Problem with nano while connected to the computer

Last night at about ten thirty I connected my iPod to iTunes and it said htat there was a software update availible. I updated the software, and a little box popped up saying that the iPod would show up in the iTunes menu when it was finished restarting. That was last night. It has been almost fourteen hours and my iPod is still not in the iTunes menu. I CAn't disconnect from the computer, because that little do not disconnect message is flashing and I don't want to break my iPod. HELP!

You could try resetting your iPod (while connected to your computer).
To reset:
First, toggle your iPod's "Hold" switch back and forth a couple of times (make sure to leave it on the white side).
Now, begin to press and hold the Menu and Select (center) buttons on your iPod together for 5-10 seconds.
You might need to try this several times. Also, after each time you reset your iPod, it might take up to a minute before iTunes recognizes it in the Source List.
-Kylene

Similar Messages

  • Problems with Deskjet 3050A connecting to the computer (Mac)

    Hi,
    I have recently moved to university and have bought my new printer with me (which I had set up at home). But I am having real problems connecting it to the computer. It doesn't accept the wireless connection because it is secure as it is from the university. The USB connection also doesn't seem to work as it always says that the printer is not connected. I have tried installing the software again and it recognises the printer from the USB, but there is no difference when I try to print something.
    Please help as it's essential for my studies!
    Thanks

    Welcome to the forums. You need to:
    1. Bind your desktop machines to your Open Directory master
    2. Create groups and user accounts in WorkGroup Manager which allow your users to log into those computers
    You will find the User Admin documents here useful:
    http://www.apple.com/server/documentation/
    hth,
    b.

  • IPod locked up while connected to the computer, "saying do not disconnect"

    iPod locked up while connected to the computer saying "Do Not Disconnect"

    Is it red? If so, then it's supposed to happen. As far as I know, there's no way around it.

  • Time Machine - Problem with establishing a connection to the server

    Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
    “There wasa problem with establishing a connection to the server ”SERVERNAME”.
    The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
    Any ideasfor a solution?

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • IPhone 4S screen auto lock not working with Music Playback, while connected to the Computer via USB

    Hello Everyone,
    I have an iPhone 4S, updated to the latest version of iOS (7.1). Recently, I noticed that my iPhone's screen doesn't autolock automatically whenever it's connected via the sync cable to my Laptop Computer (A Dell Studio running Windows 8.1 Pro). This happens regardless of whether iTunes is running or not. Whenever the music playback is on, the screen just gets dimmed after a while (as it always does before the screen auto-lock triggers), and stays like that. However, when I stop music playback, the auto-lock work just fine.
    I want to know, is this normal? I mean, is this the way it's supposed to be?
    Thanks and Regards,
    Rajat S.

    ALSO, iTunes has been updated to iOS 12.0.1.

  • Hello i have problem with my phone connect to the pc

    as i read the tutorial it says that once i plug in my usb cable i would see a notification on my phone on usb debugging or option to choose. But it never pop out for my device. it straight goes to charging my phone. Is there anybody could help me in this? 

    I've had similar problems with several types of phone, and it only seems to be when connected to a vista pc, my solution was to go back to XP, now have no such troubles. Good luck

  • Problems with synch and connection to the store.

    When i connect my iPhone 3Gs with my Windows PC 64 Bit and try to synch the progress bar stops at a certain point and nothing happens (even after an hour).The second problems occurs when i try to connect to the iTunes Store. Either way nothing happens ( at the progress bar) or an error appears and says check your internet connection or try again later. I checked my internet connection and tried it about 10 times. I deinstalled iTunes and re-installed it repaired it and restarded the pc, made all updates and it's still not working. Please Help!

    same problem here. when am trying to access store i get the error "itunes has stopped working"

  • Problem with Java cache which makes the computer very slow.

    Hello!
    I think that Java has installed som code that creats problems to my processor when I am working with the computer.
    I have got the following wrong code: 0x805 8023 and the containerfile & file below:
    1) Containerfile C:\Users\Oskar\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\11\37a4040b-62415be5
    2) File C:\Users\Oskar\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\11\37a4040b-62415be5->cuumfrsmeyghklbvetb/bljwt
    hwbhkkbsywmtwjeqk.class
    Could you please help me to get rid of the problem?
    You can do it directly or give me the instructions by e-mail : [email protected]
    Thank you in advance
    Best regards

    Check for malware infection. The names of these files really indicate the system is infected.
    Which version of Java client is installed? Especially older versions are very vulnerable against website or email based attacks.
    Since malware infections are very different, detailed support can hardly be given via forums.
    Best greetings from Germany
    Olaf

  • Problems with User Accounts connecting to the server

    I created couple of user accounts but the users can not connect to their accounts from the computer lab. i want to know how properly set the accounts to login to any computer in the lab.

    Welcome to the forums. You need to:
    1. Bind your desktop machines to your Open Directory master
    2. Create groups and user accounts in WorkGroup Manager which allow your users to log into those computers
    You will find the User Admin documents here useful:
    http://www.apple.com/server/documentation/
    hth,
    b.

  • HT204387 I'm having a problem with my iphone5 connecting to the Nike Fuel Band via bluetooth, any quick fixes out there?

    Hello
    I cannot connect my new iphone5 to my Nike Fuel Band ( purchased at the Apple store, so I'm hoping it connects with one of their devices). Does anyone know if there is a fix? I have Bluetooth enabled on the phone. It's just not discovering the other Bluetooth enabled device. I've tried pairing with another portable Bluetooth speaker as well, and that was also not discovered. Of all products, I would have thought Apple had this part down already. A little frustrating.
    Thank you,
    L

    Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
    It sounds like you are connected to the Ethernet LAN port.

  • I was trying to pair my notebook with iphone3gs and i had problems with my internet connectivity,so the iphone gave an error message that should it ignore my pc, not thinking clearly i clicked ok.since then i couldnt pair my iphone with mypc via bluetooth

    Trying to pair my phone with my pc via bluetooth , had internet connection error .my iphone asked to forget about my pc and i clicked yes thinking i can redo the connection later but ever since, my iphone as refused to discover my pc .i have tried every thing i know but to no avail . can you pls help
    thanks

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Has Apple fixed the problem with 4G cellular connection?

    Has Apple fixed the problem with 4G cellular connection on the iPad 3?

    Cellular connection problem was for US connection in Houston, Texas.  Have an iPad 2 which functions perfectely on Wi-Fi or 3G.  Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection.  Purchased on with the AT &T cellular.  Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all.  Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all.  Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service.  Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's.  Didn't seem to matter if it was AT&T or Verizon.  So I decided that I would just return the unit and wait for Apple to fix the problem.  Hence my question.
    Appreciate very much your time in responding to my question.

  • When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

    When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
    In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

    bump, I have same issue. thanks, MM

  • I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

    I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I  am using windows 7 professional install disc. I  can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • I have just bought an ipod classic, I already have an ipod nano.  The new ipod was connected to the computer to charge and it named itself with my name on the old nano, how do I get the computer to recognise the new one

    I have just bought an ipod classic, I already have an ipod nano.  The new ipod was connected to the computer to charge and it named itself with my name on the old nano, how do I get the computer to recognise the new one?

    My mistake, it was nothing to do with format.  It woldn't sync because my movies were HD.  HD movies won't sync to an iopd classic 160 GB but when you purchase a HD movie, itunes gives you a SD vervsion of the movie which is compatible with the ipod.  Just needed to go to store, click movies, click purchased and untick the HD box and there you have the SD versions.  Download the SD versions and then sync your ipod and bobs you uncle, movies are on the ipod

Maybe you are looking for

  • How to make a column in interactive report dropdown box

    Hi Friends, In simple reports we are having one option to make a column as a dropdown box.Is there any such option in interactive reports.Please help, Thanks, Nav

  • No Sound playing AVI files in Quicktime Pro - help!

    Help! I just bought QT Pro for Windows(Xp) to convert my AVI files to Mpeg4 for my Ipod. The Apple Store sales guy promised it could be done. I see video but no sound on all of the AVI files. For example, on 2 of my AVI video files, according to Gspo

  • How do I convert a powerpoint document to a pdf and retain the notes?

    How do I convert a powerpoint document to a pdf and retain the notes?

  • Gathering the data

    how do i make it so that when the radio button is clicked, a string of text is displayed below it? everytime i make an action listener for one of the radio buttons, my application won't run import java.awt.*; import java.awt.event.*; import javax.swi

  • Reorganization of texts for InfoCubes

    In transaction RSDCUBE there are is a button for "infoCube Utilities".  One of the functions is called "reorganize texts".  I can find no documentation on this function - what does it do?