Problem with my hotspot

I have two Iphone 5's,
A/ On my Iphone5 i have linked it with my son's Ipad through WiFi, on day two of tryin this i cant find my hotspot name!! I have tryed looking for the hotspot through my laptop and can see it.... help!!
B/ On my wife's Iphone5 i cant even see the option of turning on the hotspot!!!!! again please help!!!
Many thanks for all that look and help
Lee

For B, make sure that your carrier has enabled the hotspot feature, otherwise you won't be able to use it.
For A, try the three R's. First, restart the device (hold sleep/wake, slide to power off), if that doesn't work reset (go to settings > General > Reset > Reset Network Settings), then if that doesn't work create a backup using iTunes and restore the device as new.

Similar Messages

Robohelp 8 for Word: Problem with the Hotspot Topic

Hello Everybody:
I'm a beginner user of Robohelp 8 for Word trial version. My project is a WinHelp 2000, imported from a version X3, and I have a problem with Robohelp when I save the value "Topic" of the property "Jump" of the tab what is called "General" at the window "Hotspot Properties". This Hotspot is part of a Shed Image (accesible from Help Image Properties > Shed ... > Image Workshop > Properties button). After edit the topic, I press the "Aceptar" (OK) button (note that I use a Windows XP SP3 Spanish Version and some buttons are located) and close the Hotspot Properties window, and I close Image Workshop window too.
If immediately after I open the Image Workshop window and the same hotspot property window edited before, Robohelp lose the new value "Topic" and only it puts one letter. When I make the compilation they are multiple errors like this: HC3025: Warning: ESTA0058_2.SHG : Jump to undefined Topic ID: "A".
Please, help me. Thank you very much.
P.D.: This image shows the problem:

The licence you bought was for RoboHelp Office which includes both the RoboHelp for Word and RoboHelp HTML applications. Each of these three has it's own installation file so I suspect that they have installed just the RoboHelp HTML application. They should have the details for the RoboHelp for Word application, or better still the RoboHelp Office application which gives you the options of what to install according to your needs.
The RoboColum(n)
@robocolumn
Colum McAndrew

Intermittent problem with Personal Hotspot

Hello All
I think either my iPad 2 or my iPhone 4 is mental. Can anyone convince me otherwise?
For some months now I have been experiencing an intermittent problem with tethering my iPad 2 to my iPhone 4 Personal Hotspot.
Sometimes it works without a hitch (although I have to turn the Personal Hotspot on the phone off and on again to get iPad to 'see' it) and at others, like now, it shows me the message 'Unable to join the network 'iPhone'. It throws the message up so quickly that even though it 'sees' the phone in the list of networks, it behaves as though it can't actually be bothered to even try to connect.
I have tried reboots and restarts, 'forgetting' the network, changing passwords, sacrificing a chicken... all the usual stuff. But still when it gets in this kind of mood it stubbornly refuses to do anything. I have even taken it to the Apple store where, not surprisingly it worked first time and the assistant looked at me as though I was an idiot. It then proceeded not to work for a couple of days again as if punishing me. There is no problem with the general Wi-Fi connection as I have another phone (an Android) that I run as a Hotspot too. It has never once had a problem connecting to this or any other Wi-Fi connection..
Confusingly, and rather irritatingly, after a few days of this not-connecting lark it will have a few days of not having a problem connecting at all. I won't have changed any settings on either iPad or iPhone and so I have no way of figuring out why this is happening. This has been the same situation with all versions of iOS I have installed ever since buying the phone in April 2012, and the iPad in June 2012.
Please, is there anyone out in the ether that can suggest a solution to this? Or is one of my Apple products simply mad? I have given both devices a strong talking-to, but this hasn't sorted the problem either. Next, I think I might have to try sacrificing a goat.

I have the same issues with my iPhone 5 (6.1.4). I do not have an answer for you, and perhaps my "workaround" will lead someone with more knowledge about these things to offer us more information.
When I turn on the Personal Hotspot and it does not show up as visible on my iPad or MacBook, or offers that ambiguous message about being unavle to join the network, I perform a few steps that almost always resolves it. I have to go through these steps twice sometimes. The order of operations seems to affect the outcome (at least it appears to me that it does)
Turn off WiFi on the client device (iPad, MacBook, Windows laptop, KindleFire, etc)
Turn off Personal Hotspot on iPhone
Turn off Bluetooth on iPhone
Turn off WiFi on iPhone
Then turn on Personal Hotspot and allow it to automatically start WiFi and Bluetooth.
Turn on the client WiFi services.
Connection successful!
As I said, I sometimes need to perform the steps ablve twice, but it eventually works. It is incredibly frustrating to go through these hoops to make the device perform. I do not know precisely when the problem began to occur, but I don't think it did not occur on my iPhone 4s with IOS5.
Any help from the Apple guys would be appreciated. I think it is a software issue, because the shutdown of services and restart seems to resolve the issue. I guess I might take a trip to the Aple Store to have them look at this behavior.

Problem with rollover hotspot behaviors & centering page

Good Morning,
I have reviewed numerous forums and tutorials in search of an answer to my problems but have failed to resolve them.
I am hoping that the experts in this forum can assist.
Here are my current issues:
Cannot seem to apply ANY behaviors to my hotspots. I would like to have the hotspots be highlighted or fade in/out upon mouseover. When I try to apply, nothing happens.
I would like to have the page centered at all times with a black background around it. Can't seem to get this to happen either.
I do not have any code in place for either of these because they would not work. So I figured I would start here.
Below is the link to my project, please let me know if you need anything further so that I can help you help me.
Thank you in advance.
http://www.saintleo.edu/uploads/VirtualTour_test-Copy.html

Hi Nancy,
Thank you SO very much for your response. I followed your instructions to center the page and it appears that it worked!
However, I am having trouble with the suggested maphighlight script.
I added the suggested code via Dreamweaver, however, when I view source code after saving, I don't see it.
I'm so confused.
This is the code that I have in Dreamweaver:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

<script type="text/javascript" src="http://www.saintleo.edu/uploads/jquery.maphilight.min.js"></script>

<script type="text/javascript" src="http://www.saintleo.edu/uploads/jquery.maphilight.js"></script>

<script type="text/javascript">
$(function() {
$('img[usemap]').maphilight();
</script>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
body {
background: #000;
width: 1000px;
margin: 0 auto;
</style>
</head>
<body>
<img src="http://www.saintleo.edu/uploads/virtual_tour_board.jpg" width="1024" height="640" border="0" align="absmiddle" usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="73,147,193,249" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_Abbey_4.0.mov" target="_blank" alt="St. Leo Abbey" />
<area shape="rect" coords="266,147,398,250" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_Athletics_4.0.mov" target="_blank" alt="Athletics" />
<area shape="rect" coords="476,146,607,249" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_CommunityCtr_4.0.mov" target="_blank" alt="Student Community Center" />
<area shape="rect" coords="63,303,191,404" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_CrawfordHall_3.0.mov" target="_blank" alt="School of Education & Social Services" />
<area shape="rect" coords="267,305,397,405" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_Freshman%20Dorm_4.0.mov" target="_blank" alt="Freshman Residence Halls" />
<area shape="rect" coords="475,306,605,407" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_LewisHall_4.0.mov" target="_blank" alt="School of Arts & Sciences" />
<area shape="rect" coords="63,457,193,558" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_Quads_4.0.mov" target="_blank" alt="Residence Apartments" />
<area shape="rect" coords="268,459,396,559" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_StudentAct4.0.mov" target="_blank" alt="Student Activities Building" />
<area shape="poly" coords="464,467,582,513,546,608,427,559" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_TapiaBusiness_4.0.mov" target="_blank" alt="School of Business" />
<area shape="poly" coords="887,8,1015,50,980,158,853,116" href="http://www.saintleo.edu/uploads/Merit_Andrew_Rough_Cuts/STLEO_Overview_4.0.mov" target="_blank" alt="Overview" />
<area shape="circle" coords="806,348,51" href="http://www.saintleo.edu/admissions/undergraduate/visit-saint-leo.aspx" target="_blank" alt="Schedule A Visit!" />
<area shape="rect" coords="625,598,736,624" href="http://www.saintleo.edu/admissions/undergraduate/request-information.aspx" target="_blank" alt="Request More Information!" />
<area shape="circle" coords="965,604,28" href="http://www.saintleo.edu/admissions/apply-online.aspx" target="_blank" alt="Apply Now!" />
</map>
</body>
</html>
Could you possibly take a look and see what I am missing?
I can't express how much I appreciate your expertise and assistance.
I am extremely thankful for your time and guidance.
http://www.saintleo.edu/uploads/VirtualTour_test-Copy.html
Kind regards,
Jason

Problem with Mobil Hotspot, prevents downloading of Android OPS.

I could not download an update to my tablet android operation system. After lengthy discussion with Google tech support, they said the problem had to be with my service provider. They recommended I go to a public place with WIFI and try the download. I did and it downloaded fine. Anyone have the same issue with a mobile hot spot and did you get it resolved?
Thanks

I have the same issues with my iPhone 5 (6.1.4). I do not have an answer for you, and perhaps my "workaround" will lead someone with more knowledge about these things to offer us more information.
When I turn on the Personal Hotspot and it does not show up as visible on my iPad or MacBook, or offers that ambiguous message about being unavle to join the network, I perform a few steps that almost always resolves it. I have to go through these steps twice sometimes. The order of operations seems to affect the outcome (at least it appears to me that it does)
Turn off WiFi on the client device (iPad, MacBook, Windows laptop, KindleFire, etc)
Turn off Personal Hotspot on iPhone
Turn off Bluetooth on iPhone
Turn off WiFi on iPhone
Then turn on Personal Hotspot and allow it to automatically start WiFi and Bluetooth.
Turn on the client WiFi services.
Connection successful!
As I said, I sometimes need to perform the steps ablve twice, but it eventually works. It is incredibly frustrating to go through these hoops to make the device perform. I do not know precisely when the problem began to occur, but I don't think it did not occur on my iPhone 4s with IOS5.
Any help from the Apple guys would be appreciated. I think it is a software issue, because the shutdown of services and restart seems to resolve the issue. I guess I might take a trip to the Aple Store to have them look at this behavior.

2 problems with mobile hotspot mode

hi all
1.The hotspot mode disconnects when receiving a call.
2.Sometimes (often) the devices connected lose Internet (but still wireless connected ) and only a restart of the BBry solves it .
These two problems are experienced by several BB of the company
Q5/Q10 v 10.2.1.2102
Any ideas ?
thanks a lot

As you can read in my previous post , I write that must be restored only SMS and Messages,
It can be done from Backup and Restore in Desktop Manager ->Advanced menu. In left side choose your backup file
Before restoration in Option->Device->Advanced System Settings-> Service Book (for OS6) type <Alt>SBEB.
Be sure to click Likes! for those who have helped you.
If your query is resolved then please click on “Accept as Solution”.

TS2756 hotspot is not working on myiPad 3, hotspot tap is cellural data always appear that it is searching, and never stop. Vodafone and tradeline told me that there is no problem with carrier and Sw. Tethering data is never kept.

Hotspot appear always to search and never stop
internet is not working without internet APN data
Tethering APN never save the data
Vodafone carrier checked and mentioned that the no problem with the SIM
Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
Please advice

I have this _same_ issue, exactly. Initial backup goes just fine, but incremental backups fail. And like you, I replaced the internal drive.
The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago. The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC. But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago. I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail. This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
I'll be checking into this thred to see if others have the same issue, or if a solution is found. Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
-Gizm0d0

Problem with ALV Grid Hotspot

Hi ,
I am having a problem with Hotspot <<removed_by_moderator>>
I need to Open up SE16 and need to skip the first screen of the Table 'ZLE_WH01' and display the selection screen with the MATNR passed from my ALV Report.
I tried using Call Transaction and Submit commands, but couldn't achive my target.
when I used SUBMIT and pass the MATNR Value to the SE16 selection screen for the corresponding Table, the value is appearing in the MATNR field of the Selection screen but the Execute button is not working.
When I try the Call Transaction Method, the value is not capturing in the 2nd screen. Table name is capturing in the first screen.
Kindly advice me how to resolve this issue.
Regards,
Srinivas
Edited by: Vijay Babu Dudla on Feb 25, 2009 11:08 PM

For se16
Use fm SE16N_INTERFACE
a®

Is there a known problem with the iPhone 4 personal hotspot? I have not been able to use this feature for about 3 days with any of my other idevices - it does not come up as available.

My iphone 4 never had a problem with the personel hotspot until 2-3 days ago .
Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on both the phone and the other devices (ipad x 2 and ipods x 3). This is very frustrating.
Oh and I have spoken to my carrier it is not them.
Any suggestions?

Setting >> General >> Cellular >> Cellular Data Network >> Reset Setting
Restart (hold on/off button >> slide to power off)
I got same prob after update ios 6.1 (not sure during update to 6.0.1) iphone 5

MacBook Pro problem with iPhone personal hotspot connection

I think there is a problem with my airport, I can't connect to any iPhone personal hotspots anymore - I used to be able to connect to them, and now it connects but with an exclamation mark saying there is no internet connection? Any help would be great!

Apple doesn't participate here. If you want to give them feedback, use the Feedback page:
http://www.apple.com/feedback

Verizon Jetpack 4G LTE Mobile Hotspot 890L. Is there a problem with Windows 7?????

I have Verizon Jetpack 4G LTE Mobile Hotspot 890L. Have had it for almost 2 years. I was on the internet with my Dell desktop and all of a sudden got a message "not connected to Internet". Spent an hour with Verizon and the Jetpack works fine on my NOOK and another tablet and they said to call Dell. After an hour with them they said Windows 7 is not compatible with a HotSpot and they do not support it. I had a friend check out my computer (as Dell wanted over $200) and found nothing wrong and it connected fine to his wifi, with no problem. So HELP what is wrong with my Verizon Hotspot??

I don't see that anything is wrong with your Hotspot from the description you posted here.
First of all the network status indicator built by Win7 is not 100% reliable to begin with. MS has a simple algorithm that it uses to check internet resources. When those resources do not respond the status indicator will bounce back and update the user accordingly. You should always perform your own internet check by manually navigating to Google.com or another public website rather than depend on what Win7 is telling you.
Second of all you know your Jetpack was working because your other personal devices were working. This makes me think there was some kind of a temporary glitch that would normally be resolved by rebooting either the Jetpack or your PC.
Finally, Dell does not support VZW devices. When they say the hotspot is not supported they mean Dell does not support VZW products. You may have misinterpreted what was said. Dell is only going to support the Dell PC hardware and very basic Win7 problems such as walking you though the connection process. When something is wrong with the network connection they will always tell you that it is not supported as they have no control over 3rd party vendors. Win7 supports the Jetpack just fine, the Jetpack is a WiFi hotspot just like any other from Win7s perspective.
If you are having more troubles in the future then I suggest starting with a simple reboot of your devices. Post back to us here and let us know if that is the case or not.

Problem with WiFi while traveling - connects to Hotspot, but cannot open page in Safari

Local (hotel) hotspot requires login - fine, have account. But Safari only takes me to login page sometimes, other times simply gives "Safari could not open the page because the server stopped responding." Server has not stopped responding, e.g. I can reach it with a laptop. Problem is Safari refuses to give up on stale connection, start over. Same problem with iPad. Same problem with Google browser (different verbiage). Have tried turning off, on WiFi, rebooting device. Any tips on how to get Safari to let go and start over so it gets to local login page?

Found this on another discussion: go to your setting - general - reset - reset network setting
This is a brutal step, should be completely unnecessary, but it seems to work.
Apple needs to fix this - obviously from other discussions, many people are encountering similar problems.

Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

Same problem for me: Since update to Lion my WLAN connection to my router (AVM fritz!box fon 7141) get's lost almost every time the computer is on idle for a couple of minutes. Deactivating and reactivating helps, but of course only until the problem occurs again.
BTW: I'm running Mac OS X Lion (10.7.3) on a iMac 27" 3.2 GHz i3 (mid 2010 model).
I'm really annoyed by this problem and looking forward for APPLES fix.

After updating my ipad to 6.0.1, it will no longer connect to personal hotspots on any make of phone. Can someone tell me if it is a problem with the software?

Is anybody have the same problem as mentioned above?

First the formatting tags should be "[ ]" not "< >".
I was told you should avoid calling a method from itself is this true?Recursion is a valid programming technique and in fact makes many algorithms much easier to code.
so I don't know if what worked for me will work on a lower end machineIt may be a little slower but it will still work. Recursion only causes a problem with resources when you have many levels of recursion. On my system I have:
C:\WINDOWS\TEMP\Temporary Internet Files\Content.IE5\
In this case there is only 4 levels of recursion. This is not going to cause a problem. You would generally only have problems if your recusion routine is not working correctly and you get in an infinite loop which will lead to resource problems and an abend.
In your particular case you aren't even using many resources at all since all you are doing is printing the file name.
This [url http://forum.java.sun.com/thread.jsp?forum=57&thread=435487&start=3&range=1]post shows a recursive routine that list all files for a directory and displays them in a table. In this cause you might have a problem with resources depending on the number of files in the directory. But the resource problem is because of the memory to hold the filenames in the table, not because a recursive routine was used to get the filename.

Problem with threads hanging

We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start   (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?

Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy

Problem with my hotspot

Similar Messages

Maybe you are looking for