Problem with new subcontracting code

Hi,
We are trying to create a logistics order for new material code.  I have created a BoM for the code at plant 3237 which is the dummy plant we use to manage the basesheet.  However, the logistics order does not pull in the basesheet as a material component .
The basesheet is in 3237 and I believe that this is the plant that hangs off the vendor, so why donu2019t the components pull from that BoM? please could you help me to undestand?
thanks and regards

Hi,
If it is not picking BOM during creation of Subcontracting PO then just increase the Delivery Date by Planned delivery Time in material master in PO.
And then it will take BOM since it compares the availability of BOM as per the delivery date from the planned delivery time of the material master. (This is from ECC 5.0 onwards)
In short, check planned delivery time of material in master and add those many days in delivery date and enter in PO.

Similar Messages

  • Problem with new subcontracting

    Hi,
    We are trying to create a logistics order for new material code.  I have created a BoM for the code at plant 3237 which is the dummy plant we use to manage the basesheet.  However, the logistics order does not pull in the basesheet as a material component .
    The basesheet is in 3237 and I believe that this is the plant that hangs off the vendor, so why donu2019t the components pull from that BoM? please could you help me to undestand?
    thanks and regards

    Hi,
    If it is not picking BOM during creation of Subcontracting PO then just increase the Delivery Date by Planned delivery Time in material master in PO.
    And then it will take BOM since it compares the availability of BOM as per the delivery date from the planned delivery time of the material master. (This is from ECC 5.0 onwards)
    In short, check planned delivery time of material in master and add those many days in delivery date and enter in PO.

  • List of Problems with new Web Mail

    List of Problems with NEW Web Mail :
    - At first doesn't open full page message list or retain full page as default setting, have to drag down bar
    - Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
    - After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
    - Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
    - There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
    - Occasionally a message will move from inbox to trash, without NO indication or command to move them.
    - Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
    - No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
    - How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
    This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
    Thanks!

    vz_ric wrote:
    The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
    Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • VK12 - disappered %? how to transport the table with new tax codes?

    Hallo
    I'm changing conditions for tax codes in VK12. I have 2 questions:
    1. When I created new entries, the % sign disappears. What shoud I do with this?
    2. Should I create a transport with this changes? Or should I create all new entries with new tax codes manually in all target systems?
    Thanks for all help,
    Megy

    hi,
    normally tax code changes will be done in PRD directly.
    no need to transport
    in VK12, that is change condtion record, you will find the details of condition record right.
    then why are you going to create again.
    change what ever you want to change then and there only and proceed with your requriment.
    regards,
    balajia

  • Hello, i have a problem with this number code  213:19,  please help me!

    Hello, i have a problem with this number code  213:19,  please help me!

    dan
    What version of Premiere Elements and on what computer operating system is it running?
    If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
    What type of user account are you using....local administrator or domain type?
    Please review the following Adobe document on the 213.19 issue. Have you read that already?
    Error 213:19 | Problem has occurred with the licensing of this product
    ATR

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • Problem with my exe code

    Hello,
    I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
    Ahmet
    Attachments:
    front panel1.jpg ‏47 KB
    Oksijen_Atolyesi.vi ‏45 KB

    Hi Ahmet,
    when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    Oksijen_Atolyesi.vi ‏35 KB

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Before I buy has there been any problems with new 27 iMacs?

    Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

    Hello richard from Folsom:
    Are you inside or outside?  (  I could not resist, I lived in Sactown).
    Anyway, advice is frequently worth what you pay for it, and mine is free.
    If you want it, buy it.  The posts above are right on the mark (except waiting is probably overly-cautious).  The best advice (from anamusic) is to buy the extended warranty - well worth the money.
    Barry 

  • HT3209 Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work

    You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
    Regards.

  • I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

    I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
    At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

    Contact the email provider for assistance with their service.

Maybe you are looking for

  • Upgraded to 10.1.1.4 and Itunes will no longer open

    So, I upgraded Itunes today and it quite working. I redownloaded Itunes and Quicktime, uninstalled both and reinstalled both. No luck. It still fails every time I try to open the program. Any data needed?

  • ITunes MP3 CD wont play in MP3 enabled stereo

    Hi All I have been searching around these forums and this is driving me round the bend. I burn an iTunes MP3 CD and it wont play in my car stereo. The discs load but just show up as a one track CD that continuously plays but with no sound. My car is

  • Is it possible to recover a form that has been inadvertently submitted so the user can continue to finish his input?

    We have recently subscribed to Forms Central and are in the process of creating our first form for commercial use. This form is quite long and hence we have enabled the ability for the user to 'Save' the form at any point and return to it. This works

  • Video stream to another network

    Hello, Am christopher from TANZANIA (EAST AFRICAN COUNTRY). Please help me. we have our cable tv and we want to stream it to our another office in another region, where we have configured a VPN in this two offices using cisco router RV180. I have tri

  • adf:render  /   image dosent work !

    i downloaded the UploadTextFile sample from steve Undocumented sampels and it works perfectly . the problem is with my own app that when i upload the the image the image is not displayed it displays the image boarder with exact width and hight of the