Problem with My First BSP Application

Hi
I have developed my BSP Application using the tutorial at http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
I created a Package, a BSP application and htm page.
I copied the code and activated both the BSP App and the page.
When i execute i get the following on the browser.
The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings
What is the problem
Sharath

Hi,
In order to see if the service is activated simply right click on it in SICF. There you will see whether or not the service is activated. Additionaly when you are activating the services from the OSS note you will see 2 YES buttons. Be sure to click the one on the right. Its the one with the little arrow and folder picture on it. Clicking this button will also activate the sub nodes.
Your BSP will be in the following path:
default_host/sap/bc/bsp/sap/yourbspname
Although you shouldn't have to activate it in SICF if its properly activated via SE80 and all the system services listed below are active.
Here are the BSP services that must be activated:
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/default_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/default_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
/default_host/sap/bc/bsp/sap/it00
/default_host/sap/bc/bsp/sap/sbspext_htmlb
/default_host/sap/bc/bsp/sap/sbspext_xhtmlb
/default_host/sap/bc/bsp/sap/htmlb_samples
Like I said make sure you click on the right hand side YES button to ensure all the sub node get activated as well.
It is not enough to just activate your BSP application node. All parents should be activated also. Doesn't hurt thats for sure
Let me know if this helps
Cheers,
Rich

Similar Messages

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working.

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Problem with layout in Web Application Designer

Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.

Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

Problem with ClassCastException in web application

Hello,
          I'm trying to deploy a web application in WLS 5.1 and I'm getting the
          "dreaded" ClassCastException every time when JSP tries to read a bean
          from the request or session. Under my architecture (actually it's just
          the regular "model 2" ) bean is populated by a servlet, set on the
          request and then retrieved by JSP (servlet forwards to JSP). Everything
          work fine when I register servlets in weblogic.properties, but
          ClassCastException is thrown on any attempt to read from the request if
          the same JSPs and servlets are deployed as web application.
          Has anybody come across the same problem?
          Thanks in advance for help.
          Alexander


Hello,
          This is all well and good as a temporary bug, but it's totally unrealistic for
          the future. Two points:
          * The ClassLoader doesn't need to be discarded, it just needs to be cleared.
          * Other servlet engines seem to be able to handle this.
          Hope it's on its way to resolution!
          TDoan wrote:
          > Alexander:
          >
          > I had some problem with ClassCastException, and recently I found out what it
          > was that causing it. I'm sure if this is the same problem you are having,
          > but please read the following paragraph.
          >
          > I cutted this from http://www.weblogic.com/docs51/classdocs/API_servlet.html
          > ClassCastException and HTTP Sessions
          >
          > You might encounter a ClassCastException while developing servlets that use
          > HTTP sessions. This could happen as a result of the following set of events:
          >
          > a.. You store a reference to a custom class, myFoo, in an HTTP session.
          >
          > b.. While in mid-session, you change your servlet (or JSP or JHTML),
          > causing it to be reloaded. In fact, it is necessary for it to be reloaded by
          > a completely new class loader, and the old class loader that had previously
          > loaded it must be discarded.
          >
          > c.. Because your custom class myFoo is also located under the servlet
          > classpath, it too is reloaded by the new class loader.
          >
          > d.. Now, when you retrieve myFoo from the HTTP session, you cast it to the
          > expected type, but you recieve a ClassCastException. The exception is thrown
          > even if class myFoo has not changed. Because it has been loaded by a
          > different class loader, it is regarded by the JVM as incompatible.
          > Note: If you are using session persistence, the class contents must be
          > serialized, and you will not encounter this exception.
          >
          > Here are some suggested work-arounds to this problem:
          >
          > a.. Do not place your class myFoo in the servlet classpath. Instead, place
          > it in the system classpath or the weblogic.class.path, which are accessible
          > by WebLogic Server. The class will not be reloaded when the servlet is
          > modified. This drawback to this solution is that you cannot prototype the
          > myFoo class, because you must restart the server in order to reload the
          > class after it is modified.
          >
          > b.. If you need to prototype the class, you can write a wrapper method
          > within it to store and retrieve its contents to and from the session. You do
          > not access the class directly from the session, but instead call it is
          > wrapper methods to store or populate it is contents from the session. As
          > long as you use standard Java class types to store the class contents, they
          > will not be reloaded when the servlet is reloaded. This approach has
          > performance drawbacks because your wrapper methods would need to set or get
          > multiple name=value pairs for each class's attributes.
          >
          > c.. Another work-around is to catch the ClassCastException, and replace
          > the old class that is stored in the session with a newly instantiated class,
          > or remove it from the session. Unfortunately, you lose the session data that
          > was previously stored in the class, so you must write your application to
          > handle this scenario. This is the easiest solution to the problem-remember
          > that you should not be storing critical information in an HTTP session, but
          > rather storing it in a database.
          > Note: The ClassCastException generally occurs while you are developing
          > your servlets, and should not be an issue in a stable production system. If
          > you are upgrading your system online, you might wish to warn your customer
          > base.
          >
          > Hope it helps,
          > Tin
          >
          > "Alexander Ananiev" <[email protected]> wrote in message
          > news:[email protected]...
          > > Hello,
          > >
          > > I'm trying to deploy a web application in WLS 5.1 and I'm getting the
          > > "dreaded" ClassCastException every time when JSP tries to read a bean
          > > from the request or session. Under my architecture (actually it's just
          > > the regular "model 2" ) bean is populated by a servlet, set on the
          > > request and then retrieved by JSP (servlet forwards to JSP). Everything
          > > work fine when I register servlets in weblogic.properties, but
          > > ClassCastException is thrown on any attempt to read from the request if
          > > the same JSPs and servlets are deployed as web application.
          > > Has anybody come across the same problem?
          > >
          > > Thanks in advance for help.
          > > Alexander
          > >

Problem with installFolder in air application

hi! happy new year !!! enjoy for 2011!!!
so i have 1 little problem with <installFolder>
i need to install my app in documents directory...
is possible?
i put my path: <installFolder> C:/Documents and Settings/Utente/Documenti\</installFolder>
but nothing . . . why??
help.....

It seems you are doing right thing. But what could possible is , on Siteminder Policy Server, there is Parameter called ACO that will have a definition for Logging off url . Its LogoffURI parameter. Unless it is set , though you clean up the session in browser when user click on logoff url, the session is still available on siteminder policy server cache. Thats why when user access the application url within the same browser window he is getting application pages. So check with siteminder administrator on your end...

Problem with icons in the application bar (Photoshop CS4)

My computer's OS is WinXP Pro SP3.
I just now noticed a problem with all icons in the application bar in PS CS4 (v. 11.0.1).
When I bring mouse over icons (except for zoom level icon), all icons turn into blank (white) boxes.
For "Arrange Documents" bar, when I click on its blank icon, the top two columns are empty but show the the rest of three columns.
Please advise me how to fix this problem. I hope to avoid uninstalling -reinstallinlg. Thanks.

ATI no longer supports your card so I don't think you will see any updated drivers from them to correct your problem. You might want to look into investing in a newer card.
http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_xp.aspx?type=2.4.1&pr oduct=2.4.1.3.23&lang=English

Problems with the first USB port

Hi,
I'm having a problem with my 13 inch i5 Macbook Pro
For some reason my first USB port isn't working well, doesn't matter what, i plug in it just won't recognize anything.
But whenever I restart my mac, everything works well, and after about 2~3 days it stopps again and I have to reset or log out my mac again..
I tried to reset the SMC and the PRAM, it didn't work
This is freaking me out, I've never dropped my mac or something. It's not really old bought it in august.
I also upgraded to lion, it didn't work sadly and this problem still exists.
I'm pretty sure some people have this too, this is not an hardware issue, it's a software issue
Does anyone got any idea?
Thanks

ElectroSpyzz wrote:
this is not an hardware issue, it's a software issue
How do you know?

Problems with MBOX (first version) with new Logic Pro 9 - only Input 1 work

Hi,
i never had problems with my old MBOX. Since 2 days I switched to Logic Studio 2 and Logic Pro 9. Very nice realease, but: when I create an audio object and choose the inputs in the channel strip for the MBOX, i only get Input 1, no Input 2! When I connect my MBOX in Logic (Audio Preferences) and launch with my started Logic, both Inputs are avaiable and both are working correctly. But never after having started Logic 9...
Any ideas?
I never had this problem with Pro 7 or 8.
Greetz,
Axel
MAC OS X 10.5.8
coreaudioinstaller_v74249904 for MBOX
Mac Book 4GB Intel Dual Core 2.1MHz

Omg.... I't my total memory mistake !! lol
Sorry. Sorry.. Totally wrong post
Really - Logic Remote is only Logic X App....
Shame ... Thanks The Art Of Sound ...
Btw.... May be someone know iPad tool for remotely controlling Logic Pro 9 ? It's need me for recordings - i play on guitar and want remotely control Logic from audio isolated room...

Hi, I'm having a problem with my first gen. iPad switching back to the apps page by itself. This started after upgrading to ios5. It will do this from safari or kindle. I have turned it off manually as suggested by a tech rep. without any improvement.

Hi,
My 1stgen iPad keeps. Switching back to the apps. Pages by itself after installing ios5. I have shut it down manually as suggestedby a tech rep but the problem still exists.
Thanks, Jim

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Problem with My First BSP Application

Similar Messages

Maybe you are looking for