Problem with new computer booting for xp install.
I just built a new K8N Neo today with a 3000+. The computer POSTs fine and I can start the install of xp. Setup will copy the files over and then reboot. When the computer reboots, I get the error "cannot load operating system". Ive tried all kinds of things, new cables, change jumpers around, 1 hard drive, 2 hard drives but I always still get the same message. I dont know what else I can do. Theyre just regular ATA100 drives and I have them on IDE1 while the DVDRW is one IDE2.
I tried resetting the CMOS also. Does anyone know how to fix this?
Ecerything is still a bo go. I dont understand this at all. The bios detects the hard drives because I can read their specs within the bios. Tried to fix the MBR and that didnt work. Im really at a loss here. This is my first MSI board and im not too happy with it so far.
Similar Messages
-
Install problem with new computer
I just got a new computer (Mac Pro) today. My Final Cut Studio 2 refuses to install. It says my serial number is wrong (it's not). But my Final Cut Studio 2 software was an upgrade version. Do I have to install my old original FCP 4 first and then use the Final Cut Studio 2 disc to upgrade it? Will FCP 4 even install on Leopard? Please pardon my ignorance! And thank you in advance.
If it's an upgrade version of FCS 2 then it is looking for a previously installed version of FCP on the system. You may need to install an older version first.
-
Permissions problem with new SSD boot drive
I recently installed an OWC SSD drive as a boot drive on an iMac I've had for many years. I’m having some sort of permissioning error that I can’t figure out how to resolve.
I’ve setup the SSD as the boot drive (created user named “Boot Admin”). 10.9.3. All data and files remain on my old spinning disk
When the computer first boots, as expected, I’m presented with 2 users at the login screen (“Boot Admin”; Original User Account). If I choose my old user account, I receive the following error:
"You are unable to log in to the user account “<name of original user account>" at this time. Logging in to the account failed because an error occurred.”
If I choose the Boot Admin user I’m able to login without issue as the Boot Admin user (no access to my original apps and data). At that point, I can choose Log Out from the Apple menu and then login using my old user account. When I follow that sequence, I’m able to login with no issues. Apps are there, data is accessible etc. I can enjoy the speed of the SSD.
Although, if browse within Finder to the Boot Admin user on the hard drive, none of the folders are accessible (the little red icon is on the folders). Similarly, if I boot straight into the Boot Admin user and browse to my original User on the hard drive, none of its folders are accessible!
I am at a loss on how to troubleshoot. Ideally, I would like to login in directly to my old user account (eliminate the 2 step — login to Boot Admin, log out, login to Original User) and have full file access to things within both the Boot Admin user and my original user account.
Any guidance or tips on how to troubleshoot? thanks in advanceI appreciate the continued assistance. I'm clearly overlooking something and Google is not my friend! I've tried.
At the expense of repeating myself, I'll share my current configuration:
10.9.3
2 hard drives (new SSD with name "Boot Drive" and original spinning disk "Macintosh HD")
Startup Disk in System Preferences is "Boot Drive"
"Macintosh HD" has 3 User Folders: bootadmin, jayelevy, shared
jayelevy is my home folder - all my documents are in tact
bootadmin has the normal home folder structure
"Boot Drive" has 3 User Folders: bootadmin, jayelevy, shared
jayelevy is empty; no folders
bootadmin has the normal home folder structure (Desktop, Documents, Downloads, Movies, etc), but each is empty with the exception of Movies and Pictures. I've moved my Aperture databases to these 2 folders to take advantage of the speed of the SSD
When I restart the iMac I'm presented with 2 user choices: jayelevy and bootadmin
If I initially select jayelevy, I receive the error mentioned at the start of the thread
If I initially select bootadmin, I can login without issue, but get the standard Mac desktop (not my home).
If I then log out of bootadmin (not restart, but logout) and then choose jayelevy, the signin completes successfully and my desktop/home folder is restored to it's normal and expected condition.
I am still trying to avoid this step of login/logout/login.
I imagine I'm overlooking the obvious, but I'm in uncharted grounds for me! Here I thought the hardware swap to replace my optical drive with SSD would be the hard part. That was simple! I've stumbled on the software side! -
Problems with new fields added for tc MASS for material master data.
Hello to all.
We created new fields in MARA table and added to the process of the tc MASS. We made the following steps and it almost works correctly:
1-Add new fields to the object ZBUS1001, copy of bus BUS1001.
2-Add new fields to table T130F
3-Add new field to structure E1MARAM.
4-Add new fields to structure CL_MMH1.
5-Add new fields to structure MARA_TMP.
6-Created a function module to control that the new fields not filled in MASS have a "/" value.
If we run the mass for our objetct ZBUS1001 and put a new value or modify the value of new fields, the tc MASS works correctly.If we want to delete a value leaving the value empty,click to the carry out a mass change button and save the change, the system don´t delete the value and keep the first value.
Do you know what the problem is , and what step we didn´t make it.
Thanks in advance.
Edited by: tonnetti pablo on Feb 6, 2008 7:45 PMHi,
Check ZTERMDT is checked under Attribute list as below.
Hope it helps..
regards,
Raju -
Regarding problem with new line feed for DME file generation
Hello Experts,
I m facing a problem in the DME file generation.
we want each record in the DME file should be in new line. for that we have add the new line feed character in the each row end. So in the SAP output it looks ok, But if we download that file the carriage return field is coming in the end of every row.
can any one tell how to solve this issue.
Please refer the below line code which i m using for new line
DATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>CR_LF
You reply is valuable..
Thanks,
SureshDATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>newline.
-
Have purchased a new computer but can not install elements 12 since it has been installed on an older laptop. This is a one time user program, is there a code that can be put in or a small fee to pay to be able to use the program again. Never installed the video editing and hoping this can be installed with no problem.
If the laptop is still connected Launch Elements in Expert Mode. Go to the help menu and sign-out. That will deactivate usage on the laptop.
-
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570 -
I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was not accepted. Please help me install these two products; I prefer stand-alone, rather than a monthly fee. Thank you
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms but I still don't see "Agree" button to accept. Can you check help me this problem?
If it says 'Open' in the App Store, then it's on your device. What happens when you press the 'Open' button in the App Store?
The App is on your phone, somewhere. Use Spotlight to find it, or you can reset your Home Screen layout, and then you'll definitely find it. -
in my new computer when i have installed itunes i didn't find my buy.
i've buy many album.
where is my buy?
sorry for my english but i am italian and i don't speak it wellCopy the entire /Music/iTunes/ folder from your old computer to /Music/ on your new computer.
-
I have had nothing but problems since I installed the latest version of Firefox version 18. It hangs up my computer no matter what I am doing. Even if I am not using the browser. I uninstalled it three times and the problems just seemed to be getting worse. I finally uninstalled it and did not reinstall it again. I am not going to use it again until the problems are fixed. I also don't know what funmoods is or whatever it is that replaced my google home page. I don't like software deciding what services I should use. I have been a firefox user for over 15 years. I have never had problems like this before. I have switched to Safari. It works without interfering with the other tasks I am doing on my computer. I don't know what version 18 did but the previous version of firefox I was using was perfectly fine. I had no problems whatsoever with it. It appears as if this version was not sufficiently tested. Also my daughter is having the same problems with her computer and they all started with the new version. So it isn't just me. At least give us the option of going back to the previous version and asking us if we want to upgrade when a new one comes out. However, I have never had these problems in the past with any version of firefox I installed. I like the features of firefox but cannot afford to keep rebooting my computer. It seems that firefox gets hung up and then hangs the computer up and I can't do anything else even if I am not using it. It seems to stay on in the background and hang everything up. Please fix this.
It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.
-
It all started out when I got my nice shiny new iPod. I installed the latest 64 bit version of iTunes and connected my new iPod. First thing iTunes told me was that the iPod was corrupt and needed to be restored. I thought no big deal. The iPod is new with nothing on it so I had nothing to lose. The iPod was stuck in restore mode for about 8 hours and I gave up. I rebooted the computer and reconnected the iPod. Now iTunes could not see the iPod.
You may need to know that this computer is a newer Dell Studio XPS running the 64 bit version of Windows 7 Home Premium.
I followed all of the recommended solutions on the page for Windows not seeing an iPod. When it came to reinstall iTunes is when the real challenge started. Lots of problems with not being authorized to write some registry keys and iTunes would roll back the installation. Each time I installed iTunes I installed as Administrator. I had to jump through all of the hoops of deleting these registry keys what would not delete. I installed several times, each time deleting a new registry key that the installer would not overwrite. After 2 days I finally got iTunes reinstalled.
However iTunes would still not see the new iPod. Messed around with this for another few hours.
I have an old computer that I seldom use. This is an older Dell Dimension running Windows XP Professional Service Pack 3. It had an old version of iTunes. I thought I would try getting the iPod to work on this computer. This would at least tell me if there was a problem with the iPod itself. I updated the iTunes to the latest version. Connected the iPod. It was seen but said the iPod was corrupt. Did a restore and all appeared to work fine. So this tells me the problem is not with the iPod, but with iTunes on the other computer.
I went to my other computer, the one that I want to use iTunes on, and reconnected the iPod. It was seen this time but iTunes said that the iPod was corrupt and needs to be restored. I started the restore process. It has been restoring for over 10 hours now.
I really don't want to start over with all of the problems I had reinstalling iTunes.
Anyone have some suggestions on what to try next?Made some progress during my lunch break. I started suspecting a problem with the USB driver for this iPod. I found KB article 1538 which was helpful.
I went to the device manager and deleted anything that looked like an Apple device and deleted all USB mass storage devices. I also deleted the device drivers for these items at the same time. I then scanned for hardware changes and the iPod was found.
The iPod is now seen in Windows Explorer. It still has the name I gave it when it was connected to my other PC. So I suspect the restore that was taking over 10 hours never had a chance to start. From Windows Explorer I was able to access some folders on the iPod.
iTunes would still not see this iPod. However I hope a reboot will solve this.
Ran out of time and needed to go back to work. I will update how this worked. -
HP 250 G3 - problems with Windows 10 boot
I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.
SomeoneWithAnHP wrote:
Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re: Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO. Didn't help. for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup. I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk. Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this. My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem? Mine has Radeon graphics which was a bit unusual at the time. I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave. -
I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
With cat 4.6 and the drivers before everything works fine.
I tried fastwrites on/off(no good)
Disable Vpu recover(no good)
Raise agp voltage to 1.6V(no good)
I also tried asus own driver but the same thing happens.
However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
I hope someone have an answer to my mysterious problemQuote
Originally posted by Ycore
This is my exact problem. Computer has been running ROCK solid for the last few months with 4.7 catalysts. I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated. Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings). At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d.. I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
AMD 64 3200+
K8T-NEO
Antec 430W PSU
ATI RADEON 9600 PRO AGP
SB LIVE
1GB CORSAIR C2 DDR (2x512)
Lite-ON DVD/CD+RW
Windows XP SP2
I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
Also note that we have very similar setup's so try it and let us know if that works out for you.
Maybe you are looking for
-
hi guys, i want to insert data into sap r/3 table.... they have given some values related to import parameters, in that 2 tables are there modified_values,proposed_keys i want to insert the data into that tables...how? plz send me code..
-
Yosemite update left me with white screen. How do I recover?
Yosemite update from App Store has left me with a white screen and I can do nothing! How do I recover or complete installation?
-
I am currently trying to replace my screen in a g5 video ipod. The only problem im having is getting the ribbon cable in its slot. Does that have a clip that opens up or does it slide in with pressure. I dont want to force anything so I thought I wou
-
Hi All, My requirement is to fetch values from any given tables through ref cursor, so i have used a below procedure CREATE OR REPLACE PROCEDURE et1( tab_name IN VARCHAR2, c1 OUT sys_refcursor) AS v_prim_val VARCHAR2(2000); v_sql VAR
-
I would sure appreciate some help on this. We build a book on Sunday and when we looked at it today all of the photos are gone! What could have made that happen? How do I get them back. We still have the photos in Events, so I cant understand where t