Problem with music playing

Hi, when I'm playing music on my Blackberry curve 8520 the music will stop playing when I receive a Message or email. Then an erros pops up and says Error ocurred attenting to play track. what should I do to fix this. Before this my music would play regarsless of receivng any type of message. Thanks.

Might sound a bit simple but - this happened to my ipod after i used skull kandi head phones, apparentyly the headphone jack was broken. Took it to apple store and they replaced the whole ipod. Not really anthing to do with syncing

Similar Messages

Lacie HD freezes MBP13 // Problem with music played on TBD

Hi all,
I have three questions related to my peripherals, below is my configuration:
I'm using a MBP Retina 13 inch, Mid 2014, 3 GHz i7, 16 GB RAM, OS 10.10.2
I'm using a Thunderbolt Display 27" as external display
1.) A couple of weeks ago I purchased a Lacie d2 Thunderbolt 2 hard disk. When I connect the hard disk through USB connection everything works perfectly fine. However when I connect it via the Thunderbolt connection my MBP freezes and I have to reboot my computer. Does anyone experience similar issues and if so, how did you resolve them?
2.) Also, since I installed 10.10.2. when I play music on MBP over my TBD after 30-45 minutes the music is overlaid with a signal noise. When I pause the track that's currently being played it goes away. Any suggestions are welcome.
3.) Can I power up my MBP with my TBD? (I have not found guidance how to do it online, I assume it is not possible but hey, you never know)
Thanks,
JS

Hi Smokerz,
Thanks for your reply. On number #3 that's how it do it now, however, I would have thought that there must be a way to start the MBP when connected to TBD through a keyboard combination or so. Apparently that is not an option and I have to take the MBP out of its stand. Not a big deal, just an inconvenience.
On #1: I'm surprised that TB should not be used like USB, I do it when I use the TB port to connect a projector and that works without any issues. I will certainly try your recommendation, but I'm under the believe that this should be plug and play.
Again thanks a lot for your reply.

Problems with music on iOS8?

Hi!
I'm currently using iOS8.0 on my iPhone 5 and have had problems with music deleting frequently and my phone freezing when I try to re-download it. for some reason it's only letting me have about 70 songs at any given point, but if I have more than that then the next time I open the music app I tend to find a lot of them have been deleted? This is incredibly irritating as I frequently use my phone for music, also whemever I'm downloading songs it tends to freeze my phone and I have to restart it.
I've tried updating to 8.2 but it's not letting me currently.
Any suggestions?

Oops, it says I'm on iPhone 4 iOS 6.1.1, but I'm on iPhone5 iOS 8

HT201210 can I return to previous iOS version. have ios7 but having problems with music files since upgrading

Is it safe to return to previous version of ios. I have updated to iso7 but now having problems with music greying outl on my ipad

Sorry, no Apple does not support downgrading

Problems with mirror play to Apple TV from macbook air

Hi,
I'm having difficulty's streaming from my macbook air to the tv screen via the apple tv.
The Apple TV is conected to the Internet via wifi and it plays rented movies or streaming youtube fine but if i try to watch a movie from my laptop (stream of the net ) and watch it on the tv then it wont work properly , it has excessive lag and cuts out or wont connect to my laptop at all . it wont show the desk top intermittent either and massive delays when it does.
i think it may have something to do with an update or something ? I have mavericks on the air and everything is updated , i have 2 apple tvs and 1 is connected through Ethernet and it seems ok I've also tried to do the same through my imac with parrot but its the same problems even tho its connected directly to the router.
Thanks in advance
stu

The Imac has the same problem with playing to the lounge room atv but no where near as bad, ( can actually watch a movie) it just cuts in and out a little but when you watch it on the imac screen its playing fine.
my modem is a netgear dual band and i have tryed both bands and still has the problem i also have a range extender and its bad through that but when I originally purchased the atv it worked fine with it.
I don't watch a lot of movies mainly stream music through the iphone on it and this is why im thinking that an update may have affected it cause it used to work fine but i also did purchase the netgear router and im thinking it may also could be a problem but what i cant understand is the problem is only with airplay or parrot depending on laptop or desk top and no real problems with the iphone streaming movies or the stream ok through itunes apart from some movies don't have sound in itunes .
When you say I can adjust the router could you tell me what to adjust or how ?
Thanks for your help

Consistant problem with music in menus

Hi For several projects in a row, I have had the same problem with adding music to my menus. The music plays thru for about 30 seconds, then, before repeating the cycle, the first few notes come in for a couple seconds. Why would these first few notes appear between cycles?
Any ideas? Thanks very much, Bob

Thanks for your thoughts, Shawn. This problem is really getting weird, though. Please bear with me: the 30-second aif file that I created for the Menu, was originally taken from a aif part of the movie sound track. I extracted the piece into a sound editing program I use called Peak. In Peak I created a discreet aif file which DOES NOT CONTAIN the notes that constitute the 'blip' which is turning up between cycles of the menu. The notes in the blip don't even exist in the aif file that was dragged onto the menu!! (They are, however, the notes that follow in the original file that the new aif was created from.) How and why would DVDSP find these notes and insist on playing them? This is like Twilight Zone.
Bob

Problems with music player after upgrade to V20 (N...

I upgraded my phone last week to the V20... And now when i go to transfer music through music manager it will not refresh the music library? Anyone help? When i press refresh it just freezes and i have to turn it off when turned back on i can then access the music player and play the music, but if i try to refresh it again it just freezes again and then i cant get into the music player at all, needs to be turned off again, is this something to do with the upgrade?
Is there anything that can be done to resolve this?
Thanks in advance
Message Edited by geof on 10-Jul-2008 05:35 PM

I had the same problem with v20 but if I waited for like 5 min. it finally refreshed itself. It was pretty annoying so I formatted the memory and hard-reseted the phone. Now it's OK. However I noticed that if you use the PC software to restore the phone's setting, chances are that you'll have problems. So I use it only to restore messages, calendar data and contacts-never to restore the settings so be sure to unmark this option.

IPhoto 4.0.3 Freeze with Music Playing

I'm unable to play music with an iPhoto 4.0.3 album without having the screen freeze. Without music all plays normally, but not with music.

Just confirming similar experience, after upgrading my parent's G3 iBook with Tiger (10.4, archive and install). They had experienced no problems prior to the upgrade. I could not upgrade them to iLife 2006 (because they are G3 limited). So iPhoto is from Tiger, and iPhoto is from prior installation.
Slideshow experiments I tried this past weekend:
0) Slideshow sans music : WORKS
1) Slideshow with included sample music : WORKS
--a) FYI, contained with iPhoto.app special directory
--b) however, copying mp3 from iTunes library location to iPhoto sample music directory (using cp within Terminal) : FAILS (something strange with iTunes mp3s?)
2) slideshow with music within iTunes Library yields spinning beach ball : FAILS
--a) No music has originated from iTMS (therefore copy protection is not an issue)
--b) Newly imported mp3 from CD with iTunes 6.03: FAILS as above, so its not "old or corrupted" mp3
--c) copying "working" mp3 from sample music location (within iPhoto.app) to iTunes music library : FAILS, so possible problems accessing iTunes library/mp3?
Oddly enough, previewing music from the iTunes library within iPhoto works, so it seems like only the slideshow mechanism of playing music from iTunes library is broken.
Parents have left, so that is all I can add to this subject for the time being...
I'm sure they would be interested in the fix, if someone finds one,
John

Problem with music player - can't view tracks!

I've had my 5800 since 03/09 with no problems with the music player until now and I have around 7GB of music on the memory card and a few tracks on the phone memory itself. I can't play this music through the music player anymore though.
When I select 'All songs' it only comes up with 8 tracks, some of which are on the phone memory, some on the memory card. This just happened overnight about 4 weeks ago, before it was working fine.
If I look at the memory card on the PC all the tracks are visible. If I access the music throught the 'File Manager' on my phone all the tracks are also visible and will play when selected. Can anybody help me? I only bought the phone for it's music playing capabilities and it's really frustrating!! Thanks in advance.

Try to use some alternative Music Player applications such us Moove or others, and try to delete some unused tracks...May be the problem is that you have too much audio files on your 5800.

Problem with Music for an Car Audio System

Hello,
first I want to apologize for my bad english, because i come from Germany
I have a Problem with my MacBook Pro 2011 and the file transfer (music) on a USB stick.
Whenever I copy music on a USB, everything is copied twice and the second File is copied with an "." previously.
My car detects the files as broken.
Can anybody help me pls???

First try creating a folder or folders to put the music in. Drag the folder to the USB.
See if this helps.
The "." means a hidden file. Does you no good.

Problems with instant play in some browsers

This is not a problem with how Safari works, but I thought someone here might help me with a frustrating problem for which I can find no solution.
I created several web pages with embedded QuickTime movies in mp4 format. They are constructed so that the movies begin instantly to play as soon as the pages are accessed. This has worked for the past couple of years regardless of which browser was used ( Mac versions of Safari, Firefox versions <4.x, Sunrise and others; Windows versions of Internet Explorer and Firefox).
It has recently been brought to my attention that this functionality is broken when updating to Firefox 4.x for Mac or when using Chrome for Mac. Using either of these browsers to access the pages results in a static page with no video play. The user must wait 1-2 minutes for the video to completely download and then it will automatically play. Since the movies play fine on multiple browsers, including the new Firefox 4.x for Windows, it seems to me that the problem is not in how the movies were coded but rather in how the browsers handle the html code for the pages.
The movies were edited in FCP, exported to Compressor, processed as mp4 streaming video and then embedded in web pages using Freeway Pro software with the "auto play" option enabled.
Any ideas will be appreciated.
John
a sample page is: http://lccut.org/videofiles/gospelvideo6high.html

Here's the response I got from Freeway Pro support:
Hi John
There seems to be an issue at the moment with the way that Firefox 4 (and to a certain extent Chrome) handles QuickTime movies. If you go to the test page on our site at <http://users.softpress.com/keith/firefox4test/> you'll see that it is very erratic in what it shows and how it plays - but note that you may need to wait a while in between clicking on Firefox 4's Refresh button to see that the results change from one refresh to the next.
Freeway is certainly publishing the code correctly, so this is does not appear to be a Freeway issue - though we would like to get to the source of the problem so we can advise customers on the best options to fix things. If you Google for "firefox4 quicktime movie problem" (without the quotes) you will see that this is not a problem specific to Freeway users.
Leopard users report that Firefox 4 displays and plays QT movies fine, but Snow Leopard seems to have problems. This may be due to the way that QuickTime and Firefox 4 play together, as Leopard and Snow Leopard use slightly different versions of QuickTime.
You should, however, be aware that non-Mac users will always need to download the QuickTime plug-in (which many PC users are reluctant to do, and some may not be allowed to by their IT department) for them to be able to see the movies play. The only truly universal method for offering video content on a web page is to use Flash .flv files and then use the FLV Player Action so that iPhone/iPad users will see an alternative (non-Flash) movie which is created by the Action. See the movie tutorial at <http://www.softpress.com/support/tutorials> (Episode 14) for details of how to set this up.
As soon as we find a workaround for the problems with Firefox 4 and Chrome, we will put up an article on our KnowledgeBase at <http://www.softpress.com/kb/>. It might be that Firefox and Chrome will release a new update soon to fix the problem, in which case we will tell you which version you need to download an install.
Best regards
So the FW people insist that there software is encoded the pages properly and it is the fault of the newer Mac browsers causing the error.
John

IOS 5 Problem with Music

Something wrong with "music" stuff after upgrading to iOS5. Itunes says about successful synchronization of playlists, but when it comes to listening the music it makes me mad. On the screen there is a "play" sign but no music, even when I'm trying to switch the music. Please help me!!!

Few things you can do: Connect your iphone, and on the summary page, go to music tab, uncheck all songs. Sync, reboot, recheck songs that you want in. It should work.
If not, then Restore and set up as a new phone. I had this issue to, and the uncheck all songs did not fix it for me. So I restored my phone and set up as new and music works perfect.

Album art not in sync with music played on my iPhone

I have re-synced, deleted my playlist and rebuilt them, still haven't found a solution.
On my computer in iTune, all is good, you play Mika, you'll see Mika as the album art.
On my iPhone, I hear Mika, I read Mika but I see the album art of Kate Voegele.
How can I get it back in sync?
Thank you

I did not have this problem with my ipod touch
I upgraded iTunes to 8.2.1
My iTunes PC artwork is beyond reproach.
I synced my ipod touch.
Only those songs synced since 8.2.1 have incorrect artwork.
All those songs synced before 8.2.1 have correct artwork.
It is not songs added to iTunes since 8.2.1 but a song in my library which was synced to my ipod SINCE 8.2.1
The same problem exists on my iPod Classic 160.
Therefore this is not a firmware or an iPod issue.
Seems we have the smoking gun. Apple? New fix of iTunes please? This is one of the most annoying bug introductions yet.

6125 - problem with music file names

Hi everyone,
I bought a Nokia 6125 last week and have a slight problem with the music player if anyone can help please:
The music files that I have transferred to my phone have the correct song and artist name on the memory card in the Gallery, but when I open up Music Player it just displays them as squares. Any ideas on how to solve this please?
Thanks,
Sammy_JJ

Hi,
the problem might occur, because of language versions are different(source and your phone). Or the filename coding is not supported in the phone.

Missing ID Tags & Other Problems with Music Transfers

Hello,
I have been having some inconsistent problems with adding songs to my main iTunes Music Folder. Occasionally, songs will transfer without some of the ID tag information, despite the transfer (or consolidate) method used. Let me explain...
My main 30000 song and 170 GB iTunes database is located on my PowerMac G5 1.8 GHz DP at home. I usually rip small portions of my CDs on the road via my PowerBook G4 1.5 GHz (assuring that all of the tag information is correct). Once home, I transfer the iTunes Music Folder (usually only 1 GB big) from my PowerBook to the Desktop of my G5. From there, I drag the folder onto my iTunes window and allow it to duplicate directly into my large iTunes Music Folder. Once done, I delete the temporary iTunes Music Folder from both the PowerBook and the G5. I also delete the iTunes Library and iTunes Music Library.xml files from my PowerBook before starting up the process with another batch of CDs. This is how I have built most of this database and only recently begun to have problems. The problem songs always retain the song name and, since I have always used the default ID tag setting, most songs show version 2.2 to 2.4.
In my troubleshooting, I tried to make completely new iTunes Library and iTunes Music Library.xml files by using this same method with my entire main iTunes Music Folder (yes, it took a long time to finish and I had a clone for backup). Suprisingly, almost 10% of those songs suffered from the same problem! Reattempts with smaller transfers showed no change. In this process, I also noted that some song files transferred, but showed NO signs in the new iTunes Library!
As I am a big fan of the iTunes AppleScripts by Doug Adams, I have ways to discover and correct these problems. However, I still would like to find out what is causing it. Does any of this sound familiar to anyone? Would converting every song to the ID tag version 2.4 make any difference? Obviously, this is my most prized database of information and I want to protect it, as well as administer any preventitive maintenance that it needs for good health.
If we learn from our mistakes, then I obtained my PhD years ago,
Dr. Z.

It shouldn't matter what size your library is - if the information is in your files then it should get imported.
1. Are you sure your problematic mp3 files are in fact valid mp3 files? If you open Terminal.app, and type this (substituting your mp3):
hexdump -C -n 30 ~/Desktop/Sample.mp3
You should see some hex & ASCII come back - for example:
00000000 49 44 33 03 00 00 00 03 13 68 54 59 45 52 00 00 |ID3......hTYER..|
00000010 00 15 00 00 01 fe ff ff ff 00 7f 00 7f 00 |..............|
All id3v2 mp3's begin with "ID3" and the 4th byte represents the id3v2 tag version (2,2, 2.2.1, 2.3, 2.4); mp3's with an id3v1 headers are a little odd, but they generally begin with "FF FB" or "FF FA". I've seen moov files masquerading... all kinds of things. These won't hold tag data, and so would exhibit the behavior you describe. I myself got duped into making these abominations by using QuickTime to select a chunk of an mp3 and renaming to "file.mp3" - when it was a full blown quicktime movie that it really exported as.
2. Are you sure the information exists within your file at all? All tags get written back into the file (except I think rating and certainly playcount). You can use any number of utilities to get at the data, some easy (python/perl utilities) or that require compiling (id3lib, taglib). You can get use the above method (with a longer number than 30) or a hex editor and look for the values manually as well.
Using for example PyID3 (http://icepick.info/projects_old/pyid3/), download & extract; open a Terminal.app window and type:
export PYTHONPATH=/Some/path/to/YOUR/PyID3_folder
(or you can just type up the the = and drag-n-drop the folder onto the window & hit return. Then type:
python -c 'import id3'
Then in the examples folder, drag-n-drop the "listid3v2.py" script onto that same terminal window/session, and then an mp3 file (and hit return). If whatever information is missing from there, it isn't in your file. Note: PyID3 might have some issues with a v2.4 tag (specifically year is carried on the TDRC tag, and TYER is obsoleted). You can get an v2.4-enabled id3lib binary here:
http://members.verizon.net/pucklock/id3Infiltr8/IDInfiltr8.htm
Find "id3info" in the support folder, and drag-n-drop that binary onto a Terminal.app window, followed by your mp3 file. It should spit back all your info (except Grouping). The application itself should do much the same, just not the full breadth of tags available - just use it on copies.
3. Converting to a different tag version wouldn't impact most tags (year being 1 major exception) - the other conversions (latin1, unicode, blahblah) woudn't change anything if you use mainly ASCII text. It could if you're big into Ukranian Progressive Polka - and used Cyrillic to tag everything.

Problem with music playing

Similar Messages

Maybe you are looking for