Problem with multiple counter plan containing running hrs and no of months

Hey gurus,
In my project the preventive maintenance of compressor is such that it is performed after 500 hrs or 6 months whichever comes first. Now i ve created a cycle set cosisting of 500 hrs and 6 months. In the multiple counter plan i ve assigned a counter to the plan for calculating 500 hrs and chosen the link as OR. I scheduled the plan and given the start date as 01.05.09. Now I am facing the following problem:
Suppose my counter value reaches the 500 mark on 01.08.09. Now a maintenance order is generated. My client now wants that the next order should be generated after the counter reading reaches 1000 or the date reaches 01.02.10, ie, the order should be generated for next 500hrs or NEXT 6 MONTHS from
the date of completion of first cycle, whichever comes first.
Pls help....
Regards,
Abhishek

Hi
If u have scheduled ur plan according to cycle set. It will take the Point of contact as 6 months.
OK
Ex : Cycle set : 500 hrs and 6 months, maintained OR functions
i have entered the measurement reading as 500.. thats why, it gives the call for todays date...
see the next date will be after 6 months... If u update the measuring point only, it will open a order... otherwise.. once u have scheduled it for 6 months.. once in 6 months it will give a order...
1     11.05.2009               0     New start Save to call
2     07.11.2009     07.11.2009          0     Scheduled Hold
3     06.05.2010     06.05.2010          0     Scheduled Hold
4     02.11.2010     02.11.2010          0     Scheduled Hold
5     01.05.2011     01.05.2011          0     Scheduled Hold
6     28.10.2011     28.10.2011          0     Scheduled Hold
7     25.04.2012     25.04.2012          0     Scheduled Hold
Schedule for a long period.. u will be able to understand the scenario...
- Pithan

Similar Messages

Bizarre networking problem with multiple 8.1 GA systems -- RT and Pro

Hi everyone,
I'm having a particularly bizarre problem with the networking on two Windows 8.1 machines, one running Pro and one running RT. Both demonstrate the same behavior.
In both cases, networking (wireless most of the time, although I'm not sure it matters) works fine for some period of time. Eventually it just stops working. Resetting the adapter, or flipping in and out of Airplane mode will bring it back again. The issues
happen on at least 3 wireless access points. In most cases, the networking actually appears to be up -- the limited access warning icon isn't up, although occasionally it does realize the networking isn't working.
Here's the bizarre part -- on both systems, local IP connectivity is fine. I can communicate perfectly well between devices on the same internal network, wired or wifi. During the time the networking isn't working on one or the other 8.1 system, other systems
on the network running Windows 8 (and other systems) work fine. There's no correlation between one 8.1 system stopping working and the other.
On *both* systems, when the networking appears to be failing, a traceroute actually gets 4-5 (or more) hops before going out to lunch. Other systems on the same internal network will cruise along to the same point on the route that is failing on the 8.1
machines and keep right on happily continuing the trace.
So that's the bizarre thing -- something on two 8.1 machines is doing *something* to the packets that is causing them to not route properly to a target system 10-15 hops away, the same routers handling the same kind of traffic from other systems behind my
firewall work fine, and whatever is happening to the packets that is causing issues resolves itself for some period of time if I reset the adapter. (The two systems are a MacBook Air and a Surface RT, so there's no drivers in common between them, either.)
I'm completely at a loss. Anyone see anything like this before, or have any thoughts on what to check?
(And, please, if you're one of those Microsoft support forum people who skim questions for keywords and cut-n-paste back a generic reply without any actual understanding of the problem -- like so many replies on here -- please do not waste my time. I am
trying to find someone who knows Windows 8.1 networking, not someone who knows just enough English to use ctrl-c/ctrl-v)

Hi George,
There is a known issue about Cisco device. It caused some windows 8 clients disconnected from wifi. I understand your windows 8 clients works fine, when the issue occurred on windows 8.1 clients. However, I think the KB article is worth a shot
http://support.microsoft.com/kb/2749073
Best regards,
Alex Du
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Problems with migration assistant between macbook running leopard and macbook pro on lion

Hi,
I've just got a macbook pro running lion and am having difficulties transferring through a network from a macbook (running latest version of leopard) onto it.
It just keeps telling me to update migration assistant on my macbook, which I've tried doing but it already says it's completely up to date.
I've tried checking that filesharing/firewall etc. is enabled on both.
Does this mean I have to get a firewire cable? What do I need to do?
Thank you for any suggestions.

Turn off your Leopard machine, leave your Lion machine on. Connect your firewire cable between both computers. Start up the Leopard computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the Leopard computer should become available to the Lion computer and will likely appear on desktop.

Getting run time error for multiple counter plan

Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
Srinika

Hi,
Please check reason for update termination in Transaction code SM13.

First time scheduling using IP30 for Multiple Counter plan

Hi,
I created a multiple counter plan with Cycle set as 6months/ 300 Operations.
I intend to start the job early and updated the Planned Counter date as 1st Sep 2014.I maintained Lead Float as 10 days.
When I run IP10, call is generated successfully. But when I execute IP30, no call is generated.
We have not activated enhanced functionality of Multiple Counter plans.
I checked all the parameters and everything seemd to be fine. In IP30, I checked the check boxes - Rescheduling & Immediate start of all.
In the field, Interval for Call Objects, I ran with blank value, 30 days value. But in both the cases, call is not generated.
I want to generate calls using IP30 only as there are lot of multiple counter plans. Can anybody suggest a solution to this issue?

Hello
As you intended to use cycle set functionality please activate enhanced functionality of Multiple Counter plans
Br
Rakesh

Problem with multiple Toplink/JPA apps in same server

Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server.

Problem with message count

hello ,
I have problem with message count, in my inbox there are more than 0 messages but i got result of
Folder inbox = store.getFolder("Inbox")
int c =inbox.getMessageCount()
of c is 0
i.e i got c as zero rather than 5.

I am seeing the same thing and I agree with MathiasF's observation. My count seems to increase when I do a search for mail on the server. This has happened previously (iOS 5.x) but ending the Mail app always fixed it. The only way I can correct the count now is if I turn off sync for Mail on the Exchange account and re-enable. This clears my mail and causes my phone to go out and redownload. Rebooting and resetting the iPhone has not helped.
I'm on Sprint - 32GB White iPhone 4S running iOS 6.0 (10A403)

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Problem with multiple forms and subview

I have a problem when using NetBean Web Pack (JDK6, Net Beans 5.5, JSF 1.2).
1) I created a JSF page (hello.jsp) and a page fragment (header.jspf) inside Web Pack, and let the JSF page (hello.jsp) includes the page fragment.
2) The include instruction is outside of the "form" element id=main_form() of the first JSF page.
3) Inside the page fragment (header.jspf), I put a form (id=header_form) with some input fields inside the "subview" element.
4) When running the web application, the form and its children (id=header_form) inside the subview are not rendered.
It seems to be a problem with multiple forms on a page and the subview.
Do I use these JSF components incorrectly? Any advice?
Thanks

The forms are not nested.
hello.jsp
<webuijsf:body ...>

<div style="margin: 0px 0px 10px 0px; left: 0px; top: 0px">
<jsp:directive.include file="Header.jspf"/>
</div>

<webuijsf:form ...>
From above fragment, you can see the header.jspf is outside of the form element.

LOV Problem with multiple values

HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...

duplicate of {thread:id=2286814}

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

I keep getting a message about a problem with the plug in container for firefox. what does it mean?

I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.

It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.

UC320W Problems with the dial plan

Problems with the dial plan ... There is a method to modify the External Dial Plan, we can not dial some numbers (800 XXX XXX, 115, 118, 187, etc., are special numbers in Italy), happens on FXO lines and SIP,in external.
Example: The operator enters "on any phone" 0 (for outside line) then 800 000 000,on the composition of the second 0, the phone responds "invalid number" and does not allow the call
We think it is a problem of Italy dial plan, you can change them?,
our system is configured as a region of Italy and Italy dial plan
is a known problem? you know to help me resolve it

Perfect, we wait for the update, this happens also for other special numbers (187, 191 customer service phone numbers and 118, 112, 115 emergency numbers). It happens with any line it is FXO, SIP, Shared. The problem is in the dial plan, the numbers are not included, the system does not accept them, and blocks the composition. Exists a method for change the file loaded into the configuration page "region" the system is set to Italy, I have seen that you can import the file from the computer, you can download the file "Italy", edit, and upload in the system '.
We are a telecommunications company, we install telephone systems, we would like to offer your product the 300 series our clients. We are testing in our lab your UC320W.

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Problem with multiple counter plan containing running hrs and no of months

Similar Messages

Maybe you are looking for