Problem with network connection

Hi there,
I just installed Solaris 8 on my P-III machine with 256mb RAM. My network is fully supported by NT servers & machines. I chose to have dynamic IP thro DHCP. The network card present is 3COM. The machine boots up normally, gets an IP address & even telnet is possible from outside. But after a while, the connection dies all of a sudden. I am not able to connect to the server from outside or connect from the server to outside. When I restart the machine the cycle repeats.
Though the "ifconfig -a" shows that there are 2 interfaces (network card & loopback)with the IP unchanged even after the connection goes.
Seeking your help,
PTBabu.

calling your ISP is actuallyl a good solution, basically a router just depends on the internet connection distributed by the ISP, if it drops then connection in the router would also drop...
but if it has no problems, you can try upgrading the firmware of your router and try to configure it at the same time..

Similar Messages

SAP Screen Personas error "A problem with network connectivity has been detected"

Hi,
We just installed Personas release 100 SP02 and performed the
configuration steps necessary. But when we acces the url and logon to
personas we get the following erre
A problem with network connectivity has been detected.
Please check you connection and refresh your browser.
Any help to solve this issue would be appreciated.
Best Regards.

Please use this checklist to see if everything is correct:
1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
2. SPRO -> Sap screen Personas -> Maintain system has
       - 3 letter system id
       - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format
       - "Service.Uri" without typo and value as /restgui
3, Note 2026487 is installed
4. If target system is different from source system then you are able to access the following
         - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
         - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
Thanks
Chinthan

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.

Windows 10 for phones emulators on Windows 10 10041 - problem with network connection

Hi,
I can't connect to Internet on Windows 10 mobile emulators on Windows 10041. I have tried to resolve problem. First I noticed, there was problem with displaying properties main network connection. I had reinstalled network driver. After that I reinstalled
Hyper-V on Windows and recreated virtual machines for mobile emulators. Nothing helps.
On the same machine Windows Phone 8.1 emulator on Windows 8 has access to Internet.
I don't know if there was issue which is discribed
http://blogs.msdn.com/b/wsdevsol/archive/2013/10/01/why-can-t-the-windows-phone-emulator-go-online.aspx, becuse the same configuration I have on Windiows 8.1 and Windows 10 and on Windows 8.1 I have access and on Windows 10 I haven't.
Martin

I just disabled bluetooth connection in Network Connections panel and I have access to Internet in Windows 10 emulator!

Problem with network connection names and cluster

Hi,
Before talking about my problem, I want to apologize if this is not the correct forum, but it is the more adecuated that I have found. Is about a problem in Windows 2000, which I know it is out of support, but in my company I still have to administer several
hundreds of them.
I have several Windows 2000 failover clusters, and all of them show the same problem, which consists of the following:
Each cluster has two nodes. Each node has 5 network adapters. Each adapter hosts a connection name: Lan-1 is the name of the network associated to adapter 1, Lan-2 to adapter 2, and so on till Lan-5 to adapter 5.
Lan-5 is used as heartbeat for the cluster: is connected to the Lan-5 in the other node via a cross-over UTP cable.
Lan-1 and Lan-2 in each node, forms a network team named TEAM, used to access to the nodes for administration via remote desktop.
Last, each node has Lan-3 and Lan-4. Lan-3 is used for the cluster resources, and Lan-4 as a backup, just in case Lan-3 fails.
And now, the strange and surprising thing: if I change the name of Lan-4, or change any configuration of the connection, the name changes to Lan-4(2). If I make any other change, the name changes again to Lan-4(2)(2). I can't get rid of the numbers between
parentesis, and the number of them grows and grows.
Any idea about what is happening?

Hi,
As you mentioned, the Windows 2000 has already stop supported, personal experience is you can try to use the cmdlet ipconfig /all to show if the network adapter name is right
or not, or you can try to remove the lan3 adapter register information (backup first) and driver then restart to monitor the status
More information:
How to remove network adapters from the registry
http://support.microsoft.com/kb/146333/EN-US
Manually Removing Network Adapter Entries from the Registry
http://support.microsoft.com/kb/146333/EN-US
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

Facing problems with network due which the phone goes into hangs status

Facing problems with network due which the phone goes into hangs status. some one help me with switching between 2g and 3G network

Hi Mani Nair,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
iPhone cellular data connection issues
Regards,
- Brenden

I have problem with Access Connections on L412 after that utilyty upgrade

I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place.

Problem with wifi connection

Hello everyone i'm new user of BlackBerry and i must say it's great phone
but I have a one little problem with wifi connection:
when i open "Call Management" and turn on wifi connection, find my home router network and connect with it- i have not green hook like with my telephone connection but only white minus
Sou I think BB find my wifi connection but can't take internet from router?
I had only one time working connection, but next day it lost
The same problem i found on other forums but no one know how to solve the problem.
Please help me solve this problem.
ps: sorry for my english hope all is understandable
Regards

I, too had problems connecting my iTouch with my home computer. I did everything suggested and then called Apple. They worked very hard for me to find the problem ... even the engineers got involved. They found that the Symantec firewall downloaded from my ISP, Comcast, interfered with the iTouch communicating with the computer. As soon as I disabled the Symantec wall (not the internal mac firewall) my iTouch was back communicating with my computer. Apple deserves a lot of credit for isolating the problem. So, for those of you with this problem, check out your third party security software and remove what you must. Kudos to Apple customer service on this one.

Problem with wifi connectivity

I am facing problem with wifi connectivity of iPhone, on status bar it displays full signal however it does not opens even a single window whenever I try to surf internet on it.
I have internet connection which is having speed of 2mbps, its really irritating when iPhone keeps on processing while same thing opens on PC within fraction of seconds. Any idea about this, how to solve this issue?

Tap Settings App > General > Reset > Reset Network Settings. Then relog into Wi-Fi.

Problem with dropped connections...

Hi,
I'm having a problem with dropped connections. Let me explain...
I have a computer with Windows XP SP3 where I have installed Toad, PuTTY and Oracle 10g client. I need to connect to several database and Linux hosts and have a strange problem. What happens is the following:
1 - When I arrive at a customer location, I boot up my computer (I'm not using hibernate or standby) and plug-in to the network.
2 - After I login to Windows, every session in PuTTY (to Linux), SQL*Plus or Toad (to database) gets dropped after only a few seconds.
3 - I reboot my computer again, and everything works fine.
I have no explanation for this beahavior. This happens across different customers, database versions and Linux OS kernels and versions. It seems to be related to something in my computer that is fixed on the 2nd restart.
Has anybody experienced any similar problem?
Thank you!

pmcatarino wrote:
I plug directly at client's site.
And I can access the web and messaging on the first reboot... the only thing that appears to be malfunctioning is putty and toad as I stated above.
Edited by: pmcatarino on Oct 24, 2008 6:25 PMDoes that mean you can ping to the server without problem when putty and toad having problem?
If you install an Oracle client on your machine and configure TNS, will the sqlplus drop as well? Or download and install SQL Developer, see if SQL Developer having any problem connect.

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with network connection

Similar Messages

Maybe you are looking for