Problem with new pricing procedure - free of cost

i set up a new pricing procedure where i have zsed (special excise duty) and zmws (sales tax) set as manual, it's not valid on some free sample orders. but when i goto create order it does not show up under conditions, even though i've maintained it for that material in vk11. and when i click on condition type in conditions, it doesn't show up in the drop down either (at the order level). if i just type zsed it says zsed cannot be processed manually.
but if i change the pricing procedure and take off the manual check mark, the tax shows up on the same order automatically (from vk11) but i can't delete it there.
suggestions? i need for it to show up or have an option where if it shows up i can delete it. thanks!

fyi,
If you set the "Manual" indicator in pricing procedure against to any condition type, then you can enter this condition type value in particular transaction. ( But for this condition type details, " changes can be made- setting maintain as "D" not possible to process manuall). Same "manual" logic in the pricing procedure will not work.
Because controls in Condition type has priority than anyother.
Now coming to your question,
If I understood it properly,
ZSED is not applicable to every free of cost order, but it may be applicable to other orders ( excl: FOC orders). Expecting ZSED Condition type maintained in both pricing procedures ( FOC sales pricing procedure & non FOC sales procedure).
if you set the " Manual entries has priority"/ tick mark delete check box in ZSED, then it will allow to enter manually/delete the condition type in FOC order as well as non FOC orders too.
Then there could be chance that user may delete/manually enter ZSED in non FOC sales.
better way would be, create new conditiont table by including Sales document type ( assume you created new document type for FOC sales) with other required fields ( eg: customer/material etc..,).
assign this condition table in top of all the accesses in ZSED's access sequence.
Maintain Condition record.
By doing so, Condition record is applicable only to FOC doc type sales- if maintained , else it will search next condition record.
which will not effect the non FOC sales & user cant delete ZSED from non FOC sales.
Hope it helps

Similar Messages

Creation of a new pricing procedure by copying existing one (for sale order

Hi,
Existing pricing procures are here below:
1000     10     00     1     1     ZBRI01     Pricing Proc_Under Con                            1000     10     00     1     2     ZBRI02     Pricing upgradationFlat
Now I need to create a new pricing procedure for the following combination :
1000     10                 00                 1                     3                   ZBR103        Pricing_single sale
Please let me know the steps to follow.
With regards,
Parijatha

Dear JP,
Based on your last direction, I created a pricing procedure. It is hitting the right GL and everything looks ok. My problem is " ZCAR (car park value which is a ZFREE item should get added to the "Net value" which is not happening.    Control data -reference step overview is herebelow.   From step 50 to 300 all are ticked for Statistics.
50     0     ZBAV     Base Value for Calc     0     0               0     0     0
110     0     ZTCO     Apartment Value     0     0               0     0     0
115     0     ZDSQ     Discount on ApT     0     0               0     0     0
120     0     ZDVA     Discount on ApT_Lump     0     0               0     0     0
150     0     ZTGR     Terrace/garden Stat     0     0               0     0     0
160     0     ZDTG     Discount on Terrace     0     0               0     0     0
210     0     ZCAR     Car Park (booking)     0     0               0     0     0
250     0          Total Consideration     110     210               0     0     0
270     0     ZGOV     Govt Rate_Reg     0     0               0     0     164
300     0          Upgradation Value - Billing     250     270               0     0     0
310     0     ZBLD     Building - For Bill     270     0               0     0     164     ZBB
320     0     ZSDT     Reg and Stamp Duty     0     0               0     0     0     ZSD
330     0     ZSDA     Stamp duty-Agr-Sell     0     0               0     0     0     ZSA
340     0     ZECH     Power Consump. Chgs     0     0               0     0     0     ZEC
350     0     ZLFE     Legal Fees     0     0               0     0     0     ZLF
360     0     ZPTX     Property Tax     0     0               0     0     0     ZPT
Can you please help me what should I do to add ZCAR (item category is ZFREE) value to Net value.
With regards,
Parijatha

How to replicate a new pricing procedure from SAP ERP?

Dear Experts,
I have set up a new pricing procedure in the ERP backend and I would like to replicate this to SAP CRM.
A replication using object DNL_CUST_CNDALL has been executed once in the past.
What would be the best way for me to download the new pricing procedure without overwritting any of the existing pricing settings in SAP CRM?
Thanks,
Dan

Hello Dan,
The views in CRM pricing customizing do not allow to change the pricing procedures, condition types and access sequences that have been downloaded from the ERP system. You will see a field in customizing Source System with value A indicating that these were not created originally in CRM and the view does not go to edit mode.
In case a i.e. condition type had been created originally in CRM with the same name as a condition type that exists in the ERP the download of the adapter object will not delete the condition type that was created in CRM.
Therefore it is safe to execute the initial download of the adapter object DNL_CUST_CNDALL without filtering. If you have many pricing procedures in the ERP and you do not want to transfer its customizing to CRM you can create your own adapter object by copying the content of DNL_CUST_CNDALL ( to be on the safe side and keep the original) and then add a filter in your adapter object ,for example in pricing procedures using field KALSM of table T683S, including all the pricing procedures that must be transferred to CRM u2013 those that were transferred in the past and the one that you want to transfer now .However this filter is optional, most SAP customers do not change the standard filters.
The usual options are:
-- Download only DNL_CUST_CNDALL (or a Z object that was created based on DNL_CUST_CNDALL) which contains client dependent and also independent customizing ( i.e access sequences, condition tables). Condition tables may be generated too and it can take longer, maybe up to 45 minutes or so.
-- If you have made changes only to pricing procedure(s) or condition types u2013 client dependent customizing-- it will be enough if you download only DNL_CUST_PRC. As there is no generation of condition tables the download will be faster.
But you must consider that you should not download both adapter objects at the same time ( overlapping times), as part of the content being downloaded is the same and the database will be inconsistent. This can cause errors in pricing, not a severe issue, as it can be solved by a new download of DNL_CUST_CNDALL, but an issue that causes trouble as it is sometimes difficult to determine the root cause of the problem. So if you for whatever reason ( i.e. additional changes in a condition type) download both adapter objects you should always check R3AM1 and download the second object when the download of the first one has finished ( green light in transaction R3AM1)
Best Regards
Luis Rivera

Creating a Invoice with reference to another invoice with new pricing proce

Hi People,
I want to raise a supplimentary excise invoice for the differential price.
I want to do it by raising a supplimentary commercial invoice with reference to the old invoice but with a new pricing procedure assigned to it.later on raise the supplimentary excise invoice with Tcode j1iin wrt the new commercial invoice.
Although i have done all the necessary configurations such as determination of new pricing procedure, Doc pricing Procedure and changing the pricing type at the copy control settings of the item category to "B".
i am unable to get the new pricing procedure when i am creating the supplimentary commercial invoice.
Can u people suggest me in this regard

Dear Nagabhushan
Normally for price difference, there is an order type RK for "Invoice Correction Request" which should be created in reference to F2 billing document. Based on this, you can issue credit memo (document type G2).
This being the case, you cannot create supplimentary invoice with reference to original invoice. Moreover, for all excise related adjustments, you should not use j1iin. You should run j1ih - Other adj.
thanks
G. Lakshmipathi

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

How to activate new pricing procedure for old Pur Document

Dear all,
we have added some condition type in our pricing procedure,every thing is ok but my question is this new condition added in pricing procedure are not reflecting in previously created purchasing document/po, how can we do it
I kw that if we create new po all condition will be reflec as per in pricing procedure
shakir

Hi
Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
Example :
In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
Regards
Srinath

Before I buy has there been any problems with new 27 iMacs?

Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

Hello richard from Folsom:
Are you inside or outside? ( I could not resist, I lived in Sactown).
Anyway, advice is frequently worth what you pay for it, and mine is free.
If you want it, buy it. The posts above are right on the mark (except waiting is probably overly-cautious). The best advice (from anamusic) is to buy the extended warranty - well worth the money.
Barry

New pricing procedure for Credit memo request

Hi All,
I used pricing procedure ABC01 for sales and billing.
I want to use new pricing procedure ( ABCO2) at the time of creating credit memo request, this credit memo req is with reference to Billing document.
If I dont use with ref to billing document I can able to create credit mem req with pricing procedure ABC02,
but if I am trying to create credit mem req with ref to billing document the pricing procedure in the billing document is being picked which is ABCO1.
Can any one suggest where I am doing wrong.
I maintained all the relevant copy controls.
Thanks & Regads
BVDV

Hi
Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
Example :
In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
Regards
Srinath

New pricing procedure for invoice correction

Hi ALL,
We want a new pricing procedure during invoice correction request.
Scenario:When we execute a sales order ,create a delivery & create a billing docuemnt with z@1111 a pricicng procedure.
Now we want to create an invoice coreection with different pricicng procedure Z@0002.
can any one help!!!
Regards,Rajneesh

Maintain a new Document Pricing Procedure in Invoice correction request. This will help in determining new pricing procedure based on assignment in T.Code: OVKK.
Pricing Procedure:
Determination of Pricing Procedure:
In SD, Pricing Procedure is determined based on Sales Area (Sales Organization + Distribution Centre + Division) + Customer Pricing Procedure + Document Pricing Procedure through T.Code: OVKK. Sales Area is determined in Sales Order Header Level. Customer Pricing Procedure is determined from Customer Master. Document Pricing Procedure is determined from Sales Document Type / Billing Type (if configured). Once the pricing procedure is determined, Condition records are fetched. If appropriate condition records are found, the price is determined. If Mandatory pricing condition is missing, system will through an error message.
Configuration of Pricing Procedure:
Step 1:
Condition table (T.Code: V/04): If existing condition table meets the requirement, we need not create a new condition table. Considering the requirement for new condition table, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Table (select the required fields combination, which will store condition record).
Step 2:
Access Sequence (T.Code: V/07): If existing access sequence meets the requirement, we need not create a new access sequence. Considering the requirement for new sequence, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Access Sequence (Access sequence is made up of Accesses (Tables) & the order of priority in which it is to be accessed. Here we assign the condition table to access sequence.
Step 3:
Condition Type (T.Code: V/06): If existing condition type meets the requirement, we need not create a new condition type. Considering the requirement for new condition type, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Condition Type. It is always recommended to copy an existing similar condition type & make the neccessary changes. Here we assign Access sequence to Condition type.
Step 4:
a. Pricing Procedure (T.Code: V/08): It is recommended to copy a similar pricing procedure & make the neccesary changes in new pricing procedure. Pricing Procedure is a set of condition type & arranged in the sequence in which it has to perform the calculation. Considering the requirement for new Pricing Procedure, the configuration will be done in spro as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Maintain Pricing Procedure.
b. Pricing Procedure (T.Code: VOK0): After maintaining the pricing procedure the next step will be determination of pricing procedure. Configuration for determining pricing procedure in SPRO is as follows: IMG --> Sales & Distribution --> Basic Function --> Pricing Control --> Pricing Procedure --> Determine Pricing Procedure.
5. Condition record (T.Code: VK11 / VK12): Condition record is a master data, which is required to be maintained by Core team / person responsible from the client. During new implementation, the condition records can be uploaded using tools like SCAT, LSMW, etc. Condition Record is maintained in T.Code: VK11 / VK12, which are captured in Sales Order & Billing.
Also check document pricing procedure in Sales Document Type (T.Code: VOV8 - Sales order Type, VOFA: Billing Type (If Required)), customer pricing procedure in Customer Master Data (T.Code: XD02), ... are in place.
Regards,
Rajesh Banka
Reward suitable points.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

How we can configure new pricing procedure at the time of billing document

Hi SD Gurus,
Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
Thanks & Regards,
Sreenivas.P

Hello,
Why?
The sales order confirms the price given to the customer. If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
Regards
Waza

Domestic vendor with Import pricing procedure

Hi Sir,
I want domestic vendor with import pricing procedure.ie.CVD,in basic customs ECE,SHEs,Please guide me how to do .
Thanks
kirti

HI,
Input the schema created for import Pricing Procedure in the purchasing view for the vendor and then this vendor will act as a import vendor.
Thanks & Regards,
Kiran

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

I suggest you contact Adobe tech support or their Mac forums for assistance.

Problem with new pricing procedure - free of cost

Similar Messages

Maybe you are looking for