Problem with my old 8700f

I found my 8700f with an egg timer revolving on the screen. This disappeared and the red led came on. It then returned to the egg timer. This cycle just repeats itself.
I cant even turn the phone off.
Any ideas?

First think, do a simple reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
If the device does not reboot properly, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC.mit with my Mac i get that error.

Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.

What type of headphones were you using? I have a set of Microssft headsets, with the built-in mic and connected via USB, and have no problems.
Clinton

I recently upgraded from an 80 to 160GB Classic but only some of the artwork in iTunes is synching. There was no problem with the old 80Gb classic. any suggestions?

I recently upgraded from an 80 to 160GB Classic but only some of the artwork in iTunes is synching. There was no problem with the old 80Gb classic. any suggestions?

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

After ugrading to Firefox 4, I can not go to my job e-mail website. I get the message: ssl_error_renegotiation_not_allowed. No problem with the old version of Firefox. Can I have the old version of Firefox back?

After ugrading to Firefox 4, I can't go to my job e-mail website. I get the message: ssl_error_renegotiation_not_allowed. No problem with the old version of Firefox. Can I have the old version of Firefox back?

See:
*https://wiki.mozilla.org/Security:Renegotiation

I have a new IPhone5c and do not receive texts or calls from my daughter's phone. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot?

I have a new IPhone5c and do not receive texts or calls sent from my daughter's phone; I'll call this phone 2. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot? My other daughter has a new IPhone5c too. She receives calls and texts from sent from phone 2. Any tips for remedying this problem?
Thank you.

Turn off iMessage in your phones settings. Apple devices can only use iMessage to other Apple devices.
Turning off iMessage will allow the messages to go as regular text messages.

I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer

Hi
I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer. Any suggestions.

? Anyone have any suggestions?

Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it

Using a Huawei datacard. Didnt have problems with my old Macbook. My new MacBook Pro sometimes does not recognise it and Message flashes "Device disconnected or not available

Hi
Hope you found a solution by now.
I reply because others might encounter the same problem.
Mine was the one described here:
https://discussions.apple.com/thread/2656776?start=0&tstart=0
I also installed the latest version ov Mobile Partner (16.x)
Cheers,
Nick

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Problems with my old iMac 500MHz with 128MB of RAM

Ok guys...
Lucky for me I have a brand new intel pro duo iMac.. but I still have the urge to fix (or at least try to fix) my old mac.
Its an iMac 500MHz with 128MB of RAM running OSX 10.2.8 and its giving me tons of problems...
But theres one problem thats bugging me the most! For whatever reason I can't click and drag files! You'd think it would be the mouse... but the thing is that it registers a hold down click cause I can make a highlight box on the desktop, highlight text, ect.
Is there some known "you can drag files" problem with OSX? It doesnt sound like that big of a deal.. but it ***** when I cant drag files in or out of the trash... put apps in the application folder... ect.
Can anyone help me?
iMac 500MHz with 128MB of RAM Mac OS X (10.4.7)

Hello Vaseline,
Welcome to the discussions area. My first thought is that with your ram at 128 you are just about at minimum.. I would definately up the ram.
Secondly....look at this link and see the advice given by others. Go to the advice of dale which will lead to Dr Smokes link and follow his instructions
http://discussions.apple.com/thread.jspa?messageID=1481217&#1481217
This may not be an exact solution but will help you get started....Good Luck with this problem and the new Mac.................Jim

Hi I had problems with an old core disk 07.08 disk and stuff .

I used a CD core iso from 07 to install Arch and now my pacman breaks I get some sort of problem where Rc.conf gets erased I wish I knew what to do. I could try to explain a little better but it's complicated. Has anybody had any problems with one of the old core disks?

Tay85
1. Computer Clean Up/Optimization
Go to Documents/Adobe/Premiere Elements/7.0 and clean out the Adobe Premiere Elements Previews File Folder. Do the same for the Media Cache Folder in that location.
Go to Edit Menu/Preferences/Media and hit the Clean button in
Media Cache Database area.
Then go to Edit Menu/Preferences/Scratch Disks, determine where all the Scratch Disks are directed to and how much free space is at that location.
Let us know the results.
2. Depending on the results, we next may do
a. Deletion of Adobe Premiere Elements Pref file or the whole folder in which it exists...path in Windows 7, 8, and 8.1 64 bit...
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements 7
7.0
and in the 7.0 Folder is the Adobe Premiere Elements Pref file that you delete. Make sure that you are working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path. If that does not resolve the issue, then delete the whole 7.0 Folder in which the Adobe Premiere Elements Prefs file exists.
b. if "a" does not work then....
uninstall, ccleaner (regular cleaner and registry cleaner components), and then reinstall.
http://www.piriform.com/ccleaner
3. Always make sure that you have the latest version of QuickTime installed on your computer and that you are running the program as Run As Adminstrator or from a User Account With Administrative Privileges.
We will be watching for your results.
Thank you.
ATR

Weird problem with capturing old 8mm tapes with my hi8 camera

ok, so i'm trying to capture an old 8mm tape from like 1995 i think, and when i capture nothing shows up. this might be a problem with the tape though because it won't even play on the camera. however, the weird thing is that when i push fastforward while it plays a very fuzzy image shows up of whats on the tape, but then when i play it in real time again it just shows blue screen. This is happening consistently with a few other tapes from the same time. Is this happening because the tapes are shot? or is there something i'm not doing right?

Are they tapes you shot? Could they be PAL? Sometime PAL or a tape recorded in a non-standard speed will only show up fuzzy in FF. Not sure if 8mm had an LP speed and whether all Hi-8 camcorders will play that back.

Problems with Cloning Old SSD to new SSD on i7 MBP

Alright, I'll try to be as brief as possible.
I recently transferred or am in the process of transferring my old info from a Mac Pro Tower to a new 2.8 i7 MBP. Previously, I had a 40GB SSD drive with my OS and Apps and it ran perfectly fine, however I needed more space. I ended up buying a Crucial M4 128GB SSD and upgraded the RAM to 16GB and have since had problems with the Crucial. I just now updated the firmware but that didn't seem to fix a thing.
So what I've done is initialized the M4 SSD w/ Disk Utility via Mac OS Extended (Journaled) and I've done a clone using Time Machine (it worked but it was really slow and would occasionally lag for 30 seconds out of nowhere with a beach ball) and I've also done a clone using Carbon Copy and that was ridiculously slow (I would get a beach ball every 5-10 seconds and just opening a new window in the finder would cause a beach ball).
I don't know what could be the problem. I've since made a bootable SD card with both Leopard and Lion, thinking I'd just install a brand new OS onto the new SSD, but those aren't working for some reason.
So yes, I'm currently using the previous and well-working 40GB SSD, but I'm lost and would appreciate anyone's help!
Thanks in advance!

Csound1 wrote:
Shootist007 wrote:
Csound1 wrote:
Shootist007 wrote:
On NEW Macbook Pro's to boot from the Online Recovery HD system you hold down Command+Option+r.
I believe that it is cmd-r, no option key.
On new MBPs, late 2011 models (At least on mine) to access the Online recovery system you have to hold down Command+Option+r. Of course this was with Lion installed and a real Lion Recovery HD partition on the hard drive.
I can't find documentation anywhere for that, and my 2011 iMac goes to recovery using cmd-r and ignores cmd-opt-r, may I ask you to post the documentation?
Right there is none. As stated on my Late 2011 MBP 15" with hard drive installed with Lion and recovery HD partition in place to boot from the Online recovery system I must hold down Command+Option+r.
Now if I had no recovery HD partition maybe Command+r would work. I don't remember if I tried that, although I think I have and as far as I can recall it is the same.
This has been covered before with others doing tests and IIRC all others with NEW MBPs need to hold down those 3 key to access the online system. Note that this is on NEW, late 2011, MBPs. Not sure about early 2011 models or late 2010 models with the updated firmware.
In any event holding down those 3 keys if the other command, Command+r, doesn't work won't cause any harm to the computer. It's not like the computer will self destruct if you hold down those keys.
On the same Mac to boot the Online Apple Hardware Test, which is normally holding down the d key, I have to hold Option+d. There's no documentation on that either.

Problems with an old version of Lookout

Greetings, I have a client with an application of Lookout v4.01 with data acquisition Profibus. Their computers are many problems to be old. They could tell me what steps to follow for getting the application in a new computer with an updated version of Lookout. Thanks for everything

Here is what I would do.
First: Lots of backups.
Second: Bring into Lookout 5.1 (verify functionality)
Third: Bring into latest Lookout you have licensed (verify functionality)
Others may have more experience.
Best of luck,
Mike
Forshock - Consult.Develop.Solve.

Sync problems with my old iPod

I have an older iPod. I physically sync it with my MacBook Calendar through iTunes because it is a version that is too old to automatically sync with iCloud. I have iCloud on my MacBook and the iCloud calendar shows up when I have it clicked. However, my iPod will only sync the appointments that are in the iCal calendar and will not sync with any of the iCloud calendar appointments. How do I get the iCal calendar to sync with iCloud calendar? This has to be done so that I can sync with my old iPod.

- So you tried everthing here:
iOS: Device not recognized in iTunes for Windows
- Does it charge?
- Have you tried another cable?
- Try a known good compuuter.
- Reset the iPod, nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store.

Problem with my old 8700f

Similar Messages

Maybe you are looking for