Problem with my USB port in MSI MS-6534

Hello everybody.
I bought an external hard drive and when I connected it to the USB port appear a message that I don't have any port of high velocity and I need to install a controller or high velocity. I don't understant to much about that, but I bought my computer in 2001, and I thought I had USB 2.0 ports. My technical data are:
name of motherboard: MSI MS-6534
chipset: i845
BIOS: Award Award Modular BIOS v6.00PG , DATE OF BIOS : 09/28/01
I don't know if it is neccesary to update the drivers, or maybe the BIOS , I download the drivers that appear in the page of MS-6534, but i don't want to intall nothing because I am no sure. Please someone can tell me if I must install these drivers of some BIOS update?, of maybe my motherboard don't support USB 2.0 .and do you know if is  necessary to install the windows xp servipack 2?
thank you in advance

yes, you need SP2. Make sure you fully install Intel INF driver.

Similar Messages

  • Problems with wireless usb adapter on MSI K8NGM-V

    Hi!
    I have a 3Com (3crusb20075) wireless usb adapter, and a MSI K8NGM-V Mainboard. Very often the usb disconnects from the network and i have to reinsert it to work again. A friend of mine have the exact same adapter and that one fails too. He uses mine without problems. I therefore belive that this is a problem with the usb ports on my mainboard. Have anyone heard of anything like this? I wanted to try to update my bios but i don't have a floppy so msi live update wouldnt let me, and i could find the bios files on the msi webpage so i cant burn them on a bootable cd. Help please
    (I trying turning of power save mode on the usb adapter, without any luck. Tested it in linux. Same result)
    Alex

    The ability to access the network, but not the Internet, typically indicates that the computer is not able to either find or negotiate with the DNS servers. The proper DNS servers would be provided by your ISP using DHCP. In turn, the AirPort would use DHCP to provide these to both the wired & wireless computers connected to it.
    Please try the following:
    For each PC that is unable to access the Internet, temporarily include the following OpenDNS servers:
    o Primary: 208.67.222.222
    o Secondary: 208.67.220.220
    You would enter these in the network TCP/IP settings for the respective PC's wireless network adapters. You may need to restart the computer in order for these DNS settings to "stick." After restarting, can you access the Internet with either or both of them?

  • Problems with the USB Ports

    Hi there,
    I writing this because I'm having some really big problems with my USB ports.
    A few days ago I plugged in an USB-Hub that was quite cheap. Suddenly a window popped up saying that a USB device was deactivated because it "needed" to much power. Since this happening, two of those windows keep popping up everytime I boot the MacBook. I called Apple and got some help: I had to delete some .plist files and clear some caches. The man who helped was able to find the error and deactivate the notification, he also told me to make a PRAM- and a SMC-reset. The man said that it's just a software problem and that I have to reinstall the system if we don't find a solution. So, one day later I reinstalled the system (Lion) and not only didn't it help, the two notification windows were popping up again...everytime I booted the Mac. So I decided to formate the whole hard drive and install Snow Leopard -> still the problem with the USB ports. After that I installed Lion  -> still the problem with the USB ports. I even tried to extract the .kext files that are important for the USB functionality from an earlier Combo Update, but it didn't help either. The point is, that the Mac doesn't recognize my external hard drive or any of my iDevices. Sometimes it recognizes USB sticks, but only after 20 seconds. The data transfer on both USB ports is also very slow. If I'm lucky and Mac recognizes one of my USB sticks, it takes like an hour for 1GB to be transfered on the USB stick or from the USB sticks to the Mac.
    I really don't know what to do and need help, especially because my backup data is on my external hard drive which I can't access because of this problem.
    I really hope that someone can help me, I'm very thankful for every answer that could help me!
    PS: Sorry for my bad English, I hope that everyone understands what I mean, please tell me if you don't get what I'm trying to explain in the text above.
    Sincerely,
    iLoud
    [UPDATE] I downloaded "USB Prober" and copied the Output file, maybe it helps:
    Timestamp Lvl            Message
        0.698 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7316), outstandingIO(0), _interruptReadPending(false) - rearming read
        0.698 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
        0.735 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
        0.735 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe -  noting status change
        0.735 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
        0.739 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
        0.739 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
        0.761 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7320), outstandingIO(0), _interruptReadPending(false) - rearming read
        0.761 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
        0.798 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
        0.798 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe -  noting status change
        0.798 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
        0.801 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
        0.801 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
        0.823 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7324), outstandingIO(0), _interruptReadPending(false) - rearming read
        0.823 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
        0.860 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
        0.860 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe -  noting status change
        0.860 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
        0.863 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
        0.863 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
        0.885 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7328), outstandingIO(0), _interruptReadPending(false) - rearming read
        0.885 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
        0.922 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
        0.922 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe -  noting status change
        0.922 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
        0.926 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
        0.926 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
        0.947 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7332), outstandingIO(0), _interruptReadPending(false) - rearming read
        0.947 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
        0.984 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
        0.984 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe -  noting status change
        0.984 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
        0.987 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
        0.987 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
        1.009 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7336), outstandingIO(0), _interruptReadPending(false) - rearming read
        1.009 [3]          AppleUSBUHCI[0x4f97000]::UIMCreateInterruptTransfer - root hub interrupt transfer - clearing unneeded memDesc (0x5073080) from dmaCommand (0x506a100)
        1.045 [3]          AppleUSBUHCI[0x4f97000]::UIMAbortEndpoint - endpoint 1:1,1
        1.045 [3]          AppleUSBUHCI[0x4f97000]::RHAbortEndpoint - Interrupt pipe -  noting status change
        1.045 [3]          AppleUSBHub[0x5076c00]::InterruptReadHandler error kIOReturnAborted (expected)
        1.049 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - Host controller resume detected - calling EnsureUsability
        1.049 [2]          AppleUSBUHCI[0x4f97000]::HandleInterrupt - deferring further processing until we are running again
        1.071 [3]          AppleUSBHub[0x5076c00]::DecrementOutstandingIO(7340), outstandingIO(0), _interruptReadPending(false) - rearming read

    Oh, sorry, I meant "I'm writing this...".

  • Problems with GE60 USB ports

    Hi everyone, a new issue with my GE60 Apache Pro's USB ports has come up, mind you this is a brand new laptop. If I plug in a USB device while in Windows 7 it will be recognized and installed, no problem. However, if I reboot into Windows with the same device already plugged in, the USB ports will stop functioning. Even though that device will appear to be recognized it won't be functional. In fact, no other devices I try to use afterwards are recognized and Windows will stall indefinitely if I try to shut down/reboot. I would have to manually power down the laptop, remove any devices, then boot up again and it would be fine.
    Any idea what's causing this? Any advice would be appreciated, thanks.

    Quote from: adrian5683 on 19-May-14, 00:27:31
    Hi everyone, a new issue with my GE60 Apache Pro's USB ports has come up, mind you this is a brand new laptop. If I plug in a USB device while in Windows 7 it will be recognized and installed, no problem. However, if I reboot into Windows with the same device already plugged in, the USB ports will stop functioning. Even though that device will appear to be recognized it won't be functional. In fact, no other devices I try to use afterwards are recognized and Windows will stall indefinitely if I try to shut down/reboot. I would have to manually power down the laptop, remove any devices, then boot up again and it would be fine.
    Any idea what's causing this? Any advice would be appreciated, thanks.
    What USB devices are you using for reboot and afterward? and does this happens on all USB ports?
    Quote from: adrian5683 on 20-May-14, 23:59:38
    Narrowed the issue down to Intel's HD 4600 graphics driver... no idea how it affects the USB ports but the driver itself is unstable, already caused two BSODs...
    Can you tell the BSOD messages or provide dump files for the crash downs?

  • Problem with the USB ports

    The usb ports work, but when i start up my computer, occaisionally the mouse won't work.  I'll have to unplugg it from the usb port, wait ten seconds, and plug it back in and it'll work fine.  I was just wondering if anyone knows what might be the problem here. I'm on XP Pro, and i have the K7N2G-6570G-ILSR with the latest drivers installed.  thanks to anyone who can help
    -Merc

    I am having the same problem with my ADSL modem (speedtouch 330), and it is getting more worring as my initial modem has stopped working entirely  , and I have had to borrow one from a friend, but it is starting to do it as well. 
    So help is required asap, before it fails althogether.
    Marc U.

  • NB200 running Windows XP - What's wrong with my USB ports?

    I bought a new NB200 recently and have had a problem with my USB ports ever since.
    Independently, both rhs ports operate fine with my Logitech wireless mouse - unless I attach it via a USB hub. When I use the second port to attach another device - in this case an external DVD-RW - the mouse simply freezes. Meantime, the DVD-RW itself is recognised by Device Manager, etc - ("Working fine - with plenty of available power output per port), but it nonetheless fails to work and Windows Explorer is unable to read any disc inserted in it.
    Furthermore, the lhs USB port is pure decoration only; nothing I attach to it (even the mouse) will work, neither will the Sleep & Charge capability (at any of the 4 Modes).
    I've uninstalled the USB controllers and ports using Device Manager which, after re-booting, continues to report that all's well, both with the devices I attach and the ports themselves, albeit i's still patently not!
    I'm concerned that I'm still unable to create a recovery disc should the worst happen so can anyone help me resolve my conundrum, please?
    Am I doing something wrong or, less likely to be the case, I'm sure, is there perhaps a fault with my machine??
    Any advice would be helpful, please.
    Regards
    Bob

    Thanks for the suggestion, Guys, but neither provided the solution. I'd already updated both BIOS and Chipset drivers to the latest available.
    Incidentally, the OS is the version of XP that came already loaded - subsequently updated via Windows Update, of course.
    Any further thoughts anyone??
    Bob

  • Problems with USB port on MSI 880GMA-E45 mainboard

    i am currently using this 880gma-e45 mainboard with all items below
    cpu: amd athlonIIx3 440
    heatsink: cooler master v6gt
    ram: kingston 2gb ddr3 1333mhz
    hdd: wd 500gb caviar green and wd 320 scorpio blue
    graphic: onboard ati 4250
    psu: cooler master real power pro 750w
    pci: d-link wireless adapter
    dvd: lite-on dvd
    casing: cooler master haf 912 advanced with 2 200mm and 1 120mm fans
    my problem is my usb ports are not working properly..even my microsoft standard usb mouse sometimes undetectable, unable to install driver sofware when plugged in..only ps2 port are working properly..any device i plugged into the usb port, all of them are not working properly..pendrive not detected, external hardisk sometimes detected but need to be formatted in order to use..can anybody help me with this?

    Quote from: Svet on 08-December-10, 00:48:07
    Install chipset drivers from MSI web:
    http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
    +
    NEC USB 3.0 Drivers:
    http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
    are these the same driver provided with the disc driver? as i already installed both of these..

  • Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any su

    Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any suggestions?
    MacBook Air, OS X Mountain Lion (10.9.1)

    Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT201210 I tried to update my sons ipod.  It has the itunes logo with the usb port on the screen.  If I restore I will loose all his games and music.  Is this my only option???  Help !!

    I tried to update my sons ipod.  It has the itunes logo with a usb port on the screen.  If I restore it I will loose all his games and music.  Is there any way around this??  Please Help??

    Yes, that is your only option.Yes.  You have to restore.
    Try the following if you have difficulty restoring.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Problem with detecting USB devices.. something abt ehci-hcd??

    Hi All,
    I have a DELL E6410 laptop. I have a problem with connecting USB devices.
    Whenever a power event (such as connecting/disconnecting of AC adaptor) happens, my laptop stops detecting any USB devices and any changes that happen on the USB ports. That is, say an external mouse is connected to the laptop, the mouse stops functioning, and if I connect a mouse/USB_stick or any such thing to the computer, the device is not detected.
    dmesg output show that any connecting/disconnecting events are not detected by the computer. lsusb output too shows the same thing.
    To solve the problem, I need to rmmod the module ehci-hcd and modprobe it back. That is, I have to run the commands rmmod ehci-hcd followed by modprobe ehci-hcd. Then, this problem goes away until the next power event happens.
    This event does not happen all the time, but it happens very regularly.
    Here are the kernel and laptop specs..
    uname -a
    Linux myhost 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64 Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz GenuineIntel GNU/Linux
    Kindly help me on this issue.
    Thanks

    This is the output of kernel.log when I unplug my AC adaptor with the external USB mouse connected.
    Sep 12 11:18:33 localh ost kernel: [ 591.015557] EXT4-fs (sda6): re-mounted. Opts: commit=600
    Sep 12 11:18:37 localhost kernel: [ 595.478866] ehci_hcd 0000:00:1a.0: PCI INT A disabled
    Sep 12 11:18:37 localhost kernel: [ 595.478919] ehci_hcd 0000:00:1a.0: PME# enabled
    Sep 12 11:18:37 localhost kernel: [ 595.498827] ehci_hcd 0000:00:1d.0: PCI INT A disabled
    Sep 12 11:18:37 localhost kernel: [ 595.498877] ehci_hcd 0000:00:1d.0: PME# enabled
    After this the the mouse goes dead (the light on the mouse also goes off).
    If I disconnect the mouse at this stage, there is no change in kernel.log. If I the mouse back too, there is no change in kernel.log.
    Now, when I turn the AC adaptor on, this is the output on kernel.log
    Sep 12 11:22:16 localhost kernel: [ 813.917712] EXT4-fs (sda6): re-mounted. Opts: commit=0
    Sep 12 11:22:16 localhost kernel: [ 813.977405] NMI watchdog enabled, takes one hw-pmu counter.
    Sep 12 11:22:16 localhost kernel: [ 813.977453] NMI watchdog enabled, takes one hw-pmu counter.
    Sep 12 11:22:16 localhost kernel: [ 813.980838] NMI watchdog enabled, takes one hw-pmu counter.
    Sep 12 11:22:16 localhost kernel: [ 813.980874] NMI watchdog enabled, takes one hw-pmu counter.
    Sep 12 11:22:16 localhost kernel: [ 814.075104] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xd6970000-0xd69703ff] (PCI address [0xd6970000-0xd69703ff])
    Sep 12 11:22:16 localhost kernel: [ 814.075148] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Sep 12 11:22:16 localhost kernel: [ 814.075189] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    Sep 12 11:22:16 localhost kernel: [ 814.075256] ehci_hcd 0000:00:1a.0: PME# disabled
    Sep 12 11:22:16 localhost kernel: [ 814.075279] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Sep 12 11:22:16 localhost kernel: [ 814.075295] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Sep 12 11:22:17 localhost kernel: [ 814.228224] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xd6950000-0xd69503ff] (PCI address [0xd6950000-0xd69503ff])
    Sep 12 11:22:17 localhost kernel: [ 814.228246] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
    Sep 12 11:22:17 localhost kernel: [ 814.228273] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
    Sep 12 11:22:17 localhost kernel: [ 814.228310] ehci_hcd 0000:00:1d.0: PME# disabled
    Sep 12 11:22:17 localhost kernel: [ 814.228324] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    Sep 12 11:22:17 localhost kernel: [ 814.228333] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    Sep 12 11:22:17 localhost kernel: [ 814.614404] usb 2-1.1: reset low speed USB device number 3 using ehci_hcd
    At this point, the mouse comes back to life (its light begins to glow) and I can move the mouse pointer on the screen.
    The output of the grep command that rwd gave is too big (16000 lines) to be pasted here..
    Thanks,

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

  • Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

    I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

    As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
    You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

  • Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

    Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

    Using USB 3 devices on Mac computers FAQ

  • What do I need to display whatever I call up on my MacBook running OSX 7.5 on a TV with a USB port?

    What do I need to display whatever I call up on my MacBook running OSX 7.5 on a TV with a USB port?

    There is a VGA adapter to TV S-Video RCA Out Cable for PC Video.http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7

  • Can a USB Keyboard/Barcode reader be used with the USB port on the CRio

    Is it possible to use a USB Keyboard or Barcode reader with the USB port on the CRio, I know you can use this port with a USB memory device, but what about other devices?
    I have a project that requires that all hardware elements be connected to the controller and use the HMI purely for display,
    anybody any ideas?? 

    Hi kmoyna,
    The standard CompactRIO range's USB host ports are not suitable for standard USB devices like keyboards or barcode readers - they are intended only for use of mass storage devices. From your description, it seems your project's requirements would be best met by the newer models, cRIO-9081 or cRIO-9082. These two units have Windows Embedded Standard 7 (WES7) and allow the direct connection of a monitor and standard USB devices. We now also have similar stand-alone CompactDAQ models running WES7 - cDAQ 9139.
    I would recommend calling into your local branch to discuss your project further with one of our engineers. If you're in the UK, it's 01635 523 545 - or view contact details for other branches.
    Regards,
    Imtiaz Chowdhury
    Head of Digital Technologies
    Brand786

Maybe you are looking for