Problem with my s-ata raid

hi
my problem is that i bought a s-ata disk, plugged it in, and used it for a while. after a couple of months with just one, i got another one, and plugged it in. the problem lies in that i dont get proper raid. i have set it to striping, but i have found out that i need to remove the boot blocks on both disks, and all backups of the boot as well, in order to get them to work. basically, im looking at a low level format of my whole harddrives.
i need a program that will work for that...
i have a KT4-ULTRA FISR mobo, and two(duh) 120gb s-ata disks from seagate, of this kind.
hope someone can help...
oh, and one more thing. the seatools program wont cut it, so dont even bother posting it...
i thank ye in advance!!!

u know the mobo
AMD Athlon XP 2200+
Apacer pc3200 512MB memory module, CL3
one extra HDD, IBM 80GB deskstar
MSI Geforce 4 ti 4600
Creative Soundblaster Audigy 2 ZS Platinum Pro
Enermax whisper psu, with 32a 3,3v/32a 5v/17a 12v
my rig is watercooled on cpu, chipset and gpu.
that and the two s-ata drives is about it. i do have an extra memory chip lying around, a crucial 512MB CL3 PC3200, but it isnt plugged in.

Similar Messages

  • Great problems with K7N2G-ILSR onboard raid controller

    I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
    Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
    Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
    Now my raid controller seems to be dead again cause it doesnt say a word again.
    Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

    I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

  • Problem with Fax and ATA

    Hi,
    i do not have problem to send Fax to the PSTN, but when I try to receive a fax on the fax machine in port1 of the ATA, the machine never give fax signal.

    Hi Leonardo,
    Have a look at the following;
    Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP) (2.15.ms, Rev B0)
    Configuring and Debugging Fax Services
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d1e.html#1016012
    Configuring and Troubleshooting the Cisco ATA 186 with Fax
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml
    Configure Fax Detection Method on the Cisco ATA 186
    Use a web browser and go to http:///dev (for example, http://172.16.104.117/dev) in order to configure the Cisco ATA 186 using the web interface.
    You must configure these parameters in order to configure the Cisco ATA 186.
    Audio Mode
    bit 2 (18)=0 Enable detection of FAX CED (answer) tone and switch to FAX mode for the rest of the call if the tone is detected.
    Hope this helps!
    Rob

  • Problem with X58A-GD65 and RAID 0.

    It was possible to create high-grade RAID 0 (it is possible to install OS), only at connection HDD in plugs of different conjugate boottrees SATA on a board - for example:
    1-3, 2-4, 5-1, 6-4.
    If to be connected to plugs 1-2, 3-4, 5-6 RAID the array forms, fitter OS it sees as RAID, but OS isn't installed already at a stage of a choice of section for instal ?

    Actually the question in that is such strange connection HDD is: is conceived MSI, Intel or defect of a motherboard?

  • Problems with Xserve RAID

    I have been having problems with Xserve RAID, which happened in a close time span, but may not be related. The Xserve RAID is set up with 7 disks with RAID 5, totaling to 1.3TB in storage capacity.
    First, the first disk failed and the RAID system was degraded. Since I got a very similar 250GB harddisk (but without "Apple Firmware") I tried putting it as a replacement. It was recognized but it became a hot spare disk, even though I did not set the system to use hot spare.
    Later Mac OS X reported that the Xserve RAID's 1.3TB volume was unmounted. I check with Disk Utility, and it reported a lot of errors. I ended up with about 70GB of files in lost+found, and I confirmed that many files were missing. Disk Utility could not really fixed it.
    I put back the failed disk, and Xserve RAID successfully rebuilt the array. I did "Background Array Conditioning" to perform surface scan and mapping of bad blocks. It completed without error. I then did "Verify Parity Data", and it completed but with error, as follows:
    Event:
    Disk 5 Reported An Error. COMMAND:0x37 ERROR:0x64 STATUS:0x81 LBA:0x119E6880
    Description:
    The drive reported ATA error. This is a failure in the communication from the RAID Controller to the drive.
    Any idea what is happening with this Xserve RAID? Bad disk? Bad controller? Or what? Any help is appreciated.
    Thanks,
    Xserve RAID Dual G5 2.0GHz   Mac OS X (10.3.9)  

    After reading here and there on the net (including this forum), yes I realized that the "Apple Firmware" thing may be significant after all. But since I set the Xserve RAID to use RAID 5, a failure of one disk should not affect data integrity. And surface scan was successful, implyingthat all disks are now free from defects. So why did it lost 70GB worth of data? I experienced disk hardware failure often with Windows system but never experienced losing data while the hardware seems to be fine. Without knowing why this happened, I feel scared to put data on Xserve RAID, and this is ironic since this 1.7TB Xserve RAID is meant for storing data safely...

  • Problems with Nforce4 install - audio/ethernet/raid

    Just installed my Neo4 Platinum Nforce4 with XP Home SP2. I have a problem with the drivers. I went to the Nvidia site and download both the Unified Drivers and the standalone Kit for XP.
    The unified driver set didn't seem to do anything at all, it seemed to quit half way through the install without giving me any finished message. A quick look in device manager and I saw about seven items with yellow warnings!
    I then tried the standalone kit which worked better, however after the install I am still left with 3 items in device manager that are giving me warnings. Multimedia Audio Controller, Ethernet Controll & Serial ATA RAID controller. I have no audio at all, I just the BIOS is all is OK, as it is for everything else. In the sound section of control panel there is no audio hardware available.
    Can anyone help please? I dunno what I could have done wrong. It's a fresh install.

    I have now done eveything you've said. I installed the Nforce drivers off the CD, and then installed Realtek, Ethernet & RAID via Live update. I also tried to do the NVMixer & Nvidia Audio install install. I installed  realtek from the add/remove software menu. I then went into add new hardware and did manual install, show all hardware, have disk. Then I browsed to the Nvidia Audio codec folder on my desktop that I download. I was given an option of two drivers "nvmcp" & "nvmpu". I picked the first and ended up choosed "Nvidia audio codec interface" which then installed. It then appeared in device manager. However, when I clicked the audio panel in control panel I still get no audio device installed? I then tried to install NVMixer and when I try to run the application I get this message:
    "the application cannot start because it could not detect any NVIDIA Nforce hardware on your system...."
    What am I doing wrong? When I did the driver install there were two things listed in each driver "nvidia audio codec interface" and also "nvidia audio processing unit", which should I be choosing? Even if I try and installed the "MVP audio processing unit" I'll get a code(10) device cannot start in device manager. This is kinda confusing.
    I also wondered about the RAID controller software. The silicon image drivers that came on the MSI seem horrible, they installed Java too. Is there any way to disable this controller? In the BIOS I can only see one option to enable RAID and when this is enabled device mananger will show an error on an "unknown device". I assume this is the NVRaid? and speaking of NVraid which is mentioned in big fat type on the back of the MSI box, so far I've seen or heard none of it during this installtion?

  • Problem with failing ata link

    Hello,
    I might be in the wrong section, but I got a serious issue I can´t track down!
    Lets start with the symptoms:
    on BIOS-HW-initialisation I get randomly a S.M.A.R.T. error for my root-HD (if the error occurs ARCH won´t boot, but WIN7 does from the same drive without any problems!)
    if ARCH start usually everything is fine, but:
    recently, during normal usage of ARCH, my second HD with my home-partition disappeared (still listed on /etc/mtab, but no more in fdisk -l or lsblk)
    I know, that I can´t exclude possible hardware-problems, but since my second HD never showed any problems via S.M.A.R.T. I wouldn´t consider it as origin of the problem.
    Maybe this is due to a problematic ata-chip on my mainboard (ASRock 880g Extreme3)?
    This could maybe explain the errors randomly between both drives.
    As additional information:
    Earlier I experienced problems booting ARCH with some 'frozen ata links' already, which were related to my DVD-drive (at least they disappeared after I plugged it off).
    The errormessages did not point to the DVD-drive, but to my earlier root-HD, which broke after a short lifetime of maybe 1.5 years.
    I don´t know if this could be a mainboard related problem.
    Can those problems affect the sanity of harddrives?
    Then why didn´t WIN7 had any problems at all? (Okay maybe WIN7 simply ignores problems...)
    I used Kubuntu previously of ARCH and sata-related error messages came after the migration to ARCH.
    I would think, that this could lead to a driver/kernel related issue, but to be honest, I am not enough into this matter...
    My search in the WWW didn´t lead to any helping clues...
    So if someone more experienced could give me some advice on interpreting the situation and my syslog I would be very thankful!
    If you need more information, tell me and I will update the post!
    Thanks and greeting!
    Malte
    uname -a: Linux 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012 x86_64 GNU/Linux
    This is the syslog (sda is the data-HD):
    Jul 12 13:12:34 localhost kernel: [ 3620.597956] ata3: hard resetting link
    Jul 12 13:12:35 localhost kernel: [ 3621.082485] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 12 13:12:35 localhost kernel: [ 3621.088099] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    Jul 12 13:12:40 localhost kernel: [ 3626.079118] ata3: hard resetting link
    Jul 12 13:12:40 localhost kernel: [ 3626.565475] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 12 13:12:40 localhost kernel: [ 3626.571103] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    Jul 12 13:12:40 localhost kernel: [ 3626.571122] ata3: limiting SATA link speed to 1.5 Gbps
    Jul 12 13:12:45 localhost kernel: [ 3631.562105] ata3: hard resetting link
    Jul 12 13:12:47 localhost kernel: [ 3633.770658] ata3: SATA link down (SStatus 1 SControl 310)
    Jul 12 13:12:47 localhost kernel: [ 3633.770674] ata3.00: disabled
    Jul 12 13:12:47 localhost kernel: [ 3633.784024] ata3: hard resetting link
    Jul 12 13:12:48 localhost kernel: [ 3634.670054] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 12 13:12:48 localhost kernel: [ 3634.789959] ata3: hard resetting link
    Jul 12 13:12:49 localhost kernel: [ 3635.276308] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 12 13:12:49 localhost kernel: [ 3635.412888] ata3: hard resetting link
    Jul 12 13:12:50 localhost kernel: [ 3635.899221] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 12 13:12:50 localhost kernel: [ 3636.015842] ata3: hard resetting link
    Jul 12 13:12:50 localhost kernel: [ 3636.502157] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 12 13:12:50 localhost kernel: [ 3636.635375] sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
    Jul 12 13:12:50 localhost kernel: [ 3636.635378] sd 2:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
    Jul 12 13:12:50 localhost kernel: [ 3636.635380] Descriptor sense data with sense descriptors (in hex):
    Jul 12 13:12:50 localhost kernel: [ 3636.635382] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Jul 12 13:12:50 localhost kernel: [ 3636.635386] 6f 9a 2a 2f
    Jul 12 13:12:50 localhost kernel: [ 3636.635388] sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0
    Jul 12 13:12:50 localhost kernel: [ 3636.635390] sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 6f 9a 2a 2f 00 01 00 00
    Jul 12 13:12:50 localhost kernel: [ 3636.635418] sd 2:0:0:0: [sda] killing request
    Jul 12 13:12:50 localhost kernel: [ 3636.635429] ata3: EH complete
    Jul 12 13:12:50 localhost kernel: [ 3636.635440] ata3.00: detaching (SCSI 2:0:0:0)
    Jul 12 13:12:50 localhost kernel: [ 3636.635467] sd 2:0:0:0: [sda] Unhandled error code
    Jul 12 13:12:50 localhost kernel: [ 3636.635469] sd 2:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
    Jul 12 13:12:50 localhost kernel: [ 3636.635471] sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 6f 9a 2b 2f 00 01 00 00
    Jul 12 13:12:50 localhost kernel: [ 3636.641628] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    Jul 12 13:12:50 localhost kernel: [ 3636.641659] sd 2:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    Jul 12 13:12:50 localhost kernel: [ 3636.641662] sd 2:0:0:0: [sda] Stopping disk
    Jul 12 13:12:50 localhost kernel: [ 3636.641667] sd 2:0:0:0: [sda] START_STOP FAILED
    Jul 12 13:12:50 localhost kernel: [ 3636.641669] sd 2:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
    fdisk -l (as you can see, only my root-HD sdb is present...)
    [root@rechenknecht ~]# fdisk -l
    Disk /dev/sdb: 500.1 GB, 500107862016 bytes
    255 Köpfe, 63 Sektoren/Spur, 60801 Zylinder, zusammen 976773168 Sektoren
    Einheiten = Sektoren von 1 × 512 = 512 Bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x4e93d8b3
    Gerät boot. Anfang Ende Blöcke Id System
    /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
    /dev/sdb2 206848 102402047 51097600 7 HPFS/NTFS/exFAT
    /dev/sdb3 102402048 800643071 349120512 7 HPFS/NTFS/exFAT
    /dev/sdb4 800643072 976773167 88065048 5 Erweiterte
    /dev/sdb5 * 800643135 801028631 192748+ 83 Linux
    /dev/sdb6 801028695 820524977 9748141+ 82 Linux Swap / Solaris
    /dev/sdb7 820525041 976773167 78124063+ 83 Linux
    cat /etc/mtab (still a mounted sda in mtab?)
    [root@rechenknecht ~]# cat /etc/mtab
    rootfs / rootfs rw 0 0
    proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
    sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
    dev /dev devtmpfs rw,nosuid,relatime,size=4054648k,nr_inodes=1013662,mode=755 0 0
    run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
    /dev/sdb7 / ext4 rw,relatime,data=ordered 0 0
    devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
    tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
    /dev/sdb5 /boot ext4 rw,relatime,data=ordered 0 0
    /dev/sda1 /mnt/daten ext4 rw,relatime,data=ordered 0 0
    binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
    cat /var/log/dmesg.log
    [root@rechenknecht ~]# cat /var/log/dmesg.log
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
    [ 0.000000] Command line: root=/dev/sdb7 ro nomodeset vga=0
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
    [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7ea0000 (usable)
    [ 0.000000] BIOS-e820: 00000000c7ea0000 - 00000000c7eb0000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ee0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c7ee0000 - 00000000c7f00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./880G Extreme3, BIOS P1.70 06/21/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000238000000 aka 9088M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xc7ea0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7ea0000
    [ 0.000000] 0000000000 - 00c0000000 page 1G
    [ 0.000000] 00c0000000 - 00c7e00000 page 2M
    [ 0.000000] 00c7e00000 - 00c7ea0000 page 4k
    [ 0.000000] kernel direct mapping tables up to c7ea0000 @ 1fffd000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
    [ 0.000000] 0100000000 - 0200000000 page 1G
    [ 0.000000] 0200000000 - 0238000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 238000000 @ c7e9e000-c7ea0000
    [ 0.000000] RAMDISK: 37d19000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fa940 00014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 00000000c7ea0000 00044 (v01 062110 RSDT2249 20100621 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000c7ea0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000c7ea0450 07D9F (v01 AS368 AS368164 00000164 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000c7eb0000 00040
    [ 0.000000] ACPI: APIC 00000000c7ea0390 0007C (v01 062110 APIC2249 20100621 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000c7ea0410 0003C (v01 062110 OEMMCFG 20100621 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000c7eb0040 00072 (v01 062110 OEMB2249 20100621 MSFT 00000097)
    [ 0.000000] ACPI: SRAT 00000000c7eaa450 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
    [ 0.000000] ACPI: AAFT 00000000c7eaa540 00027 (v01 062110 OEMAAFT 20100621 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000c7eaa570 00038 (v01 062110 OEMHPET 20100621 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000c7eaa5b0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
    [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
    [ 0.000000] SRAT: Node 0 PXM 0 100000-c8000000
    [ 0.000000] SRAT: Node 0 PXM 0 100000000-238000000
    [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,c8000000) -> [0,c8000000)
    [ 0.000000] NUMA: Node 0 [0,c8000000) + [100000000,238000000) -> [0,238000000)
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000238000000
    [ 0.000000] NODE_DATA [0000000237ffc000 - 0000000237ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00238000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009b
    [ 0.000000] 0: 0x00000100 -> 0x000c7ea0
    [ 0.000000] 0: 0x00100000 -> 0x00238000
    [ 0.000000] On node 0 totalpages: 2096683
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 798432 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19968 pages used for memmap
    [ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
    [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c7ea0000 - 00000000c7eb0000
    [ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ee0000
    [ 0.000000] PM: Registered nosave memory: 00000000c7ee0000 - 00000000c7f00000
    [ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000
    [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s82880 r8192 d23616 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060326
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sdb7 ro nomodeset vga=0
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ bc000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
    [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
    [ 0.000000] Memory: 8109296k/9306112k available (4538k kernel code, 919380k absent, 277436k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:728 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 3422.215 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6847.61 BogoMIPS (lpj=11407383)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000025] Security Framework initialized
    [ 0.000029] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000418] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002612] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003622] Mount-cache hash table entries: 256
    [ 0.003775] Initializing cgroup subsys cpuacct
    [ 0.003777] Initializing cgroup subsys memory
    [ 0.003784] Initializing cgroup subsys devices
    [ 0.003786] Initializing cgroup subsys freezer
    [ 0.003787] Initializing cgroup subsys net_cls
    [ 0.003789] Initializing cgroup subsys blkio
    [ 0.003808] tseg: 0000000000
    [ 0.003818] CPU: Physical Processor ID: 0
    [ 0.003819] CPU: Processor Core ID: 0
    [ 0.003821] mce: CPU supports 6 MCE banks
    [ 0.003825] LVT offset 0 assigned for vector 0xf9
    [ 0.004362] ACPI: Core revision 20120320
    [ 0.007773] ftrace: allocating 17820 entries in 70 pages
    [ 0.014762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.047742] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
    [ 0.153366] Performance Events: AMD PMU driver.
    [ 0.153369] ... version: 0
    [ 0.153370] ... bit width: 48
    [ 0.153371] ... generic registers: 4
    [ 0.153372] ... value mask: 0000ffffffffffff
    [ 0.153373] ... max period: 00007fffffffffff
    [ 0.153374] ... fixed-purpose events: 0
    [ 0.153375] ... event mask: 000000000000000f
    [ 0.173405] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.193370] Booting Node 0, Processors #1
    [ 0.206528] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.216703] #2
    [ 0.229898] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.240014] #3
    [ 0.253215] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.253239] Brought up 4 CPUs
    [ 0.253241] Total of 4 processors activated (27388.45 BogoMIPS).
    [ 0.257652] devtmpfs: initialized
    [ 0.259104] PM: Registering ACPI NVS region [mem 0xc7eb0000-0xc7edffff] (196608 bytes)
    [ 0.259606] NET: Registered protocol family 16
    [ 0.259683] node 0 link 0: io port [1000, ffffff]
    [ 0.259685] TOM: 00000000c8000000 aka 3200M
    [ 0.259687] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    [ 0.259689] node 0 link 0: mmio [a0000, bffff]
    [ 0.259691] node 0 link 0: mmio [c8000000, dfffffff]
    [ 0.259693] node 0 link 0: mmio [e0000000, efffffff] ==> none
    [ 0.259694] node 0 link 0: mmio [f0000000, ffefffff]
    [ 0.259696] TOM2: 0000000238000000 aka 9088M
    [ 0.259697] bus: [00, 07] on node 0 link 0
    [ 0.259699] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.259700] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.259701] bus: 00 index 2 [mem 0xc8000000-0xdfffffff]
    [ 0.259702] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
    [ 0.259704] bus: 00 index 4 [mem 0x238000000-0xfcffffffff]
    [ 0.259748] ACPI: bus type pci registered
    [ 0.259790] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.259792] PCI: not using MMCONFIG
    [ 0.259793] PCI: Using configuration type 1 for base access
    [ 0.259794] PCI: Using configuration type 1 for extended access
    [ 0.260241] bio: create slab <bio-0> at 0
    [ 0.260287] ACPI: Added _OSI(Module Device)
    [ 0.260288] ACPI: Added _OSI(Processor Device)
    [ 0.260289] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.260290] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.260774] ACPI: EC: Look up EC in DSDT
    [ 0.261441] ACPI: Executed 4 blocks of module-level executable AML code
    [ 0.263476] ACPI: Interpreter enabled
    [ 0.263480] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.263496] ACPI: Using IOAPIC for interrupt routing
    [ 0.263622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.264266] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.282569] ACPI: No dock devices found.
    [ 0.282572] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.282625] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.282707] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.282709] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.282710] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.282712] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.282714] pci_root PNP0A03:00: host bridge window [mem 0xc7f00000-0xdfffffff]
    [ 0.282715] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.282737] PCI host bridge to bus 0000:00
    [ 0.282739] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.282740] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.282742] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.282744] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.282745] pci_bus 0000:00: root bus resource [mem 0xc7f00000-0xdfffffff]
    [ 0.282747] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.282756] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
    [ 0.282831] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
    [ 0.282858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.282875] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
    [ 0.282901] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    [ 0.282912] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
    [ 0.282938] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.282993] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
    [ 0.283009] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
    [ 0.283015] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
    [ 0.283022] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
    [ 0.283029] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
    [ 0.283036] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
    [ 0.283043] pci 0000:00:11.0: reg 24: [mem 0xfe5ffc00-0xfe5fffff]
    [ 0.283093] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.283102] pci 0000:00:12.0: reg 10: [mem 0xfe5fe000-0xfe5fefff]
    [ 0.283157] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.283170] pci 0000:00:12.2: reg 10: [mem 0xfe5ff800-0xfe5ff8ff]
    [ 0.283229] pci 0000:00:12.2: supports D1 D2
    [ 0.283230] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.283247] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.283256] pci 0000:00:13.0: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
    [ 0.283308] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.283322] pci 0000:00:13.2: reg 10: [mem 0xfe5ff400-0xfe5ff4ff]
    [ 0.283380] pci 0000:00:13.2: supports D1 D2
    [ 0.283381] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.283398] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.283449] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.283459] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.283466] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.283473] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.283479] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.283486] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
    [ 0.283513] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.283528] pci 0000:00:14.2: reg 10: [mem 0xfe5f4000-0xfe5f7fff 64bit]
    [ 0.283576] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.283587] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.283641] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.283671] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.283681] pci 0000:00:14.5: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
    [ 0.283732] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
    [ 0.283783] pci 0000:00:15.0: supports D1 D2
    [ 0.283804] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    [ 0.283813] pci 0000:00:16.0: reg 10: [mem 0xfe5f3000-0xfe5f3fff]
    [ 0.283864] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    [ 0.283878] pci 0000:00:16.2: reg 10: [mem 0xfe5ff000-0xfe5ff0ff]
    [ 0.283936] pci 0000:00:16.2: supports D1 D2
    [ 0.283937] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.283953] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.283965] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.283974] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.283984] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.283996] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.284069] pci 0000:04:00.0: [1002:6738] type 00 class 0x030000
    [ 0.284082] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.284092] pci 0000:04:00.0: reg 18: [mem 0xfe8e0000-0xfe8fffff 64bit]
    [ 0.284098] pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
    [ 0.284111] pci 0000:04:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
    [ 0.284141] pci 0000:04:00.0: supports D1 D2
    [ 0.284162] pci 0000:04:00.1: [1002:aa88] type 00 class 0x040300
    [ 0.284174] pci 0000:04:00.1: reg 10: [mem 0xfe8bc000-0xfe8bffff 64bit]
    [ 0.284231] pci 0000:04:00.1: supports D1 D2
    [ 0.293145] pci 0000:00:02.0: PCI bridge to [bus 04-04]
    [ 0.293150] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.293152] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe8fffff]
    [ 0.293155] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.293193] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.293208] pci 0000:01:00.0: reg 10: [mem 0xfe6fe000-0xfe6fffff 64bit]
    [ 0.293279] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.303139] pci 0000:00:09.0: PCI bridge to [bus 01-01]
    [ 0.303144] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.303183] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.303195] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
    [ 0.303213] pci 0000:02:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
    [ 0.303225] pci 0000:02:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
    [ 0.303277] pci 0000:02:00.0: supports D1 D2
    [ 0.303278] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.313132] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.313137] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
    [ 0.313140] pci 0000:00:0a.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
    [ 0.313187] pci 0000:05:06.0: [1814:0601] type 00 class 0x028000
    [ 0.313204] pci 0000:05:06.0: reg 10: [mem 0xfe9f0000-0xfe9fffff]
    [ 0.313322] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.313326] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.313330] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.313331] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.313333] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.313335] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.313336] pci 0000:00:14.4: bridge window [mem 0xc7f00000-0xdfffffff] (subtractive decode)
    [ 0.313338] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.313388] pci 0000:03:00.0: [1106:3403] type 00 class 0x0c0010
    [ 0.313408] pci 0000:03:00.0: reg 10: [mem 0xfe7ff800-0xfe7fffff 64bit]
    [ 0.313419] pci 0000:03:00.0: reg 18: [io 0xd800-0xd8ff]
    [ 0.313504] pci 0000:03:00.0: supports D2
    [ 0.313505] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
    [ 0.323166] pci 0000:00:15.0: PCI bridge to [bus 03-03]
    [ 0.323171] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
    [ 0.323174] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff]
    [ 0.323192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.323279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.323297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
    [ 0.323311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.323332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 0.323371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
    [ 0.323386] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.323388] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.323389] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.325822] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
    [ 0.325859] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
    [ 0.325896] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
    [ 0.325932] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
    [ 0.325959] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
    [ 0.325980] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
    [ 0.326001] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
    [ 0.326021] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
    [ 0.326094] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.326096] vgaarb: loaded
    [ 0.326097] vgaarb: bridge control possible 0000:04:00.0
    [ 0.326125] PCI: Using ACPI for IRQ routing
    [ 0.332165] PCI: pci_cache_line_size set to 64 bytes
    [ 0.332227] reserve RAM buffer: 000000000009b800 - 000000000009ffff
    [ 0.332228] reserve RAM buffer: 00000000c7ea0000 - 00000000c7ffffff
    [ 0.332293] NetLabel: Initializing
    [ 0.332294] NetLabel: domain hash size = 128
    [ 0.332295] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.332303] NetLabel: unlabeled traffic allowed by default
    [ 0.332334] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.332337] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.334364] Switching to clocksource hpet
    [ 0.338169] pnp: PnP ACPI init
    [ 0.338178] ACPI: bus type pnp registered
    [ 0.338246] pnp 00:00: [bus 00-ff]
    [ 0.338248] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.338251] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.338252] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.338254] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.338255] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.338256] pnp 00:00: [mem 0xc7f00000-0xdfffffff window]
    [ 0.338258] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.338282] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.338331] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.338333] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.338363] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.338384] pnp 00:02: [dma 4]
    [ 0.338386] pnp 00:02: [io 0x0000-0x000f]
    [ 0.338387] pnp 00:02: [io 0x0081-0x0083]
    [ 0.338388] pnp 00:02: [io 0x0087]
    [ 0.338389] pnp 00:02: [io 0x0089-0x008b]
    [ 0.338390] pnp 00:02: [io 0x008f]
    [ 0.338391] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.338405] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.338411] pnp 00:03: [io 0x0070-0x0071]
    [ 0.338425] pnp 00:03: [irq 8]
    [ 0.338442] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.338448] pnp 00:04: [io 0x0061]
    [ 0.338462] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.338466] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.338469] pnp 00:05: [irq 13]
    [ 0.338485] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.338610] pnp 00:06: [mem 0xfed00000-0xfed003ff]
    [ 0.338627] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.338668] pnp 00:07: [mem 0xfec00000-0xfec00fff]
    [ 0.338669] pnp 00:07: [mem 0xfee00000-0xfee00fff]
    [ 0.338695] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.338697] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.338699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.338773] pnp 00:08: [io 0x0010-0x001f]
    [ 0.338774] pnp 00:08: [io 0x0022-0x003f]
    [ 0.338775] pnp 00:08: [io 0x0062-0x0063]
    [ 0.338776] pnp 00:08: [io 0x0065-0x006f]
    [ 0.338777] pnp 00:08: [io 0x0072-0x007f]
    [ 0.338778] pnp 00:08: [io 0x0080]
    [ 0.338779] pnp 00:08: [io 0x0084-0x0086]
    [ 0.338780] pnp 00:08: [io 0x0088]
    [ 0.338781] pnp 00:08: [io 0x008c-0x008e]
    [ 0.338782] pnp 00:08: [io 0x0090-0x009f]
    [ 0.338783] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.338784] pnp 00:08: [io 0x00b1]
    [ 0.338785] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.338787] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.338788] pnp 00:08: [io 0x040b]
    [ 0.338789] pnp 00:08: [io 0x04d6]
    [ 0.338790] pnp 00:08: [io 0x0c00-0x0c01]
    [ 0.338791] pnp 00:08: [io 0x0c14]
    [ 0.338792] pnp 00:08: [io 0x0c50-0x0c51]
    [ 0.338794] pnp 00:08: [io 0x0c52]
    [ 0.338795] pnp 00:08: [io 0x0c6c]
    [ 0.338796] pnp 00:08: [io 0x0c6f]
    [ 0.338797] pnp 00:08: [io 0x0cd0-0x0cd1]
    [ 0.338798] pnp 00:08: [io 0x0cd2-0x0cd3]
    [ 0.338799] pnp 00:08: [io 0x0cd4-0x0cd5]
    [ 0.338800] pnp 00:08: [io 0x0cd6-0x0cd7]
    [ 0.338801] pnp 00:08: [io 0x0cd8-0x0cdf]
    [ 0.338802] pnp 00:08: [io 0x0800-0x089f]
    [ 0.338804] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.338805] pnp 00:08: [io 0x0b00-0x0b1f]
    [ 0.338806] pnp 00:08: [io 0x0b20-0x0b3f]
    [ 0.338807] pnp 00:08: [io 0x0900-0x090f]
    [ 0.338808] pnp 00:08: [io 0x0910-0x091f]
    [ 0.338809] pnp 00:08: [io 0xfe00-0xfefe]
    [ 0.338810] pnp 00:08: [io 0x0060-0x005f disabled]
    [ 0.338812] pnp 00:08: [io 0x0064-0x0063 disabled]
    [ 0.338813] pnp 00:08: [mem 0xffb80000-0xffbfffff]
    [ 0.338814] pnp 00:08: [mem 0xfec10000-0xfec1001f]
    [ 0.338815] pnp 00:08: [mem 0xfed80000-0xfed80fff]
    [ 0.338816] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.338871] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.338873] system 00:08: [io 0x040b] has been reserved
    [ 0.338874] system 00:08: [io 0x04d6] has been reserved
    [ 0.338876] system 00:08: [io 0x0c00-0x0c01] has been reserved
    [ 0.338877] system 00:08: [io 0x0c14] has been reserved
    [ 0.338878] system 00:08: [io 0x0c50-0x0c51] has been reserved
    [ 0.338880] system 00:08: [io 0x0c52] has been reserved
    [ 0.338881] system 00:08: [io 0x0c6c] has been reserved
    [ 0.338883] system 00:08: [io 0x0c6f] has been reserved
    [ 0.338884] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.338886] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.338887] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.338889] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.338890] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.338892] system 00:08: [io 0x0800-0x089f] has been reserved
    [ 0.338893] system 00:08: [io 0x0b00-0x0b1f] has been reserved
    [ 0.338895] system 00:08: [io 0x0b20-0x0b3f] has been reserved
    [ 0.338896] system 00:08: [io 0x0900-0x090f] has been reserved
    [ 0.338898] system 00:08: [io 0x0910-0x091f] has been reserved
    [ 0.338899] system 00:08: [io 0xfe00-0xfefe] has been reserved
    [ 0.338901] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
    [ 0.338903] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.338904] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
    [ 0.338906] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.338920] pnp 00:09: [io 0x0060]
    [ 0.338921] pnp 00:09: [io 0x0064]
    [ 0.338958] pnp 00:09: [irq 1]
    [ 0.338977] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.339141] pnp 00:0a: [io 0x03f8-0x03ff]
    [ 0.339144] pnp 00:0a: [irq 4]
    [ 0.339146] pnp 00:0a: [dma 0 disabled]
    [ 0.339187] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.339220] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.339221] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.339222] pnp 00:0b: [io 0x0290-0x029f]
    [ 0.339250] system 00:0b: [io 0x0290-0x029f] has been reserved
    [ 0.339252] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.339269] pnp 00:0c: [mem 0xe0000000-0xefffffff]
    [ 0.339296] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.339298] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.339365] pnp 00:0d: [mem 0x00000000-0x0009ffff]
    [ 0.339366] pnp 00:0d: [mem 0x000c0000-0x000cffff]
    [ 0.339367] pnp 00:0d: [mem 0x000e0000-0x000fffff]
    [ 0.339369] pnp 00:0d: [mem 0x00100000-0xc7efffff]
    [ 0.339370] pnp 00:0d: [mem 0xfec00000-0xffffffff]
    [ 0.339401] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.339403] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.339405] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.339406] system 00:0d: [mem 0x00100000-0xc7efffff] could not be reserved
    [ 0.339408] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
    [ 0.339410] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.339470] pnp: PnP ACPI: found 14 devices
    [ 0.339471] ACPI: ACPI bus type pnp unregistered
    [ 0.345740] pci 0000:00:02.0: PCI bridge to [bus 04-04]
    [ 0.345742] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.345745] pci 0000:00:02.0: bridge window [mem 0xfe800000-0xfe8fffff]
    [ 0.345747] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.345750] pci 0000:00:09.0: PCI bridge to [bus 01-01]
    [ 0.345752] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.345756] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.345757] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
    [ 0.345760] pci 0000:00:0a.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
    [ 0.345763] pci 0000:00:14.4: PCI bridge to [bus 05-05]
    [ 0.345767] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.345773] pci 0000:00:15.0: PCI bridge to [bus 03-03]
    [ 0.345775] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
    [ 0.345778] pci 0000:00:15.0: bridge window [mem 0xfe700000-0xfe7fffff]
    [ 0.345808] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.345810] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.345811] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.345813] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.345814] pci_bus 0000:00: resource 8 [mem 0xc7f00000-0xdfffffff]
    [ 0.345816] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.345817] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.345818] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
    [ 0.345820] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.345821] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.345823] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.345824] pci_bus 0000:02: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
    [ 0.345826] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 0.345827] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.345829] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.345830] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.345831] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.345833] pci_bus 0000:05: resource 8 [mem 0xc7f00000-0xdfffffff]
    [ 0.345834] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.345836] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.345837] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
    [ 0.345866] NET: Registered protocol family 2
    [ 0.345989] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.346848] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.349037] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.349296] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.349298] TCP: reno registered
    [ 0.349310] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.349356] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.349453] NET: Registered protocol family 1
    [ 0.677681] pci 0000:04:00.0: Boot video device
    [ 0.677713] PCI: CLS 64 bytes, default 64
    [ 0.677749] Unpacking initramfs...
    [ 0.718032] Freeing initrd memory: 2908k freed
    [ 0.719807] PCI-DMA: Disabling AGP.
    [ 0.719871] PCI-DMA: aperture base @ bc000000 size 65536 KB
    [ 0.719872] PCI-DMA: using GART IOMMU.
    [ 0.719874] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.725070] LVT offset 1 assigned for vector 0x400
    [ 0.725079] IBS: LVT offset 1 assigned
    [ 0.725089] perf: AMD IBS detected (0x0000001f)
    [ 0.725203] audit: initializing netlink socket (disabled)
    [ 0.725213] type=2000 audit(1342095131.619:1): initialized
    [ 0.725791] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.727601] VFS: Disk quotas dquot_6.5.2
    [ 0.727633] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.727700] msgmni has been set to 15972
    [ 0.727874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.727898] io scheduler noop registered
    [ 0.727899] io scheduler deadline registered
    [ 0.727931] io scheduler cfq registered (default)
    [ 0.728079] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.728205] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
    [ 0.728311] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
    [ 0.728517] GHES: HEST is not enabled!
    [ 0.728597] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.749121] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.769870] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.770045] Linux agpgart interface v0.103
    [ 0.770081] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.770083] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.770826] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.770924] mousedev: PS/2 mouse device common for all mice
    [ 0.770963] rtc_cmos 00:03: RTC can wake from S4
    [ 0.771049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.771067] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.771072] cpuidle: using governor ladder
    [ 0.771074] cpuidle: using governor menu
    [ 0.771167] TCP: cubic registered
    [ 0.771232] NET: Registered protocol family 10
    [ 0.771354] NET: Registered protocol family 17
    [ 0.771357] Registering the dns_resolver key type
    [ 0.771479] PM: Hibernation image not present or could not be loaded.
    [ 0.771486] registered taskstats version 1
    [ 0.772203] rtc_cmos 00:03: setting system clock to 2012-07-12 12:12:12 UTC (1342095132)
    [ 0.772225] Initializing network drop monitor service
    [ 0.775123] Freeing unused kernel memory: 740k freed
    [ 0.775261] Write protecting the kernel read-only data: 8192k
    [ 0.778687] Freeing unused kernel memory: 1588k freed
    [ 0.780366] Freeing unused kernel memory: 640k freed
    [ 0.786942] udevd[81]: starting version 185
    [ 0.806218] usbcore: registered new interface driver usbfs
    [ 0.806236] usbcore: registered new interface driver hub
    [ 0.806293] usbcore: registered new device driver usb
    [ 0.806913] SCSI subsystem initialized
    [ 0.808327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.808550] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.808577] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.808585] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.808603] QUIRK: Enable AMD PLL fix
    [ 0.808612] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.808631] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff800
    [ 0.809224] libata version 3.00 loaded.
    [ 0.809903] xhci_hcd 0000:01:00.0: xHCI Host Controller
    [ 0.809925] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
    [ 0.810035] xhci_hcd 0000:01:00.0: irq 17, io mem 0xfe6fe000
    [ 0.810076] xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X
    [ 0.810081] xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 0.810085] xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
    [ 0.810090] xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 0.810094] xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X
    [ 0.810322] xHCI xhci_add_endpoint called for root hub
    [ 0.810323] xHCI xhci_check_bandwidth called for root hub
    [ 0.810492] hub 2-0:1.0: USB hub found
    [ 0.810497] hub 2-0:1.0: 2 ports detected
    [ 0.810688] xhci_hcd 0000:01:00.0: xHCI Host Controller
    [ 0.810693] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
    [ 0.813735] xHCI xhci_add_endpoint called for root hub
    [ 0.813737] xHCI xhci_check_bandwidth called for root hub
    [ 0.813784] hub 3-0:1.0: USB hub found
    [ 0.813792] hub 3-0:1.0: 2 ports detected
    [ 0.814472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.817469] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.817877] hub 1-0:1.0: USB hub found
    [ 0.817879] hub 1-0:1.0: 5 ports detected
    [ 0.818099] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.818107] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 0.818112] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.818129] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.818138] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe5ff400
    [ 0.827497] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.827604] hub 4-0:1.0: USB hub found
    [ 0.827606] hub 4-0:1.0: 5 ports detected
    [ 0.827728] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [ 0.827734] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
    [ 0.827739] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.827754] ehci_hcd 0000:00:16.2: debug port 1
    [ 0.827764] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe5ff000
    [ 0.837496] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 0.837603] hub 5-0:1.0: USB hub found
    [ 0.837605] hub 5-0:1.0: 4 ports detected
    [ 0.841081] ahci 0000:00:11.0: version 3.0
    [ 0.841136] ahci 0000:00:11.0: irq 48 for MSI/MSI-X
    [ 0.841201] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
    [ 0.841204] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 0.841602] scsi0 : ahci
    [ 0.841675] scsi1 : ahci
    [ 0.841726] scsi2 : ahci
    [ 0.841774] scsi3 : ahci
    [ 0.841809] ata1: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 48
    [ 0.841811] ata2: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 48
    [ 0.841814] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 48
    [ 0.841816] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 48
    [ 0.841947] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.841954] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
    [ 0.841984] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5fe000
    [ 0.898238] hub 6-0:1.0: USB hub found
    [ 0.898243] hub 6-0:1.0: 5 ports detected
    [ 0.898366] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 0.898373] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
    [ 0.898385] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fd000
    [ 0.954864] hub 7-0:1.0: USB hub found
    [ 0.954868] hub 7-0:1.0: 5 ports detected
    [ 0.954992] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 0.955005] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
    [ 0.955017] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fc000
    [ 1.011491] hub 8-0:1.0: USB hub found
    [ 1.011495] hub 8-0:1.0: 2 ports detected
    [ 1.011602] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [ 1.011607] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
    [ 1.011619] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5f3000
    [ 1.068113] hub 9-0:1.0: USB hub found
    [ 1.068118] hub 9-0:1.0: 4 ports detected
    [ 1.160646] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.160677] ata1: SATA link down (SStatus 0 SControl 300)
    [ 1.317173] usb 7-1: new low-speed USB device number 2 using ohci_hcd
    [ 1.327173] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.327198] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.332726] ata4.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
    [ 1.332728] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.332859] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
    [ 1.332862] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.338315] ata4.00: configured for UDMA/133
    [ 1.338581] ata3.00: configured for UDMA/133
    [ 1.338734] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
    [ 1.338907] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
    [ 1.341163] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.341181] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.341191] sd 2:0:0:0: [sda] Write Protect is off
    [ 1.341193] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.341215] sd 3:0:0:0: [sdb] Write Protect is off
    [ 1.341217] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.341225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.341238] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.351164] sda: sda1
    [ 1.351389] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 1.401086] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
    [ 1.401524] sd 3:0:0:0: [sdb] Attached SCSI disk
    [ 1.481781] usbcore: registered new interface driver usbhid
    [ 1.481782] usbhid: USB HID core driver
    [ 1.487591] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input0
    [ 1.487653] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:13.0-1/input0
    [ 1.508451] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
    [ 1.521532] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/input/input1
    [ 1.521648] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:13.0-1/input1
    [ 1.610307] usb 9-4: new full-speed USB device number 2 using ohci_hcd
    [ 1.726903] Refined TSC clocksource calibration: 3422.454 MHz.
    [ 1.726912] Switching to clocksource tsc
    [ 1.786627] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.3/input/input2
    [ 1.786674] generic-usb 0003:046D:0A0B.0003: input,hidraw2: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:16.0-4/input3
    [ 1.950887] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.192500] udevd[184]: starting version 185
    [ 3.958438] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.958443] ACPI: Power Button [PWRB]
    [ 3.958512] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.958514] ACPI: Power Button [PWRF]
    [ 3.978134] wmi: Mapper loaded
    [ 4.015387] pata_atiixp 0000:00:14.1: setting latency timer to 64
    [ 4.015586] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.015668] r8169 0000:02:00.0: irq 49 for MSI/MSI-X
    [ 4.015786] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc900119a0000, 00:25:22:69:80:29, XID 0c200000 IRQ 49
    [ 4.015788] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 4.015801] scsi4 : pata_atiixp
    [ 4.015859] scsi5 : pata_atiixp
    [ 4.016032] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [ 4.016034] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [ 4.033484] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.033560] sp5100_tco: mmio address 0xb8fe00 already in use
    [ 4.079638] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
    [ 4.079668] powernow-k8: 0 : pstate 0 (3400 MHz)
    [ 4.079670] powernow-k8: 1 : pstate 1 (2700 MHz)
    [ 4.079671] powernow-k8: 2 : pstate 2 (2200 MHz)
    [ 4.079672] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 4.106096] microcode: CPU0: patch_level=0x010000b6
    [ 4.127578] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 4.127723] microcode: CPU1: patch_level=0x010000b6
    [ 4.128583] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 4.128674] microcode: CPU2: patch_level=0x010000b6
    [ 4.129514] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 4.129606] microcode: CPU3: patch_level=0x010000b6
    [ 4.130329] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 4.130535] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 4.162216] EDAC MC: Ver: 2.1.0
    [ 4.212356] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
    [ 4.212375] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.222694] MCE: In-kernel MCE decoding enabled.
    [ 4.280312] [drm] Initialized drm 1.1.0 20060810
    [ 4.403795] AMD64 EDAC driver v3.4.0
    [ 4.403955] EDAC amd64: DRAM ECC disabled.
    [ 4.403974] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [ 4.403978] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [ 4.403982] (Note that use of the override may cause unknown side effects.)
    [ 4.445168] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [ 4.527650] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.790059] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 4.790219] Registered led device: rt2800pci-phy0::radio
    [ 4.790231] Registered led device: rt2800pci-phy0::assoc
    [ 4.790242] Registered led device: rt2800pci-phy0::quality
    [ 4.904991] [drm] VGACON disable radeon kernel modesetting.
    [ 4.905329] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.905330] [drm] No driver support for vblank timestamp query.
    [ 4.905333] [drm] Initialized radeon 1.33.0 20080528 for 0000:04:00.0 on minor 0
    [ 4.911887] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 4.911889] AMD IOMMUv2 functionality not available on this sytem
    [ 4.945232] firewire_core 0000:03:00.0: created device fw0: GUID 008f130026a90a00, S400
    [ 5.022074] usbcore: registered new interface driver snd-usb-audio
    [ 5.085203] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 5.085206] Disabling lock debugging due to kernel taint
    [ 5.090452] [fglrx] Maximum main memory to use for locked dma buffers: 7756 MBytes.
    [ 5.090549] [fglrx] vendor: 1002 device: 6738 count: 1
    [ 5.090911] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
    [ 5.091202] [fglrx] Kernel PAT support is enabled
    [ 5.091219] [fglrx] module loaded - fglrx 8.96.4 [Apr 5 2012] with 1 minors
    [ 5.100526] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 5.100607] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 5.100767] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 5.100828] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 5.100886] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 5.101067] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 5.101174] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 5.101661] snd_hda_intel 0000:04:00.1: irq 50 for MSI/MSI-X
    [ 5.145389] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card2/input12
    [ 7.130063] EXT4-fs (sdb7): re-mounted. Opts: (null)
    [ 7.205827] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.293502] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.388548] Adding 9748136k swap on /dev/sdb6. Priority:-1 extents:1 across:9748136k
    And for ultimate completeness (I hope so)
    lspci -v
    [root@rechenknecht ~]# lspci -v
    00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
    Subsystem: ASRock Incorporation Device 9601
    Flags: bus master, 66MHz, medium devsel, latency 0
    Capabilities: [c4] HyperTransport: Slave or Primary Interface
    Capabilities: [54] HyperTransport: UnitID Clumping
    Capabilities: [40] HyperTransport: Retry Mode
    Capabilities: [9c] HyperTransport: #1a
    Capabilities: [f8] HyperTransport: #1c
    00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: fe800000-fe8fffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Port (Slot+), MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [b0] Subsystem: ASRock Incorporation Device 9601
    Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [110] Virtual Channel
    Kernel driver in use: pcieport
    00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: fe600000-fe6fffff
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Port (Slot+), MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [b0] Subsystem: ASRock Incorporation Device 9601
    Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [110] Virtual Channel
    Kernel driver in use: pcieport
    00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Root Port (Slot+), MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Capabilities: [b0] Subsystem: ASRock Incorporation Device 9601
    Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [110] Virtual Channel
    Kernel driver in use: pcieport
    00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0])
    Subsystem: ASRock Incorporation Device 4391
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 48
    I/O ports at b000 [size=8]
    I/O ports at a000 [size=4]
    I/O ports at 9000 [size=8]
    I/O ports at 8000 [size=4]
    I/O ports at 7000 [size=16]
    Memory at fe5ffc00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
    Capabilities: [70] SATA HBA v1.0
    Capabilities: [a4] PCI Advanced Features
    Kernel driver in use: ahci
    00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem: ASRock Incorporation Device 4397
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
    Memory at fe5fe000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
    Subsystem: ASRock Incorporation Device 4396
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
    Memory at fe5ff800 (32-bit, non-prefetchable) [size=256]
    Capabilities: [c0] Power Management version 2
    Capabilities: [e4] Debug port: BAR=1 offset=00e0
    Kernel driver in use: ehci_hcd
    00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
    Subsystem

    When I do that and publish the navbar item, the subsribers do not see it as "Page in this application", they see the URL f?p=104:1.
    An example on htmldb.oracle.com could be useful.
    Scott

  • Problem with S-ATA optical drive(MSI 875P Neo)

    Ahoy MSIers,
    I am in a most dire situation, and before I go to spend money on some computer-tech guy to solve my problem, I thought maybe you could help me.
    *My PC specs:
    Intel Pentium 4 Northwood C 2800Mhz
    MSI 875P Neo
    A-DATA 512Mb RAM DDR 400 * 2(1024)
    PowerColor Radeon 9800Pro
    Western Digital Hard Drive 80Gb 8Mb buffer P-ATA
    Pioneer DVR-212D S-ATA (The main issue here)
    Bios - AMIBIOS - VERSION 3.31a
    Windows XP Pro - SP2
    Until 2 days ago I owned an MSI CD(P-ATA) burner which was virtually dead.
    2 days ago, It died completely, So I decided that I will not just replace a CD burner for a CD burner... no! I will buy myself a new shiny DVD burner!
    So I bought myself a Pioneer DVR-212D(S-ATA) and I went on with installing it.
    I plugged the Serial Power Cable from the PSU to the drive, and connected the drive and the S-ATA port on my M-Board with a serial-ata cable.
    I booted up, and found that the device was nowhere to be found although power is being transferred to it(the drive opens and closes when pressing it's eject button).
    I searched the net and found that I was supposed to "enable" S-ATA in my BIOS.
    Tried that, yet every setting I tried besides the default setting gives makes the computer freeze for a few minutes at the MSI logo and then a "friendly" error massage appears, usually it's something like
    "4th master drive ATAPI incompatible" ( the number changes, I haven't got a clue why).
    Searched the net a bit more and found almost nothing... most s-ata "problems" were about booting from a s-ata hard drive....
    I am getting desperate, So in order to maximize the chances of me getting help solving this issue, I took a few pictures of the BIOS and the inside of my case... maybe it will help, I dunno.
    Here are some pics:
    The S-ATA cable connected to the Mother-Board
    Back of the DVD burner with the S-ATA cable attached
    BIOS - standard CMOS features
    BIOS - Integrated Peripherals
    On-Chip IDE configuration
    P.S
    I have a DVD ROM(Toshiba, nothing special) and I would of course occasionally like to burn Dvds/Cd's from my DVD ROM to my DVD burner. However, seeing as the DVD burner is S-ATA, there is no physical connection what so ever between the two drives(unlike in P-ATA connection where each cable has 3 "connections", 2 for drives(hard or optical) and one for the Motherboard) I really don't know how I can "achieve" this.

    A friend of my father's, whose occupation is a computer technician toke a look at the PC and bios settings today.
    WE tried EVERYTHING and It still wouldn't work so we concluded that the problem is probably in the hardware.
    There were two possible "suspects" here - The Mother Board(specificially the S-ATA controller/ports on it) or the drive itself.
    We connected the drive to my sister's computer and it worked like a charm.
    So the answer was clear - something was wrong with the board.
    I replaced my S-ATA drive for an IDE drive, and all is well.
    Well
    that's the end of that story 

  • Problem with fibre channel card and raid system after upgrading to 10.4.7

    Hello, I have a problem with our Xserve G4 DP. After the installation of 10.4.7 everything works fine exept our fibre channel card. This card is connected to a Hitachi Raid System which worked fine over a year. But after the update the volume was no longer mounted. I even reinstalled the server to 10.4.4 and no sign of our raid volume. Using the apple fibre channel utiltiy 2.0, I see that there is a connection - but still the raid volume is not mounted. When I restart the server the lights on the back of the card are shortly flickering and sending some packets to the raid system but that´s all. Has anybody an idea?
    Greetings from Heidelberg
    Klaus
    Xserve G4 DP 1 GHz   Mac OS X (10.4.6)   Mac OSX Server 10.4.7

    You could re-update, by downloading the 10.4.7 Combination Updater from Apple.

  • Filename problem with RAID

    All,
    We have a problem with our Xserve RAID with regards to the way files are named. For example we have a file called "081bSelecting_SkyArea#18.tif" which will not copy to our RAID. If i was to copy this to our Xserve it would be fine, but as soon as it goes down the Fire Channel it says we have the incorrect permissions. As soon as i rename the file it works fine.
    I under stand from the link below that there has been issues like this in the past with 10.2, but i am unable to find anything with regards to 10.3 server which is what we are using.
    http://docs.info.apple.com/article.html?artnum=107144
    Many thanks for your time.
    Darren Senadhira

    Not sure. That bug you're referring to has to do with file sharing (e.g. AFP or SMB), it doesn't say anything about direct-connected fibre channel.
    Wish I had a server with RAID attached to tinker with this right now, but alas I don't at the moment. Any chance you can avoid using the #xx at the end of the file names?

  • Sata Raid problems with MSI KT4 Ultra Via kt400 chipset

    ok i am having major problems setting up my sata raid in my brothers msi KT4 Ultra via KT 400 chipset
    it comes up with my irq settings are wrong
    my hard drives are WD 120 GB 7200rpms SATA - sold my mobo asus A7N8X - Delux and used my bros mobo above but just cant get them to work if ne one has ne idea on how to fix it (bios is still factory default do i have too flash it to get it too work etc)
    would help lots thanx

    you dont need multiple threads on the same thing

  • Problem with raid set on xserve

    Hi to all!
    I hope you can help me with a big problem that I have with a Xserve of the work.
    Yesterday afternoon I come to the work and my partners mentioned to me that the web pages were not going. I tried to connect with ARD but he was not answering. I had to move to the building where the server is racked and when I connected a monitor a it was showing me a folder icon with an interrogation icon.
    Since this had happened to me in my Mac of the office once, I initiated from the installation DVD to see if I could repair permissions and/or the discs with the Disk Utility. For my surprise (and terror) does not show any volume or disk except the DVD.
    I got into the RAID Utility in the menu and there I could see the discs but the RAID Sets does not appear... We had mounted since we install the machine a raid 5 with 3 discs and 2 volumes on this raid set.
    Then, from the Terminal, doing "diskutil list" it's show no volume on any disk.
    I suppose that something has happened with the volumes and the raid cannot be mounted...
    Is there any way to  mount the volumes again? Something similar to the "fixmbr" that I believe that there are in others OS to restore the volumes tables...
    Is there any way to mount again the RAID without losing the information from the discs?
    Do you know that can be happening?
    PS: It is a Xserve of the last ones, with Mac OS X 10.6.8. I have already tried to reset the PRAM and it keeps on doing the same.

    The Server Monitr does say anything. It doesnt pick up any server. I tried to add the XServe in the Server Monitor, but it keeps waiting for a reply after I have put in the username, password and IP address.
    It is an XServe with a Mirror software RAID on the 2 x Internal Hard Drives within the XServe
    I am not using the SAN software
    There have been reports of fault latchs on the Apple Drive Bay Modules. Do you think this could be causing the units to dismount?

  • Raid problems with K7N2G ILSR

    I have the following setup and problem:
    K7N2G ILSR
    NEC DVD-+RW 1300A
    Seagate SATA 120gb HD
    350W PSU with "210" 3.3 + 5.0
    BIOS V 1.4
    2 x Hynix 256mb DDR 333
    I was able to setup the SATA drive as a single RAID drive and install XP pro.
    Now, 9/10 times, the system will not boot.  I receive a
    "No drive attached to fasttrak controller"
    message.
    When the system DOES boot, it works great, and I can leave in on for days with NO problems.
    I know the Hynix memory is not "approved", but since the system is stable (when it does boot), and assume its not a memory problem.
    The problem still occurs even after:
    I changes the SATA cable (data and power)
    I changed the DVD cable and slot (1-3)
    I even disconneced the DVD and / or Floppy.
    No change
    Help!!!!!

    I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

  • Problem with Quadro4000 in a Mac Pro (Mid 2009)

    Does anyone has a problem with the Nvidia Quadro 4000 on his Mac Pro?

    I have a major problem, it can't boot to start up the computer, I must to hold the shift button to open and when it opens it sticks and the colors of the wallpaper is not good. Also I have a raid card. The apple service told me that the problem is the graphic card and must be replaced but I am not sure about it, unfortunately I don't have the first card to be sure.
    Do you know what the follow message means?
    Interval Since Last Panic Report:  3378 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    109D6AB4-796F-DAB1-788B-3CEBA562D0BE
    Thu Sep 19 19:20:19 2013
    panic(cpu 0 caller 0xffffff8019ab8945): Kernel trap at 0xffffff7f9b214d66, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x000000000000008c, CR3: 0x000000000e72a000, CR4: 0x0000000000000660
    RAX: 0x0000000000000000, RBX: 0x0000000000000006, RCX: 0x0000000000000005, RDX: 0x0000000000003c00
    RSP: 0xffffff81eb423280, RBP: 0xffffff81eb423280, RSI: 0x0000000000000005, RDI: 0xffffff803a7d1400
    R8:  0x0000000000000000, R9:  0xffffff803d4facb8, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0x0000000000000004, R13: 0xffffff81ba18f000, R14: 0xffffff81ba1a2938, R15: 0xffffff803a7d1400
    RFL: 0x0000000000010206, RIP: 0xffffff7f9b214d66, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x000000000000008c, Error code: 0x0000000000000002, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb422f20 : 0xffffff8019a1d636
    0xffffff81eb422f90 : 0xffffff8019ab8945
    0xffffff81eb423160 : 0xffffff8019acebfd
    0xffffff81eb423180 : 0xffffff7f9b214d66
    0xffffff81eb423280 : 0xffffff7f9b1f6cec
    0xffffff81eb4232d0 : 0xffffff7f9b2252ff
    0xffffff81eb423700 : 0xffffff7f9b1d5c80
    0xffffff81eb423730 : 0xffffff7f9b2291dd
    0xffffff81eb4237b0 : 0xffffff7f9b210460
    0xffffff81eb423810 : 0xffffff7f9b210d41
    0xffffff81eb423860 : 0xffffff7f9b211294
    0xffffff81eb4238d0 : 0xffffff7f9b211a53
    0xffffff81eb423910 : 0xffffff7f9b1dcedf
    0xffffff81eb423a90 : 0xffffff7f9b20df8f
    0xffffff81eb423b50 : 0xffffff7f9b1db978
    0xffffff81eb423ba0 : 0xffffff8019e6f789
    0xffffff81eb423bc0 : 0xffffff8019e70d30
    0xffffff81eb423c20 : 0xffffff8019e6e74f
    0xffffff81eb423d70 : 0xffffff8019a98c21
    0xffffff81eb423e80 : 0xffffff8019a20b4d
    0xffffff81eb423eb0 : 0xffffff8019a10448
    0xffffff81eb423f00 : 0xffffff8019a1961b
    0xffffff81eb423f70 : 0xffffff8019aa6546
    0xffffff81eb423fb0 : 0xffffff8019acf473
         Kernel Extensions in backtrace:
            com.apple.GeForce(8.1.6)[0E3D8776-A5B7-3D82-9BFD-9188170B358D]@0xffffff7f9b1c90 00->0xffffff7f9b296fff
               dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f9a1 79000
               dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f9a165000
               dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f9a0df000
               dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f9a122000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12F37
    Kernel version:
    Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
    Kernel UUID: B1B58405-A2B2-3C44-B25D-495053D52AB5
    Kernel slide:     0x0000000019800000
    Kernel text base: 0xffffff8019a00000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 213721035844
    last loaded kext at 35243841547: com.apple.driver.AppleBluetoothHIDKeyboard     170.2.4 (addr 0xffffff7f9b9f9000, size 24576)
    last unloaded kext at 96410920956: com.apple.driver.AppleUSBXHCI     630.4.5 (addr 0xffffff7f9aa9b000, size 118784)
    loaded kexts:
    com.nvidia.CUDA     1.1.0
    com.vmware.kext.vmnet     3.0.0
    com.vmware.kext.vmioplug     3.0.0
    com.vmware.kext.vmci     3.0.0
    com.vmware.kext.vmx86     3.0.0
    com.apple.driver.AppleBluetoothMultitouch     75.19
    com.apple.driver.AppleHWSensor     1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager     4.1.7f2
    com.apple.driver.AudioAUUC     1.60
    com.apple.driver.AppleTyMCEDriver     1.0.2d2
    com.apple.driver.AGPM     100.13.12
    com.apple.iokit.IOUserEthernet     1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.filesystems.autofs     3.0
    com.apple.driver.AppleMikeyHIDDriver     124
    com.apple.driver.AppleHDA     2.4.7fc2
    com.apple.driver.AppleUpstreamUserClient     3.5.12
    com.apple.driver.AppleMCCSControl     1.1.11
    com.apple.GeForce     8.1.6
    com.apple.driver.AppleMikeyDriver     2.4.7fc2
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.1.7f2
    com.apple.driver.AppleLPC     1.6.3
    com.apple.driver.AppleSMBusPCI     1.0.11d1
    com.apple.driver.ApplePolicyControl     3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
    com.apple.driver.XsanFilter     404
    com.apple.iokit.SCSITaskUserClient     3.5.6
    com.apple.driver.AppleUSBHub     623.4.4
    com.apple.driver.AppleFWOHCI     4.9.9
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.BootCache     34
    com.apple.driver.Intel82574L     2.3.0b5
    com.apple.driver.AirPort.Brcm4331     615.20.17
    com.apple.driver.AppleRAIDCard     304
    com.apple.driver.AppleAHCIPort     2.6.6
    com.apple.driver.AppleUSBEHCI     621.4.6
    com.apple.driver.AppleUSBUHCI     621.4.0
    com.apple.driver.AppleRTC     1.5
    com.apple.driver.AppleHPET     1.8
    com.apple.driver.AppleACPIButtons     1.8
    com.apple.driver.AppleSMBIOS     1.9
    com.apple.driver.AppleACPIEC     1.8
    com.apple.driver.AppleAPIC     1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient     214.0.0
    com.apple.nke.applicationfirewall     4.0.39
    com.apple.security.quarantine     2.1
    com.apple.driver.AppleIntelCPUPowerManagement     214.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard     170.2.4
    com.apple.driver.AppleMultitouchDriver     237.4
    com.apple.iokit.IOSerialFamily     10.0.6
    com.apple.iokit.IOSurface     86.0.4
    com.apple.kext.triggers     1.0
    com.apple.driver.DspFuncLib     2.4.7fc2
    com.apple.iokit.IOAudioFamily     1.9.2fc7
    com.apple.kext.OSvKernDSPLib     1.12
    com.apple.nvidia.gf100hal     8.1.6
    com.apple.NVDAResman     8.1.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.1.7f2
    com.apple.driver.AppleSMBusController     1.0.11d1
    com.apple.iokit.IOFireWireIP     2.2.5
    com.apple.driver.AppleHDAController     2.4.7fc2
    com.apple.iokit.IOHDAFamily     2.4.7fc2
    com.apple.driver.AppleGraphicsControl     3.4.5
    com.apple.iokit.IONDRVSupport     2.3.7
    com.apple.iokit.IOGraphicsFamily     2.3.7
    com.apple.driver.AppleSMC     3.1.5d4
    com.apple.driver.IOPlatformPluginLegacy     1.0.0
    com.apple.driver.IOPlatformPluginFamily     5.4.1d11
    com.apple.driver.AppleUSBHIDMouse     175.8
    com.apple.driver.AppleHIDMouse     175.8
    com.apple.driver.AppleUSBHIDKeyboard     170.2.4
    com.apple.driver.AppleHIDKeyboard     170.2.4
    com.apple.driver.IOBluetoothHIDDriver     4.1.7f2
    com.apple.iokit.IOBluetoothFamily     4.1.7f2
    com.apple.iokit.IOUSBHIDDriver     623.4.0
    com.apple.driver.AppleUSBMergeNub     621.4.6
    com.apple.driver.AppleUSBComposite     621.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.5.6
    com.apple.iokit.IOBDStorageFamily     1.7
    com.apple.iokit.IODVDStorageFamily     1.7.1
    com.apple.iokit.IOCDStorageFamily     1.7.1
    com.apple.iokit.IOAHCISerialATAPI     2.5.5
    com.apple.iokit.IOFireWireFamily     4.5.5
    com.apple.iokit.IOUSBUserClient     630.4.4
    com.apple.iokit.IO80211Family     530.5
    com.apple.iokit.IONetworkingFamily     3.0
    com.apple.iokit.IOSCSIParallelFamily     2.5.1
    com.apple.iokit.IOSCSIBlockCommandsDevice     3.5.6
    com.apple.iokit.IOSCSIArchitectureModelFamily     3.5.6
    com.apple.iokit.IOAHCIFamily     2.5.1
    com.apple.iokit.IOUSBFamily     630.4.5
    com.apple.driver.AppleEFINVRAM     2.0
    com.apple.driver.AppleEFIRuntime     2.0
    com.apple.iokit.IOHIDFamily     1.8.1
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.security.sandbox     220.3
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.DiskImages     345
    com.apple.iokit.IOStorageFamily     1.8
    com.apple.driver.AppleKeyStore     28.21
    com.apple.driver.AppleACPIPlatform     1.8
    com.apple.iokit.IOPCIFamily     2.8
    com.apple.iokit.IOACPIFamily     1.4
    com.apple.kec.corecrypto     1.0
    Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.93 GHz, 16 GB, SMC 1.39f5
    Graphics: NVIDIA Quadro 4000, NVIDIA Quadro 4000, PCIe, 2048 MB
    Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 3, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 4, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 7, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    Memory Module: DIMM 8, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 5 incoming serial ports
    Network Service: LINKSYS WAG320N, AirPort, en2
    Network Service: Ethernet 2, Ethernet, en1
    PCI Card: NVIDIA Quadro 4000, sppci_displaycontroller, Slot-1
    PCI Card: NVIDIA Quadro 4000, NVDA,Parent, Slot-1
    PCI Card: pci1033,194, Slot-3
    PCI Card: Apple RAID Card, sppci_raid, Slot-4
    Serial ATA Device: Optiarc DVD RW AD-7240S
    Serial ATA Device: Optiarc DVD RW AD-7240S
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd500000 / 2
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd530000 / 4
    USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd520000 / 3
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x5a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 5
    USB Device: Smart-UPS 2200 FW:654.19.I USB FW:7.4, 0x051d  (American Power Conversion), 0x0002, 0x1d100000 / 2
    USB Device: PTK-840, 0x056a  (WACOM Co., Ltd.), 0x00ba, 0x3d100000 / 2
    FireWire Device: built-in_hub, 800mbit_speed

  • Problem with install on new compy, something to do with external?

    Hello, so I have been having a few problems with installing Arch on my new computer. On my old laptop I never ran into this problem on any distro of LINUX I installed, nor on any other of the systems I have installed Arch on. I believe it might have something to do with the fact that I am running the live cd off of an external dvd drive maybe? I am kind of stuck here, so any help would be greatly appreciated! Thanks!
    If it helps
    System Specs:
    Motherboard: ASROCK 890FX Deluxe3
    Processor: AMD Phenom II X4 955
    Graphics Card: ATI Radeon HD 5700 Series
    Hard Drives: 2 SATA 160gb hd RAID 0, and one 160gb ATA hd
    OS: Windows 7 Professional on the RAID 0, hoping to put ARCH on the ATA (I have tried booting the ATA first in the list behind the USB DVDROM to no avail)
    External Drive: Sony DVD/CD RW drive DRX-510UL
    External DVDROM is the exact same drive I used to install windows 7 professional.
    External DVDROM is plugged into one of my USB 2.0 ports, but the error still persists.
    I am using the EXACT same disk I used when installing it on my past computer.
    Trying to install x86_64 version of Arch, gets past the splash.
    Output that I could catch:
    :: Running Hook [archiso]
    :: Rinning Hook [archiso_pxe_nbd]
    :: Mounting tmpfs, size 75%... done.
    :: Waiting for boot device...
    Waiting 30 seconds for device /dev/disk/by-label/ARCH_201005 ...
    usb 9-1 : device descriptor read/64, error-62
    usb 9-1 : new full speed USB device using ohci_hcd and address 3
    usb 9-1 : device descriptor read/64, error-62
    usb 9-1 : device descriptor read/64, error-62
    usb 9-1 : new full speed USB device using ohci_hcd and address 4
    usb 9-1: device not accepting address 4, error -62
    usb 9-1 : new full speed USB device using ohci_hcd and address 5
    usb 9-1: device not accepting address 5, error -62
    hub 9-0:1.0: unable to enumerate USB device on port 1
    scsi 6:0:0:0: CDROM        SONY        DVDRW DRU-510A 1.0d PQ: 0 ANSI: 0
    scsi 6:0:0:0: Attached scsi generic sg3 type 5
    sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    ERROR: boot device didn't show up after 30 seconds...
        Falling back to interactive prompt
        You can try to fix the problem manually, log out when you are finished
    /bin/sh: can't access tty; job control turned off
    If you need any other info, I can grab it of course.
    Last edited by crusniknano (2010-07-12 19:49:13)

    K, got it running. was having errors with the USB hd, but just changed the name it booted from to the name of the drive. thanks!

Maybe you are looking for

  • TS4268 How to registed my phone number

    hello , plz tell to how to registed the phone number for imessage?

  • How to tune the query..."sum" operation is taking too much long time...

    how to reduce the execution time for the below query..."sum" operation is taking too much long time.... SELECT B.DP_AVPS_STATUS, SUM(DP_AD_CURR_BAL*D.ISIN_CLOSE_PRICE) Qty, B.DP_NET_WORTH, B.CMN_DP_FLAG, B.RESTRAIN_TYPE , B.LETT_GENR_DATE, E.MAX_NET_

  • Regarding ICAL event update api

    Hi All, Please provide me the JAVA API to update a particular event from the recursive pattern. see i have done with the creating ICAL event daily/recursive into the outlook calendar using java and it is working fine. Now i want to update particular

  • CC apps for Windows Surface RT?

    I am trying to download Photoshop on the desktop of my Windows Surface RT but I keep getting a messagee the I can only download it on a PC, which it is. When I called technical support I was told to download photoshop touch which is only available fo

  • [SOLVED] Opus codec support

    "Release notes for GStreamer Bad Plug-ins 0.10.23 "The Game Has Changed" - opus: new Opus audio codec elements: opusdec, opusenc, opusparsertpopusdepay, rtpopusay In arch I have: gstreamer0.10-bad-plugins 0.10.23-2 is not support opus. New version su