Problem With Newly Downloaded Desktop Manager Multi-Language v.4.6.0 With Media Manager

I just updated my desktop manager software this afternoon with the newer version that's in my subject line. The backup/restore feature works fine, but when I try to open the media manager, it opens, says no device is connected (when it is), and then gives me a pop-up message saying that an error has occurred (doesn't say what error specifically), and that the program needs to be restarted. I have tried it numerous times, and it always gives the same error message. Any ideas?
FYI, I have a Blackberry Pearl 8130, and am on the Verizon network.
Message Edited by stang210 on 11-14-2008 04:11 PM

First download the latest USB BB drivers from the following link"
Download Software
Perform the clean install of 4.5 without MM from here
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
This will eliminate MM from the problem and give you a fresh 4.5 and new USB drivers.
Please let me know if this helps!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

  • Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    downloaded new version but I keep getting error message with download.
    What does the error message say, andrea? (Precise text, please.)

  • EPM Multi language support for custom list in demand management

    Dear Team,
    We have installed EPM 2013 with English as base language and Arabic language pack as secondary language. We have implemented demand management and portfolio management as part of EPM implementation. Currently demand management have some workflow and
    custom list supporting these workflow. Just want to check, when user changes language setting from English to Arabic then all the forms ( build using custom lists) supporting English input forms should able to take Arabic text as input to these forms.
    Please let us know how we can achieve.
    Please help..:(
    Regards,
    Anup  
    Anup Kumar Presale Lead Wipro

    Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.

  • Just accepted updates to my Blackberry Desktop and ALL Photo and video saved on the media manager have gone

    HI! I just accepted updates to my Blackberry Desktop andnow the whole Blackberry Desktop manager is treating me as if a new. And freaked out as all ALL Photo and video saved on the previous media manager as well as that media manager have gone- Its over 3 years worth of pics and video I have stored on the Blackberry Desktop that was there before the update
    Really freaked out as these pics are irrepalcable Would appreciate any advice Thanks
    Solved!
    Go to Solution.

    Hello,
    Have you checked to see if the pictures are located in your Documents folder by navigating to then on your computer system?
    What version of Desktop Software did you update to? Select the [?] is the top right corner and then select 'About BlackBerry Desktop Software'. Version 7.1.0.? or 7.0.0.? or 6.1.0.?

  • NEWLY DOWNLOADED DESKTOP WILL NOT OPEN IN XP ....HELP

    I have been using my m505 on a new XP machine for 6 months. Suddenly the desktop would not open. I suspect this was caused by an automatic Windows update. I went on Palm site and downloaded the new software. This also will not open. It starts up initially and even begins to open with the frame of the desk top but stops running. Can anyone offer suggestion??
    Post relates to: Palm m505

    try editing the compatibility of your palm desktop software.
    right click on the icon > select properties > click compatibility tab > **check compatibility mode and select Windows 2000 > click apply then Ok.
    also, check the settings of your firewall/antivirus, it's possible that they are block.

  • Trouble with newly downloaded albums duplicating themselves and not saving in the right place.

    When I buy an album from iTunes it created grey duplicates i can't delete and doesn't show up in my media location on my external drive. It's plays from the iCloud but the download from iCloud is greyed out. I didn't sign up for iTunes Match. But I think I do have an iCloud acount. Not sure what I'm doing wrong.
    Next to the songs in question in my library there is a dotted line circle where the track number should be. The duplicated are all greyed out and it won't let me delete them. It also won't find the artwork even when I ask it to. It should up on my iPhone though. When I was clicking on the available downloads (not sure why i have to do this, instead of it downloading automatically), I got a pop-up message saying it was unable to find my external drive, but that is ******** becuase it's still shows the right location and path in the iTunes Media Folder Location in the advanced tab in Preferences.

    Somewhat resloved. I quit iTunes and restarted it. The albums are their now and the duplicates are gone. Now the option to download it from the cloud is there and the album art has also appeared. Still not sure what caused the issue. I think it was a glitch or freeze with the cloud.

  • Problems opening newly downloaded itunes version 11.1.3.8 on windows 8.1

    I have downloaded itunes version 11.1.3.8 via Internet Explorer and Google Chrome and the file downloads and installs okay, but won't open and run. Any suggestions on why itunes won't open and run after downloading?

    i have the same problem no radio stations at all bit shabby hate technolgy now adays

  • Dead iPhone after synching with newly downloaded version.

    I just bought a new computer and updated/synched my iPhone to the latest iTune. Now it won't turn back on and iTunes doesn't recognize when its plugged in. What do I do?

    Try plugging your phone into iTunes and hold down the power and round button for a LONG time until the "plug into itunes" icon appears (ignore the apple logo appearing and keep holding down the keys).
    It may be that your download of iPhone 2.0 was corrupted and you'll end up here again (or with another error).
    If you're using a mac you can go into the user files on the hard drive under itunes and delete the files in the iphone subfolder - then try this again.
    Once iTunes then sees an iPhone connected it will realize it doesn't have any iPhone files and go reacquire 2.0 (hopefully with a clean download). Genius bar told me today that the overload in download attempts "may" have corrupted some of the firmware download files - and if that happens - your attempts to restore from your iTunes files won't get you anywhere cause it keeps using the bad firmware download.
    I don't know why Apple doesn't just post the steps for this fix on the web as the genius bar was stacked with consumers in line with frozen Gen 1 iPhones.
    Good luck

  • HELP!! i cannot Hotsync Media- newly downloaded desktop has no media conduit

    even in the "custom" screen there is no media option.
    everything else seems to be there.
    Post relates to: Treo 755p (Sprint)

    What is the OS of your computer?  If you are using win xp (pro or home version), you can go to this link <Removed link that is propitiatory information for Palm> ... that palm desktop version has a media conduit included on it since it is the same version that is on your installation disk.
    Post relates to: Treo 650 (Unlocked GSM)
    Message Edited by thepoeta15 on 09-23-2008 02:26 PM

  • Syncing Issues With Newly Downloaded CDs

    For some reason, my IPOD is not syncing the new music I've recently put on my laptop. The sync folder seems to be in order and podcasts sync correctly. Any ideas?

    Goodbye, just don't let the door hits you on your way out.

  • Problems with Media Manager

    Everytime I try so run Media Manager it immediately pops up an error message then shuts down...I have installed the program and reinstalled it but I still get the error message. In the beginning, I was able to use this program with no problems, now..Crash..Can someone send me in the rite direction to resolve this problem Please...Thx for any input.

    Sorry to hear about your Media Manager issues.
    Please go to https://www22.verizon.com/content/ContactUs/ and contact Verizon for support. The live chat option will be active after a few moments, as the page finishes loading. All other contact options are listed as well.
    Thanks.
    Doug

  • Desktop Manager 5.0 and Roxio Media Manager hangup

    Ok, I spent an hour researching posts on the forum, and not gettting anywhere.
    Here is the specifics:
    New Laptop with Windows XP-SP3
    New Install of BB Desktop Manager 500_B28_Multilanguage
    I use Sync to update my address book via Ascii one way.
    Did that once.  No Problem
    Restarted my Laptop.  Now I get Windows Installer looking for Roxio Media Manager.msi and now I can't get rid of it.
    I hit cancel, and it comes back.
    Only thing in Add/Remove programs is Desktop Manager 5.0 and Blackberry Media Sync
    Try to remove either one and I get that "Installation in progress" message.
    If there is a problem with 5.0 why is a newer version correcting it not out?
    Several posts refer to doing a "Clean Uninstall" (KB02206) of Blackberry Desktop Software, Several posts refer to (KB19218) Windows Installer Cleanup.
    Before I get started, Is there a real solution?  If I do the Clean Uninstall and then again install 500_B28 am I going to hang everytime I start the computer while Installer looks for Roxio?
    Would someone please help me.
    Solved!
    Go to Solution.

    Twas obivous that I was going to get NO HELP from RIM, so I called my IT Dept.
    Here is what I did so far.
    Open Task Manager.
    In Applications, right click on RMM install process.
    Left click on Go to Process.
    This step puts you on ISUSPM.exe
    Left Click on End Process.
    Click OK.
    Go back to Task Manager, select Processes
    find misexec.exe
    Left Click on End Process.
    Click OK.
    Go to Add / Remove programs
    Uninstall Blackberry Desktop Manager
    Uninstall using REMOVE all User settings
    after 15 minutes, it finally removed RMM also
    I ran Windows Install Cleanup Utility (290301)
    verified no Roxio programs or BB programs were on the computer
    and restarted.
    So Far, So Good.
    Now I have to decide if I want to put BBDM on with or WITHOUT the MM.

  • Blackberry Desktop Manager does not show Media Manager

    First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
       When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
             Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
    All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
    Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
    Blackberry Desktop Manager
    version 4.3.0.17 (Nov.12 2007)
    Device Communications      Blackberry Device mgr....4.3.0.7
                                             BBDevMgr   ................4.0.0.1
                                             RIM USB Driver.............4.0.0.2
                                             RIM USB Serial Driver.......2.1.0.4
    Application Loader          Application Loader ..........4.3.0.13
                                         RIMProgram .....................1.0.0.35
    Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . .  I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
    I have memory cards inserted in the phone(s).
    I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
    Solved!
    Go to Solution.

    mamapajama wrote:
    First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
       When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
             Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
    All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
    Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
    Blackberry Desktop Manager
    version 4.3.0.17 (Nov.12 2007)
    Device Communications      Blackberry Device mgr....4.3.0.7
                                             BBDevMgr   ................4.0.0.1
                                             RIM USB Driver.............4.0.0.2
                                             RIM USB Serial Driver.......2.1.0.4
    Application Loader          Application Loader ..........4.3.0.13
                                         RIMProgram .....................1.0.0.35
    Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . .  I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
    I have memory cards inserted in the phone(s).
    I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
    Hi...
    I can help you with the download link...
    The link is here
    When you get to the page that has the downloads, pay attention to which version your downloading as some have media manager (near bottom) and some do not have media manager (near top)
    Let us know how your doing...
    Do you have XP or Vista?
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • Media Manager & Digital Desktop Display

    Hi,
    I've captured HDV footage to ProRes and all that is ok. I wanted to use Media Manager to recompress to a lower bit rate format for mobile editing. All that is fine, too.
    The problem I'm having is when I'm editing with the new (recompressed footage) and using the digital cinema desktop display:
    When I use preset formats from the media manager list, the digital cinema desktop function works fine. When I create a custom setting in the media manager (recompressing) the digital cinema desktop display function stays still on the first frame and only changes when I stop it (and it changes to the frame where I stopped).
    Any solution or ideas are welcome.
    Thanks,
    Matt

    Thanks for the answer.
    Well, after much experimenting with workflow (some time ago) I had decided upon always capturing to ProRes from the camera. My system seems to work smoother (therefore I work faster) with the ProRes than with the HDV.
    In any case, it was near identical.
    In this case, what I really need is to create two sets of media. I need something very small and portable for this edit, while keeping the ProRes (or original HDV) on my main computer for when I'm there.
    I just get better results (higher quality with a lower bit rate) when I do custom settings in Media Manager, but then the digital cinema desktop display stops working.
    Thanks for the input, but this media manager issue is my real problem.
    Cool,
    Matt

  • ORA-19511 when backup with rman (using NetBackup Media Manager)

    Hello forum
    I added new database hosts to NetBackup, tried to test backup of the first instance on one host, below is what I get - Do you know cause and solution? Backup from NetBackup master server can be performed without problems. Below you will find the output from sbttest too.
    Thanks Casi
    ---------- rman log -----------
    Recovery Manager: Release 10.2.0.3.0 - Production on Fri Mar 7 10:26:28 2008
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    connected to target database: IARTS (DBID=2414804385)
    connected to recovery catalog database
    RMAN> run
    2> {
    3> allocate channel c1 DEVICE TYPE sbt PARMS='ENV=(NB_ORA_SERV=sksta00500.ksta.zh.ch,NB_ORA_CLASS=LX_ORA_ONL)';
    4> backup current controlfile;
    5> }
    allocated channel: c1
    channel c1: sid=110 instance=IARTS1 devtype=SBT_TAPE
    channel c1: VERITAS NetBackup for Oracle - Release 5.1 (2004122520)
    Starting backup at 07-MAR-08
    channel c1: starting full datafile backupset
    channel c1: specifying datafile(s) in backupset
    including current control file in backupset
    channel c1: starting piece 1 at 07-MAR-08
    released channel: c1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on c1 channel at 03/07/2008 10:27:11
    ORA-19506: failed to create sequential file, name="19jalk7t_1_1", parms=""
    ORA-27028: skgfqcre: sbtbackup returned error
    ORA-19511: Error received from media manager layer, error text:
    VxBSAValidateFeatureId: Failed with error:
    Server Status: file open failed
    RMAN>
    ---- sbttest ---------------------------
    $ORACLE_HOME/bin/sbttest /tmp/x.lst
    The sbt function pointers are loaded from libobk.so library.
    -- sbtinit succeeded
    -- sbtinit (2nd time) succeeded
    sbtinit: Media manager supports SBT API version 2.0
    sbtinit: Media manager is version 5.0.0.0
    sbtinit: vendor description string=VERITAS NetBackup for Oracle - Release 5.1 (2004122520)
    sbtinit: allocated sbt context area of 8 bytes
    sbtinit: proxy copy is supported
    -- sbtinit2 succeeded
    -- regular_backup_restore starts ................................
    -- sbtbackup succeeded
    Segmentation fault

    Are you sure, you installed the proper media management software? Check it:
    (1) cd to your $ORACLE_HOME/bin directory
    (2) Type sbttest test
    The sbttest is a standalone program which test to see if the MML(Media
    Management Layer) software is installed and can accept a data stream and return
    an identical data stream.
    sbttest will return 0 which indicates success or 1 which indicates an error has
    occurred. An error means it's not an Oracle problem.

Maybe you are looking for

  • Addition of new fields in wrfapc02

    Hi, I need to add an extra field in the transaction wrfapc02 which is for SAP Retail. Could someone guide me the process. The BADI available adds an extra tab but we need to add a field on the Purchasing tab. Thanks, Dishant

  • Autoplay dialog won't open when I plug in my iPod Touch 4th gen

    Hello! I need to take my iPod into be fixed because it has a cracked screen and I'm trying to import my photos onto my laptop (Windows 7) but when I plug my iPod in nothing happens except the iTunes window pops up. I went into Autoplay and made sure

  • Formating string to date format in vc

    hai, function module in production return a date in type of char10. now i need to convert into proper data format. can any one help me.

  • How to do transports in BI7..

    WE HAVE A REQUIREMEN to transport a new report from dev to prod. the data flow is we have an infoset defined on 1 cube and 4 dso's , out of these 5 infoproviders 1 dso is not there in production, the info set is not there in production and the report

  • Create a Client Proxy for consume wsdl via https URL return a 110 HTTP code

    Dear all. I has new in this forum, and i have a problem when trie to create a client proxy from external WSDL, using https URL, system returns me a 110 http code. For others externs WSDL called via http don´t have any problem, and create client proxy