Problem with my infocube

Dear Experts!
Hello & Good Morning!
I have created one infocube with dimensions Customer No, Material No, Sales Rep No, and Key figures as Price of Material(currency), Quantity(number) and Sales Revenue(currency). This is my data target.
In my flat file I have all the data except the sales revenue column. Sales Revenue has to be calculated as price * quantity in the transformation.
My question here is while creating the DataSource, should I define the infoobject for Sales revenue under the tab u201Cfieldu201D as it is not coming from the source? Second while in the transformation I have included price and quantity as source field from sales revenue and wrote a routine but when I come back and hit the u201Ctransfer valueu201D button below it gives me lot of error as data type miss match and so many things....I am not able to save and activate the transformation, the error are like these, please help
@5C\QError@     Rule (target: Z15S_PRC, group: 01 Standard Group): Conversion type missing     @5F\QNo long text exists@
@5C\QError@     Rule 4 (target field: Z15S_PRC): Field /BIC/Z15S_PRC must be assigned to an InfoObject     @35\QLong text exists@
@5C\QError@     Rule (target field: Z15S_PRC): No source unit assigned     @5F\QNo long text exists@
@5C\QError@     Rule (target: Z15S_REV, group: 01 Standard Group): Conversion type missing     @5F\QNo long text exists@
@5C\QError@     Rule (target: Z15S_REV, group: 01 Standard Group): Conversion type missing     @5F\QNo long text exists@
@5C\QError@     Rule (target: Z15S_REV, group: 01 Standard Group): Conversion type missing     @5F\QNo long text exists@
@5C\QError@     Rule (target: Z15S_REV, group: 01 Standard Group): Conversion type missing     @5F\QNo long text exists@
@5C\QError@     Rule (target field: Z15S_REV): No source unit assigned     @5F\QNo long text exists@
Regards,
SP

Paul ,,
This is Genral problem ,
It is asking the conversation type go for Keyfig(=) in transformations there is symbol like (=)
click on that symbol , Change the Conversion type as No Conversion ,
do this for all keyfig s
You are given the conversion as fixed i mean qty fixed(KG)
profit(INR)
So that it asking for Conversion
Regards
Praveen

Similar Messages

Problems with FI Infocubes activations

Dear Reader.
I am having trouble activating the FI infocubes (GL, AP, AR AA) in DEV, QAS, PRD.
In BID the infocube looks active with active transfer rules, etc.. in the infoprovider list but when i double click the infocube it shows "in process". how is this possible. without noticing this initially, i transported the infocube from DEV to QAS and to BIP. How to activate the infocubes. I need to schedule the data in PRD from tomorrow and i am having this crisis. YouR help in this matter will be highly appreciated and also further, do i need to activate all the BCT objects again in DEV and then transport again to QAS & PRD.???

Hi,
There is no problem in having version as In progress.
Object information :
Save : Saved
Revised Version : Active Version
Object Status : Active executable
If object information of your FI cubes matches with above mentioned statuses then you should be able to load data succesfully. You will get above statuses under Version tab only.
Please let me know if you need more information.
Regards,
Viren

RSRV issue (problem with repairing Infocube)

Hi Experts,
I have an issue with RSRV or repairing my InfoCube object. Everytime I analyze my cube (using RSRV), it returns warning message saying "Dimension ZCGILFCST3: DIMID 106 is not posted". Hence, when I do the repair or executing the Correct error function, it gives me a message of "Error during repair; repair probably not successful".
What do i need to do with this issue? What exactly the "not posted" issue means?
Please help me.
Thanks a lot,
spinhead

Hi ,
Thanks for the info.
However, the Correct Error function could not remove the unused data (DIMID 106). As background, we do before deletion of unnecessary data in the cube before we do the RSRV (analysis and repair). Now, as mentioned, when we analyze the cube it returns error message and the repair function could not correct or remove the identified erroneous data.
Actually, it is not only DIMID 106 data which the system says as erroneous record instead it returns a lot (DIMID: 104, 107, 108, 355 and so on). Meaning, no definite number of erroneous data yet. We already checked those data in the cube (directly in dimension table) and found out that all of it are needed data and must not be deleted.
I hope someone could give me exactly what the "not posted in the InfoCube" means and help me out with this issue.
Kindly help experts
Thanks a lot

Problem with Authorization for Planning folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
Abraham

Calling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category                   Internal Kernel Error
Runtime Errors         PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
    An error occurred during the receipt of a complex parameter.
What happened?
    During a remote function call, an error occurred while converting
    a complex parameter.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred during the conversion of a complex parameter.

Problem with Authorization for BW BPS planning Folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
Abraham

HI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham

Problem with Dates in the Web Intelligence

Hello Everyone,
I am facing a problem with the Web Intelligence Report, in the universe there is a Date field (L01 Date and L01 Date Key). In the report Web Intelligence when i use L01 Date Key it works fine (like 10/07/2010), but when i use L01 Date it shows a Strange Date like 31/12/69. I´ve already tried out with another infocube and query, but the value is the same (31/12/69).
Does anybody have any idea ?
Regards,
Jordan.
Edited by: Jordan Silva on Jun 10, 2010 10:08 PM
Edited by: Jordan Silva on Jun 10, 2010 10:09 PM

Hi,
The problem is coming because L01 field contains summary data of L01 filed and L01 key field contain actual value of that field.
so date field cant be summarize so that's why you are getting an error. Please check with some non date field. hope it will work perfectly fine.
regards,
SG

Problem with delete index of cube in process chain

HI ,i have a problem with my process chain,here on process name as delet index is ther which has been turned to red.when iam going inside of that in Display message iam getting the msg as"Indexes for InfoCube SMS_C06 have been deleted successfully".
since the process is in red next process is not been triggering,but i have to continue the process chain.
can anybody put some light into it.its very urgent........

Hi,
I ran into the same situation with one of my process chain that is part of a metachain. The process chain has the Delete Index that turned red. But the messages show that the indexes on all the cubes were deleted sucessfully.
As suggested, I did a repeat on the delete index variant, but no luck as it turned red again.
Anyone aware familiar with this issue?
Thanks,
Briston

Problem with variable name in ZXRSRTOP include (virtual KF)

Hi all,
I am coding a routine to use a virtual key figure in the BEx.
I have just a little problem with the name of a variable:
as explained in the documentation, I created the variable with the prefix G_POS_, the name of the infocube and the name of the infoobject all together:
DATA: G_POS_BC_ST_003_C_DIV__C_COMPAR type i.
The problem is that this variable name is longer than 30 characters, so the system doesn't accept it.
Is there a workaround, other than changing the name of the infoobject (which is a navigational attribute)?
Any help would be appreciated.
Loï

Hello Marc,
I understand that I have to use a concatenate function and a dynamic call of the variable with (variable) instruction, but i do not understand how to implement it.
the infocube name is BC_ST_003
the characterisdtic name is C_DIV__COMPAR
So, in the include ZXRSRTOP the statement
DATA : G_POS_BC_ST_003_C_DIV__COMPAR
does not work due a length problem (see first post)
But in the same include the statement
+DATA: l_global_name type c.
concatenate 'GPOS' 'BC_ST_003' 'C_DIV__C_COMPAR' into l_global_name separated by '_'.+
drives to the following error : statement is not accessible.
Could u please provide me with an example of the code in the include ZXRSRTOP, and in the include ZXRSRZZZ for the use of this variable.
Thanks in advance.
Loï

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Problem with ODS activation -- Urgent

Hi All,
I have a problem with ODS activations, when I trying to activate ODS data automatically/ Manually. It is going to short dump.
Could you anybody pls help me in this issue.
Thanks in Advance
Narendra

Sorry for delay,
I raised an OSS messsage and waiting from reply.
The ODS fetch the data from 6 sources. all the 5 sources data is correctly updating in the ODS. I have ODS activation problem with only one soure data.
The error is
RSMO
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
Activation of data records from ODS object ZPMPRCST terminated
SM37 Job log
Error Message from Job log (SM37) (Highlights of the Job log)
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
RSODSACTREQ Table Entries
Table:          RSODSACTREQ
Displayed Fields: 10 of 10 Fixed Columns:                3 List Width 1000
InfoCube       Request ID                     Data packet number             Boolean    Boolean   Request ID                                                 ODS operation    Activ. status
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000000             X       X             ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                         0
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000001             X                       ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                        4
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000002             X                       ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                         4
ZPMPRCST     REQU_49Y4VOQEDO6H73KDE354JNDB5 000003             X                       ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9     A                         4

Problems with concat-function in xdofx-paragraph

hi their,
i have a problem with the concat-function in xdofx-paragraph.
i fill variable with the decode-function and i will these evaluate in if-then-else-statement. it must be nested.
now i would like to bring together element tag(field) with variable, but those not work.
i try the simple if-statement and it works. why?
<?variable@incontext: v_sa?><?xdofx: decode(SA, ’GS’,’Grundschule’, ’MS’,’Mittelschule’,’GYM’,’Gymnasium’, ’BS’,’Berufsschule’,’AFS’,’Förderschule’,’B2’,’2.Bildungsweg’)?><?end variable?>
don't works
<?xdofx:if SA and SPR then concat(SPR,string($v_sa)) else SPR end if?>
works
<?if: SA or SPR?><?if:SA and SPR?><?concat(SPR,string($v_sa))?><?end if?>
can anyone help me, please
thanks a lot for advice
best regards
Holger Hauschild

I don't know if you ever resolved this, but you may just ned to change a setting on your query properties. When data is entered into planning layouts and saved, that data is put into a "yellow" request in the underlying infocube.
Until the necessary volume of data is posted which causes this to change to "green", it remains yellow. Note that this request could also be changed to green several ways. i.e. manually, by flipping the "real-time infocube behavior" switch, etc.
Anyway, as long as it "yellow" your query, by default will not consider it, unless you change it's properties to tell it to consider "yellow" requests. This can be done via RSRT and pressing the "properties" button. Choose request status "2" and your problem should be solved

Problem with extractors after system copy

Hi Gurus!
After system copy I have problem with export data source from infocubes. Logical system name was converted with BDLS. When I check any export datasource (8*) with transaction RSA3 system tell me that no data records was found though data in fact table every infocube exist (in SE11). What can I do to solve this problem?
Thanx.

Hi,
Of course I tried reactivate myself source system but problem is still here. When I check extractor (with RSA3) of any data source of any infoobject (master data) - everything is OK. When I check extractor for export data sorce - I have problem.
to Mickael: In modeling every thing is OK.
Thank you for all answers.....

Problem with inverted commas in texts in WAD

Hi all,
I've a problem with description texts in WAD. In a graph where one of the columns have the description, let's say something like ' bla"bla ' (in Hebrew we've texts with inverted commas in the middle of the word) and when I point with my mouse on the point to see the value in numbers the text is cut. let's say 'bla"bla' had 15 value it wouldn't show it, but it would show 'bla'. if the text is ' bla ' with value 18, it shows ' bla 18' .
How can i solve it?
thank you,
Yoav.

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

Problem with my infocube

Similar Messages

Maybe you are looking for