Problem With New Msi Fx 5900xt SOLVED

I JUST OPEN THE BOX AND INSTALL MY BRAND NEW FX 5900XT (YES I MANAGE TO SELL THE FX5700 TO A FRIEND ) AND MAKE IT RUN NICE :biggthumbsup:BUT HAVE TWO ISSUES
1. CAN'T OVERCLOK
2. I DID NOT FIND WHERE THE MONITOR TU TEMP AND FAN RPM ARE
I INSTALL 3D TURBO AND THERES NOTHING ABOUT RPM AND TEMP.
AND AFTER TWO HOURS OF USE THE SCREEN FILL WITH DOTS AND THE MACHINE REBOOT

To XSOFT,
I believe you have exactly the same problem as me !
Due to this excellent thread I worked out that my PSU was seriously Underpowered as is yours ! Did you realise that your Power Supply Unit is only kicking out 330.5 watts ? meaning to operate at its 'safe' max which is 70% you are only provided with 231.35 WATTS ! Anything over 70% overheats everything attached to your psu apparently !
This FX5900XT uses 70 odd all on its own ! Here are the Links I found amazingly helpfull.
http://www.jscustompcs.com/power_supply/
https://forum-en.msi.com/index.php?threadid=31880
Living in the Uk though I dont have access to buying an Enermax PSU which is highly recommended. Work out using these links what your system requires as a minimum and then add 30%. That is the figure that you need your PSU to kick out at 70% efficiency. I have upgraded to the best 550pwatt psu I can find in my area and it barely covers my min req of 372 watts !

Similar Messages

Problem with new MSI GeForce FX 5900

Just bought a new MSI GeForce FX 590 TD-128.
I removed previous drivers and video card, installed the new video card and attached the power cable, and booted my machine.
When I boot the machine I get no picture....just a blinking cursor in the top left hand side of the screen. I thought maybe it was a power supply issue (350W PSW), so I tried installing the video card in another machine with a 400W PSW. I get the same darn blinking cursor X(
Anyone have any ideas what causes this? Do I have a defective card?

Quote
Are both those boards AGP 3.0 ??
I have a Soyo Dragon K7V Dragon+ and a ECS K7S5A. The website for the Soyo board is:
http://www.soyo.com.tw/products/proddesc.php?id=37
It mentions a Universal AGP Pro Slot and support for AGP 1X/2X/4X...but no mention of AGP 3.0.
The ECS board is at:
http://www.ecs.com.tw/products/pd_spec.asp?product_id=192
and only mentions AGP 4X support.
Does the FX 5900 only work on the newer motherboards maybe?
Quote
If it doesn't work on any board then it might be bad, but 350w and 400w don't mean much so it's also possible you have a power problem.
Both power supplies are made by Antec. Seems unlikely that neither machine would even boot...but I've seen stranger things
Ideas?

Problem with new MSI GTX660Ti N660TI-PE-2GD5/OC

Hi , I've just bought a new MSI GTX660Ti GPU from amazon , i was previously running the on board HD4000 graphics from the Intel I7 3770K CPU.
When i plug the new GPU in and reboot - i get the 'GIGABYTE' splash screen on my monitor , and it just hangs there -I am unable to enter any of the options and pressing DEL , F8 , F12 etc gives no response.
I've installed all the drivers , and i simply switch off the PC , installed the graphics card , take the DVI cable out of the mobo socket and plug it into the GPU socket then switch on.
The bios beeps once , the display remains frozen on the splash screen for about 3 minutes , then another single beep from the bios and the display remains frozen on the splash screen for another4 or 5 minutes , then eventually the screen goes black , with just a single flashing underscore. No keyboard inputs make any difference.
re-booting just gives the same result.
BIOS settings are all at default Including > Init Display First - Auto , Internal Graphics - Auto
So , is there something that i'm doing wrong or is the new graphics card DOA ?
Please help
Many thanks
Lee
MoBo: GA-Z77X-UD5Hv1.0 Bios version - F8
CPU: CORE I7 3770K
Power Supply:Coolermaster Pro 600W modular PSU
Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
Samsung 256GB SSD + 2 x Seagate 2TB HDD's
Video Card: MSI GTX660Ti N660TI-PE-2GD5/OC

Success !!
That seems to have done the trick , New GPU installed & everything appears to be working as it should now. I feel such a squid for not checking for BIOS updates !
oh well , all's well that ends well . Thanks very much for you help (and your patience !)
I really appreciate it.
Lee
MoBo: Gigabyte GA-Z77X-UD5H Wifi. Bios version - F14
CPU: Intel Core i7 3770K 3.4GHz Socket 1155 8MB Cache
PSU:Coolermaster Pro 600W modular PSU
GPU MSI GTX660Ti N660TI-PE-2GD5/OC Driver 314.07
Ram: G-Skill 16GB (4x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V
Samsung 830 256GB SSD + 2 x Seagate 2TB HDD's

Major weird problems with new msi p6n diamond

okay let me start with my specs
q6700
gskill pc8000 memory. 2gigs. tryin for 8gigs
right now single 150gig hdd. 4x150 gig raptor
dual 8800gts in sli
enermax galaxy 1kw psu
bigwater 760i water cooling
okay. well i built the computer about 2 weeks ago and since then its been nothing but problems. first i built it liek normal and didn't know about the patch for more memory. So after knowing that i used the patch and was able to boot vista 64bit. then the fun started. I havent been able to do anything related to 3d work since i built it. i used the latest drivers. I used the ones from the first reviews of the 8800gt. I used only one card. etc. Nothing works. wow freezes up. Age of empire 3 ad 2 freezes or plays at like 4 fps. 3dmark cant run at all. I finally got it stable to run and it only gives me 3000 for a score in 03. I decided to boot up with my old 1900xtx and sure enough after putting the new ati drivers. 22000 on 3dmark 03 and even crysis atleast runs well enough to play. I have a single slot intel board which i got with my bundle and havent tried but i was about too. I have the memory set at the manual settings it asked for. also did auto and most basic things possible. nothign seems to work. has there been any issues with the gt's. what other help can y'all give me.

It looks like power cable(s) is not plugged to VGA(doesn't get enough power and slowdown{decrease freq. automatically})
(Provide screenshot from Everest(http://www.lavalys.com:8081/beta/everestultimate_build_1217_x0cm3svydaq.zip)GPU page.
Have you tried with each one of them (you said that have 2x8800GT) individually?If yes does it happend there too?
Test VGA in another machine.
Quote from: BOSSKILLER on 15-December-07, 14:04:20
BIOS version onboard?
Use Driver Sweeper(http://downloads.guru3d.com/download.php?det=1655) to remove currently drivers.(Make sure that you have installed chipset drivers 1st)
Then Install 169.21: https://forum-en.msi.com/index.php?topic=112805.msg844890#msg844890

Ata problems with new dvd drive. [SOLVED]

I just bought a new dvd-burner. At the first boot I noticed a lot of messages along the lines of:
ata2 exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
and an extremely long boot time. 3 to 5 minutes. When finally booting in to system the drive seems very sluggish to mount. Should I disable sata and pata in mkinitcpio? Is my new hardware crap?
Its a Samsung Writemaster DVD-burner btw.
Last edited by Ashren (2008-01-29 22:27:44)

Do you have an idea where the problem could lie?
Here's my lspci -v:
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02)
Subsystem: Dell Unknown device 0157
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fd000000-feafffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:06.0 System peripheral: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface (rev 02)
Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff80 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at ff60 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff40 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff20 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 21
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fcf00000-fcffffff
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Unknown device 0157
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Dell Unknown device 0157
Flags: medium devsel, IRQ 18
I/O ports at eda0 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ee00 [size=256]
I/O ports at edc0 [size=64]
Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Unknown device 01b9
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at df40 [size=64]
Capabilities: <access denied>
Perhaps some sort of interrupt (IRQ) issue?
Last edited by Ashren (2008-01-29 20:42:25)

When Apple solve problems with new iTunes calendar sync with windows and outlook?

When Apple solve problems with new iTunes calendar sync with windows and outlook?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Problems with a MSI K8N

So yeah I just bought alot of computer parts including this motherboard. I have my computer area downstairs in my house but I have a spare monitor in my room. After I finished installing everything I pluged the case into the wall and hooked it up. I proceeded to turn the power on and noticed the "NEO PLATNIUM" on the screen I figured everything was working so I turned the power off not thinking it would mess the bios up and took it downstairs and pluged it in again with my real monitor and computer set up. I tried to power it on again and it shut off in like 5-10 seconds I proceeded doing this about 4 times everytime it shut off so I took it back up stairs to see if something became unplugged. From then on I couldnt even get it to turn back on. My case showed a green light but when I pushed power It didnt work. I tried clearing the cmos with no success. I'm hoping somehow you guys will know what to do.
Thanks for you time.

Hey man, I feel your pain, and I feel obligated to post this because of the way everybody else is treating the problem.
Let me point this out to everybody:
This guy knows what he's doing, he isn't doing anything stupid. This IS a problem with this MSI board. How do I know? Because my computer setup is doing the exact same thing. I've been through 2 boards and 3 CPU's now. My setup worked fine for 2 weeks, then one day it just stopped working. It turns on for 5 seconds, then just turns itself off. It does not post. D-Bracket claims it is a bad or badly seated CPU. It lies. I just put in a brand new working CPU today, and i'm getting the same issue. It IS the motherboard. Now I just have to get it fixed from MSI somehow. I feel comforted knowing i'm not the only one with this problem. I just replied to some other guys post about having this issue.
I just posted my issue on another motherboard, but I will post it here as well for you all to read so that you know this issue is more widespread than it may seem.
Boy, what a ride this has been so far.
Let me briefly explain the issue. Got a the motherboard and a XP64 3200+ from newegg.com, etc. Plug it all together - nothing. I've built plenty of systems, and i've built several using thet MSI K8N board, also. I discover that the RAM is bad and the motherboard is also bad. Repeat as necessary several times.
Long story short, I'm on CPU #3 and Mobo #2, soon to be #3.
The 1st CPU was returned because a friend was working on the system and pulled the heatsink off and the CPU stuck to the bottom of the heatsink and some of the pins got bent/broke. (This is due to the poor design of the heatsink holder on the MSI board. There is WAY too much surface area between the heatsink and the CPU for the heatsink to be enclosed how it is on this board.. trying to pull them apart like that is just impossible. It can't be done. It has to be at an angle. . Only way).
Now, after we got the motherboard RMA'd and bought a new CPU, everything worked fine and dandy.
Two weeks later, one day the system just won't boot. There is no video signal at all. The problem is that when the system turns on, it runs for about 7 seconds.. all the fans turn on, etc. and then it just turns itself off.
I've tried different power supplies, i've tried only with the CPU, Mobo, and RAM, and hell, i've even tried it without the RAM. I've tried it out of the case, to check for shorts. Nothing. I've checked the power switch to be sure it isn't being stuck on, it's not. There is no reason, whatsoever for the computer to do this. The Diagnosis LED Lights show all 4 red which means badly seated or damaged CPU. Ok. So I RMA the CPU. I just get it back today, and we're on the 3rd CPU now. Plugged it all together.. brand new CPU. The old one obviously didn't work or else they wouldn't have RMA'd this one to us. They should have tested this one first too, I think.
SAME PROBLEM.
The computer turns on, lights fans etc. come on, and 7 seconds later the computer shuts down. There are no BIOS beep codes, no video signals, NOTHING.
This really only leaves me with one conclusion - the motherboard is bad. There are only 2 choices, CPU or Motherboard, and the CPU is brand new.. and the problem was the same with the last one ... common denomonator is the motherboard. Now its been so long waiting for the RMA on the CPU and everything ... plus the 2 weeks that this motherboard worked, that newegg probably won't take back the motherboard. My only real options is to send it to MSI for repair or something.
This is a very sad day. The only thing I can think would have happened is that the motherboard had some kind of voltage issue to the CPU.. maybe some kind of electric jolt that damaged the CPU socket and the CPU itself so that now nothing works. I'm most afraid that the motherboard is damaging the CPU's.. and that this new one we just put in could be damaged from the motherboard also.
These things are expensive... I can't afford for all this to keep going. I've easily spent $150 - $200 doing RMA's for all this ****. It's just ****ing rediculous. I should win an award for most computer problems.
Before I start freaking out about this even more, let me get to the point of this post.
Has anybody else experienced something like this? Specifically with this board? With something else? What the hell can I do about this, or is my only option the motherboard.. as far as I can tell.. it can't be anything else.
-Kevin

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

I suggest you contact Adobe tech support or their Mac forums for assistance.

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

What is your technical support question for these user to user technical support forums?

Before I buy has there been any problems with new 27 iMacs?

Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

Hello richard from Folsom:
Are you inside or outside? ( I could not resist, I lived in Sactown).
Anyway, advice is frequently worth what you pay for it, and mine is free.
If you want it, buy it. The posts above are right on the mark (except waiting is probably overly-cautious). The best advice (from anamusic) is to buy the extended warranty - well worth the money.
Barry

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

Contact the email provider for assistance with their service.

Problem With New Msi Fx 5900xt SOLVED

Similar Messages

Maybe you are looking for