Problem with my extraction

1) Already one LO extraction say it for SD is up and running live with all the process chain and so.. If i get a requirement to add few more field to tis ... how will you do it with minimal impact on prod data which is already live
2)  Alreday VAHDR is up and running live... how to active VAITM with minimal effect without impacting VAHDR..
My idea for this was create a replica of the same with additional field make already existing process chain inactive and make new one active and schedule it
If any better suggestion to approach this problem please let me know it. I am waiting for your response. Thanks in advance

Hi Siva,
The normal way is we need to fill the setup table again after the enhancement of fields and then need to run the datasource to get the data in bw.
But there are other cases like you can do the enhancement and also you can create an custom extractor based on the Table/FM for the additional field added. Then you can map that custom ds also to the bw flow and map only the newly added fields. And this can b run once without a downtime so that all the values of the newly added field is update into bw.
Assumption is that you need to have DSO layer with overwrite mode. If its different then we might need to do selective deletion etc.
Let me know if you need more info.
Regards,
Chathia.

Similar Messages

  • Problem with PDF extract in a report

    Hi guys,
    We are facing a peculiar problem with PDF extract in a report. When we run a report and export PDF , all the records in the result set are populated in the PDF. however, if I navigate away from the report and return back to the same report, and click on export pdf (with the result set already populated) i get a blank PDF document without any records. If i run the report again and then export the PDF it works fine.
    Export excel works fine for all cases.
    I am assuming it has got something to do with the way the system handles the cache for PDF export.
    I also found that this occurs only when we have a value list filter with "none" set as default,and in this case, initially on opening  the report for the first time the query does not get executed automatically.
    Any help on this would be highly appreciated.
    Thanks and Regards,
    immanuel

    Hi Immanuel,
    Have you tried clearing the cache? My guess is, it is probably a defect.
    Regards,
    Vikram

  • Problems with Delta Extraction for 0CRM_OPPT_H (no data found)

    Hi,
    I've some problems with the Delta Extraction of the Infosource 0crm_oppt_h (CRM Opportunities Header). After initialization I get no delta data from the CRM system.
    What I already did:
    Activated 0crm_oppt_h Data Source (checked functionality with rsa3)
    Started Info Package (Init) on BW side (worked fine)
    Checked the status of the Data Source on the CRM system using BWA7 ("initial upload" is unmarked; "delta active" is marked and what makes me worry is that the column "Queue exists" in <i>unmarked</i>...)
    If I change anything (like Phase, Expected Sales Vol.) in the opportunity, the Delta Extraction get no changes.
    Could You help me out, please?
    Best regards,
    Markus Svec

    hi Markus,
    try to check oss note 788172
    Release Status Released for Customer
    Released on 23.03.2005
    Priority Correction with high priority
    Category Program error
    Symptom
    No data exists in delta extraction from the CRM server to the BW system for business transactions, if parallel processing is applied as per note 639072. But Data is extracted if parallel processing is switched off.ie. when BWA_NUMBER_OFF_PROCESSES is set to 1,there is data during delta. This applies to the following DataSources:
    0BBP_TD_CONTR_1
    0CRM_COMPLAINTS_I
    0CRM_LEAD_ATTR
    0CRM_LEAD_H
    0CRM_LEAD_I
    0CRM_OPPT_ATTR
    0CRM_OPPT_H
    0CRM_OPP T_I
    0CRM_QUOTATION_I
    0CRM_QUOTA_ORDER_I
    0CRM_SALES_ACT_1
    0CRM_SALES_CONTR_I
    0CRM_SALES_ORDER_I
    0CRM_SRV_CODES
    0 CRM_SRV_CONFIRM_H
    0CRM_SRV_CONFIRM_I
    0CRM_SRV_CONTRACT_H
    0CRM_SRV_PROCESS_H
    0CRM_SRV_PROCESS_I
    Other terms
    DataSources, BWA, initial extraction, delta init, parallel processing, no data in delta.
    Reason and Prerequisites
    There is an update on the generated delta table which causes data corruption in running delta initializations as the changed delta sets will be deleted with every further update on documents. An open cursor statement is there without fetch data in SMOX3_GET_DATA.
    Solution
    The problem is solved with the attached corrections.After applying the corrections a new initialization of the affected datasources is necessary.

  • Problem with RSCRM_BAPI (extraction to Fixed Lenght txt file)

    Hi Experts,
    I have a question about a RSCRM_BAPI limitation:
    I want to extract a Query, using this transaction, to a fixed lenght .txt file. The query has a tabular structure like this:
    CHARACT1 | CHARACT2 | CHARACT3 | CHARACT4 | KEYFIG_MONTH1 | KEYFIG_MONTH2 | .... | KEYFIG_MONTH12.
    so i have a tabular structure with some CH and a KF repeated for the 12 month of the year.
    The problem is that the fixed lenght .txt file extracted with RSCRM_BAPI stops to the month 11, month 12 is discarded. If i try to extract a .csv file with the same query all the 12 month are included in the file.
    Question: Is it possible that RSCRM_BAPI has a row lenght limitation considering the fixed lenght .txt file?
    Many thanks in advance.
    Fabio

    How did you sechudle the Query/Report Using BAPI, i'm having similar Problem. Please Can you help me out.
    My problem is , i have a query which is schedule for every month 2 wed and a bapi is associated to The query.
    for some reason's the query is not working properly .
    Can you please help.

  • Help!  Problems with delta extraction

    Hi All,
    We've been trying to run a delta load of material master data and because there are so many change records (2.6m) it has been failing on memory errors.  We have now run full load and it completed successfully.  Ran delta again expecting that it would pull 0 records but it is still trying to pull all 2.6m records.  Ran init w/o data.  Ran delta again - still pulling 2.6m and failing. 
    Since we have successfully run full load, is it okay to delete the records from BDCP/BDCPS??
    Other suggestions??

    If you are not using it for other uses (eg. ALE with change pointers), it would be safe to remove the change pointers. You can use BD22 to delete them.

  • Pdf text extract problem with CID font and Identity-H

    Hi all,
    Iam facing some big problem with text extraction from pdf file.
    Currently iam using congviews pdf2xl text extraction tool.
    About 95% of the text extract correcly but few charaters showing box some ? and some dotted circle mark.
    Font Used:
    ArialUnicodeMS(Embedded Subset)
    Type:(True Type (CID)
    Encoding:Identity-H
    TimesNewRomanPSMT
    Type:True Type
    Encoding:ANSI
    ActualFont:TimesNewRomanPSMT
    ActualFontType:TrueType
    Anyone please help me to overcome this.
    Regards
    Gilbert.X

    I tried with acrobat pro9 export option it retrieved only alphabets and numbers all of the hindi charcaters showing just ........
    By the way how can i upload the my pdf file within this forum please guide me.
    Regards
    Gilbert.X

  • Extracting Open Items : Problem with mass activity FPBW

    Hi everybody,
    I need to extract Open Items in BW. I use the extractor 0FC_OP_01 which extract the content of table DFKKOPBW in OLTP. Open Items are written in table DFKKOPBW by the mass activity FPBW.
    I have a problem with this mass activity : the field "Business partner number" stay empty in table DFKKOPBW after the execution of FPBW, whereas it's not empty in table DFKKOP... (and for the cleared items it works...)
    Does anybody have a solution for my problem?
    Best regards
    Aube

    hi buddy,
    go to SBIW go to the setting for application specificdatasourse in that go to contact account recivable, click the fileds for extrction add the field the data to see in to dffkopbw table after mass activity
    regards
    nag

  • Download and extraction problems with CS6 Web and design Premium?

    I purchased CS6 from my university and upon trying to download it, the downloader that was downloading it stopped at around 85% and initiated a download cannot continue please contact [email protected] Upon chatting with two agents from the online chat, one of them directed me to download the trial version and activate it with the serial number I got when I activated the product. I got a download error when I downloaded it the first time, and the second time worked. When I went to sue the extract tool that I downloaded alongside the zip file, it worked for about 5 seconds, then I got a "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder." Theres 140GB's on the drive I'm extracting too, and the folder has full privelages. How can I fix this? Or do I need to angrily demand my money back? I already opened and used it so I can't take it back to the university, and I'm not paying 100$ (which is what I was told it would cost me) to have someone else fix something that should not be broken.

    Sorry, I feel your pain but you've posted in the wrong forum--this one is about Audition, the sound editing software.
    However, I'm a bit suspicious of the response you got.  As far as I know, the one part of support that is free from Adobe is still first-time installation issues and this is handled (usually) by phone with Adobe themselves.  Perhaps you're in a different situation because you purchased from your university but something doesn't smell right about what you were told and that email address you were given which isn't an Adobe one.

  • Problem with Extract Filter

    I have Problem with Extract Filter which was working OK until recently.
    Now, when I choose the filter the screen does not come up as the extract screen as it should and no other action can be taken except to press escape which returns me to normal. working.    Looks as if the extraction function has been sleected but does not show?
    I am trying to use the  extract on a layer.  Have tried to use it on a selection also.
    Anyone suggest a solution please?
    Bill

    Without a way to reset the tool, the only possibility seems to be to reset your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    (A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

  • HT201210 i have problem with my i pad mini  i tried to update my i pad then the download corrpted then the itones said that you most restore your device then i accept but its start extracting software above then  veriving restore with i pad finaly its sai

    i have problem with my i pad mini  i tried to update my i pad then the download corrpted then the itones said that you most restore your device then i accept but its start extracting software above then  veriving restore with i pad finaly its said the i pad cannot be restored....etc SORRY FOR MY BAD ENG

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I am having problems with the InDesign it won't download it keeps saying extract when its about 30% then it says failed. How can i get it to download all the way?

    I am having problems with the InDesign it won't download it keeps saying extract when its about 30% then it says failed. How can i get it to download all the way?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Problem with Text data Extraction from R/3

    Hi Experts,
    The problem is extracting Text data from R/3 system.
    Actually its an delta load.The load is running fine....but it is not bringing any data from the source system (R/3)0 Record.When I checked the table in R/3 system the data are there.
    I tried with Fullupdate too, still its bring 0 record.
    What will be the solution for this?
    Thanks in Advance!
    Regds,
    SPS

    Hello SPS, I cant remember very well, but when we found this issue, the problem was Language key. There was a problem with standard datasource.
    Did you try to find any notes for your datasource ?
    Hugs,
    Bueno

  • HT201407 After doing so, re-downloading the latest firmware 5.1 and extracting and verifying, it came to a point on iTunes where it could not at all, activate my iPhone. A message popped up on iTunes saying - "There is a problem with your iPhone"; We're s

    My iPhne is 4S, after I downloading the latest OS 5.1 and extracting and verifying, it came to a point on iTunes where it could not at all, activate my iPhone. A message popped up on iTunes saying - "There is a problem with your iPhone"; We're sorry, the iPhone you connected may be damaged and cannot be activated for service. We recommend that you visit your nearest Apple Store for more information. Please kindly suggest me how to do.

    Not surprised that you took a paragraph from my post to repost the same issue.
    It is a hardware/software fault which you'll have to get the iPhone replaced if you're under warranty.

  • A problem with 1CL_OLIS002 and 1CL_OMAT001 extractors - delta extraction

    Hi
    I have a problem with 1CL_OLIS002 and 1CL_OMAT001 extractors - delta extraction.
    Interrelated extractors: 2LIS_11_VAITM and ZMATBATCH_Attr work well.
    For 1CL's extractors I see current data in RSA3 but I don't see LUWs in RSA7.
    Extractors send 0 records to BW.
    There is no entry in "BIREQU* " job logs like this:
    "Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with xxx records".
    which I find in job logs when all worked well.
    We had some problems with R3. I had to restart job "LIS-BW-VB-APPLICATION_13*".
    May be it has influence on these extractors?
    Any suggestions about how to resolve the problem?
    Regards
    PWnuk

    Hi
    Can you please share the solution of this problem with me,I am also facing same issue of Delta not working but full load is working in 1CL_OBI_001?
    Edited by: Aseem84 on Jan 12, 2011 10:23 AM

  • A problem with copy/paste from extract panel in Dreamweaver 2014.1.1

    I have a problem with copy/paste from extract panel in Dreamweaver 2014.1.1 :
    Russian letters pasting in dreamweaver html in such way:  ffd0 ff9e  ffd0 ff9a ffd0 ff9e ffd0 ff9c ffd0 ff9f ffd0 ff90 ffd0 ff9d ffd0 ff98 ffd0 ff98
    Can you help? What could it be?

    Hi,
    I test the issue with my colleague and didn't find the same issue.
    Here is the screenshot:
    So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for

  • Get colour values from Placed (illus) EPS in indesign

    Hi Forum, There are ways to find colour values of the objects created in indesign native file. thanks to ~Trevor~ for have taught me, how to script & find fillColor using GREP preferences... but, is there any way to script "find color values on the p

  • Why all classes in javax.servlet.jsp are abstract?

    Hi all, I have two questions about how the package was designed: 1.) why all the classes in the javax.servlet.jsp are abstract? what is the benefits? 2.) why almost all the methods in the class, such as jspWriter, are abstract too? And we can use the

  • Apple Mail weird error when trying to trash email

    Last week I was making space on my hard drive by deleting a lot of messages and then emptying the trash.  The mail program became sluggish.  the next day I tried to delete more emails and started getting this message. "114606.emlx" couldn't be copied

  • Opening multiple images

    Ive converted an Action which opens multiple  (about 60) images into photoshop into Java script. which creates a rather lengthy result  as it opens each image separately here is 1 of 60 parts  of a single opened file // Open    function step2(enabled

  • Mail app crashes when replying to emails

    I received my shiny new iphone 4 this morning (I'm in the UK) and all seemed to be working well until I attempted to reply to an email arriving in my exchange account. As soon as I pressed the arrow (for reply, forward etc), mail app crashed, droppin