Problem with new Scandisk 32GB CompactFlash Memory Card Extreme Pro 600x UDM

Canon provides an XF utility to read, combine, and export video files from the card to the computer. The utility works well with every CF card that I have used until I bought a new Scandisk CF card. The utility can access the XF files on the card but it cannot play them. Actually it does start to play then stops and starts. When I try to export a file to the computer it will not finish with even the smallest file. There is no problem with any of my other CF cards. Has anyone else seen this problem?

Now that I am in the correct forum the question is for those users who use the Canon XF Utility - is there any reason for it to act differently with one type of CF card as opposed to another? I have sort of solved the problem by using the PP Media Browser instead of the Canon Utility to read my CF cards.

Similar Messages

  • Problem with 5300 and 2 GB memory card

    Hi,
    I just bought 5300 phone and 2 gb micro sd card, sandisk.
    And I am now storing music files to the card via usb connection and phone is shown to pc as a disk.
    It transfers 990 MB of music and after that is says card is full.
    From gallery it shows memory card as 2 gb card, and full status is 990 MB, free fine also. I tried transfer also with music manager same result. Like the 1 gb is the limit somehow.
    Is it ?
    /Harri

    13-Jun-200709:39 PM
    stgotio wrote:
    I also have problems with my new Kingston 2GB micro SD card on Nokia 5300. However quite different. I uploaded appr. 1.5 GB music and it worked fine. Then I switched the phone off. When I tried to switch it on again the screen started to flash and after 15 sec the phone switched off itself. It took for a while till I discovered that the problem somehow relates to the memory card. When it was removed the phone worked fine (no flashing, no switch off). I reformatted the memory card and everything worked fine till the next switch off. Then it started again. I updated the software (V 04.70), but it didn't help. I'm not 100% sure but it seems to me that the problem relates to the music player which tries to update the music library after the switch off and somehow it freezes the phone.
    Any idea how to solve this?
    In short because I don't have a 5300 - No ...
    However - something to try is to see if your card works without problems on a PC (via USB card reader) or laptop (some have memory card slots built in)
    Lastly on Nokia's 5300 webpage it states that they only recommend using authorised cards ... it might be worth seeing if you experience the same issue with Nokia's own 2Gb microSD card ?
    Regards,
    Edward

  • Problem with E71 detecting photos in Memory card

    I have a Nokia E71.
    I tried encrypting the memory card first. After this i could not access my data on the memory card hence I decided to decrypt it.
    Everything on the memory card seems fine except that the Gallery is not recognising the photos on my memory card. I can access the data through the File Manager.
    Have tried switching d phone On and Off several times but to no avail.
    Even removed the memory card and re-inserted it but no use.
    The songs are detected by the music player.
    When i scan my memory of the card it shows used space but 0 bytes for Images, 0 for Sound files and 0 for Video files.
    Also my Phone has slowed down since then. Some of the images are also corrupted
    Please help me ASAP!!!

    Try to transfer your data to computer , recovering as much as possible , and then format the card

  • Deal of the Day 8/6/13, PNY 32GB microSDHC Memory Card

    If you've been looking for a new microSDHC card for any of your devices, we've got a great deal for you today. As part of our Deal of the Day offers for 8/9/13 we have a PNY 32GB microSDHC memory card at a great price. See all the details below.
    PNY Technologies - 32GB High Speed microSDHC Class 10 Memory Card
    Deal of the Day price: $21.99
    Regular price: $79.99
    You save: $58
    * Online only. Limited quantities. No rainchecks.
    Don't forget to check out the rest of our Deal of the Day offers for 8/9/13 and be sure to sign up for email alerts so you never miss out.
    Matt|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

    I already checked the "Lock" setting -- it is definitely unlocked.
    Since the card behaves in the exact same erratic way whether I am putting it directly into the Pro, or using the card reader to put it into the Air, or even using the card reader to put it into the Pro (as an experiment), then the problem must be not with the ports (since it affect all ports equally), but either with the System/firmware, or with the card itself.
    (Also, I have two different SDHC card readers, from two different manufacturers, and the same behavior appears with both of them.)
    Since it does work half the time with no problems, the issue must be something offbeat, not an inability to read the card entirely.

  • Premiere Elements 13 , Problems with new text/titles

    Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

    High ATR,
    Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
    Grafikkarte: NVIDIA GeForce 8800 GT
    If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
    As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
    Project settings are the following:
    General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
    Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
    The video is a mixture  of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
    When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
    Thank you for your service.
    thomasd
    Von: A.T. Romano 
    Gesendet: Sonntag, 1. Februar 2015 23:55
    An: Thomas Deschler
    Betreff:  Premiere Elements 13 , Problems with new text/titles
    Premiere Elements 13 , Problems with new text/titles
    created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano>  in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

  • Problems with new catalyst

    I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
    This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
    With cat 4.6 and the drivers before everything works fine.
    I tried fastwrites on/off(no good)
    Disable Vpu recover(no good)
    Raise agp voltage to 1.6V(no good)
    I also tried asus own driver but the same thing happens.
    However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
    I hope someone have an answer to my mysterious problem

    Quote
    Originally posted by Ycore
    This is my exact problem.  Computer has been running ROCK solid for the last few months with 4.7 catalysts.  I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated.  Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings).  At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
    At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d..  I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
    QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
    AMD 64 3200+
    K8T-NEO
    Antec 430W PSU
    ATI RADEON 9600 PRO AGP
    SB LIVE
    1GB CORSAIR C2 DDR (2x512)
    Lite-ON DVD/CD+RW
    Windows XP SP2
    I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
    Also note that we have very similar setup's so try it and let us know if that works out for you.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router &amp; then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • List of Problems with new Web Mail

    List of Problems with NEW Web Mail :
    - At first doesn't open full page message list or retain full page as default setting, have to drag down bar
    - Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
    - After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
    - Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
    - There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
    - Occasionally a message will move from inbox to trash, without NO indication or command to move them.
    - Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
    - No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
    - How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
    This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
    Thanks!

    vz_ric wrote:
    The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
    Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Before I buy has there been any problems with new 27 iMacs?

    Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

    Hello richard from Folsom:
    Are you inside or outside?  (  I could not resist, I lived in Sactown).
    Anyway, advice is frequently worth what you pay for it, and mine is free.
    If you want it, buy it.  The posts above are right on the mark (except waiting is probably overly-cautious).  The best advice (from anamusic) is to buy the extended warranty - well worth the money.
    Barry 

  • I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

    I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
    At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

    Contact the email provider for assistance with their service.

Maybe you are looking for

  • How do I Control my printer as to no. pages, single or double sided, etc. using Firefox Browser

    Your print command does not allow modifying the page printed. How do I restrict the number of pages printed. How do I print in black and white instead of color. The HP Officejet pro 8600 device is set to default setting but you browser ignores them.

  • Save for Web causes error in PSE7

    Hi, When I click on Save for Web I get the error message shown below. I have PSE7 and windows 7. I've tried the usual things like deleting the settings file. I have also re-installed the application, however I used the control panel uninstall and the

  • Watching iTunes Movies

    I'm embarrassed to ask this, but... I was browsing through the movies on iTunes and found one I wanted to buy. However, before I purchased it, I realized I don't know how I would actually watch the movie. Can burn DVD's from iTunes movies? Or will I

  • Reports 6i development for Queue Manager

    I'm trying to write reports to run from the Queue Manager and am having a truly horrible time. I am able to write complete reports and run them from my desk top, but when I try to run them on the Manager, they have problems at least 8 times out of te

  • Best way to handle an event from WaitForSingleObject

    Hello LV experts, I would like to know what's the best way to handle an event which I catch using the Win32 API (WaitForSingleObject) in Labview(7.1 or 8.20). I know there is too many possibilities to do this, but I want to do it  on the best way. th