Problem with my photostream

My photostream on iphoto will not cooperate with my iPhone.
iPhoto import pictures that I've taken with the camera and load it into photostream instead of my mobile pictures. How can I stop it?

try asking with more details - I am not clear on your question
Is it a problem on iPhoto? Or on your iPhone? What exactly is the problem? See this article for FAQs and trouble shooting hints - http://www.apple.com/support/icloud/photo-stream/
Do you by chance have the iPhoto preference to automatically upload new hphotos to PhotoStream checked? If that is not what you want then uncheck that preference
LN

Similar Messages

I have a problem with icloud photostream. It seemed to lock up some functions in Photos

After I downloaded icloud control panel and turned on photostream everything worked very well except that there were 599 photos loaded into a new file folder "My Photos"
Ever since then there is the little spinning circle on the screen. I also have lost several functions in Photos. I can not delete "My Photos" folder or anything in it
I have tried everything I can think of including a system reset.
I need some help with this one!
Thanks,
Bill

No one can or will help you
This is
Find My iPhone Activation Lock - Apple Support
It is a very successful anti theft device
The only way to activate the iPhone is for the Owner whose Apple id is still on the iPhone to release it ,an easy task if you can find them
There is no other way Activation lock cannot be broken and Apple will not assist you

Problem with Photostream on a PC with VISTA

Problem with Photostream on a PC with VISTA
I have latest Vista SP installed. I installed the download for ICloud for Vista Control Panel. I followed Apple's instructions and am unable when I snap a picture to have it downloaded on my PC to the default directories.
I have done a iCloud backup a couple of times.
I have changed the directory destinations, turned off my firewall, and still not getting the pics on my PC.
Help is appreciated. Thanks..

Well, the problem has been partially solved. When using the free Camera Plus app, all works as it should. All pics that I take download successfully.
Does this mean that the the Apple Camera app is defective?
How do you fix this app, cannot be deleted on the IPOD.

I have problems with new photos for photostream.

I have a problem with upload of new photos to a stream I have made in iCloud.
I made this stream last friday and had no problem. But today when i tried to upload new pictures i got a problem.
When I'm in the photostream and i choose to add new photo, I'm able to choose the picture, but after this it freeze/lock and I don't get the possibility to publish the picture or do anything else.
I'm working on an iPad2.
Please - what to do?

Try this:
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app
then
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
Skip

I am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
   My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
   2014-11-13 QuickLookSatellite crash x2
   2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
   Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
   Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
   Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
   Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
   Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
   Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
   Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
   Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
   Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
   Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
   Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
   Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
   Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
   Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
   Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
   Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
   Dec 1 20:08:30 jnl: disk3s2: journal replay done.
   Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
   Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
   Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
   Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
   Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
   com.cisco.kext.acsock (1.1.0)
   com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
   com.cisco.anyconnect.vpnagentd
   com.oracle.java.JavaUpdateHelper
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.wdc.WDSmartWareService
   com.oracle.java.Helper-Tool
   com.adobe.fpsaud
   com.wdc.SmartwareDriveService
Agents
   com.adobe.AdobeCreativeCloud
   com.zimbra.desktop
   com.citrix.ServiceRecords
   com.google.keystone.system.agent
   com.apple.photostream-agent
   com.genieo.completer.download
   com.genieo.completer.update
   com.cisco.anyconnect.gui
   com.citrix.ReceiverHelper
   com.citrix.AuthManager_Mac
   com.citrix.FMDAgent.14800.UUID
   com.oracle.java.Java-Updater
   com.fiplab.MailTabProHelper
   com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
   com.citrixonline.GoToMeeting.G2MUpdate
   com.apple.AirPortBaseStationAgent
   com.microsoft.SyncServicesAgent
Startup items
   /System/Library/StartupItems/ciscod/ciscod
   /System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
   /System/Library/Extensions/hp_fax_io.kext
   - com.hp.kext.hp-fax-io
   /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
   - com.hp.print.hpio.Inkjet1.kext
   /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
   - com.hp.print.hpio.Inkjet4.kext
   /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
   - com.hp.print.hpio.inkjet8.kext
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/WD1394_64_109HPDriver.kext
   - com.wdc.driver.1394.64.10.9
   /System/Library/Extensions/WDUSB_64_109HPDriver.kext
   - com.wdc.driver.USB.64.10.9
   /Library/Extensions/hp_io_printerclassdriver_enabler.kext
   - com.hp.hpio.hp-io-printerclassdriver-enabler
   /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
   - com.AdobeAAMDetectLib.AdobeAAMDetect
   /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
   - com.citrix.citrixicaclientplugIn
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/npg.plugin
   - npg.graphon.com
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/Internet Plug-Ins/SlingPlayer.plugin
   - com.slingmedia.slingplayer.plugin.nspapi
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/FMDSysPrefPane.prefPane
   - Citrix.FMDSysPrefPane
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
   - com.westerndigital.quickview.prefpanel
   /Library/PreferencePanes/Zimbra.prefPane
   - com.zimbra.prefpanel
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
   - com.citrixonline.mac.WebDeploymentPlugin
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
   - com.Google.GoogleEarthPlugin.plugin
   Library/Internet Plug-Ins/WebEx.plugin
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx64.plugin
   - com.cisco_webex.plugin.gpc64
dylibs
   /usr/lib/libaudioc.dylib
   /usr/lib/libclipc.dylib
   /usr/lib/libcs.dylib
   /usr/lib/libdc.dylib
   /usr/lib/libfilec.dylib
   /usr/lib/libMonoPosixHelper.dylib
   /usr/lib/libpbr.dylib
   /usr/lib/libprintc.dylib
   /usr/lib/libsc.dylib
   /usr/lib/libSFFileMonitor.32.dylib
   /usr/lib/libSFIPC.32.dylib
   /usr/lib/libSFIPC.I.dylib
   /usr/lib/libSFsqlite3.7.4.dylib
   /usr/lib/libSFSyncEngine.I.dylib
   /usr/lib/libupc.dylib
App extensions
   it.bloop.airmail.beta10.Airmail-Today-Beta
   it.bloop.airmail.beta10.Airmail-Composer-Beta
   com.wunderkinder.wunderlistdesktop.sharingextension
   com.wunderkinder.wunderlistdesktop.todayextension
   com.readitlater.PocketMac.AddToPocketShareExtension
   com.stylemac.instadesk.Photodesk-Feed
   it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
   /Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/opt/cisco/anyconnect/gui_keepalive</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.cisco.anyconnect.gui</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>open</string>
    <string>--wait-apps</string>
    <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>9</integer>
    <key>Minute</key>
    <integer>57</integer>
    <key>Weekday</key>
    <integer>3</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
   http://www.apple.com/DTDs/PropertyList-1.0.dtd >
   <plist version="1.0">
   <dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.vpnagentd</string>
        <key>ProgramArguments</key>
        <array>
             <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
             <string>-execv_instance</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>EnableTransactions</key>
        <false/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.SmartwareDriveService</string>
    <key>Program</key>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.WDSmartWareService</string>
   
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.download</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>download</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Downloads</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.update</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>update</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>StartInterval</key>
    <integer>86400</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.microsoft.SyncServicesAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
           <key>Label</key>
           <string>com.zimbra.desktop</string>
           <key>ProgramArguments</key>
           <array>
                   <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                   <string>start</string>
                   <string>-w</string>
           </array>

Deleting photos in photo stream.....i,m always following the instructions on my pc to delete photos in the icloud, but there is coming always a message-there is problem with the server....this result i saw some few days!!

I want to delete photos in the icloud from my pc and i,m following and understand the instructiones from your system, but in every time i must read a message - there is a problem with the server connection.
What is the solution or when will be solved the problem?
Best regards
Tunk2412

Dear Carolyn,
thx xo much for your support, but the problem is not solved.
Thx so much to sent me the instruction comments for the customer support, but there is always coming a message......
"You cannot reset the photostream, because there is a problem with the server connection. Please try again later."
This message is coming since 4 days.
It will be very helpful, to get a message, when Apple will be solved the problem.
Thx so much.
Best regards
Tunk2412

ICloud not syncing and Contact problems with merging duplicates

I was having problems with the syncing of my notes app. When I got the iphone 5 I had since using Mountain Lion I had started to make use of the fact that the notes sync across iCloud. Great. Although not for long. Everything was going fine notes were syncing across devices but then spontaneously they stopped syncing for no apparent reason. I then went to look in settings, looked online and all through discussion forums. Switching notes on and off on icloud both on the macbook and on my iphone. Restarting devices etc etc. iCloud itself online was not able to access the notes app. I kept getting error messages that I would submit to apple. Then I finally relqinquished and unhooked the iCloud accounts from the computer and phone. And at the sacrifice of losing albums in my photostream they sprung back to syncing.
Then the real problem happened. I had selected to keep a copy of my address book in contacts when I unhooked my computer just in case. When everything linked back up again, I then had duplicates in my address book. Not 1 (this can happen just having icloud active) but 5 sets of duplicates, granted I had kept a version from when I unhooked. So I looked around again for how I could quickly and easily get rid of duplicates. Following suggestions online I go into contacts>cards>look for duplicates. I had 1200 or somthing duplicates, so naturally when given the option "would you like to merge the info in these duplicates I click yes. The MacBook starts to chugg away. Its gonna take a while. So I come back later. And before returning to CONTACTS, go to send a message from MESSAGES and I notice that 80% of the threads have no name. I go back to CONTACTS and WHAM 100s of contacts disappeared in the merge never to be retrieived again. You cant restore CONTACTS from Time Machine as it is just mirrors the contacts that you have in present time. Restoring phone doesn't work becasue it just downloads from iCloud after it has restored. TOTALLY RIDICULOUS. I am livid.

what I mean is - create a complete new contact on your contacts and select a picture for it from your Mac. Then set it as "make this my card"
Once you have done that - presumably it will sync with iCloud - have a look and the contact should appear on your iPhone too.
On your iPhone go on Settings>Mail,Contacts,Calendar> Under "Contacts: in "My Info" select That new contact you created on your Mac.
Let me know if that works.
-On another note, so what you are saying is, if I take my 15' Macbook Pro in and they have none of the old ones in stock, they just give you a Retina display one! Did you take it to them for the contact issue you were having or something else?

Ios 5 loaded on all but cannot open on the mac with no photostream

cannot change from Mobileme to Icloud. Don't get the screen i'm supposed to see - just Find my phone. Cannot therefore get Photostream on iPhoto.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

TS3989 Problems downloading from photostream

Hi,
I've been having trouble with my photostream: I can see my images on there, but when I try to add them to an album on my device, they appear for a second and then disappear again. It's the same photos that do it on both my iPhone and iPad, and I've tried adding them to a number of different albums and the same thing happens each time. It's about ten photos, with we're added at the same time and from the same device as other images that are working fine.
Anybody else had this problem and been able to sort it out?

Hi Kyle,
Thank you for taking an interest in this. I am not in the DC area, I'm in California (L.A area). I've tried downloading from work, home, and currently from a third location - all with the same result. I can't seem to break ~2.4KB/sec even though the connection I'm using is much faster than that. This only seems to happen when trying to download from NI, other sites work just fine. At the current rate, my file will take 108 hours to download. Any idea what could be causing this? I've checked the boards and nobody else seems to be having this problem other than the user who started this post.
Thanks again for your help! I've also written the webmaster and am awaiting a response.

I have a problem with your purchase from the App Store

I have a problem with your purchase from the App Store
To understand the problem as well as view images on a flow
https://www.icloud.com/photostream/#A7GI9HKK27lHY

You will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.

Microsoft Office 2007 for Windows: Problems with iCloud

I thought I'd share on this topic, which caused me a lot of grief before it was finally resolved. I'm running MS Office 2007 on my PC, under Vista.
Office kept crashing on going to File:Open or Save As - after downloading iCloud Control Panel. I tried uninstalling iCloud and iTunes, without benefit. I also checked for malware, ran Office Repair, re-installed Office etc etc. Finally I re-installed iTunes and iCloud Control Panel, and ran iCloud Control Panel, which I hadn't done the first time. I allowed it to integrate with just about everything, and after that Office was fine! There is now an iCloud icon at the bottom right of the screen, and a Photostream icon in the Office File Open/Save window. Outlook also has an iCloud section in the Toolbar. I had to run iCloud Control Panel for each logon user on my computer.
It appears that simply installing iCloud caused it to do something to Office, but this was incomplete and required that the program needed to be run in order to complete the process. May I suggest that Apple programmers take note?
Nick

Since posting the above, I found that the problem recurred. In desperation I purchased MS Office 2010, assuming it would cope with iCloud. Initially it was fine, but then the same thing happened! I signed out of iCloud, then signed back in and de-selected Outlook, Photostream and Bookmarks. This seems to have fixed the problem for now, but there does seem to be a problem with iCloud and Office.

Hello. I have a problem with the iphone. I had the misfortune of Smader it for a half years ago. but now all my pictures away. and I think it is a security various measures. what should I do?

hello. I have a problem with the iphone. I had the misfortune of Smader it for a half years ago. but now all my pictures away. and I think it is a security various measures. what should I do?

ckuan wrote:
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
(Here's that part I'm bolding for you to reference): Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
Exactly. It keeps a collection of the most recent 1000 photos in your Photostream Album on your iOS device. That's the limit of the displayed images on an iOS device. Not the upper limit of storage. It's like the call history. You can have more than 100 calls, but only the most recent 100 calls show on the device. You can still get your entire call history from your wireless carrier. And you can still download all of your Photostream photos from Photostream using iCloud Control panel on a PC, or the iCloud option in System Preferences on a Mac.
iCloud: My Photo Stream and iCloud Photo Sharing limits
http://support.apple.com/kb/HT4858
http://help.apple.com/icloud/#/mmc0cd7e99
My Photo Stream upload limits
The My Photo Stream limits below are established based on anticipated upload patterns. Currently, My Photo Stream upload limits are as follows:
Uploads to My Photo Stream per hour: 1000 photos
Uploads to My Photo Stream per day: 10,000 photos
Uploads to My Photo Stream per month: 25,000 photos
If you exceed one of these limits, your uploads to My Photo Stream will be paused temporarily and you may see a notification message on your device. Your uploads will resume automatically after you no longer exceed one of the limits, such as in the following hour or on the following day.
You can upload 10,000 photos in a single DAY.

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

Problem with my photostream

Similar Messages

Maybe you are looking for