Problem with NEF thumbnails in Bridge

Hi there,
Currently my NEF files in Bridge are showing up very small and not increasing in size when I adjust the zoom. I can see the image, it just stays small. I've tried to install the latest Camera Raw Plug-in (5.3), but that does nothing to help.
When looking at the Camera Raw plug-ins in Photoshop, it says that I have 2 installed (5.3 and 5.0.0.178). I'm assuming that I need to remove the 5.0 version - but can't find it anywhere. I've looked in the Applications>Adobe Photoshop CS4>Plug-ins>FileFormats and /Users/amanda/Library/Application Support/Adobe/Adobe Photoshop CS4> but it's not in either. (The root directory doesn't even have a plug-in folder). I've also done a spotlight search, but nothing appears.
I'm using CS4 and a Nikon D90 camera.
Can anyone help?

Amanda Burgess wrote:
I'm assuming that I need to remove the 5.0 version - but can't find it anywhere.
That means that you installed 5.3 incorrectly, because it needs to be installed in the same folder where the old, obsolete 5.0 resided, and you would have had to replace the old one.
Amanda Burgess wrote:
I'm assuming that I need to remove the 5.0 version - but can't find it anywhere. I've looked in the Applications>Adobe Photoshop CS4>Plug-ins>FileFormats and /Users/amanda/Library/Application Support/Adobe/Adobe Photoshop CS4>
Not too good at following instructions, are you? (just kidding.) Both of those folders are incorrect. You need to be looking at the Root Level Library. (See old screen shot below; though it shows ACR 5.1, the path is the same for 5.3.)
Amanda Burgess wrote:
I've also done a spotlight search, but nothing appears.
Spotblight (Apple's useless "Spotlight") is a piece of cr@p. Try EasyFind (freeware) instead.

Similar Messages

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Problem with NEF files from Nikon D4

Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?

This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same.

Bridge CS4 - problem with yellow thumbnails

I've installed Bridge and Photoshop CS4 and am having a problem with very yellow thumbnails (I still have CS3 installed and this is NOT happening there with the same images). I'm running on a a Windows Vista Service Pack1 platform. When I download my images from my Nikon D300 NEF and jpg files they look fine on the card and the download selection screen in Bridge but when they are downloaded they are VERY yellow (both NEFs and jpgs). The minute I open them in Photshop CS4 they are fine with no adjustments necessary. Does anybody have any ideas?
j.
PS - with 4G Ram both programs are running noticibly faster than CS3 on the same machine - that's a good thing!

If you use the embedded jpeg do you still get yellow thumbs? Don't have CS4 but that option is under workspaces quick link I think.
If so if they were just RAW images you would need to tweek the ACR default settings.

Problem with Light Table in Bridge CS6

Hi! After a re-install (which didn't fix the problem with PS), I now find that, when using the light table in Bridge CS6 and after hitting the space bar, if I then click on the image, it goes to 800% size! Prior to the uninstall & re-install, it worked perfectly in taking images to 100% size.
Hope someone can help.......
Thanks, Wardie

Why did you reinstall photoshop cs6?
What operating system are you using?
Did you reinstall all the updates for photoshop cs6 by going to Help>Updates from within photoshop cs6?
After you enter the light table, use your mouse scroll wheel to zoom back to 100% and exit the light table.
The next time you go to the light table and click on the picture it should only go to 100%.

Problems with Youtube thumbnails

I am having problem with Safari while browsing Youtube thumbnail images, they either load really slow or not at all. The strange thing is Firefox browser loads them all instantly. Does anyone else have this problem?
I am using an AirPort connection to a 2wire 2700HGV-B modem/router.
iMac Intel, 2 foot, 2.16GHz, 1GB Mac OS X (10.4.7)

Hello Doug,
This sounds a little like a problem we had with wireless connectivity. The setup is via a landline broadband modem, and a wireless router. When we downloaded much, especially video, it would seem that Safari froze until I turned Airport off and then back on.
The problem went away when we went into the settings for the wireless router and the landline broadband router, and disabled the facility for the routers to act as a server.
Maybe your setup is different; but if it's similar, you could try that.
Best wishes from Ireland,
Martin
If you found that this contribution helped to answer your question, please consider awarding some points. Why reward points?
Powerbook 15-inch G4 1GHz Mac OS X (10.4.8)

Problem with generating thumbnails for Facebook

After yesterday's Business Catalyst failure (Intermittent site loading issue on all data centers) we have a problem with thumbnails for Facebook.
Our each publication has an extra tag og:title placed in the <head>. For example in this article: http://www.leftlane.pl/lip14/zanizanie-przebiegu-samochodu-w-koncu-stanie-sie-niemozliwe.h tml
there is tag <meta property="og:image" content="http://www.leftlane.pl/lip14/images/364994_8207.jpg" />
Until yesterday, every published text was getting into debugger (https://developers.facebook.com/tools/debug/). Debugger fetch the image creating a thumbnail. Everything worked as it should.
Unfortunately, after yesterday's failure thumbnails are no longer generated. In place of the thumbnail is a white spot, like in the picture below. Can I do something to thumbnails work again?
We are using Adobe Muse (2014.1).

Just a word of warning about this facebook tester, facebook caches results for sometimes upto 48 hours, so if index the page using facebook then make a change on a page then reindex most of the time (in my dealings) it looked the same, I had to throw different querystring information into the URL or use different URLs to make it look different to facebook and get a fresh (re)index and for it to pick up changes.

Problems with IE w/ Apache bridge

We're recently switched over from IIS as our front end web server to Apache
1.3.12. On our login page for one of our site using IE 4.x / 5.x, we've
noticed this to be extremely slow (about 45 seconds) just to login. Once
you login to the site, the site is very fast. However, this is not the case
with Netscape (4.x/5.x). Netscape works fine all of the time and is very
fast with Apache.
Is there a known bug with IE?
All our login page does is pass username & password parameters to the
weblogic server.
This site doesn't have any problems with Netscape, going directly to the WLS
on the specified port, or when we used IIS. The only time this shows up is
when a user would login. Once they're in, they're flying!
This is only IE related. Is there some sort of odd setting in IE to hold up
a form like this?
Our config looks like this:
Web server: Linux 7.0; Apache 1.3.12 + apache-linux-bridge-sp5
Weblogic Server: Windows 2000, WLS 5.1, sp5
Database
Has anyone seen this before?

Thanks for the help everyone, but BEA sent us a beta-version of the new
proxy for Apache on LINUX. This fixed the problem, and should be fixed in
the next service pack.
"mreiche" <[email protected]> wrote in message
news:3a19ee1e$[email protected]..
>
See this article - we found a similar problem due to a sendRedirect() andfixed it by using a jsp:forward
instead.
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.develo
per.interest.jsp&item=3835&utag=
>
Mike Reiche
"Charlie Crook" <[email protected]> wrote:
Is the delay in loading your login page within the browser, or after the
user submits it?
Does the page contain IIS extensions ( which are no longer needed )?
"Mike Kendzierski" <[email protected]> wrote in message
news:3a120fa3$[email protected]..
We're recently switched over from IIS as our front end web server toApache
1.3.12. On our login page for one of our site using IE 4.x / 5.x,
we've
noticed this to be extremely slow (about 45 seconds) just to login.Once
you login to the site, the site is very fast. However, this is not thecase
with Netscape (4.x/5.x). Netscape works fine all of the time and is
very
fast with Apache.
Is there a known bug with IE?
All our login page does is pass username & password parameters to the
weblogic server.
This site doesn't have any problems with Netscape, going directly tothe
WLS
on the specified port, or when we used IIS. The only time this shows
up
is
when a user would login. Once they're in, they're flying!
This is only IE related. Is there some sort of odd setting in IE to
hold
up
a form like this?
Our config looks like this:
Web server: Linux 7.0; Apache 1.3.12 + apache-linux-bridge-sp5
Weblogic Server: Windows 2000, WLS 5.1, sp5
Database
Has anyone seen this before?

Problems with NEF files in Camera Raw 5.3

I have problem with my NEF files in CR. I import them from my harddrive, they open as 8 bit NEF files, but in CR, the only option I have is a depth, no space, resolution or size option where it should be, under the image. I also can't click on the info line under the image to change depth, space etc.
I have the option to change depth from 8 to 16 bit, but when I do that, I can't work on the image in Elements because a dialogubox says its not adequate size (or something along those lines).It is almost as if there is either not enough information on my files, or that CR 5.3 can't read them. I have a Nikon d60 so that should be OK with the software. I also download my images with a cardreader so they should still be RAW files.
If someone could help me I would be grateful, it's doing my head in!!!

…but in CR, the only option I have is a depth, no space, resolution or size option where it should be, under the image. I also can't click on the info line under the image to change depth, space etc. I have the option to change depth from 8 to 16 bit…
In ACR with PSE, under the image you have just two options, changing the zoom and changing the depth (bits per channel):
Why do you expect anything more?
I can't work on the image in Elements because a dialoge box says it’s not adequate size (or something along those lines).
What is the precise error message? PSE 6 or 7, Windows or Mac?

Problem with nef files from my d5100 using cs4

I have cs4 I also have a nikon d40 and I just bought a Nikoin D5100 I cannot see the nef pictures using bridge cs4 how do I fix?

The DNG conversion in Bridge will only convert files that your version of Camera Raw already supports. You will need the latest version of the freestanding DNG converter program which is free and available from Adobe. I'm going to assume that you are Windows user. Here is the link to the Windows version of the program:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
You need to download the program and install it and run the program. It is not a plug-in, and it is not part of Photoshop, Bridge, or Lightroom.
Just one word of advice. When you start the DNG converter you will be prompted to choose a FOLDER containing raw files. Be sure to just choose the folder, but don't open it. If you open the folder the DNG converter will tell you that there are no compatible files. If you want to convert just a single file, drag/drop that file onto the icon for the DNG converter. The program will start, and the conversion will take place.
Incidentally, I am 70 years old, and on the verge of retirement myself. I understand your situation completely. If you have any further questions about how to use the DNG converter, or whatever, feel free to ask. There are a bunch of very helpful people here who can get you through just about any problem.

Problem with a thumbnail 600x600

Hello, my problem is with a videos having a thumbnail 600x600. When I sync my IPAD, the thumbnail don´t display into ITUNES, but in Windows or other software, the picture display normally. What´s happen?

The right question is
Hello, I have problems with videos having 600x600 pixels thumbnails. When I sync my Ipad, the thumbnails don't display inside the Video player, but in Itunes for Windows and in other softwares, the thumbnails display normally. What's happening?

Problem with newly installation of Bridge

I can not get a newly installed Bridge program to connect to the internet, update or display thumbnails. CS6 runs fine as does Camera Raw. This is a new computer running Windows 8.1

Right, just icons with the NEF designation and none of the Meta data from the file. I run Bridge (which in my opinion is a lot more than a file cabinet) all the time on another computer. I am aware of the Help - Update command, but when I try to perform an update I get an error message that I am not connected to the Internet (which I am) and that my user does not have admin privileges (which it does).
I appreciate the help. Please give me anything ideas or I'll have to suffer through the Chat help on Monday.
Thanks

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

Problems with Image Processor in Bridge CS5

I just installed Photoshop and Bridge CS5, and I'm having a couple of problems. First, I can't update to Bridge 4.02. I've downloaded the installer and tried to run it, but I get an error message. All it says is that it can't run the update. The same thing with the Camera Raw updater. The most immediate problem I'm having is that Image Processor in CS5 seems to run differently from how it runs in CS4. Specifically, if I select a bunch of files in Bridge, and ask Image Processor to run an action on them and save to the same location, which is what I've been doing ever since CS2, it opens the files in Photoshop, and leaves them open. This means that pretty soon I've got far too many fiiles open, and my Mac can't cope with it (an iMac Core Duo 2.16Ghz with 4 GB of ram). It also gives me an error message at the end saying it can't process the relevant files, even though it has processed them! In previous versions of Image Processor, it would open the files to run the action, convert to sRGB, etc. and then close each one after saving it to a new folder named "JPEG". How can I get the latest version to behave like this?

Nevermind... I restarted Flash and it miragically appeared! Yay CS5!

Problem with Preview panel in Bridge CS3

Hello,
I've got a problem and I don't seem to get rid of it.
When I use the Adobe Bridge, everything seemds to work fine, EXCEPT... for the preview panel.
It just keeps on showing a 'blank gap' or blank window, from where I can see a part of my Desktop through.
I hope this picture makes it more clear.
http://i36.photobucket.com/albums/e39/Stef_r/2009-02-08_000747.png
Als, when I select a photo in Bridge, it doesn't show up in the preview panel. It just keeps on showing the freezed picture of the part of my desktop.
I use Windows Vista on my laptop now, and that's were the problem is.
On my old XP laptop, with much lower performance, it worked fine under Windows XP.
http://i36.photobucket.com/albums/e39/Stef_r/2009-02-08_000843.png
Does anyone recognise this problem or has a solution for it?
I have allready tried reinstalling both my laptop with Vista as wel reinstalling the Adobe suite.
Thanks for the responce!
With kind regards,
Stefan

Thanks for the replies!
Although I still haven't found the real problem for it, the preview panel keeps on freezing, I do have a wokaround found for it.
Because I have a docking station for my laptop, with some free slots in it, I bought a second hand Video Card with 512MB and better performance than the on-board card in the laptop.
I hooked up a external LCD monitor to it and now it works just fine, with no additional modifications in Bridge.
So, although the Bridge / video card still occurs on the laptop, I don't mind working this way.
Maybe a newer driver in the future will solve this problem.
Kind regards,
Stefan

Problem with NEF thumbnails in Bridge

Similar Messages

Maybe you are looking for