Problem with netweaver developer studio for sp9

Hi,
Presenty we are on ep6 sp10 and we have downloaded dev studio for sp9 which is available on sdn.we have j2sdk1.4.2_06
the problem is that when i deploy a par file from netweaver and try to create an iview based on that par it gives me the following error
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.navigation.ToolAreaiView.
Exception id: 04:25_03/03/05_0005_4061050
See the details for the exception ID in the log file
The strange thing is that if i use ep6 sp2 dev studio it works fine. So is there any problem with sp9 dev studio?

I think that with NWDS the SP of the portal and NWDS much match.
Hope it helps,
Patrick.

Similar Messages

  • Problem with NetWeaver Developer Studio

    I have NetWeaver Dev Studio 2.0.9 installed. I have JDK version 1.4.2_11 also. The environment variables are all set properly.
    I can create a new Java project without problem, but any time I try to create a new "Portal Project", I get a "Invalid Project Description" error. I also get this same error when I try to import a .par file. The project paths are named differently from the file names, etc.
    I have uninstalled all JDKs, JREs, etc, and uninstalled Netweaver and reinstalled everything, to no avail.
    Any assistance in this matter would be most appreciated.
    thank you,
    K.

    Hi
    To solve your problem you need to copy all your workspace contents to some other place .
    Uninstall your NWDS & Delete all the previous Workspace.
    Reinstall NWDS & it will work fine .
    All The Best
    Priyanka
    Do reward Points.

  • Netweaver Development Studio for EP 6 on NW 04 (SP9)

    I am looking for where the components of the SAP NetWeaver Development Studio for EP6 Stack 9 (soon to be 11) are located.  I would also like to find out where the installation guides for the components are located too.
    I have looked in the forums and found others have had this problem but the links supplied were either to other forum threads leading to other forum threads, etc OR they were links to pages or locations in SDN or Service Marketplace that do not exist and have no re-direct.
    Thanks you.  I have the laptop to hold this coming tomorrow but no software.
    Thanks,
    Rich

    Hi Rich,
        You can download netweaver studio from service.sap.com. Use the following link.
    https://websmp103.sap-ag.de/~swdc/011000358700003540862004D/JIDE07_0-10002804.SAR?_ACTION=DL_DIRECT

  • Netweaver Developer Studio for ABAP based on Eclipse

    Hi together,
    on TechEd in Las Vegas I saw a quick presentation about developing ABAP in Eclipse. It looked very promissing.
    Unfortunately I haven't found the Netweaver Developer Studio for ABAP.
    Do you have any further information about the availability of this tool?
    Many thanks and best wishes,
    Marcus

    Saw it on TechEd in Madrid. It's not out yet... it's promissing but in someways also disappointing. But yeah it's in beta stadium

  • Help With Netweaver Developer Studio Version

    Hi everyone I have a problem, I am doing some examples to programmer Web dynpro using netweaver developer studio, How can I know what is my Netweaver Developer Studio version? Because I have a trial version and I dont know if my version is compatible to doing some examples, for example I found this link
    Web Dynpro Java Tutorials and Samples NW 2004
    and I wanna doing the example "Using EJBs in Web Dynpro" and when I open this document it starts with SAP netweaver 04 and I don't know if my trial version is compatible with this example.
    Thanks

    Israel,
    Open your NWDS, go to Help/About.
    Most likely you will see something like:
    Version: 7.0.11
    If version is 7.0.X, your NWDS is NetWeaver 7.0, formerly known as NetWeaver 2004s.
    Most likely there will be no problem running examples from NW 2004, earlier version.
    Just make sure your JDK you have on your dev computer has similar version as JDK on the target server, if you are building locally and deploying your application to another server.
    Post if you have a different version.
    We will guess what NW version it belongs to.
    Regards,
    Slava

  • Can't create portal application project with netweaver development studio

    Hi All,
    I want to follow the toturial (http://help.sap.com/saphelp_nw04/helpdata/en/9e/7d96f7087311d7b84600047582c9f7/frameset.htm) to create a portal application with netweaver , but I am failed at the first step, I can not found "Portal Application Project" option by new->other.
    the version of netweaver development studio I am using is
    Version: 7.2.0
    Build id: 200702220224
    do I need to install a plug - in? if yes, anyone can tell me where to download it?
    thanks & regards, Bin

    Hii...
    In NWDS goto Windows> Open Perspective> others--> Enterprise portal select this and ok....
    Goto File> New> Project> select Portal Application> enter project name and click ok...
    refer this blog also...
    Overview of the Content Development Process
    regards,
    Chinnadurai.R

  • Netweaver developer studio for linux

    Hi
    I am looking for Netweaver developer studio trial version for linux OS.i couldnt find any downloads.
    Please let me know the link to download the trial version.
    Thanks
    Mani

    Hi,
    As per SAP note 1225606, it looks like Developer Studio is not available for Linux environment.
    Thanks
    Sunny

  • Problems Installing Netweaver Developer Studio 7.0 SP 15

    Hello friends,
    I have currently NWDS 7.0 SP9 installed. I need to install NWDS 7.0 SP15. For that I have downloaded the JIDE15_0-10003480.SAR file from Service Market place. I don't know what to do after that.
    Please can anyone help me on this.
    Points guaranteed.
    Thank You
    Avik

    Hi,
    SAPCAR is a executable. you can find it in \usr\sap\<SID>SYS\exe\run.
    You can execute the "sapcar -xvf <filename>.car"
    Note:
    Using JSPM we can deploy the sar file.
    For JSPM , no need to uncar the file. It will directly uncar and deploy it.
    Try with JSPM to deploy the SAR file.
    Regards,
    Bala.

  • How to use Servlet 2.4 with Netweaver Developer Studio 7.0?

    Hello,
    When I define my web.xml as follows:
    <!DOCTYPE web-app version="2.4"
    xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
    I get an error in french: "La DTD du type de lélément racine "" doit se terminer par '>'."
    Saying that the DTD of type of root element must end with '>'     
    How can I solve this error?
    Thanks for your help,
    Tanguy Mezzano

    Hi,
    Tanguy Mezzano wrote:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app version="2.4"
    xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" >
    There is a  " (double quote missing in the xsi:schemaLocation attribute. This is the reason. I am guessing that you may have tried manually editing this web.xml file and may not have correctly edited it.
    To correct the <? xml ?> and <!DOCTYPE> tags - please openup a blank Web Module Project and copy these two tags only from the web.xml and overwrite the same tags in your web.xml.
    Hope that this helps.
    Thanks.
    p256960.

  • ISA Extention  and SAP NetWeaver Developer Studio

    Hello all,
    Does anybody know how can I use the SAP NetWeaver Developer Studio for modifying (Extension) the b2b isa application starting from (war) or (ear) files. ?
    Thanks,
    Djamel

    Djamel
    I assume that B2B application is already running in the Server .
    1. Create a <b>Web Module Project</b> in the NDWS.(File --> New --> Web Module Project)
    2. Select the Project Name, right click --><b>Import</b> --> Browse --> Select the <b>ROOT</b> folder of the B2B Application already running <b>in the server</b>. <b>Check Mark</b> on the root.
    3. Click  <b>Finish</b>  .
    This creates the Customer B2B Project for you  in the NWDS.
    Also , its worth to have a look at the follwoing threads
    <b>(CRM-) ISA-developers: How do you work with NWDS? which deals with the most of the problem & solution for the problem & how do we achieve it. Its a good start.
    Thanks
    Jack
    <b>PS: Allot points for all worthful postings</b>
    Message was edited by: Jack

  • ResourceBundle error in NetWeaver Developer Studio MI 2.5 SP16 Patch 3.

    SAP NetWeaver Developer Studio
    Version: 2.0.19
    Build id: 200610270428
    MDK Mobile Development Kit Tools v2.5.13
    Java: j2sdk 1.4.0 Win
    Mobile client: MI 2.5 SP16 Patch 3
    Running MAU v1.0 SR 5
    Downloaded:
    MAM FOR UTILITIES 1 0 SP05 05042006
    In the SAP NetWeaver Developer Studio I imported the MAU_eclipse.war from MAM FOR UTILITIES 1 0 SP05 05042006 using the MDK as MAU.war.
    Yet, without implementing any changes, just to test, I exported the MAU project into a war file in the following path: C:\Program Files\SAP Mobile Infrastructure\webapps\MAU.war.
    I renamed the existing folder C:\Program Files\SAP Mobile Infrastructure\webapps\MAU to MAU_Old
    Then, I started MAU from within the NetWeaver Developer Studio by selecting Run, Run.
    The client application launched and the new MAU.war file was automatically unpacked C:\Program Files\SAP Mobile Infrastructure\webapps\MAU
    The application opens and can be successfully logged into from the SAP NetWeaver Developer Studio.
    When the MOBILE ASSET MANAGEMENT FOR UTILITIES link is selected in the client application, error messages appear for example.
    See below for the full error messages.
    It appears the errors below might be somewhat straightforward, mentioning that the resource bundle could not be found.
    Please assist regarding how to ensure the resource bundle can be found and properly loaded for example or what else could be the issue.
    Please note that the application opens and can be successfully navigated by launching and logging into C:\Program Files\SAP Mobile Infrastructure\MobileEngine.exe directly.
    The issue is launching from within the SAP NetWeaver Developer Studio for running or debugging.
    Thanks in advance for your assistance.
    Error in the console for the SAP NetWeaver Developer Studio:
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key dispatcher.forwardException
         at java.util.ResourceBundle.getObject(ResourceBundle.java:314)
         at java.util.ResourceBundle.getString(ResourceBundle.java:274)
         at org.apache.tomcat.util.StringManager.getString(StringManager.java:136)
         at org.apache.tomcat.util.StringManager.getString(StringManager.java:155)
         at org.apache.tomcat.util.StringManager.getString(StringManager.java:194)
         at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
         at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
         at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
         at 0002fmam0005fstart_0002ejspmam_0005fstart_jsp_0._jspService(_0002fmam_0005fstart_0002ejspmam_0005fstart_jsp_0.java:62)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.jasper.servlet.JspServlet$JspCountedServlet.service(JspServlet.java:130)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:282)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:429)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:500)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
         at org.apache.tomcat.core.Handler.service(Handler.java:287)
         at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
         at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
         at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
         at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
         at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
         at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
         at java.lang.Thread.run(Thread.java:536)
    Error on client is below:
    Address: http://localhost:4444/MAU/start
    Error: 500
    Location: /MAU/home/home_mgmt.do
    Internal Servlet Error:
    javax.servlet.ServletException: cannot find message associated with key : dispatcher.forwardException
         at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
         at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
         at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
         at 0002fmam0005fstart_0002ejspmam_0005fstart_jsp_0._jspService(_0002fmam_0005fstart_0002ejspmam_0005fstart_jsp_0.java:62)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.jasper.servlet.JspServlet$JspCountedServlet.service(JspServlet.java:130)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:282)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:429)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:500)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
         at org.apache.tomcat.core.Handler.service(Handler.java:287)
         at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
         at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
         at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
         at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
         at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
         at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
         at java.lang.Thread.run(Thread.java:536)

    Hello,
    MDK plug in is as bad as NWDS itself. Since the mobile applications are really just a java application, you do not need special plugin for developing them. I STRONGLY suggest to take a look at this blog entry I did when I was working on MAM at SAP:
    How to set up NWDS or Eclipse without MDK
    Thank you,
    Julien Guimont
    msc mobile Canada inc.
    http://www.msc-mobile.com

  • Netweaver developer studio and support package

    we use JDI and netweaver developer studio for webdynpro development. when we upgrade satellite systems to latest sp, what should we do with developer's pc (j2ee engine and developer studio)? if we upgrade them to the same latest sp as in development satellite system, we will be compatible with development, but what about production system support? production will still be at the current old sp version. do we need another developer pc to support the current development on current sp?
    Thanks
    Jane

    HI,
    Its better to maintain WAS.NWDS and JDI on same SP level to avoid conflicts between different SPacks.
    Recently there is a blog on the same on SP levels.
    /people/marion.schlotte/blog/2005/10/25/jdi-software-vs-jdi-content
    hope this helps you ..
    Refer this note 790922 will be able to help you
    Regards,
    RK
    Message was edited by: Ramakrishna Venkat
    Message was edited by: Ramakrishna Venkat

  • NetWeaver Developer Studio - error

    When working with NetWeaver Developer studio (NWDS), sometimes we get an error which says <b>"An error has occurred. See error log for more details."</b>
    No further details are given. Which error log is it referring to? Where can it be found?
    Thanks in advance!!!

    Sandeep,
    in your NWDS select menu Window->Show View->Other and select PDE Runtime/Error Log in the dialog.
    Regards Stefan

  • Netweave Developer Studio 7.0 Vs Netweaver Developer studio 7.1

    Hi all
    Can anyone tell me the difference between Netweave Developer Studio 7.0 and Netweaver Developer studio 7.1?
    are there any documents for the same?
    Regards,
    Sheetal

    Hi,
    Three main parts are added to NW 7.1 surrounded business process platform: Composition Environment (CE), Enterprise Services Repository (ESR) and NetWeaver Process Integration (PI).
    Composite applications (composites) are functioning service-enabled interfaces to existing backend systems. NW 7.1 is coming with tools to develop, run, and manage composite applications using SAP's enterprise SOA. This is based on enhanced technologies like:
    SAP NetWeaver Application Server for Java
    Web Dynpro
    SAP NetWeaver Developer Studio for service creation and provisioning
    Service Registry and repository for service management
    Guided Procedures for process modeling
    SAP NetWeaver Visual Composer for UI modeling
    SAP Composite Application Framework for Java business object modeling and service abstraction
    Enterprise Services Repository is SAPu2019s web services repository.
    NetWeaver Process Integration (NWPI) is next generation of SAP Exchange infrastructure (XI) kind of integration hub; handling integration between SAP/non-SAP applications
    Refer these links for more info:
    http://help.sap.com/saphelp_nwce10/helpdata/en/45/3c66688c604c2ce10000000a1553f6/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50289b6a-5373-2910-91bd-b8196737c026
    Regards,
    Swathi
    Edited by: swathi suresh on Sep 8, 2008 6:59 AM

  • Configuring adobe live cycle designer in netweaver developer studio

    Hi,
    I installed Adobe Life Cycle designer 7.1 on Studio for NW04S SP9 , I open up the interactive forms ui element .
    Then I opened the library pallete on the studio, but I dont find the webdynpro tab.
    What should I do.
    Thanks,
    Harish

    Hi Amol,
    I have done this but to no avail.
    I picked the prerequisites from help.sap.com
    Let me know what I have missed:
    <b>You have installed the SAP NetWeaver 4.0 Developer Workplace. You must also have Acrobat Reader 7.0 or a full version of Adobe Acrobat 7.0 if you want to use the InteractiveForm UI element. In addition, the Adobe component of the SAP NetWeaver Developer Studio must be installed as this component is not installed in the standard version. However, it is very easy to install it if you want to use interactive PDF forms.</b>
    The above is the prerequisite in help.sap.com
    What I have done is
    1. Downloaded Netweaver Developer Studio NW04S SP9 , from service.sap.com
    2. Downloaded Adobe Life Cycle designer 7.1 from service.sap.com
    3. I run the aldsetup.exe
    Let me know what else needs to be done
    Thanks,
    Harish P Subramanian
    Mobile : 9903306035

Maybe you are looking for

  • Problem with JFrame resizing at runtime

    Hi All, I have a problem with resizing the JFrame at runtime. Even if i resize the JPanel. It is not affection on all the components over the frame. How can i solve that I am using AbsoluteLayout(jre1.6) and here i am going to provide you code snippe

  • How do I create a second iTunes account on my mac?

    We ahve purchased 2 iPhones, one 4 and one 4s, to instal we need to connect to iTunes but need 2 different accounts and only have one mac that we share at the moment. Any ideas on how this can be done?

  • Need a currently active printer code

    Unable to add printer to a second computer as the time limit had been reached. ... Please expedite

  • X1 Track Pad issue when used with ultraslim powersuppl​y

    This is a really strange issue,  Anyone else having it? X1 I5 160Gb SSD 8Gb Ram  Mix it with a Ultra slim PSU (41R4538) and the track pad starts playing up intermittently.  Unplug the PSU and it works fine.  Use the native PSU and it works fine.     

  • I just reinstalled tiger and Now my firewire drives won't mount

    Here's the deal: I just reinstalled Tiger 10.4.2 on my G4 sawtooth and now my firewire ports are gone. When I look at the Firewire bus in System Profiler, I just see the words: "Firewire Bus:" An that's it. I have seriously searched thes forums and h