Problem with my Iphone5 speaker

Okay how do I start will anyways the other day I gave my son my Iphone to watch Youtube and for some reason I don't know what he did but my speaker is really LOW. My volume is at the MAX and I can't seem to find the problem!! The phone isn't wet or damage, do you think theirs a MYSTERY button that I don't know? Please help =\

Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

  • I have a problem with my iphone5. I don't have signal, but I can check my email, facebook... The operator is identified but I can't call

    I have a problem with my iphone5. I don't have signal, but I can check my email, facebook... The operator is identified but I can't call

    You probably don't need to do that.
    How to Remove MacKeeper or use the Uninstall option in MacKeeper.
    To erase and reinstall:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • I have a problem with the phone speaker

    I started yesterday to have a problem with the phone speaker, I cant hear anything when using the normal speacker, but its ok when using the loud speaker. I dont know what happened. its not working nether with phone calls nor calling apps such as viber

    If you have a docking station try putting it on there.  I lost my sounds, docked it and they came back immediately.

  • HT3042 Please show us the video tutorial for this because i am having so much problem with my iphone5 bluetooth and can not send any file . So plz plz help me

    Please show us the video tutorial for this because i am having so much problem with my iphone5 bluetooth and can not send any file . So plz plz help me

    You have to use airdrop which is on iOS 7

  • Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update

    Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... What should i do. I have now resulted in using another phone as i cannot operate like this...

    Hi i am also having problems with a crackling speaker on calls every few calls. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... I will watch to see what advice you get.

  • There ain't any problem with the iphone5

    There's been lots of talk about the iphone5 battery issues.  I'm one of those unlucky iphone5 owner who got some problems with the batterie.  Some thought it was related to ios6.  I can tell you it has nothing to do with it.  I was concerned about the product quality because of what I was experiencing but I knew it wasn't something that would get out of Apple's control.  They were kind enough to monitor my device and also kind enough to change my phone.  Since I got the new one, I can tell you that my battery issue is forever gone.  I only lost 25% within a period of 11 hours using it normally.  I'm running all features, including LTE,bluetooth, wifi, traffic and so on.  It is performing as well as my iphone4.  So if you have problems with your phone, go back to Apple Store and they will change your device.  I do appreciate Apple!s customer's service and so should you.  As for iOS6, I've upgrated my iphone4, ipad and ipod and there's nothing to worry about.  It's not draining my batteries any faster than iOS5, not at all. 

    Using Apple Hardware Test
    Kelley Computing - Rember
    But it's covered by Apple's warranty - if you ask, they should erase & reinstall OS X then if it still panics without adding any 3rd party software, there has to be some problem with the computer.

  • Has anyone had a problem with no ear-speaker noise when making calls on iPhone 5? Usually work after first call

    So I got my iPhone. Had problems with the screen and took it back for a stock replacement. The replacement I noticed about two weeks later that when I make calls, 80% of the calls wouldn't make a noise. I would then look at the screen and see its been answered and the seconds are counting away. I'd hang up and try again which would always work.
    I've tried a restore. Twice in facts.
    Has anyone else had this problem? I'm running the up to date software but think it could be a hardware problem.

    Thank you so much.  You have solved my problem.  I never thought to click the down arrow.  In all the time I have been printing, on any program, the entire window opened up when I clicked on the print button.  This one never did.  I don't understand why Adobe support never told me about that when I called them.

  • Hi, i have a recent problem with my iphone5s.

    hi,
    i got a bitter experience with my iphone5s now a days. phone's earphone out gone badly, that if i press volume up button, full volume will come and stereo balance was not working, left side having high volume with distortions and right side low. what should i do? 

    Try to reset your device. This won't delete your data stored on the phone.
    Press and hold the Sleep/Wake button
    Press and hold on the Home button
    Keep holding both buttons until the display turns off and back on with Apple logo on it.
    Alternatively, you may go to Settings - General - Reset - Reset All Settings

  • HT204387 I'm having a problem with my iphone5 connecting to the Nike Fuel Band via bluetooth, any quick fixes out there?

    Hello
    I cannot connect my new iphone5 to my Nike Fuel Band ( purchased at the Apple store, so I'm hoping it connects with one of their devices). Does anyone know if there is a fix? I have Bluetooth enabled on the phone. It's just not discovering the other Bluetooth enabled device. I've tried pairing with another portable Bluetooth speaker as well, and that was also not discovered. Of all products, I would have thought Apple had this part down already. A little frustrating.
    Thank you,
    L

    Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
    It sounds like you are connected to the Ethernet LAN port.

  • Problem with mouse and speaker icon

    When I move the curser around a page, a semi transparent speaker icon often shows up with a faint sound then slowly fades out. It sometimes momentarily freezes the screen until the sound icon is gone, as if the system had suddenly run short of memory. What can this be due to ?
    Power Mac G4 Cube   Mac OS X (10.3.9)  

    The cable seems to be fine. Actually I tried the mouse in the other port and in another computer and I have no problem at all.
    I have to plug it in the left side because I am lefty.
    But... the same thing happens with my powerbook (and the MBP). This behavior started after I upgraded to 10.4.5

  • X-Fi digital out problem with FPS 2000 speak

    I just upgraded my old SB Li've! to X-Fi ExtremeMusic.
    I connected my 4. digital FPS 2000 Cambridge Soundwork speakers to the digital i/o port at the back of the sound card, but I could only hear from front speakers. Nothing from the rear speakers.
    Also when I run the speaker connection wizard, after I pick digital output, the program only allows me to select either headphone or 2. speakers even though I connected to my FPS2000 which is 4. speakers.
    Is it because my orginal mini-plug to DIN converter cable from FPS2000 is a 3-pole only and X-Fi digital out port is 4-pole? If that's the case, is it possible to buy a 4-pole mini-plug to DIN converter cable which works for FPS2000?
    Will this cable http://us.creative.com/products/product.asp?category=3&subcategory=58&product=0375 &nav=systemRequirements
    work?

    Actually you are having exactly the same problem as other users with DTT3500 or 5700 speakers. The X-Fi does not support the DIN connection. The digital-out of the X-Fi is the industry standard SPDIF. This means only 2-channels can be sent!
    You should connect your FPS speakers to the analog outs of the soundcard. Quality will be anyway better, as the X-Fi includes modern DACs at 24-bits, which is not the case of the FPS2000 speakers.

  • Problem with audio from speaker at bottom

    I have looked around the net and found several other people have had this issue, but want to know more about possible fixes.
    My iPhone 4 has an issue where the audio from the speaker on the bottom of the phone disappears. Randomly. It could be during a youtube video, or a game, or even just using the phone itself. If I leave the phone for a few minutes and come back to it, when I play a game or video, the audio returns.
    Initially the audio did not come back. And I restored the phone thinking that may help. But it didn't.
    So, has this happened to anyone else? Has anyone got an idea on how to fix this. Volume controls and mute switch all checked. I can't explain how it's happening or how to fix it.
    Any thoughts?

    well an update, im realizing that only one clip out of the 3 clips is where the audio doesnt work.  of course its the main clip with everything i need on it.  when i import the other 2 clips into pp the audio meter icon show on them and audio plays fine.  on the main clip its light purple and no audio meter indicating no audio.  but like i said i can play it fine and hear the audio perfect outside of pp.  all 3 were clips were shot at same time at same settings. TIA

  • Recently I started having this problem with the Iphone5 IO7 software it says " SIM Card is not Installed" while it fixed the problem by repeated turn on and off but comes again on the second day

    I am sure apple must be working on a patch or an io7 update.  I keep on getting this msg while calling and phone does not receive any incoming calls when it displays a msg saying "SIM card is not installed".  I would appreciate if apple try to resolve this software problem asap.  Thanks

    Hi apple954!
    I have an article for you that can help you troubleshoot SIM issues with your iPhone:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • --Static problem with inspire p5800 speaker setup--

    Hi,
    I have recently purchased this speaker system (refurbished) and after hooking it up, I noticed static, a permanent eerie sound that is coming out of the speakers and I dont know how to get rid of this. I have a SB Live card, don't know if it is compatible or not but I get output, its just that the static is present and very annoying. Any suggestions will be appreciated, thanks.

    I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
    EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
    Message Edited by hij on 01-28-2007 02:31 AM

Maybe you are looking for