Problem with my clock

I've updated my 3GS yesterday to 4.2.1 and have now problems with the clock. My iPhone is still in the German summer time. Synchronising again this morning didn't solve the problem.
Well done Apple, this caused a morning in unnecessary rush this morning. I was hoping Apple learned from the big issues in Australia with the alarm clock after the last update.
Cheers

Right now this is the Slipknot - Scream, does this not enought ?

Similar Messages

Problem with the clock widget

Hi,
I would like to know if someone have a problem with the clock widget after doing the update system to Mac OS X Mavericks (v.10.9), cause the appearance of my clock was like this (attached image). Pay attention for the position of hands of the clock (watch hands): Don't have something strange?
Anyone know how to fix this problem?
Thanks in advance.

Hi, I have the same problem, I have done a fresh install of OS X and still did not fix the clock ... For when a new update?
Thanks

Nano problems with Alarm clocks(lik e Luna or others)

I have a new nano 4gb, and an Xtrememac Luna... My old ipod 2nd gen worked perfecly, the new nano has problems instead.. When my alarm function lit the ipod, it does not play the song, but remain in pause... The nano wakes up, but old nano started to play the song, this stands in pause. Why this? Can I hope in a fix or something? many people have this problem...
Possible solutions?
thanks in advance

Since there was no reply from Apple so far I called their service today.
The claimed that this problem was not known with the devices which they are selling and that they can't tell about 3rd party alarm clocks.
Big news! Who would have thought of that answer?
Well I then called the manufacturer of my alarm clock which is called "auvisio", one of these cheap copies. They knew about the problem with the nano 3G on thier device and said that they can't offer a solution so far. They offered RMA which I would say is quite nice of them but it doesn't help me much with my wake-up-problem in the morning.
I already settled with the thought that I would have to buy the more expensive Apple stuff but as I read above even Bose seems to have the problem. Complete confusion.
Hopefully firmware 1.0.3 will be released soon and can finally solve these problems. Release 1.0.2 definitely was a step into the opposite direction...

Hold time problems with Dual Clock FIFO

Undoubtedly the main use-case for Dual Clock FIFOs is the transport of data across clock domains.
In this simple example, a serial datastream is deserialized and written to a dual clock FIFO, which in turn is read in a different (slightly faster) clock domain by a simple loopback unit, which takes the data and sends it back through another dual clock FIFO, where it is read and serialized out again.
The clock rates used are relatively slow (10Mhz and 12MHz) compared to the FPGA capabilities (both fabric and FIFO), so I would expect this to be straight forward and without any issues. Nevertheless, Vivado constantly creates a number of hold time violations on the input of the output FIFO (usually a few hundred picoseconds) where the routing delay seems to be in the range of 5ns, which I consider odd, given that both clocks have a period which is a magnitude higher.
The loopback should be synchronous with one clock cycle delay, so I wouldn't expect any problems from there.
As usual, I'm probably missing the obvious here and I'm looking forward to a great explanation what I did wrong :)
Thanks in advance,
Herbert

Here is the Timing Report.
The issue might be caused by the Quick directive given for place and route.
place_design -directive Quick
route_design -directive Quick
At least the hold time violations in this example go away when I remove the directive.
Thanks for looking into it, appreciated!
Best,
Herbert

3rd Gen Nano-Problems with iPod Clock Radio.

Hey All,
I'm having problems w/new Nano and an Alarm Clock Radio for iPods.
1) When the alarm time is reached, the iPod display lights up like its been triggered, by the alarm clock base, but music doesn't play. The unit then reverts to the beeper.
2) The unit is made by SDI Technologies, the same people that make the iHome models of Alarm Clock radioes. They've told me that Apple needs to come out w/an update/fix.
3) Does that sound right to all of you?
Has anyone heard about a time frame for a revision past 1.0.1?
Thanks, Tom

Thanks GunnerJr,
I had an appt. at my local Apple store yesterday. The guy was helpful but felt that it indeed was a firmware issue that was occurring. He couldn't say when the next update would be rolled out but said they're pretty frequent based on prior Apple products.
Apparently the redesign of the Nano is from the ground up and very thorough. The firmware in the clock radio is probably kind of dated back to some time in '06. Hopefully the software/QA people will get wind of this issue and arite it into a future update. Certainly not the biggest issue they'll deal with but hopefully sooner rather than later.
Tom

Has anyone had problems with the clock app in iOS 6?

The clock app has been updated and now allows me to use a song as my alarm tone. Have been wanting apple to do this for a long time. Problem is that when alarm goes off I get no sound. The phone just vibrates. I do not have the phone muted. Guessing this is a glitch in the app? Anyone else having similar problem?

Been using iOS 6 now for a couple weeks on an iPad 2 and twice have relied on it as an alarm clock. Both times it's failed to play the song I've designated as the alarm. I've tried it with the cover open and closed, volume maxed and not. Each time, after the designated alarm time, I've opened the iPad up & entered the security code only to be greeted by the alarm message pop up. That's it.
Kinda frustrating, to say the least.
Am I using it incorrectly? Having used the clock on the iPhone this way in earlier versions of iOS, I've never had an issue. Would like to leverage this functionality, but being 0 for 2, not sure I want to risk a third time...
Thoughts?

Intel Graphics HD4600, Windows 8.1 x64, Driver: 3379 - problem with GPU clock

My notebook is Lenovo B5400.
In my notebook I have Core i3 4000m with HD4600.
When i run gpu benchmark gpu clock goes to 1100MHz (it's fine), but if my system is in IDLE, gpu clock is 600MHz (it should be 400MHz).
I tested it with driers 3345 too and problem was the same.
How to fix this?
Log from GPU-Z, i was waiting to my system hibernation (screen is off after 5 minutes): http://wklej.to/Tol36
After I bought the notebook I run Bios Update Utility, may its the problem, but on Lenovo site there is only one version of BIOS (1.02-1.04) - I have this version now!!
How to repair this??
I have balanced power plan turned on, but tried witth power saving too!

halo?
now have Windows 7 x64 with latest Intel gpu drivers from lenovo drivers site and situation is identical.
(I see thinkpad power manager says that gpu is on 150% (400*1,5=600), so it isnt gpu-z problem)

Problems with a clock element

Good Morning,
I just need your advice. I am trying to code a clock element with the java2d. What i thought about is just a string that is repainted each second or minute, depending on the format of the time.
Of course, I don't want to block the main thread with this task, so i tryed to put it into its own one, that can run in the background, calculating the time and write it out.
And this is where my problems start. The element lies in a JPanel and will be called and started by the paintComponent() - function of the JPanel. The call will start the clock thread, and within this thread, i will clear and repaint the timestring.
The thread is started proparly, the functions are called and everything - but nothing appears on the screen.
I think the problem is more the call of the function than the function itself - do I have to go through the JPanel each time I want to repaint the string? Thats what I want to avoid.
This is the run()-function of the clock-element. the Graphics2D will be stored within the class with the first call by the JPanel.
     public void run() {
          mRunning = true;
          while(mRunning) {
               mText = DateFormat.getTimeInstance(mType, Locale.GERMAN).format(new Date());
               if(mTransform) {
                                     //Just to draw the string
                    this.transformTimeElement();
               }else {
                                     //Just to draw the string
                    this.drawTimeElement();
               try {
                    Thread.sleep(mSleep);
               } catch (InterruptedException e) {
                    //empty by purpose
     }

import java.awt.*;
import java.text.DateFormat;
import java.util.*;
import javax.swing.*;
public class TimeSetup extends JPanel implements Runnable {
    Thread thread = null;
    String mText;
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        g.drawString(mText, 25, 25);
    public Dimension getPreferredSize() {
        return new Dimension(240, 50);
    public void run() {
        boolean mRunning = true;
        long mSleep = 500;
        int mType = DateFormat.MEDIUM;
        while(mRunning) {
            mText = DateFormat.getTimeInstance(mType, Locale.GERMAN).format(new Date());
            repaint();
            try {
                Thread.sleep(mSleep);
            } catch (InterruptedException e) {
                //empty by purpose
    private void start() {
        thread = new Thread(this);
        thread.setPriority(Thread.NORM_PRIORITY);
        thread.start();
    public static void main(String[] args) {
        TimeSetup test = new TimeSetup();
        test.start();
        JOptionPane.showMessageDialog(null, test, "", -1);
}

Ti4200: problem with MSI CLOCK and info page

Help!
I've just install ti4200 128mb. Everything runs fine, 3d mark even showing 9300+
However, everytime I try to go to the MSI clock and information tab under display properties, I get a Microsoft reporting Error!
I've tried this at W2k and also failed!
I'm running up-to-date MSI v3000 nivida drivers.
P4 2.5ghz
ASUS P4S533
512mb ddr333 ram
WD 800jb
I think its the motherboard, any ideas?!
Thanks in advance.

What's all talk about install other drivers ?.
This is old problem if you would check some old threats.
Problem lies in ASUS mobo, nothing can fix this, yet.
If you have ASUS mobo, use 40.41 Nvidia drivers with Coolbit to overclock you want be sorry.
There is nothing in this flips that you miss.
MSI support knows about this problem you can try to send them note, but they will not response.
MSI support is one of the worst I have ever tried.
Like you everthing else runs great. I would be more unhappy about there is no hardware monitoring for G4ti, I thougt first it was in this flips but they only support it for G4 MX cards. Don't know whey but I'm very angry and I will never get another MSI card.
Regards
Finnbogi
G4ti 4400 VTD
ASUS P4S533
P4 1.8 @ 2.2

Problems with 'Alarm Clock'

Good day.
I use my Ipod as Alarm Clock - it's pretty good to wake up while listening to the favourite music. I made it to start playing playlist without beeping.
I don't know why, but sometimes (after watching video, listening to the music before I go to bed) my alarm clock doesn't work correctly: when it's time to wake up, it just shows a message *wake up* as usually, but without playing music, so I'm being late for some times already...
Please, tell me what to do, how to fix this problem, 'cause I hate ordinary beeping alarm clocks.
P.S.: Sorry, if my english isn't very good.

Pick a sound, song, etc. for the alarm and make sure it is not the default one.

Problem with LogicCore clocking wizard

Hi,
i got this error during the translate of my design but i can't understand the reason of it:
ERROR:NgdBuild:455 - logical net 'CLK_OUT2_SIGNAL' has multiple driver(s):
ERROR:NgdBuild:455 - logical net 'CLK_OUT3_SIGNAL' has multiple driver(s):
I'm using ISE 14.7 and the IP clocking wizard 3.6, which menages 3 clock signals: two of them are the clock for other IP cores (selectIO interface wizard) and the third drives the clock for a counter and a ROM.
here is the code of the top level entity:
entity strutturale_SERDES is
port(
clk,
reset,
control : in std_logic;
output : out std_logic_vector (7 downto 0)
end strutturale_SERDES;
architecture Behavioral of strutturale_SERDES is
signal output_ser : std_logic_vector (0 downto 0);
signal CLK_DIV_OUT_deser_signal : std_logic;
signal CLK_OUT2_SIGNAL : std_logic;
signal CLK_OUT3_SIGNAL : std_logic;
signal CLK_OUT1_SIGNAL : std_logic;
signal CLKFB_IN_SIGNAL : std_logic;
component DESER is
generic
(-- width of the data for the system
sys_w       : integer := 1;
-- width of the data for the device
dev_w       : integer := 8);
port
DATA_IN_FROM_PINS       : in    std_logic_vector(sys_w-1 downto 0);
DATA_IN_TO_DEVICE       : out   std_logic_vector(dev_w-1 downto 0);
CLK_IN                  : in    std_logic;                    -- Single ended Fast clock from IOB
CLK_DIV_OUT             : out   std_logic;                    -- Slow clock output
IO_RESET                : in    std_logic);                   -- Reset signal for IO circuit
end component;
component strutturale_SER
is port (
clk_ser,
clk_signal_gen,
reset,
control : in std_logic;
output : out std_logic_vector (0 downto 0)
end component;
--ipCore Clocking Wizard
component Multiplatore_CLK is
port
(-- Clock in ports
CLK_IN1           : in     std_logic;
CLKFB_IN          : in     std_logic;
-- Clock out ports
CLK_OUT1          : out    std_logic;
CLK_OUT2          : out    std_logic;
CLK_OUT3          : out    std_logic;
CLKFB_OUT         : out    std_logic;
-- Status and control signals
RESET             : in     std_logic
end component;
begin
U1: DESER port map (
DATA_IN_FROM_PINS => output_ser,
DATA_IN_TO_DEVICE => output,
CLK_IN => CLK_OUT3_SIGNAL , --clk for one IP core (selectIO interface wizard)
CLK_DIV_OUT => CLK_DIV_OUT_deser_signal,
IO_RESET => reset
U2: strutturale_SER port map (
clk_ser => CLK_OUT2_SIGNAL, --clk for one IP core (selectIO interface wizard)
clk_signal_gen => CLK_OUT1_SIGNAL , --clk for the counter and the ROM
reset => reset,
control => control,
output => output_ser
--ipCore Clocking Wizard
U3: Multiplatore_CLK port map (
CLK_IN1 => clk,
-- Clock out ports
CLK_OUT1=>CLK_OUT1_SIGNAL,
CLK_OUT2=>CLK_OUT2_SIGNAL,
CLK_OUT3=>CLK_OUT3_SIGNAL,
CLKFB_IN=>CLKFB_IN_SIGNAL,
CLKFB_OUT => CLKFB_IN_SIGNAL,
RESET=>reset
end Behavioral;
I thank you in advance for your sopport.

No i didn't try an example design.
I resolved the problem using the buffers of the kind BUFPLL.
Thank you

Mac with boot camp. i got problem with the clock .. help please ..

hi. im using macbook pro. my mac hav been install with boot camp. so now i run two operating system. mac n windows 7 (64 bits) but i can set my clock time correctly for both my OS.. how can i solved this .? i hav doing google search about this... but i found nothing.. can sumone help me

Your OSX psrtition and your Boot Camp partition are completely separate. You can reinstall Mavericks without affecting Boot Camp and you can redo Boot Camp without affacting OSX.

Problems with world clock

Because i didn't found how to contact apple, i posted my question here.
if i select the world clock in my ipod, and i select a location in america, he alway says that the location is in the netherlands, for example: new york, netherlands. does anyone knows if there's a software update for this, its not that important, but i like it more if everything is right...
thanks for answers

Make sure you region settings are set correctly first then try again.

Problem With Alarm Clock and Ringtones

Two nights ago i set my alarm for 5:00am on my Blackberry Storm2. The next morning the alarm did not go off. When i checked the phone i tested the ringtone associated with the alarm and it came back with an error message that said the phone could not find the ring tone. I then noticed that all ring tones did not work, my phone did not ring when called, the phone also did not make any alert sounds. I tried several different ring tones and I received all the same messages.
I did a battery pull on my phone and that seemed to fix all the issues so I did not thing anything of it. I tried it again this morning and the same thing. I did not do the battery pull this morning as I was going to leave the errors on the phone to bring back to Verizon. I even tried calling the phone this morning and it would not ring or sound any alerts. All of a suddent about 3 hours later my phone starting ringing from a phone call and alll the ring tones started working
I have not added any ring tones to my phone all of these ring tones are the factory installed ones. Both nights I have the phone on my dresser face down and not attached to any charging wires. I did add music to my media card 2 days ago using the ITunes Snyc but have not created any ring tones at all.
Would anyone know what is causing this issue?
Would anyone have any idea what would be causing this.

in my opinion this is a media cache issue.
activate Mass Storage mode and connect your device to your PC.
using the Explorer of the PC, view the Storm's two harddrives and especially the hidden files. You should see a file named BBThumbs.dat in every folder that contains a media file. Delete all those BBThumbs.dat files.
those files are media cache, and they may sometimes get corrupt. Deleting them will force the Media Manager to recreate the cache entirely.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Anyone else have a problem with their clock disappearing from their menu bar every day at 10:00 am?

The date is still displayed, and there is a blank spot where the time should be. Unchecking/checking the "show date/time" box in date/time preferences fixes it, but I have to take this action every day. It's more annoying than anything else, and am looking to see if there is a fix.
This is new since I updated to Mavericks.

reset SMC and re-verify
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Problem with my clock

Similar Messages

Maybe you are looking for