Problem with my new Docking Station

So it is very weird. I got my Docking Station Yesterday, I have spent like 12 hours talk to different support, which is nice but not actually helping. I download all downloadable updates, tried to install different drives, but it is just not working.
Problem is, first I think my docking station is broken, now I know the DIV port is working just fine, My USB 3.0 and 2.0 only work fine with my WD Portable Hard drives. I am sure about the USB port is not broken. But I can not connect to Ethernet with my
Ethernet cable and also I can not connect my head phone to the Dock... I have tried on another Surface Pro 3 from my friend and it seems work just fine(USB can also connect other devices). I have no idea what is wrong with my surface, seems it is a software
problem but not a hardware problem. Or maybe is it something about the damaged charging port on my Surface Pro?
Guys, what should I do!

I download all downloadable updates, tried to install different drives, but it is just not working.
What is "Drives" do you mean "Drivers"? Please be clear.
I know the DIV port is working just fine
What is a DIV port? Do you mean DVI? The surface Pro 3 does not have a DVI port.
My USB 3.0 and 2.0 only work fine with my WD Portable Hard drives.
Your USB ports on the device, or on the Dock? If your USB ports work on the dock, then what is the problem?
THis post is very odd. At no point to you list what kind of Dock you are actually using, I assume that you have a Surface Pro 3 with the Surface Pro 3 dock, but again, I'm not sure.
First thing to do is to check the Device Connection, and verify that the machine can view each device.
Plug the machine into the dock, and plug your WD Hard disk into the dock.
Open the Device Manager (Devmgmt.msc), and set to "View --> Devices by connection"
Find your WD Hard Disk in the tree, somewhere under ACPI --> PCI --> USB 3.0 Host Controller --> Etc...
then you should be able to un-dock and re-dock, each time you should see the addition/removal of the USB devices, network adapter. IN addition, you should also see the battery icon in the tool bar change to charging, and the video should go in and out on
your display.
If you are not getting any changes, take your dock back and try to get it repaired.
IF you *are* getting these changes, it might be time to review your software/driver problems. If all else fails restore the OS back to factory defaults. If you need further help, call Microsoft Support.
As a side note, "Microsoft Deployment Toolkit" this is not the correct forum for Surface HARdware or Driver problems. It's a forum for people who work in Corporate IT Departments.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

Problem with laptop and docking station

Hello.
We have two laptops with two docking station. Both laptops w/ docking have the same problem:
When the computer is turned off, and its still connected to the docking station, the fan in the computer start to run really fast. The fan goes on for a good while. This is making alot of noise, which can be annoying for the person using the office. When the computer is on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?
1. Product Name and Number
HP ProBook 6460b
Docking Station VB043AA
2. Operating System installed
Windows XP 32-bit
3. Error message
No error message.
4. Any changes made to your system before the issue occurred
No recent changes.
Thanks in advance.
- Betroger
This question was solved.
View Solution.

It is possible the notebook is not completing the shutdown in full when docked.
Make sure the BIOS is the most recent version.
Here is the most recent one to try should you need it.
Other than that, I am afraid I do not have much else for this. I did some research, but I didn't really find anything that was exactly like this. I found scenarios where the fan would run at full speed when docked, but this happened whether the notebook was booted or not. You can try your luck in the business support forums to see if they may have something that is a little more helpful.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

New docking stations Basic, Pro and Ultra Docks

Hi All,
Im new to these forums but wanted to see if any one else had had experience with the new docking stations. I just upgraded to a T440s which needed the new docking station... I had to get two of them for home and work. They are SO hard to put the PC in compared to the old series 3 docks for my old T410s... those things you did not even need to look when you put the PC down.. they just sliped in.. but the new ones, OMG each morning it takes me several tried to get them to dock.. I am thinking I am damaging the PC when I attempt to do this..
That being said, i am still a fan over EVERYTHING lenovo...
Any one else had similar experiences?
Tom

Hi All, I just received my T440s along with the new Ultra Dock. I have the T440s in the dock and connected to my TV used as monitor using HDMI cable. I hit f7 and can do "PC screen/extend/duplicate/2nd screen only, no problem. I chose the 2nd screen only for my work. Then I finished work and close the lid but when I come back to restart the laptop, I can only see the display on the laptop and no matter how I toggle using f7, I cannot display anything on my TV. The only way I can get back on track (2nd screen only mode) is to un-dock my laptop and hit f7 again. I never experienced this with my T410 using the older dock. Please help.

TS2634 After I updated my iPod touch with iOS6, it does not work with my Logitech docking station. Is this a problem with iOS6?

Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware.

Does the new IPOD Nano connect with the bose docking stations?

Does the new IPOD NANO connect with the Bose docking stations?

hi
Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

There is a hum when I hook up my IPod touch with the stereo system. If I do not use the docking station there is no hum. Is there a solution other than buying a new docking station. The on I own is 5 years old and is an apple product.

I have an Ipod touch with a genuine Apple docking station. Lately when I connect my system to my home stereo, there is a hum that I never noticed before. When I connect the system directly to my stereo, there is no hum. Is there a solution, other than buying a new docking station?

This makes sense to me. I think the issue is your misunderstanding. If you purchased an item, your Apple ID becomes tied to that permanently. So when you try to update that app, you need the password to the ID that 'OWNS' that application.
Also, I suspect you have a different ID signed into the device, which is why you can't buy with your own. That article listed shows how to change the signed in account.
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311

Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

My ipod touch won't play on the new docking station I got.

My ipod touch won't play via the new docking station I got for xmas. Wors with a 3.5mm connector but not on the ipod connection itself. Seems like other ipods and iphones work on it but not mine. what can I do to fix this?

- Does your iPOd have iOS 5 and do the other devise have an earlier version?
- Some users have reported that some docks no longer worked after updating to iOS 5/5.0.1
- What the dock maunufacturer's support site say about compatibility wth your model iPod and iOS?

Headaches with my new base station.

My new Airport Extreme 802.11N is being very strange. I need help. I've wasted 6 hours on it!!:)
To start with. My ISP requires a pppoe connection. So, with the new base station I plugged directly into the wan port from there access point (a poe injector that goes to the wireless antenna)
I set up the PPPOE settings through the automated wizard and have it on share a single IP address. It connects to the server and the time box comes up in my menu bar with how long it has been connected. Try going somewhere and it just says connecting and never goes anywhere. Any suggestions?
At this time the airport is in bridge mode, I can log in and internet works fine. LAN works fine. Problem. Only one computer at a time can log directly online. I need everyone connected.
I really need some help!! I would think that if it works in bridge mode. I should theoretically be able to then switch that to share the connection and everyone could use it? I'm stumped:(

I am here for the very same reason! We have spent way too much time on this thing!
I had it backing up yesterday and now Time Machine says it has nowhere to back up and wont configure the settings!
I am way beyond frustrated.

Sound Problems With Brand New 24" iMac!

1) My new iMac has suddenly stopped making alert sounds, such as for incoming Mail, no Mail etc.
2) I cannot listen to any radio stations on iTunes any more - dead!
Is there a problem with the new iMacs and sound?

All of my other sounds (startup, iTunes purchased music etc.) worked fine. All of my preferences are set OK.
Here's the odd thing: All of a sudden my alert sounds have come back and I can play SOME radio stations through iTunes, but not all.
This is very strange!

HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Natan turbo hadar,
I have the same exact problem.
I put an iPod shuffle on the Bose system, it plays just fine.
My iPhone 4s works just fine connected to my car stereo.
My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
So it's not the Bose, it's not connections, it's the iOS 7.1.1
Everything worked fine before, any one else have suggestions?

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problems with the new Pages.

Hi everyone.
I wonder if i am the only one experiencing a little problem with the new Pages?
My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
Anyone else tried this?
Martin.

VladRO wrote:
These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
Instead of starting a new list, go to
https://discussions.apple.com/thread/5468056?tstart=0

Problems with the new iPad and Joikuspot premium after iOS 6

Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
Vittorio

Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5

Problem with my new Docking Station

Similar Messages

Maybe you are looking for