Problem with New Posting Period

Hi Experts,
I am trying to create a new posting period for 2009 but the system will not update. I have done this for several companies on the same server and it worked but for some it wont work. I do not get an error message, the system does not respond at all.
I am using SB0 3005 A.
Regards,
Lebo

Hi,
Check Note No. [1079168|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1079168]
Regards,
Jitin
SAP Business One Forum Team

Similar Messages

  • Problems with the posting period....

    Hi guys,
    every once in a while the old problem with the posting periods occurs. This morning it hit me and I went out to repair it.
    Starting out from MMRV I checked the open period and it said 062009.
    Using MMPV, by mistake, I opened 112009, so that I'm able to post to 112009 PLUS the previous period 102009 (which is ok so far). Later on I checked OB52 to see, if finance is not the problem. The opened period lasts from 012009 to 122009.
    Long story short: everything seems perfectly alright, however it still doesn't work. It says: Posting only possible in periods 2009/11 and 2009/10 in company code 1000
    I don't see where there could be a problem now...
    Any help is greatly appreciated!
    Thx & regards,
    Bobby

    Hi,
    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/10/2009 for Oct. 2009 month to be opened as of now
    That means, user can post for the month of sept 2009 as well as Oct. 2009
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    Other way of doing it is follow these steps: ( *TRY in Sandbox But do not try in PRODUCTION SYSTEM*)
    1. Use t.code: OX18, and delete the plants assigned to your CO.Cd and save.
    2. Use t.code: OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.
    Regards,
    Biju K

  • Reg: Query Problem for New Posting Period

    Hi Xperts,
    While I try to Map the A/P Invoices with their respective Outgoing Payment,
    I used the following Query and it's Query Printlayout
    SELECT T0.DocNum [Payment#], T0.DocDate [Payment Date],
    T0.CardCode, T0.CardName, T1.InvoiceId, T2.DocNum [AP Inv#],
    T2.NumatCard [Bill No.], T2.DocDate [Bill Date], T1.selfInv,
    T1.SumApplied, T1.WtAppld, T0.NoDocsum 
    FROM  [dbo].[OVPM] T0  INNER  JOIN
    [dbo].[VPM2] T1  ON  T1.[DocNum] = T0.DocNum
    INNER  JOIN [dbo].[OPCH] T2  ON  T2.[DocEntry] = T1.DocEntry
    WHERE T0.Cardname='[%0]' and T0.DocDate='[%1]' and
    T0.DocNum='[%2]'
    I got the above query from our Expert Mr.Sambath only.
    Now what is the problem is the query is retrieving the payment details of old Posting Period only and not the current posting period.
    In detail, I used 'Primary' Series for FY08-09, Period indicator 'Default'
    Now I'm using 'Primary1' Series for FY09-10, Period indicator '0910'
    Thanx in adv.
    Regards,
    Bala

    Hi Bala,
    Looking at your query, it is not query issue ,it is your data issue.
    Please check if you have data in  VPM2  table  which is bank transfer payment method
    Thank you
    Bishal
    Edited by: Bishal Adhikari on Apr 9, 2009 8:48 AM

  • New posting period for former fiscal year

    Hello All!
    For a customer we set up a database with posting periods for 2011 and 2012 (monthly periods). The database went live in 2011.
    Now the requirement came up to post the opening balances for 2011 per end of 2010 (to have the postings not in fiscal year 2011).
    My question is: is it a problem to add now a fiscal year 2010 (yearly basis)?
    Thanks and regards
    Peter Ganserer

    Hi Peter,
    Although it is your 2nd posting, I would add welcome message because I had not do so 1st time.
    For your question, it is not possible to add new posting period for former fiscal year. You best solution is to post those OB as the first date of the first period.
    Thanks,
    Gordon

  • Document Series Error after creation of a new Posting Period

    Hi
    While Creation of a new Document Series for user created UDO (after creation of new Posting Period
    with Period Indicator) on update its showing a message box
    "Application Error occurred, Dump file created in path  C\Program Files\SAP\..\Log......"
    And soon SAP B1 gets exit.
    Can any one help me to come out of this problem.

    Hi,
    Whenever Dump file created, it is high time to log a message to SAP support.  This problem is beyond forum function.
    Thanks,
    Gordon

  • I have Created new posting period but it assigns -1 in OFPR table

    I have created new posting period eg 2010 .with user manager but still there is value of -1 in usersign field of ofpr table
    i am getting confuse will you help me to rectify?
    Thanks for previous answer

    I have check our database and found out that all periods with usersign as -1 if they are not the periods belong to the first year.  It might be designed that way.
    Thanks,
    Gordon

  • Voucher Number in new posting period

    hello,
    I have created new posting period and series for financial year 2011-12.
    In previous year I have created 600 voucher. My issue is that when I am creating new
    voucher, voucher number is showing 601. I want that for new series voucher number should be
    start from 1. but it seems like numbering series doesn't affect the voucher number.
    Because there are no series creation for journal voucher. In this case how can I solve my problem.
    Please help me on this.
    thanks
    Annu

    Hi Annu.............
    You created Posting Period but have you created Period Indicator and Assigned this Indicator to this created Posting period?
    If you have done this then when you define new no. series from one just assign the same indicatorto this New No. Series also and lock old series.....
    Hope this will work....
    Regards,
    Rahul

  • Cannot add new posting period

    Hi All,
    I get the following message when adding a new posting period : "This entry already exists in the following tables “Posting Period”(OFPR) (ODBC – 2035) [Message 131-183]".
    We have checked for duplications and inconsistencies in both OFPR and AFPR, but don't see any.
    We have also updated the AFPR table in a test company with OFPR, but this also did not work...
    Any suggestions?
    Jacques

    Hi Peter,
    We also had this issue once, it was in version 2004 and it happened when the client created a posting period but then deleted it. The period code was not seen on table OFPR but it was in ADM1 so the error message was caused by this.
    In our case we ran a report on ADM1 to see what period codes were used (the deleted codes were all there...) and we could create a new period using a code which was not used before so which was not in ADM1.
    Hope this helps.
    Regards,
    Nat

  • Cannot create new posting period

    Hi,
    A customer is unable to create a new posting period for year 2012. The following error message appears: "No matching records found. Period Category (OACP) ODBC-2028. Message 131-133".
    SAP version: 8.81
    I  searched in notes & forums but I couldn't find a solution to this problem.
    Thank you in advance for your help.
    Nadia.

    Hi Nadia
    how did the customer try to make new period?
    through Administration->System InitialisationGeneral Settings->Posting Periods->New Period?
    if yes, could you please have a look on the OACP table by trying the
    select * from oacp
    and find out if there is any record?

  • Problem with depreciation posting for an asset with a '0' net book value.

    Hi,
    I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
    On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
    In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
    Do you know how this could have happened and what can I do to get the value of this asset back to 0?
    Thank you,
    Karol

    Hi Murlidhar,
    Thank you for your reply.
    I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
    Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
    I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
    Thank you,
    Karol

  • Due Date in new posting period

    Hi All,
    Posting date range in new financial period (new posting period) is one in which my JEs should posted and they will be having impact in financial system. Which is logical.
    What is the need of Due Date? Is it useful in any practical situation?
    B Ravi Shankar

    Ravi,
    You do not have to specifically define a range? When you create a posting period SAP automatically create the range from first day of Fiscal year to last day of Fiscal year.
    Let me explain with an example. 
    Let us consider  01/01/2007  to  31/12/2007 as the fiscal year
    For some of the document that you create during the last few months, you may require to enter a Due date later than the Fiscal year (going into next fiscal year)
    example: Invoice created on 15/12/2007 with Net 30 terms will need a Due date of 14/01/2008 but since you Due date range ends on 12/31/2007 you will not be able to Add this document.
    To overcome this you will have to click on the yellow arrow next to the Period and change the <b>Due Date to</b> to accomodate the 14/01/2008 due date.
    Hope it helped
    Suda

  • Before I buy has there been any problems with new 27 iMacs?

    Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

    Hello richard from Folsom:
    Are you inside or outside?  (  I could not resist, I lived in Sactown).
    Anyway, advice is frequently worth what you pay for it, and mine is free.
    If you want it, buy it.  The posts above are right on the mark (except waiting is probably overly-cautious).  The best advice (from anamusic) is to buy the extended warranty - well worth the money.
    Barry 

  • Errorwhen creating new posting periods

    Hello,
    One of our client is creating new posting perio 2012 but encountering error. Try to find solutions from the forum but nothing seems to fix the error.
    Transactions created before the % were found in the system [message 636-7]
    They are using  SAP 8.81 PL 4
    Regards,
    Jaylord
    Regards,
    Jaylord

    Hi,
    Can you check and confirm whether any transaction is added in the system with the posting period which you are trying to define :
    select * from OJDT where refdate >= '2012.01.01' and refdate <= '2012.12.31'
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Facebook problems with new macbook pro.

    Facebook problems with new macbook pro. I can't publish photo albums to timeline. I can't share items onto timeline. Photos I'm tagged in don't appear on my timeline. Any help?

    Yes! Been living in a hellish nightmare since Sept-Oct. Unlike you, however, Apple has been of no help. They say the iPad is unhackable, plist and crash reports are none of my business and who understands them anyway, their route tracing apps are probably not reliable. The best they could do was wipe the iPad clean. Lost photos they said would be in the cloud....
    Almost immediately was back in somebody's VPN, their remote controller, video, audio, working. Got the purple buddy for the first time today. I have been invaded, my iPad no longer feels like my own, I have lost thanksgiving, Christmas, new year trying to track down the invaders, signed up for a Cisco course, set/reset passwords.
    I don't know who else to contact... Or what next to do.
    I've read similar frustration in other posts, scattered around the support communities. Yours is the only one that has worked toward a solution.
    How did you get anyone at apple to look at your logs and acknowledge there is a problem?
    Would be happy for a suggestion on how to proceed. Already been the apple store genius and tech on phone route.

  • Problems with new catalyst

    I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
    This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
    With cat 4.6 and the drivers before everything works fine.
    I tried fastwrites on/off(no good)
    Disable Vpu recover(no good)
    Raise agp voltage to 1.6V(no good)
    I also tried asus own driver but the same thing happens.
    However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
    I hope someone have an answer to my mysterious problem

    Quote
    Originally posted by Ycore
    This is my exact problem.  Computer has been running ROCK solid for the last few months with 4.7 catalysts.  I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated.  Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings).  At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
    At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d..  I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
    QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
    AMD 64 3200+
    K8T-NEO
    Antec 430W PSU
    ATI RADEON 9600 PRO AGP
    SB LIVE
    1GB CORSAIR C2 DDR (2x512)
    Lite-ON DVD/CD+RW
    Windows XP SP2
    I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
    Also note that we have very similar setup's so try it and let us know if that works out for you.

Maybe you are looking for