Problem with new-line-character and java.io.LineNumberReader under AIX

Hi folks,
I got the following problem: I wrote a little parser that reads in a plain-text, tabulator-separated, line-formatted logfile (and later on safes the data to a 2-dimensional Vector). This logfile was originally generated by an AIX ksh script, however, I copied it on my Windows machine to work with it (for I'm using a Java editor that runs under Win Systems).
For any reason, Windows, and what is worse Java too, seems not to recognize correctly the new-line character (in the API it is written that this should be a newline '\n' or a carriage-return '\r' or one followed by the other) that marks the end of a line in the logfile.
Also, when I'm opening the logfile with the "Notepad"-editor, this special character does not seem to be recognized, every line is inserted right after the other.
On the other side, when I open the logfile with the built-in editor in the CMD-Shell ("Dos-shell"), the newline chars seem to be recognized correctly.
But when start my parser on the AIX-machine the newline does not seem to be recognized correctly again.
I tried to read in the logfile with MS-Excel and safe it as a plain-text, tabulator-separated, line-formatted logfile again, with such files my parser works fine both on the AIX as it does on Windows.
Any ideas? Anybody got over the same problem already?
Greetz FK

Under windows, text files' lines are usually delimited by \r\n,
under Unix/Linux/AIX etc. \n
and under Mac \r.
I recommend to use the following editors, which are capable to handle files with Unix and Windows-styled line-delimiters or convert between these types:
Programmer's File Editor (PFE; available on Windows)
The Nirvana Editor (http://www.nedit.org/; available on Unix, MAcOS, Windows)
(BTW good old vim can handle that too. Transferring text files to windows in order to edit them, even using Excel for this purpose means your being a UNIX newbie, (I mean no offense by writing this) so vim is probably beyond your reach for the moment.)
Java normally assumes the platform's line delimiters where it is running, so if you transferred the file from Unix to Windows might be distrurbing.

Similar Messages

  • Permission problems with command line CVS and Java CVS App

    Greetings,
    I'm part of a moderately sized website development team which recently upgraded to MacBook Pros (dual core) running OS 10.4.9. One of the primary tools we use in our day to day work is the open source concurrent versioning system (CVS). We've noticed a distressing issue running CVS on our macbook pros: there seems to be a problem with the way these new machines handle permissions on the directories/files that CVS uses to manage files.
    The error occurs when the CVS application, in this case both command line CVS and GUI CVS application named SmartCVS, tries to rename a temporary file named Entries~ to its new name Entries (no ~). It looks like this:
    java.io.IOException: Could not rename file
    /Users/[USER]/Sites/[MODULE]/lib/CVS/Entries~ to
    /Users/[USER]/Sites/[MODULE]/lib/CVS/Entries
    at smartcvs.JP.a(SourceFile:125)
    at smartcvs.JP.a(SourceFile:113)
    We've noticed that if we open up a get info window on the directory we're downloading, and choose "Apply to enclosed items" right when we start the download process, the issue will be resolved, presumably because the permissions are being set on the subdirectories as the download is taking place.
    We've checked the permissions on the overall ~/Sites/ directory numerous times, and they always seem to be set correctly as drwxr-xr-x. It's within this folder that CVS creates a directory with the CVS module name and downloads all the contained files, so we don't see why it would be having issues completing this successfully. We also checked to ensure the GUI CVS application is running under the current user on the machine: it does.
    Has anyone run into issues like this in the past? Is there more information I could provide to further clarify the problem we're having?
    Thanks for any input you have!

    Thanks for asking Jeff, yes one place we are seeing this error is Java application SmartCVS, though the results posted here are from a normal command line CVS checkout.
    ===
    Checkout command:
    cvs co [MODULE]
    ===
    Error:
    cvs [checkout aborted]: cannot rename file CVS/Entries.Backup to CVS/Entries: No such file or directory
    ===
    ID:
    uid=502([USER]) gid=502([USER]) groups=502([USER]), 81(appserveradm), 79(appserverusr), 80(admin)
    ===
    LS -ALN
    Computer:~/Sites [USER]$ ls -aln
    drwxr-xr-x 28 502 502 952 Jun 4 13:11 Sites
    Computer:~/Sites/[MODULE] [USER]$ ls -aln
    drwxr-xr-x 38 502 502 1292 Jun 4 13:33 www_root
    Computer:~/Sites/[MODULE]/www_root [USER]$ ls -aln
    drwxr-xr-x 32 502 502 1088 Jun 4 13:33 [SUBDIR1]
    Computer:~/Sites/[MODULE]/www_root/[SUBDIR1] [USER]$ ls -aln
    drwxr-xr-x 5 502 502 170 Jun 4 13:33 [SUBDIR2]
    Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2] [USER]$ ls -aln
    drwxr-xr-x 4 502 502 136 Jun 4 13:33 [SUBDIR3]
    Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3] [USER]$ ls -aln
    drwxr-xr-x 6 502 502 204 Jun 4 13:33 CVS
    Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3]/CVS [USER]$ ls -aln
    total 32
    drwxr-xr-x 6 502 502 204 Jun 4 13:33 .
    drwxr-xr-x 4 502 502 136 Jun 4 13:33 ..
    -rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries
    -rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries.Log
    -rw-r--r-- 1 502 502 48 Jun 4 13:33 Repository
    -rw-r--r-- 1 502 502 63 Jun 4 13:33 Root
    MacBook Pro / MacPro Mac OS X (10.4.9)

  • New line character and carriage return in XML, please help, thanks

    In XML, "
" is only the new line character. I have tried that. If you put that in your XML, for example:
    <tag>line1&#10;line2&#10;line3</tag>
    You will get the output as follow:
    line1
    ____line2
    ________line3
    (where ___ represents space)
    The output that I want is actually like:
    line1
    line2
    line3
    So I would like to ask how I can do this.
    Thanks,
    Jackie

    while parsing your XML file you can directly suppress these newline and similar things in characters() method of SAX parser.
    you can opt to do nothing when you encounter them else if it is normal character then use it to print it.

  • WRT160N - problem with on-line games and downloading

    Hi,
    Several months ago I bought a WRT160N router and I have a strange problem.
    When I play online games, such as QL, and someone else will start downloading from the Internet, from time to time about 10 sec I have 999 ping
    I turned on in the background ping to the router, and from time to time about 10 sec there are 2-3 ansewers with 1900-2000 ms.
    I tought that when I buy router with N-mode everything will work better, and there will be no problems with on-line gaming.
    Is there any way to fix this problem??

    I checked now and even no one is downloading there is the same problem.
    I checked on other router and it works fine.
    Next problem is when I browse youtube and play several films simultaneously, suddenly there are no responses from router, when I close them, and wait for a moment the responses are back.
    Whether anyone had similar problem??

  • OdiFileAppend tool issue with new line character?

    Hello ODI experts,
    I am using OdiFileAppend tool in a package to concatenate multiple files with same structure to a new file. ODI is installed in windows and also files exists in Windows only.
    OdiFileAppend "-FILE=C:\ODI_WORK\FILE_LOAD_DIR\PROCESS_DIR\*.*" "-TOFILE=C:\ODI_WORK\FILE_LOAD_DIR\PROCESS_DIR\CONCAT_FILE.txt" "-CASESENS=NO" "-OVERWRITE=YES" "-HEADER=1" "-KEEP_FIRST_HEADER=YES"
    First File:
    CST_ID,CST_CODE,CST_NAME,CST_STATUS,CST_ID_PAC,CST_ID_CHO
    -3,TWO,TXTFILE,A,864,
    second File:
    CST_ID,CST_CODE,CST_NAME,CST_STATUS,CST_ID_PAC,CST_ID_CHO
    -2,ONE,TXTFILE,A,864,
    output file by using OdiFileAppend tool is as below with two lines:
    CST_ID,CST_CODE,CST_NAME,CST_STATUS,CST_ID_PAC,CST_ID_CHO
    -2,ONE,TXTFILE,A,864,\-3,TWO,TXTFILE,A,864,\
    How can we modify the tool to append records in a new line?
    Thanks

    Hi Murali ,
    You are facing a Bug .
    The Oracle Data Integrator (ODI) defect is referenced as <<Bug 6518478>> <ODIFILEAPPEND DOES NOT WORK AS EXPECTED>.
    When Oracle Data Integrator (ODI) OdiFileAppend/SnpsFileAppend tool is used with -HEADER parameter set to 1 or higher, the resulting file is incorrect and a backslash ("\") character is automatically generated between the appended files.
    This Bug is fixed in ODI 11gR1
    If the generated file is to be used as Source Datastore in an Oracle Data Integrator (ODI) Integration Interface, to work around the behavior:
    1. Appending the files using the OdiFileAppend/SnpsFileAppend tool without the -HEADER parameter (or use "-HEADER=0").
    2. Then, in your Integration Interface, apply a Filter to the corresponding Datastore in order to remove the unused headers.
    Thanks,
    Sutirtha

  • Problem with new firefox tabs and window focus

    Here's a problem that I've had for ages - sometimes it annoys me, other times I can live with it. Right now it's really p***ing me off.  :x
    I have selected 'a new tab in the most recent window' under FF's Preferences->Tabs->Open links from other applications in:, so as an example, if I click on a URL in a mail in Thunderbird, Firefox opens it in a new tab. However, window focus stays on Thunderbird. I run both of them full screen, so although I'm looking at the web page in Firefox, anything I do on the keyboards affects Thunderbird. It affects URLs opened from other apps too e.g. if I open a terminal and do
    firefox www.archlinux.org
    focus stays on the terminal window. The only exception is when firefox is not already running - in that case, firefox launches with focus.
    DE is xfce4, and the system is completely up to date.
    I've done some googling, and AFAICS, nobody else seems to have this problem. Any ideas, anyone?
    TIA.

    Thanks MAC!EK - definitely a useful add-on, but it still doesn't solve my problem. In Tab Mix Plus Options, I have the following selected:
    Links -> Open links from other applications in: New tab
    Events-> Tab Focus -> Focus/Select tabs  that open from: <all>
    However, the behaviour is as before i.e. I click a URL in Thunderbird, it opens in a new tab in Firefox, but window focus stays on Thunderbird. Within Firefox, the newly-opened tab is selected or focussed, but Firefox itself is not.
    Anyway, thanks again. I think I need to keep looking.

  • Problems with new PalmDesktop6.2 and Palm TX

    I have a Palm TX that I have been using and syncing OK for over a year.  I recently installed the PalmDesktop version 6.2 and it seemed to work well.  For Christmas, I received an external disk drive and I moved all of the folders and documents from my My Documents folder on my C: drive to the new external K: drive.  I copied the Palm OS Desktop folder to the new K: drive and also kept a copy back in the My Documents folder on the C: drive.  Since I have done that, I cannot run the new desktop software.  I get the following message when the desktop software tries to start: "Runtime Error!  Program: C:\Program Files\Palm\Palm.exe  This application has requested the Runtime to terminate it in an unusual way.  Please contact the application's support team for more information. "
    I have read some other posts on doing a clean uninstall for XP but I no longer have the CD that came with the TX that has the original desktop software.  If that is available on the web, I am prepared to do that clean uninstall and re-install.
    Any help would be appreciated.  Thank you.
    jackmc92
    Post relates to: Palm TX

    I did the complete removal and reinstall, deleted the registry entries and rebooted; I then reloaded Pald Desktop, did a hotsync which appeared to go OK.  When I tried to open the Palm Deskto, I got the same runtime error message I first reported.
    The hotsync log says:
    HotSync session completed with errors on 01/04/09 09:09:36
     HotSync session started on 01/04/09 09:08:25, and completed in 71.0 seconds
     Date Book synchronization aborted
     Duration: 0.0 seconds
     Address Book synchronization aborted
     Duration: 0.0 seconds
     To Do List synchronized successfully
     Duration: 0.2 seconds
     Memo Pad synchronized successfully
     Duration: 0.5 seconds
     Documents To Go synchronization completed with messages
     Duration: 24.0 seconds
     Documents To Go Message(s)
     - Getting Started Tips -_1
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Getting Started Tips -
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Sample - Baby Picture
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Sample - Closing The Deal_1
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Sample - Golf Scorecard
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     WWW MEETING FORMAT 2
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Willingness Group_Alpha
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Willingness Group_Alpha_eml
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Willingness Group_Month
     - Source file cannot be found
     The item has not been updated on the handheld.
     Run Documents To Go on the desktop and update the item view to resolve this problem.
     Backed up some files successfully to Jack McIntyre's Backup folder
    Can you provide any clue as to why it didn't work?
    Many thanks,
    jackmc92
    Post relates to: Palm TX
    Post relates to: Palm TX

  • Airport Express problems with new MAC MINI and DLINK router SOLVED

    Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
    I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
    Problem was briefly
    Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
    also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
    Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
    last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
    I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
    between us we carried out the folowing and resolved the problem and I am now very happy
    mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
    This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
    Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
    We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
    we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
    this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
    you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
    Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
    Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

    Hello macfar14. Welcome to the Apple Discussions!
    For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
    Just to be sure nothing was missed, here are the basic steps to do this:
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network's Network Name or SSID>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

  • Regarding problem with new line feed for DME file generation

    Hello Experts,
    I m facing a problem in the DME file generation.
    we want each record in the DME file should be in new line. for that we have add the new line feed character in the each row end. So in the SAP output it looks ok, But if we download that file the carriage return field is coming in the end of every row.
    can any one tell how to solve this issue.
    Please refer the below line code which i m using for new line
    DATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>CR_LF
    You reply is valuable..
    Thanks,
    Suresh

    DATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>newline.

  • Problem with new line

    Hi,
    I'm trying to write a note for a contact.I have written following code
    contact.addString(Contact.NOTE, contact.ATTR_NONE, "bla bla bla");it works, but when i write
    contact.addString(Contact.NOTE, contact.ATTR_NONE, "bla \n bla \n bla");it doesn't work. What's wrong with newline
    Can anybody help me to fix it.??

    I'm still working on emulator.
    If I write
    contact.addString(Contact.NOTE, contact.ATTR_NONE, "bla \n bla \n bla");actually it's still working but the "\n" is ignored. The output is
    >>bla  bla  blanot
    >>bla
    bla
    bla but if I write (without space after new line)
    contact.addString(Contact.NOTE, contact.ATTR_NONE, "bla \nbla \nbla");it's not working and doesn't have any output. Is "\n" really not supported or it's a bug .??
    Thx

  • Problem with new lines

    I have defined a form in Dreamweaver  to be used in conjuction with my SQL database (I am using the PHP/SQL).  One of the fileds in my form is of type TEXT (as opposed to VAR CHAR). Now, eventhough the text I am entering for that TEXT field has a number of paragraphs, when I read back the TEXT  field from the database (via sql SELECT),  the data for the TEXT field comes out continuously without paragraps. I don't understand why the paragraph or newline markings are not working when TEXT type data is retrieved from the database.  Can someone help me please.  Thanks!

    This is because HTML ignores new lines. The solution is to use the PHP function nl2br(). Depending on which version of Dreamweaver you're using, you can apply this function through the Bindings panel like this:
    This is certainly available in CS4, and maybe in CS3 too; but not earlier versions.
    If you're using an earlier version of PHP, wrap the dynamic text in nl2br() like this:
    <?php echo nl2br($row_recordsetName['fieldName']); ?>

  • Major problems with adobe flash player and java.....HELP!

    So i have bought 3 laptop computers during this past week due to the same issue im having now. When i try to play my gaming websites such as pogo...simslots and my fav games on facebook.....i get a oppps we are sorry but it looks like you do not have adobe flash player/java up to date....to update click here and when i do it, it does nothing...it says that since windows 8 is integrated with java and flash player i do not need to down load these.....but yet with out those i can not play my games....have called to the geek squad and they seem to not know what the problem is either, they only said that it sounds like a problem with windows 8 itself......can someone please help me?????

    See http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html - most likely you didn't enable the add-on.

  • Camera Raw problem with new Nidon D90 and CS2

    Please forgive me if this is a repeated question . . . but I need some advice . . . I just picked up a new Nikon D90 tonite . . . I'm using Mac 10.4.11 and Photoshop CS2 . . . when I tried to open my raw files in Bridge, I get the message that these files cannot be recogniized . . .After searching Adobe support I just have more of a headache . . .I primarily shoot Raw . . . and have never had a problem with CS2 and Bridge with my Nikon D80 . . . Please give me some advice . . .Thanks so much in advance . . .David

    Of course you get an error! The D90 didn't come out until way after Adobe stopped upgrading ACR for Photoshop CS2. You will never have support for your NEF files with Photoshop CS2. If you don't want to use the DNG converter you have several choices. Upgrade to Photoshop CS4 or Lightroom 2.x, purchase Photoshop Elements (latest version, although Camera Raw doesn't have all its features in Photoshop Elements), purchase some other software that will support your NEF files. The only way you can have the support for your NEF files in Photoshop CS2 is to use the DNG converter.
    A lot of people complain that it is an "extra step" to use the DNG converter. You have to download the images from your camera anyway. Just use the DNG converter to do that. It will take a little longer than a normal download, but once the download/conversion is completed your workflow is no different than it otherwise would be.
    Camera Raw has matured greatly since Photoshop CS2. You purchased an outstanding camera. It's now time to upgrade your software. ACR is little more than a toy in Photoshop CS2.

  • Thread Problems with Solaris 2.7 and Java 1.3

    Hi,
    we are deploying a Java distributed application, based on JAVA 1.3, on a SOLARIS 2.7 system and we are meeting some problems with threads.
    This application uses a distribuite computing based on ORBIX 2000 environment and creates more than 40 threads.
    Sometimes happens that one or more threads ( consider that all the threads have the same priority) are no more scheduled even tought they have some work to do into the local queue.
    We have tested the application on a NT system and the problem does not appears.
    Do you have some suggestion ?
    PS: Note that all the other threads work well and it seems that the problem is not related to a Orbix method.
    Thanks
    Roberto

    It crashed 3 seconds after it is running. Should be reading some jar file.
    Could be a something corrupted a zip file or something. Can you still do a java -version? You may want to try reinstalling 1.4.2_07

  • Problems with new alum keyboard and orig acrylic keyboard on eMac

    Hi ,
    I need help , pls.
    I just got an alum keyboard to use w/ my eMac.
    I've upgraded software as instructed.
    My numbers pad do not work.
    ALso using a logitech wireless/laser opt. mouse. I had to download logitech's software ( never had to do this before ).
    Being that I'm so used to the numb pad and wireless, I can't do any type of work w/o accidentally using the numbers pad.
    In doing so, it freezes up. At one point I had all hardwired to the eMac ( new & old keyboard and mice ). The wireless mouse would have to be reinstalled after the machine would go to sleep and when I'd log out as a user.
    I've tried to use systm. pref. and used "set keyboard to default". Using the flag (US and NOT extended ).
    It's been a pain for the last few days. I went back and am now using my orig. acrylic /plastic keyboard that came w/ my eMac. Now this keyboard's num pad is not functioning anymore either.
    Now..what I've done so far....
    I've deleted the "dmg " file from the updated alum keyboard, and trashed all logitech's software.
    I even ran applejack ( yes, I'm desperate so I did it.) I have a big workload ahead of me.
    My old keyboard and logitech mouse is working except for the numbers pad.
    What must I do ? Or what else can I do ?
    I've called support and all the say is take the new keyboard to the store.
    No one at apple support or has helped. "May be a batch of unsuitable keyboards".
    I understand the part where you must use some things for the keyboard w/ an alum. iMac.
    But those things i.e iPod, hub are not being used via alum keyboard's 2 ports , so I know that's not an issue.
    My mouse ( not a mighty mouse ) and the logitech and old keyboard are hard wired to the eMac (machine's usb ports ) itself.
    I need some help pls. Can someone pls. respond here or let me know of any similar problems and solutions you've made.
    Thanks in advance.

    Whenever new software is installed it is wise to run Disk Utility and to Repair Permissions. If you haven't done this try it and see whether there's any difference.
    If you haven't tried yet plug the keyboard into a different usb port. If it works there it's possible that the other usb port is faulty.
    My guess is that there's a software problem. So...
    Try downloading the 10.4.11 combo update and installing this. You can do this 'over the top' of what's already there. Many users have found this resolves system software issues. You may need to re-apply other software updates released after this one. You can check Software Update to see which updates are necessary if any.
    Neville

Maybe you are looking for

  • Colour Distortion in some games using Fx 5200

    Hi! When using my graphics card in certain games (e.g. Tony Hawk's 4, Dungeon Siege), the colours almost look inverse (though they're not quite, just some crazy psychadelic effects where there shouldn't be.) However, this isn't the case on a few othe

  • SAPSCRIPT appears with blank fields

    Hello Guys, I am finding a problem with a SAPscript. Running directly my program Z(SE38) , it select the P.O.tables(EKKO, EKPO,...) correctly, calls my ZSAPSCRIPT correctly and I can preview, It's OK. It Has made the parameterization and calling via

  • ERROR 164 MEMORY SIZE ERROR

    Help, please, someone! I've just replaced the original pair of 1Gb DDR3 DIMMs in my new S10 (6423-27G) with a pair of Lenovo-branded 2Gb DDR3 DIMMs, to bring the total system memory to 4Gb (I am hoping to expand to 8Gb later on when DDR3 prices drop

  • I have a dead pixel in my screen of my iPad 2 what should I do? The device is 5 days old.

    Please help me I bought the iPad 2, 5 days ago and when it has a dead pixel and it is more intense when it warms up a bit what should I do?????

  • Purging the Grid Control Repository database

    Our Grid Control Repository database has grown large over time and we need to free up some space. When we remove targets, is all the data related to the target cleaned out?