Problem with my X7-00 display

Hi guys, I have big problem with my X7-00 display... like it has been magnetized, but I'm not sure is that even possible. It is discolored, like on old CRT television displays. Any ideas?

Didn't help Tried hard reset also... nothing.
Ana Maric

Similar Messages

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

Problems with Turkish characters not displaying correctly

A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material. Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
Helvetica LT CondensedLight
Turkish character “ İ ” does not display correctly in either Word or InDesign.
Gill Sans
Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
My questions are:
1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font. Is this because the font is newer and includes the additional characters? Would this work in InDesign?

One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
http://www.babelstone.co.uk/Unicode/babelmap.html
but I personally prefer the downloadable .exe file.

Problem with the way fonts display in Internet Explorer

Howdy. I built a site about a week ago (first crack at this). It has quite a bit of content but seemed to be fine on Safari, Netscape and Firefox. I checked it out at work on a PC with Internet Explorer 6 and there were typography problems. I intentionally used simple web fonts (all Arial) to hopefully minimize this sort of thing. I used a 70% tint of Black for the font color on all the fonts. On Explorer the fonts display fine on pages 1, 2, 3, and 4. On page 5 the type appears blurry, really greyed and spread. I can't figure out why (same fonts and styles).
As an experiment I tried posting just a couple of pages with the type at 100% black. The really bad pages weren't so bad (but not nearly as good as on the other browsers.) The site is rballister.com. If you click on any of the links (picture boxes) on the "print & mail index" pages you will see the problem with the type. Thanks in advance for any help anyone can provide.

Because I thought it would be a nice effect, I decided to use the slider in the color pallette and change to color of the type from 100% black to 70% black (which is to to say a shade of gray). I'm referring to text that I keyboarded into iWeb. As previously mentioned, the gray type worked just fine on most browsers but caused problems in Internet Explorer (in a seemingly random way. Still can't figure out the reason). When I changed the type to black on a white background (black and white), the problem wasn't as bad as it was in Explorer, but still not nearly as good as in the other browsers.

Very big problem with professional Color Managed Display in PS CC and CS6 win7 64 bits

How to reproduce this problem:
- Photoshop CS6/CC
- Win 7 Ultimate 64 bits English with all the updates.
- ATI 7870 / HD 550 and early graphics cards.
- Dell U3014, CINTIQ 21UX (in the 7870), 2 samsung 2232 in the 5500 (all on, or one at the time)
- Spyder 3/4 Elite, Eyeone Display 2, DispCal (argyll), ColorEyes 1.60
After the calibration and profile process with everyone of this Display profling tools (lets supose that is all right), open a image with more saturated colors (with Adobe 1998 RGB color space) in CS6 or CC, and hit the "F" key to toggle screens.
You will see that the saturated colors will change (will become even more saturated) in the nest two screen modes, and color come back to the "normal" if hit F one more time.
Seems like the photoshop get rid of calibration luts in the 2 F screens modes and come back to normal when the image are in the initial screen mode.
ps: the loaders startups of each display calibration, was choosed one of the time when I restart the PC ( so, there are no multi loaders trying to put your luts at same time)
- PS CS6 / CC and WINDOWS are totally up to date
- The driver of display cards, are the latest AND the windows certificated
- There are no other software installed on the PC that try to handle the display card or even diferents CMS.
- In fact the Windows is a fresh install
- This happen in RGB and CMYK images.
This is very frustating..:(

Dear Lundberg, in fact I'm wrong about this happen in RGB images, only happen in CMYK (whatever CMYK)
If you have an up to date Win 7 64bit, PS CS6 or CC, and calibrate your display with any colorimeter spectrophotometer and their respective softwares. Download an image like this flowers:
http://hdw.eweb4.com/out/663221.html
Before, be sure to set in PS, this color settings attachad :
Open this file, convert to CMYK and hit the F key to toggle between screen modes.
If you have a calibrated display with, let me say, Eyeone and Coloreyes, and the videoLuts loader is on, when you hit the "F" key, the colors on the CMYK image, will become way more saturated/heavy/dense, so Hit the F key until the screen mode is "normal" the color come back to the normal too.
I test this behavior in 8 machines so far, and in all this machines, the change in the colors are very noticiable, to reach a point that I cant be used in color professional works.
I hope that now I could express my self good enough.
Regards.

Problem with resolution of external display

Hi,
I am trying to use external display with my Unibody Aluminium Macbook Pro (NVIDIA GeForce 9400M, 2.26Gh, snow leopard). Cable setting I use is quite complicated as it is: macbook: minidisplay port>hdmi> DVI D : display. Display is LG Flatron W2242T (4:3).
So I hooked everything up and macbook detected display without any problem. The problem arises when it comes to resolution. Maximum resolution I can set (and in fact the only except 800xsomething) is 1152x870 and not only it is to low, but also it does not respect 4:3 ratio so it looks quite bad. So bad, that i cant really work on a setup like that. When I try to change resolution to any other, Display goes black. I tried using some apps, but they dont really work.
What can be the problem here? Is it connection?
I would appreciate any help.

And once you've cut thru the clutter of cables and adapters, remember the max you will be able to push the Flatron is its "native resolution", that happens to be:
Screen Size
22"
Screen Type
TFT LCD
Wide Screen
Yes
Brightness
300cd/m²
Contrast Ratio
8000:1
Viewing Angle
(Horizontal/Vertial)
160/160
Response Time
5ms
Resolution
1680X1050
Supported Colours
16.7M Colours
(data taken from LG's product page)
If you happen to have a late model MBP with the widescreen option, the Mac and the display will be on a 1:1 ratio, both are the same. Else, if you have a regular MBP, the monitor has more resolution than the Mac (1440x900) and distortion will occur if you do video mirroring.

Problem with HDMI to mini display port

I have been using the HDMI adapter to mini-display port successfully with my TV for months. I have a late 2011 Macbook Pro. My brother borrowed the cable to use with my mom's 2013 Macbook Pro retina display and now the adapter won't work. He could not get it to work with her Macbook and had not realised that it had HDMI input so used that instead. Now he returned the adpater to me and it does not work! I am running software version OS X 10.9.2. I read about a lot of problems similar but they seem to relate to 10.8.2 software. Can anyone help or advise me why my adapter has given

I have two adapters and both have stopped working after using them with the later (2013) Mac. I think it may have damaged them in some way!

Resolution Problems with 30-inch Apple Display and my new iMac

I'm not very good at computers, so I could use some help. I just bought a new iMac 24-inch, 3.06 Duo and I have an Apple 30-inch display I had connected to my MacBook Pro. Now I can't get a resolution better than 1280x800 and the cinema screen flickers a bit. I bought a mini-DVI to Dvi Adaptor. What else am I doing wrong? The display is enormous on the cinema display and I need to use that for my photography. Help anyone, please?

i'm not sure if you area sking this... but it seems like the info about the iMac is not to do with the problem, but your problem is with the 30 inch screen and the macbookPro?
If you are asking about a macbookPro plugging into the 30 inch screen, these should be able to run full resolution from what i remember,
you need to check that you are NOT trying to run mirrored desktop as this will limit the resolution to the maximum possible of the smaller display (your macbookpro) which will mean you can only go up to 1280x800 but if you uncheck the 'mirror display' option you should be able to set independent settings for each screen.

Problems with my online # not displaying on friend...

I have a Skype subscription and a Skype online phone number with a local area code for where I live, which is Wyoming. When I first signed on with Skype and selected my online number, each time I'd call one of my friend's cell phone, my local number would show up properly in their caller ID.
Now when I call, the number that displays is not my number. My phone number begins with a 307 area code, however, the number that shows up is [edited for privacy].
I don't have a cell phone so I'm unable to set a number in my Skype account, however, this shouldn't matter because it used to work properly, but now it doesn't!
Anybody have some suggestions on how to fix this problem? Is it even fixable? Also, does anybody have an e-mail address for Skype Tech Support? If so, I'd be much obliged if you could pass it along in a reply to this post. Thanks!
Respectfully,
/jp/

ihave problems my account not open

Problems with HP Solution Center Display

I am using Windows 7 and IE. I have most recent Flash Player. Solution Center no longer displays. I have tried suggestions on website. Can't find Control Panel for Flash Player. Does anyone have a resolution for the display problem? Also Weather Channel no longer displays.

Hello there! Welcome to the forums @dstef1605 ,
I have some suggestions in mind for the issue you're having with installing your printer on Windows 7. However, I would first need to know which printer you have.
Please let me know the printer model and we will troubleshoot from there!
Also, if you have an all in one, make sure you can make copies from the printer and include the results in your reply.
How Do I Find My Model Number?
Happy Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

R400 Facing problem with Black screen no display

It all started when i using net half way my screen freeze with lots of altered colors.
I have tried to oning laptop series r400 and it loads till windows screen and then it goes blank screen after that.
I am certain that the latop is still running and everything is fine just that there is no display output.
I have tried to enter the bios setup and changed the output from discrete to integrated output and also disabling the auto selection for display output (third option) and i found that it works so i probably guess problem could be with discrete display output.
However, i am not 100% certain that it is the main problem for this blank screen. Is there anyway i can verify this problem or best find the solution to it. Reply me thank you
Moderator Note; subject edited.

light on but no boot sound.
No "chord" on startup means the Mac didn't pass it's startup diagnostics tests.
Try here > Resolve startup issues and perform disk maintenance with Disk Utility and fsck
It would only boot after some 20 minutes after several attempts.
If you can get it to boot to the desktop, check to see how much free space there is on the startup disk.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.

Problem with images and text displaying correctly

I don't really know how to explain this problem and I had two screenshots ready to upload to show the before and after but we apparently can't upload photos now...SOOOO I will try my best.
The issue began when I got a new computer at work (Windows 7 instead the Windows XP everyone else has) and was/is present for me in InDesign CS2 and since we were planning on updating to CS5, I figured that having an updated version would fix whatever issue it was. That was a wrong assumption unfortunately.
When I open any document, all images and text are displayed properly until I scroll up/down or side-to-side and NOT using the scroll wheel for up/down. This is probably so confusing and I'm sorry I can't describe it better...the mouse I use has two programmable buttons that I set to coast up and down and to go side-to-side I can push the scroll wheel to one side or the other and it coasts that direction. When I do either of those things, the text looks like it is permanently greeked and the images look....weird lol like they are in 16 bit or something like that. To fix the problem in CS2, I have to click and hold on a text block until I am able to adjust text so that I can see it adjust in real-time. In CS5, I have to do the same basic thing except I don't have to click and hold as it does that by default (awesome feature btw!!)
I have already updated my graphics card driver (Nvidia 9400 GT 1GB) and my processor driver (Intel Core2Duo 3.0ghz) and I have 4GB of RAM. I tried updating both CS2 and CS5 but both are updated already. I've also tried doing the whole inx. export and cleaning the preferences file or whatever that is called. Nada. If someone thinks they can help me, I can send them the two images I was going to upload here. Email me at justgeig (at) gmail (dot) com Thanks in advance!

maybe greeked isn't the right word...i don't know how to explain it
here is the correct view. It is much more noticable when the whole document shows this.

Problem with T400 and External Display....

I have a new T400 (less than 1 month old) with the shared memory Intel Graphics setup and I cannot get it to work with an external display of any kind.
I've tried 2 LCD panels (one widescreen, and one 4:3), 2 analog monitors, and a video projector without any luck. All of the displays I have tried work fine with my older Lenovo R61.
I've updated to the newest display drivers and tried working with the various settings under Graphics properties in Vista - Single Display (notebook, monitor), Intel Dual Display, Extended Desktop, etc. The best I got was a cloned image on the larger widescreen LCD panel that appeared for about 1 minute and then stopped. I recreated this 4 or 5 times, but the image would not stay on the external display.
Any ideas?
Thanks,

go into bios, check your video output option and whether you selected Internal + VGA, i think... i will check for you on my X60s....
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Problem with MacBook waking when display is connected.

I have an external display connected to my MacBook Pro (2009 model), via the mini display port.
After the MacBook has been sleeping, if I go to wake it up (by lifting th elid and/or pressing keys on the keyboard), the external display wakes up, but the laptop screen does not. Also, the cursor does not move and nothing responds. I end up having to force shutdown by holding the power button. It is extremely irritating.
Does anyone know what might be causing the problem? I am running the latest version of Lion btw.
Thanks,
Oscar

Ozzmystro wrote:
I am running the latest version of Lion btw.
Therein lies your problem, I suspect...
This is just one of many similar threads on Lion and dual monitors:
https://discussions.apple.com/thread/3205633?start=0&tstart=0

[Win/CS3] Problem with tree view nodes display In Release Version of InDesign

b [Win/CS3]
Hi All,
I am Facing a problem from last few days.I have a dialog on which i have a treeview ListBox.I am filling this listBox dynamically.On a Button click Event.
My requirement is to show Some text value on the node and Index value on the back end.So When i select String1 the index1 should be Selected.
b This Listbox is working fine ON Debug Version. But Crashing On Release Version.That seems Strange to me..........?????????
b in DialogObserver::Update on button click event
NodeID node = IDCGridNodeID::Create(IndexX);
treeMgr->NodeAdded(node);
b and in TreeviewMgr::ApplyDataToWidget
TreeNodePtr<IDCGridNodeID> nodeID(node);
PMString IndexNo= nodeID->GetName();
I am going to database and retrieving string value according to that
IndexNo.
WCHAR Buf[200];// this contains value retrieve from database
Then i am converting WCHAR[] to CHAR[] BY using
size_t origsize = wcslen(Buf) + 1 ;
const size_t newsize = 100;
size_t convertedChars = 0;
char nstring[newsize];
wcstombs_s (&convertedChars, nstring, origsize, buf, _TRUNCATE);
PMString StringToDisplay(nstring);
//Till here its working fine
But when i am setting this value as Node name
style.Translate();
setNodeName( widgetList, StringToDisplay, kIDCTVTextWidgetID );
and function return kTrue; statement executed The application is crashing.
With error showing
b INdesign Encountered a problem Needs to close.
I Am not able to find out why this is not working on Release while it is working fine on debug version..???????????????????
Is I am missing or Made some changes For release version..????
Thanks,

Hi Michael,
Thanks for your reply.
The lines
NodeID node = IDCGridNodeID::Create(IndexX);
treeMgr->NodeAdded(node);
are working fine for Both Debug N Release version.The Application Is crashing In tree view manager class as i explained.
while it works fine without having even a single warning in debug version.
I read the document and i find out if i want to add node in treeview i have to call
treeMgr->NodeAdded(node);
which will call manager
b and in TreeviewMgr::ApplyDataToWidget
i am getting my node name as
TreeNodePtr<IDCGridNodeID> nodeID(node);
PMString IndexNo= nodeID->GetName();
I don't think that something is wrong in this but i am not sure becoz i am new in indesign development.
for adding nodes i referred the SDK examples.I found the same code for adding.

Problem with my X7-00 display

Similar Messages

Maybe you are looking for