope, you'd need a dongle designed for the US/Canada market (supporting ATSC).
    As MSI is based in Taiwan, most of their digital tuners are DVB-T based, as it covers a larger global market. I know we don't normally recommend competitors brands here, but you'd have more joy with a US-based manufacturer for TV tuners suitable for the North American market, such as Hauppauge. However when it comes to DVB-T tuners, MSI's are second to none.

  • Problem with MSI P45 Platinum DDR2 mainboard and Corsair Dominator PC8500C5D Ram

    Hi, I have encountered with a problem.
    First I had
    MSI p45 platinum ddr2 bios ver. 1,4
    Intel E8400
    Corsair Dominator PC8500C5D 2x1Gb
    2 Asus ATI EAH 3870 Crossfire
    and it was running with windows XP without any problems.
    Problems began when I decided to upgrade to 6Gb of ram and to install Vista 64. Ram modules witch I bought are the same Corsair Dominator PC8500C5D, but 2x2GB.
    When i put them together adjust voltage 2.1v and timing 5-5-5-15 they fail mem test with huge amount of errors.
    when I test only 2x2gb modules memtest sometimes doesn't open at all, sometimes just stops working on 8 minutes of test. couple of times they completed memtest without any errors.
    Can someone advice what should I do and what could the problem?
    Thank you for your answers.

    Quote from: obsessed on 15-October-08, 18:20:44
    Corsair Dominator PC8500C5D 2x1Gb
    Problems began when I decided to upgrade to 6Gb of ram and to install Vista 64. Ram modules witch I bought are the same Corsair Dominator PC8500C5D, but 2x2GB.
    1) the modules are not the same (the DDR2 chips are different)
    2) as general rule, mixing 2x1GB with 2x2GB is a bad idea.
    cheers

  • Digi Vox mini-II with Media Portal?

    Has anyone got a MSI Digi Vox Mini-II USB DVB-T stick to be recognised by Media Portal (MP)?
    MP say that I should be able to add support myself for any DVB-T card with "BDA" drivers.  First question: are the drivers that come with the Digi Vox BDA drivers?  If not, is it possible to get hold of some?  And if they are, any ideas why MP still won't recognise the card?  If someone has got theirs working, I'll post more info regarding exactly what I've tried etc.
    I have read that some Digi Vox products (not explicitly my card) are rebranded Twinham cards, and some Twinham products ARE supported by MP.  Many people have had success by replacing their MSI drivers with Twinham.  I tried this but I admit I wasn't really sure what drivers were appropriate, so I can't rule this out as a solution.  If anyone knows anything about this, that would be great.
    Cheers,
    Matt.

    Cheers for the quick reply.  Unfortunately I have tried the most recent drivers you suggested.
    It's not really a problem with the card: it works fine with the supplied software and it claims to work (in the manual and on the box) with MCE -- I've no way of testing this; it's just that it doesn't work with Media Portal.  And I can't complain about this because it isn't in MP's list of supported cards.  The only reason I haven't given up is that MP say that you can get any BDA DVB-T card (or stick) working with Media Portal using GraphEdit and this is what I can't get to work.
    If anyone has had any experience with this then it would be great to hear from them.
    And yes, I have raised this issue with MP: I'm still awaiting a reply on their forums.
    Thanks in advance if anyone has any suggestions!
    Matt.

  • [Vox] Digi VOX mini won't integrate with MCE 2005?

    I just bouth a Digi VOX mini (usb 2.0 DVBT device) and althouth it works great with included Cyberlink PowerCiname, it doesn't seem to be recognised by the MCE integrated application. It's not compatible with that?
    I really need it to be, as I plan to consume DVBT from XBOX360, and it only could be done thrown propietary Windows MCE multimedia application.

    connect the DVB-T device, make sure the BDA drivers are installed (if any others came on the CD with it)
    then start MCE, go to Settings > TV > Set up TV signal

  • MSI Digi Vox Micro HD on Windows 7 64 bit Laptop

    I have a problem with my MSI Digi Vox Micro HD on Windows 7 64 bit. After inserting the cd with the drivers I get a pop up to autorun it. After I clicked Yes the installation didn't start. Instead I'v got an Invalid path error and the autorun froze. I'v had no other options then to install every single program separately for the tuner from the cd. First the Driver, than Arc soft, Media converter, total media running the *setup.exe files from the CD. I'v restarted the Laptop and wanted to configure the tv signal. I'v started the Total media 3.5 application and went to Setup->TV menu. There was this option: Select "Next" to begin configuring your TV signal (NEXT/Cancel). At any time I'v tried I get "The device cannot be detected or it is not supported." This device should be compatible with windows 7 (it is advertised so). How come these errors occur? What could be the main problem? How can I get my tuner work properly? Please help I'm very disappointed.

    Quote
    This device should be compatible with windows 7 (it is advertised so)
    Yes, but as you are using 64bit Win7, does the driver CD contain 64bit drivers?
    At present, there are no drivers listed for download on the product page:
    http://eu.msi.com/index.php?func=proddesc&maincat_no=132&prod_no=1878
    Maybe you could ask MSI Support about this: http://support.msi.com

  • MSI Digi Vox DVB-T

    I've newly tried out my Digi Vox. I'm delighted with the AV quality   however, I have to say I'm not at all impressed with the software.
    my 2.606 version player subtitle options doesn't work and the first time I run it I got a blue screen. (I've newly install my XP and updates 2 days ago after 2 yrs of flawless operation for - about time for a maintenace) The remote control is plain annoying, very slow response. EPG doesn't work most of the time. Crashes if you flip across channel too frequently and the Portable antenna, absolutely useless.
    I've tried to use Twinhan software which works well, functionality is exactly the same since they are the OEM. All features were fully functional and the remote control delay shorter. No EPG problem and no crashes.
    However, on most channel apart from BBC, the video jitters and skips which make it unwatcheable sometime. So I've to switch back to MSI version 2.606 to get back the smooth reliable AV transmission sacrificing the subtitle & a temperamental EPG options.
    The recording is superbly sharp. CPU usage very low.
    The latest BDA driver is v1.0.4.7 from MSI or Twinhan (search for VP-4075)
    I think only two 3rd party PVR software currently support this Digi Vox,
    (1) Meedio TV 1.38 and
    (2) myTheathre
    Can't afford them so will try out Winamp TV plugin next.
    If anyone knows of any freeware or trialware that support this little Digi Vox, Pls post it here. I seriously hope MSI development will workharder on the software side. This is a superb kit let down by the software.
    Cheers
    Notebook:  Dell Latitude D600 (with added Centrino too!), WinXP Pro
                    Dell Insiprion 5150 P4 M 3GHz w HT, WinXP Home, MSI Digi Vox
    Old desktop: P!!! 500MHz (o/c to 600MHz), Elite Mobo, Ubuntu 5.10 "The Breezy Badger"

    Quote from: Dr Stu on 22-December-05, 03:17:35
    have you ever looked at MediaPortal?
    http://mediaportal.sourceforge.net
    free, open source Media Center-type HTPC program, has support for DVB-T cards.
    Yes, have been trying to get mediaportal to work properly for the pass few days. It is very unstable and kept crashing with error message popping on and off at least on my machine. The audio lags significantly. I've tried all the tricks in their forum.EPG doesn't work. will take some time to sort this out.  hence I've not mention about it. Mediaportal is also memory intensive but a nice piece of art if it works.
    Could it be the driver problem? or windows?
    Whenever I load a driver (old & new) the Windows always say the device might not be working properly. Not sure why. Or have I got a dodgy Digi Vox?
    However, myTheatre works perfectly. the video did loss a bit of sharpness and lack features. but its by far the most stable and easy to use. Couldn't get EPG to work either need to gain access to their plugins.
    Cheers
    Notebook:  Dell Latitude D600 (with added Centrino too!), WinXP Pro
                    Dell Insiprion 5150 P4 M 3GHz w HT, WinXP Home, MSI Digi Vox
    Old desktop: P!!! 500MHz (o/c to 600MHz), Elite Mobo, Ubuntu 5.10 "The Breezy Badger"

  • Problems with msi p35 neo 2

    Default problems with msi p35 neo 2
        pc works fine when using windows and the net and emails
        only when using 3d mark or games do i ever get problems
        just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
        tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
        now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
        temps on the board (from msi dual core center temps cpu 33oc system 47oc)
        memory voltage 2.1
        any one know the settings for the ram
    more details you need
    System Details
    MotherboardEdit Value
        msi p35 neo2 fr
    Motherboard BIOSEdit Value
        latest
    CPUEdit Value
        core 2 quad 6600
    CPU Overclock SpeedEdit Value
        none
    CPU HeatsinkEdit Value
        standard intel that come with cpu
    CPU Idle TempEdit Value
        N/A
    CPU Load TempEdit Value
        N/A
    MemoryEdit Value
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
    Memory VoltageEdit Value
        N/A
    Video Card(s)Edit Value
        ati hd4870
    Video Card SpeedEdit Value
        N/A
    Sound CardEdit Value
        onboard
    PSUEdit Value
        g7 780 watt power extreme
    Hard Drive(s)Edit Value
        mator dimondmax 21
    Optical Drive(s)Edit Value
        N/A
    Other CoolingEdit Value
        3 80mm fans 1 frount 1 back 1 side
    ModsEdit Value
        N/A
    Operating SystemEdit Value
        windows 7

    Quote
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
       Quote
    memory voltage 2.1
    Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x).  Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800).  The voltage at these settings should not need to exceed 1.95V.  So please lower it accordingly.  In case the freezes still occure, please run memtest86+ to check your memory for errors.
    Quote
    msi dual core center
    Please get rid of that tool for all further tests.  Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

  • Hy, I have a problem with a new iPad Mini.

    Hy, I have a problem with a new iPad Mini.
    When I try to use the cameras, it doesn't work.
    I get to take 3-4 pictures and after that all I see is the shutter.
    It happends even if just start the camera app, or the facetime app, after 4-5s.
    I've reinstalled IOS 6.1 but nothing changed.
    It is a new ipad. What can I do?

    Ok, Orange Romania changed my iPad mini but now I have another problem.
    I bought the iPad mini on 01/feb/2013, took it to service on 06/feb/2013, and got another ipad mini on 12/feb/2013.
    But the new ipad mini keeps requesting the password for some user [email protected], and it does it from the first day of activation. This is suspect for me, so I checked it's serial with selfsolve.apple.com and it shows "Estimated Expiration Date: January 31, 2014" and since it has one year free service I am worried the iPad mini wasn't new.
    Please help.

  • Hi every body. I have some problem with my i pad mini's keyboard . After i opened the message icon , suddenly the shape of my keybord has been chenged . I don't know how to fix it? I was wondering if you'd mind helping me.thanks .

    Hi every body. I have some problem with my i pad mini's keyboard . After i opened the message icon , suddenly the shape of my keybord has been chenged . I don't know how to fix it? I was wondering if you'd mind helping me.thanks

    That's so you can text with your thumbs. If it does' tog back together  automatically  put your finger on the tiny typewriter  and you should get a pop up to reconnect keyboard. Or more easily put a finger on each one and pop them together.

  • USB problem with msi (nforce 1)k7d420

    USB problem with msi (nforce 1)k7d420
    i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
    it detects and install the device automaticly but when i want to access it,it just gives me error msg
    windows xp pro service pk1
    nforce nvidia drver v2

    http://www.nforcershq.com/forum/viewtopic.php?t=30003
    may be ive not loaded it yet

  • [Athlon64] Problem with MSI RS480M2-IL

    Hi all,
    I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
    MSI RS480M2-IL
    AMD 64 3000+ Venice E3
    Bios Version 3.8
    Geil PC3200 DDR400 2.5-3-3-6
    Maxtor 60GB HDD 7200RPM 2mb
    Verudium Power Vortex 420W
    Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

    the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
    so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
    in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
    so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
    based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely  hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
    perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem  to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
    one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops) 

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Maybe you are looking for