Problem with network scanning with Laserjet M1212nf All-in-one printer

I installed drivers for my network connected Laserjet M1212nf on my Windows 7 64-bit laptop computer, but it appears as just a printer (in Devices and Printers). I cannot scan from the laptop (I get a "no TWAIN Device Installed" error).
The scan function does appear (and work) if I connect to the printer via USB and install those drivers, but my laptop does not usually reside in the same room as the printer.
The scan function installs and works properly on a Windows XP desktop computer also connected to my network.
This question was solved.
View Solution.

Hi CW_Enloe
I will try this tool,
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/easy...
If it does not help please inlcude the model of the router you are using (Make sure that the router is running the lastest firmware) that may help was well.
Hope it helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Ink Cartridge problem with the 7525 all in one printer

I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged. also the ink levels on the new cartridges are not appearing full. they are all new HP cartridges.

The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Power problem with my 4620 all in one printer / scanner / fax

Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!

maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG

Printer: Driver Update Problem with HP 6700 All In One Printer

My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?

Hi,
I request you to try the following:
For network connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
For USB:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "
Kudos! Thumps Up" which is on the right
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Regards,
Ray

Printing problem with HP F380 All-in One printer.

My HP F380 All-in One has stopped printing in colour. Don't know if I've accidentally changed a setting but I've unchecked 'Print in grayscale' and no difference. Can anyone please advise.

Hi there,
Welcome to the HP Forums!
I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I have a problem with my c4599 all-in-one printer

Hi. My c4599 printer is stuck offline. I have tried to go to the printer window and click the use printer online command and the icon says it is still offline, but when i go back into the window it asks is i want to switch the printer to offline. Am at a stand still and not sure what to do.

Hi all,
Make sure to remove the current software by going to Start > All Programs > HP > HP Photosmart B210 > Uninstall..
Then go to Programs and Features and remove any remain item of the printer, any item should beging with HP, as well you may see the Read Iris software..
After uninstalling the software reboot your PC, download and install the updated software version below:
http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-2/PSB210_1315.exe
I believe the problem should be resolved,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IPod Touch conflict with HP 6500 All-in-One printer...

Does anyone know of anyone who has an iPod Touch installed with an HP all-in-one printer and running under Windows 7 64 bit? If so I'd like to hear from them and see if I can pick their brains a bit. In fact, I'd like to hear from anyone who has an iPod Touch working with an HP all-in-one on a desktop system, no matter the OS.
Originally I tried to get them to work together under a 32 bit Windows 7 Premium build on an MSI G31M3-F V2 mobo but couldn't get the iPod and the All-in-One to work together. Either the iPod wouldn't synch or the printer would disconnect.
Yesterday I started with a Windows 7 Ultimate 64 bit build on an Asus P5Q-EM mobo with just the HP 6500 All-in-One and the printer and all of its functions were working perfectly.
Then I plugged in the iPod, after having installed the newest 64 bit version of iTunes, and it detected the device but wouldn't complete the driver installation. I powered down the HP 6500 and the iPod installation completed.
I then turned the printer on and it appeared to work but the iPod wouldn't complete the sync process unless I turned the printer off.
Then I changed the drive letter of the HP all-in-one's integrated card reader from "E:" to "G:" and rebooted and it appeared that everything was working. I brought the scanner up but didn't actually scan anything but, still, no disconnect messages. Finally, success I thought. Silly me...
Today my daughter tried to send a fax from the computer. It started the scan, stopped after only partially scanning and said that the printer was disconnected.
She then rebooted and tried to scan a photo and it did essentailly the same thing -- a partial scan, froze, and then reported the printer offline.
Uninstalling the iPod Touch device resulted in the printer coming back online and all functions working perfectly.
There is clearly a conflict at the device/driver assignment level and I don't know if its even anything that I can fix.
This should not be this hard.
Has anyone any experience with the iPod Touch running on a desktop that also has an HP All-in-One device installed?

Finally installed a completely new OS and then, before doing anything else, installed iTunes and connected the iPod. Installed everything else with the HP printer being the very last thing.
Wa La... Worked as advertised...

HT3669 can I use PRIZMO with Lexmark Pro901 all in one printer scaner?

EVER SINCE I PURCHASED A LEXMARK PRO901 ALL IN ONE PRINTER I HAVE HAD NOTHING BUT PROBLEMS EVERYTIME I DO AN UP DATE ON MY MAC OR LEXMARK PRINTER THE SACNNER FAILES TO WORK I PURCHASED THIS PRINTER BECAUSE I WAS TOLD I COULD EDIT DOCUMENTS I SCAN USING OCR BUT THIS HAD NOT BEEN THE CASE MOST RECENTLY I AM TOLD LEXMAR WILL NOT WORK WITH OSX 10.8 SO NOT MY ALL IN ONE PRINTER IS A PRINTER THAT IS USLESS TO ME.

Which printer drivers are you using? I had a real problem with one of these after an upgrade to 10.4.3 that required an archive & install of the OS and a reinstall of the printer and scanner drivers before it would work properly so I suggest you try that first.

Can anyone help; re: Faxing problems with my 6200 all in one

Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
when a fax is being received or when we are sending one. When the fax fails and we stop the blinking lights, it self tests then turns off. Sometimes when it does this we get an error message printed that says "Power Failure." The party being faxed gets 1/2 a fax or 1 page out of 5. I'll unplug it from the electric and plug it back in and then it will work fine for a day or two. We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't. We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
Any ideas??? The machine is 5 years old and has never given us any trouble until now. Is it time to upgrade?
Thanks so very much!!!!
Joanne

I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA, using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

Airport extreme base station with Hp 3210 all in one printer

Just bought and hooked up the above. Using with iBook G4. Still dealing with dial-up unfortunately, but got online just fine. When I tried to print on the above, it immediately dialed up when I hit "print". ?? What's going on?

I have a pretty old HP all-in-one (G55) printer/scanner/copier device. Plugging it into my AEBS seems to not let me print to it. I have the most recent driver from HP.
Do you think it's my setup, or is the AEBS somehow not compatible with the older HP devices?
No the problem is with the HP driver.
Try using the HPIJS drivers.
For those with the older base station.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Also, is it possible to fax, scan, etc through an all-in-one device plugged into an AEBS?
No, not via the USB port.
Can I scan using my all-in-one when it is connected to the USB port of an Airport Express or Airport Extreme Base Station?
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

Printing with HP PSC1210 All in one printer

Hello all,
Anyone out there had any luck finding a driver for the HP PSC1210xi all in one printer with Snow Leopard? I had basic printing functionality under Leopard and would just like to have the same under Snow Leopard. As a workaround, I am able to still print and scan just fine using Windows XP running in VMWare Fusion, so, I am not dead in the water. However, I would like to just get basic printing capability restored in Snow Leopard.
Thanks all.

OK, so I have some bad news. FIrst, unfortunately the print drivers for the PSC1210 are not available yet. They will be available at some point in the future through an Apple Software Update. Second, since HP never posted a 10.5 driver package for your device, there is nothing for you to download to try to get things at least functioning.
That being said, you may have some luck with the Gutenprint drivers or others. There isn't a driver specifically for the PSC 1210, but the one for the PSC 1215 may work.
HP is aware of the problem, and I know I am trying to do everything in my power to solve it as soon as possible.
Just trying to help.
Andrew

Print Too Small from Photoshop CS4 with HP 8500 All In One Printer

I'm running Windows XP with CS4 and latest patches and drivers. When I print an image to my HP 8500 All in one printer, the printout is too small. Instead of a centered 4 x 6 image on the page I get a 1 x 1-1/4 inch small print of the image in the upper left hand corner.
I re-installed CS3 and it works perfectly as do any other print options, such as word, etc. But from Photoshop CS4 I can find no way to print to this printer without the image shrinking in size. If I print to another printer at the same sitting, the image is fine. So it's a PS CS4 vs. HP 8500 unique problem I guess.
I've see this post in other forms and no help as yet. Does anyone have this one on their radar. I really like this printer, but it's quite annoying.
By the way, If I print to a PDF from PS CS4, the pdf file image is fine. That's another end around for printing also. HMMMM.
I did contact HP and they put the problem squarely back on Adobe. No partnership there.
Thanks,
Glen

Will the printer print from any app?
I know it sounds like a dumb question, but you didn't actually say... And I admit to looking for software problems on an occasion or two when I had forgotten to plug in cables.
-Noel

Trouble with findig printer with Bonjour (HP all in one printer)

Hi,
I have a problem with connecting to my HP Printer.
When the printer and the iMac is booted freshly I can connect to the printer without any problems, also I can find the printer trought the printer browser via Bonjour.
But after a while the connection is completely lost with the printer, the only way I can connect to the printer is by IP, the dns name (http://HPxxxx.local.) is also not working anymore.
The only solution is turning off the printer and putting it on again, even sometimes I have to restart the iMac.
Is it possible a new installed wireless modem/router is cousing this odd behaviour ? Because it looked like the trouble whas coming after the new router was installed.
When I ping to the printer I can see there are some timeouts from time to time and when the timeouts take too long, the result is that I can't find the printer trough Bonjour anymore.
Thanks!

Hi cowla1,
I understand you need the drivers for the HP 6500A on a Mac. I can help you but will need some more information.
I have provided a link for the drivers up to 10.8. The 10.9 drivers show the documentation to run the Apple Updates for the driver install. HP Officejet 6500A e-All-in-One Printer - E710a Drivers.
Select your operating system, click next and click on the software to download and install.
Make sure when you add the printer, it shows the printer name and not the printer name + Airprint.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet/Wireless)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am not able to connect with my Epson all in one printer

I am having Epson All in one printer which is being installed on my HP notebook. However, i am not able to print from this notebood as it says communication port is not available. I am able to scan, but can't able to print. My operating system is Windows 7 home edition. Please help me to resolve the issue.

What happens when you try?

Airprint with HP C4180 All-in-one Printer

I am currently thinking about upgrading my iPhone 3GS to the 4.2 software and undecided. If I do so, would I be able to print from iPhone to my HPC4180 All-in-one Printer?
In order to use Airprint, do you have to have an Airport?
Thanks in advance.
Message was edited by: itsybitsyskier

I think this page has the answers you are looking for:
http://support.apple.com/kb/ht4356

Problem with network scanning with Laserjet M1212nf All-in-one printer

Similar Messages

Maybe you are looking for