Problem with my iPhone 5 when using my bluetooth Nokia CK-7W

Hi
My iPhone 4 works fine with my Bluetooth but for some reason when I use the Bluetooth device above with my iPhone 5 whoever I am talking too can only hear me when it is silent at their end. As soon as they make a noise or a dog barks etc it will cut me off for them to speak therfore only allowing a oneway conversation.
I have reset the Nokia CK-7W, I am on my second phone, I am on my second Sim and have tried to reset the phone back to factory settings and it still happens. Please help me?

Thanks however it is not a headset it is a built in handsfree unit. I have spoken to my husband while he is using the iPhone 4 through the device and it does not happen then only when my iPhone 5 is connected to the bluetooth. Any more ideas?

Similar Messages

I have problem with my iphone 5 when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is that possible

I have problem with my Iphone 5, when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is ti possible to lock the screen when incomming an outgoing call going on

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

I have problem with my iphone 5 ,when i switch on cellular my Mobil will be out of coverage and once i switch off it will be ok,what should i do ?

i have problem with my iphone 5 ,when i switch on cellular my Mobil will be out of coverage and once i switch off it will be ok
any body can help?

Have you contacted your carrier to ensure cellular data is provisioned properly for your account and iPhone?

I have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate

i have problem with my iphone 4S when i put in it sim card from another country the iphone does not activate the serial No. DNTHNQZFDTD2 i bought my iphone from sweden , when i put in it iraqi sim card the iphone does not activate

What exactly happens?
Error message?
What does it say?
Please explain your issue.

Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caler canno hear me speak. Sometimes the problem goe off and works properly, b most of the times, I am facing this problem.

Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caller cannot hear me speak. Sometimes the problem is nt there and works properly, but most of the times, I am facing this problem. I have tried plugging in the earphone and speak, but its the same.... can anyone advse what may be the problem?

iphone 4g have this problem
first solution :change the flex micro
second solution : ic audio must reballed
also watch video
http://www.youtube.com/watch?v=C-n1LJEK3PM
http://www.youtube.com/watch?v=prSZ9yJnofY
http://www.youtube.com/watch?v=tkEiR6OPhhc

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Problem with logic:equal tag when used with bean:write

Hi All,
I have a problem with logic:equal.When i tried to use the following piece of code its not working
<logic:equal name="var in session" value="<bean:write name='var in request'/>">
Do some thing
</logic:equal>
its not working i know we cant use nested tags
is thr any alternative instead of using a scriplet

A scriptlet expression is about all you can do.
<bean:define id="tempVar" name="var in request"/>
<logic:equal name="var in session" value="<%= tempVar %>">
...If you have a JSP2.0 container with EL enabled, then you could use an EL expression instead of the standard <%= expr %>

[SOLVED] Problems with systemd's journal when using syslog() in C

Hi,
I have a problem with journalctl and syslog output within a C program:
When I use journalctl in follow mode:
$ journalctl -f
and I run the folowing program in another terminal
#include <stdio.h>
#include <syslog.h>
int main()
FILE *pf;
int i;
/* logging made in file /var/log/syslog */
openlog("martins",LOG_CONS,LOG_USER);
pf = fopen("not_here","r");
if (!pf)
syslog(LOG_ERR | LOG_USER,"oops -- %m\n");
return 0;
no syslog error message appears in the journal.
But, when I modify the programm by adding a 'sleep(1);' right before 'return 0;'
there is a correct error message shown in the journal.
Is this a bug in systemd? Or do I understand something wrong with systemd's journal?
I'm actually running
linux-3.10-12-1-lts
systemd 207
with a 32Bit installation
Thanks for any hints,
Martin
Last edited by thesofty (2013-10-01 19:10:13)

Now, I understand what's going on:
1) There is an known issue about a race condition in journald when the logging process exits. In this case the message isn't assigned to the user whose process generated the message.
2) Apparently the group of the journal files have been changed from 'adm' to 'systemd-journal' in Arch Linux around April 2013.
But still I only have been member of 'adm' as described in the journal tutorial on http://0pointer.de/blog/projects/journalctl.html. So I can only see syslog messages, which are correctly assigned to my own user account. The messages with the race condition, as mentioned above, have been invisible to me.
After joining to the new right group again:
$ sudo usermod -d G martin systemd-journal
I also see the syslog messaes just before exiting the process again :-).

Problems with a Business Object when using data RAW.

Hi,
I've created a Z bapi with parameter tables as
FILE_BIN like SDOKCNTBIN
The structure SDOKCNTBIN has one RAW field.
When I go to SWO1 and implement a new Bapi, the following error occurs:
"Field SDOKCNTBIN -LINE is too large to be included in container"
Does anyone knows why when I declare an structure with a field RAW, gives that error?
Thanks in advance!

Does this occur when using Immediate Mode?
Here's a blurb from my ADF Toy Store paper about Batch Mode and immediate mode.
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/adftoystore/readme.html#batchmode

Problem with spaces in filenames when using ODI tools

Hi everyone,
has anyone of you ever encountered the following behaviour:
When using any ODI tool related to file manipulation the tool does not work if the file parameter value contains a blank/space. Example:
OdiFileDelete "-DIR=c:temp" "-FILE=Test this.txt" "-RECURSE=NO" "-CASESENS=NO" "-NOFILE_ERROR=YES"
In this case an error will occur saying the file does not exist although it exists in the directory.
Has anyone a workaround for this?
Thanks in advance,
Hauke

Hi Madha,
thanks for the prompt answer.
We decided to rename the files to make the tools work. Definitely not always applicable but in our case it's possible. Any hint why the behaviour is designed like this?
Regards,
Hauke

I have a very specific problem with my iPhone, I could use someone to help me with it.

Recently my iPhone (2g, yes two) froze. The touch screen wasn't responding neither was the sleep button, yet the home button worked fine. I didn't drop it prior to this, I just reached into my pocket, pulled it out to listen to some music and it wasn't responding.
I went home, plugged it into my PC (win7 x64) and restored it through iTunes.
The restoration fixed the unresponsiveness, but now I can only make emergency calls. This can be described most accurately as DFU mode. I say most because I've tried methods to get it out of DFU mode and these methods have failed me.
iTunes recognizes my iPhone simply as "iPhone" no longer "[name]'s iPhone".
Each time I go through the method to leave DFU mode, I am able to select restore when iTunes detects that a device is in DFU mode.
However, this is as far as I can get.
It goes through restoring, and then tries to access the iTunes store on my computer.
Each time it tries to access the store this way (i'm not even sure why it has to) the connection times out and iTunes cannot complete my iTunes store request.
Still my phone remains in DFU mode and, while I can connect to the store on my computer to buy music and such, whenever I click on the iPhone under the devices tab, it tries to access and times out.
This is really frustrating and I'm tempted to just throw my iPhone out the window and get a droid instead.
Apple won't help because the phone is no longer under warranty, so this is really my last resort.
Also, it's not an issue with the SIM card. I have placed the SIM card in one of my friends cheap flip phone (same carrier) and it worked fine, it gave the phone my number and I could make and recieve calls.
I marked the product for iPhone 3G, because apparently with Apple, you don't fix broken devices, you just buy new ones.

First you should check on another Wifi to see if it's your Lion machine.
If it only occurs on your Wifi, then perhaps you have local interference and need to set the router on another channel far from others.
You can install a free program called KisMAC that you set your Driver Preferences to Apple Airport Extreme Passive Mode, enter your Admin password and monitor your local Wifi signals, see if you cna pin point the cause of your interference or meddler.
If your not running WPA2 with AES and a 12 plus random character/letter/number password for both Admin and Internet access use only then you should seriously consider doing so.
http://www.tomshardware.com/reviews/wireless-security-hack,2981-10.html

Problems with some web parts when using XSLT

I have a page on which I have several web parts. Some web parts are custom while others are OOB and only XSLT is applied on them.
I am using 2 WFEs with NLB. Problem is when I do iisreset on one of the WFE then the OOB web parts with XSLT start giving error. You know the standard error "corelation ID....bla bla bla". Anyway the error automatically goes away after a 2, 3 minutes.
So basically if I do iisreset or stop the iis, and then load that page, then all custom web parts load fine except those OOB web parts with XSLT. And then they too start working fine after 2, 3 minutes if I reload page.
What could be the reason for that? Looks like some service on which XSLT depends take time to load!? And once that service is loaded then they start working fine? Or it could be due to distributed cache or something!?

Hi Frank,
Which version of the SharePoint 2010 did you use?
In June 2011 CU code was added to the DataFormWebPart (which is used to display list data) that if an XSLT transform took longer than 5 seconds, a StackOverflowException was thrown. This was done to avoid
a potential Denial Of Service attack on SharePoint if crafted XML could be sent that would continually clog up the XSLT, thereby stopping pages from rendering.
In August 2011 CU the transform "timeout" was reduced from 5 seconds to 1.
So, any list with XSLT that takes longer than 1 second to parse in an XSLT transform goes *boom*.
After you perform an IIS reset , the cache of the page was cleared and you encountered the error. Once the page is cached, there is no error.
You can try to set up XSLT Timeout with the following PS commands:
$farm = Get-SPFarm
$farm.XsltTransformTimeOut = 5
$farm.Update()
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/de-DE/44cfd798-be7a-4436-8786-bd44049e7def/sp2010-column-filter-causing-unable-to-display-web-part-error-and-a-stack-overflow-exception?forum=sharepointgeneralprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Problems with JBO errors displaying when using custom insert VO methods

Hi!
I have a problem I hope I can explain :).
I have a VO that has custom execute and insert methods implemented in application module.
public void executeWithParamsMyViewG(String asID)
    // find the view
    MyViewImpl loMyViewImpl =
      getMyViewG();
    loMyViewImpl.setNamedWhereClauseParam("IDParm", asID);
    // execute the querry
    loMyViewImpl.executeQuery();
public void insertRow(String asID)
    MyViewImpl loMyViewImpl =
      getMyViewG();
    // create new row
    Row loRow = loMyViewImpl.createRow();
    // set fields in new row
    loRow.setAttribute("ID", asID);
    loRow.setAttribute("MyAttribute", "A");
    loRow.setAttribute("MyAttribute2",
                       afContext.getProcessScope().get("MyParm"));
    // insert new row
    loMyViewImpl.insertRow(loRow);
}I have custom error handler with
    public void reportException(DCBindingContainer bc, Exception ex) {
       //Force JboException's reported to the binding layer to avoid
       //printing out the JBO-XXXXX product prefix and code.
      disableAppendCodes(ex);
      super.reportException(bc, ex);
    private void disableAppendCodes(Exception ex) {
      if (ex instanceof JboException) {
        JboException jboEx = (JboException) ex;
       jboEx.setAppendCodes(false);
        Object[] detailExceptions = jboEx.getDetails();
        if ((detailExceptions != null) && (detailExceptions.length > 0)) {
          for (int z = 0, numEx = detailExceptions.length; z < numEx; z++) {
            disableAppendCodes((Exception) detailExceptions[z]);
    }I also have custom phase listener and page lifecycle but without any 'important' methods overridden.
Than I have a jspx with af:processChoiceBar for navigation, Create button binded to insertRow method, commit and rollback buttons and form with input fields. One of them is required, but with validation on server side, not on client side (showRequired instead of required).
My problem is this:
If I add an empty row, leave all the fields blank and try to commit I get required field message, which is OK. But if I use af:processChoiceBar (previous page, next page, select any of the pages), the message is not displayed. The message is displayed after when I try to return to this page. If I debug the exception in reportException method has the code 27024 for DeferredRowValidationException, not the required attribute error which is displayed.
Can anyone help me with this please, I've wasted a lot of time on this now.
Regards!
BB

Hi,
Does anyone know why this would not be working. It's really irritating!

Problems with cursor and shortcuts when using JNLP services on MAC OS X

After invoking the JNLP services on a MAC I loose the ability to set the cursor and invoke keyboard shortcuts. On Windows this is not a problem, so I believe it is a bug and I have reported it to Apple. Meanwhile, I would appreciate if someone could help me with finding a work-around. To identify the problem run the following code with Java Web Start (i.e., you need to add the program to a jar and launch it using a JNLP script). You also need to include the javax.jnlp package.
Observe that the cursor changes to cross-hairs when entering the circle. After invoking the Open file menu item, the cursor does not change any longer. Shortcut key do not work either, but if you open the menu and close it again without selecting any of the menu items, the shortcuts are OK again.
package bugreport;
import java.awt.*;
import java.awt.event.*;
import java.io.IOException;
import javax.swing.*;
import javax.jnlp.*;
public class Demo2 extends JPanel implements Runnable, MouseMotionListener {
    private int centerX = 100;
    private int centerY = 100;
    private int radius = 50;
    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Demo2());
    public void run() {
        int menuMask = Toolkit.getDefaultToolkit().getMenuShortcutKeyMask();
        final JFrame frame = new JFrame("Bug Demo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setPreferredSize(new Dimension(200, 200));
        addMouseMotionListener(this);
        JMenuBar menuBar = new JMenuBar();
        frame.setJMenuBar(menuBar);
        //File menu
        JMenu fileMenu = new JMenu("File");
        fileMenu.setMnemonic('F');
        menuBar.add(fileMenu);
        //openMenuItem
        JMenuItem openMenuItem = new JMenuItem("Open...");
        openMenuItem.setMnemonic('O');
        openMenuItem.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_O, menuMask));
        openMenuItem.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                openFile();
        fileMenu.add(openMenuItem);
        frame.add(this);
        frame.pack();
        frame.setResizable(false);
        frame.setVisible(true);
    @Override
    public void paintComponent(Graphics g) {
        g.clearRect(0, 0, getWidth(), getHeight());
        g.setColor(Color.BLUE);
        g.fillOval(centerX - radius, centerY - radius, 2 * radius, 2 * radius);
    public void mouseDragged(MouseEvent e) {
    public void mouseMoved(MouseEvent e) {
        int dx = e.getX() - centerX;
        int dy = e.getY() - centerY;
        if (dx * dx + dy * dy < radius * radius) {
            setCursor(Cursor.getPredefinedCursor(Cursor.CROSSHAIR_CURSOR));
        } else {
            setCursor(Cursor.getDefaultCursor());
    private void openFile() {
        FileOpenService fos = null;
        try {
            fos = (FileOpenService) ServiceManager.lookup("javax.jnlp.FileOpenService");
        } catch (UnavailableServiceException ex) {
            JOptionPane.showMessageDialog(this, "Service unavailable", "Open", JOptionPane.ERROR_MESSAGE);
        if (fos != null) {
            try {
                FileContents fc = fos.openFileDialog(null, null);
            } catch (IOException ex) {
                JOptionPane.showMessageDialog(this, "Service unavailable", "Open", JOptionPane.ERROR_MESSAGE);
}Edited by: James_Vagabond on Oct 29, 2009 9:35 AM

Barbara, Thanks very much taking the time to respond to my posting. Your input and directions were just what I needed.I accessed the print settings in the pull down menu, setup the print options including the color profile for Elements and the Printer to sRGB, and printed my picture. This resolved all the invalid color problems I was having, but I did notice that there was a hint of magenta overall in the picture. I had read an article that said to use Canon Color Matching instead of Color Sync to prevent that but I couldn't make that change in the pull down menu. I tried in the Presets dialog box but that didn't appear to be possible. Should I make that change as well?
Also, in my travels through Elements 13 I notice under Edit->Color Settings that there were options for No Color Mgmt, Optimize for Screen, for Printing, or ability to chose one or the other (real time I assume). How do those options fit into this scenario?
Thanks again

HT201210 i have a problem with my iphone 4s when i update the system its giving me error 36 ? and the phone docent want to open! any one please know who to solve this problem

I cant open or upate my iphone 4s because its give me message erorr 36, please any one know what dose it mean erorr 36 and who i solve this problem.

Hi mohamed00,
Thanks for visiting Apple Support Communities.
I recommend following the method below if you are not able to restore your iPhone and see an "error 36:"
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Cheers,
Jeremy

Problem with my iPhone 5 when using my bluetooth Nokia CK-7W

Similar Messages

Maybe you are looking for