Problem with newly installation of Bridge

I can not get a newly installed Bridge program to connect to the internet, update or display thumbnails. CS6 runs fine as does Camera Raw. This is a new computer running Windows 8.1

Right, just icons with the NEF designation and none of the Meta data from the file. I run Bridge (which in my opinion is a lot more than a file cabinet) all the time on another computer. I am aware of the Help - Update command, but when I try to perform an update I get an error message that I am not connected to the Internet (which I am) and that my user does not have admin privileges (which it does).
I appreciate the help. Please give me anything ideas or I'll have to suffer through the Chat help on Monday.
Thanks

Similar Messages

Problem with linux installation on Thinkpad T410i

Hello everyone. I have a problem with an installation of Linux (Debian). Installation ended in my Thinkpad T410i, but when you are starting, the computer constantly restarts. With windows does not happen. What's the problem?
Probe with two versions: one with and one without GUI, and always restarts during startup stage or just finish loading the operating system. If eligo Windows in GRUB, the pc works normally.
I appreciate any help you can give me.

Madhukar,
Check the below forums which also discuss about same problem like yours.
Trouble with SAP system installation GUI
error in installation of solution manager
Regards,
Debasis.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
Thanks!
Angela

You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
Best of luck.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!

Hello I'm having problems with the installation of EFI 2.2 my macbook shutdown every time I try to install the actualization is this normal?

Hello I'm having problems with the installation of EFI 2.2 my macbook shuts down every time I try to install the actualization is this normal?

Hello I'm having problems with the installation of EFI 2.2 my macbook shuts down every time I try to install the actualization is this normal?

I have problems with the 'installation of creative cloud. Error Code: 205

I have problems with the 'installation of creative cloud. Error Code: 205 What can I do to fix this?

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

HT1926 (iTunes) Problem with Windows installer package?

(iTunes) Problem with Windows installer package? I try to install the new version of iTunes but get an error "Problem with Windows installer package. A Program required for this install could not be run." Can anyone help shed some light for me as to how to correct this? I have tried to install the program through Chrome, Explorer and FireFox but have had no success. I have included a screenshot of the error. Hopefully it's visable. Thank you for any help.

Found answer for anyone else curious. I love the apple community. Thanks guys for help!
https://discussions.apple.com/docs/DOC-3551

Problem with the installation

Bonjour,
J'ai installé Adobe Reader 11 mais quand je veux regarder des images animées, on me demande de télécharger à nouveau la dernière version.
J'ai la dernière version.
Que faire ?
If you do not understand french I can try in English, approximatively :
I have downloaded Adobe Reader 11 but it is impossible to read videos. Each time, I am asked to download it again and again ...
Thank you for your answer.

Sorry, I do not feel very confident in English ! I wanted to say "Adobe
Flash Player" (as I have Adobe
Reader installed too).
But, I can't open the animated e-cards from website Jackie Lawson. I
contacted them via e-mail because I thought the problem came from their
website and they suggested me to see with Adobe. What I did.
Isn't possible to speak French ?
Thank you.
2013/10/15 Bernd Alheit <[email protected]>
Re: Problem with the installation created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit>in
Adobe Reader - View the full discussion<http://forums.adobe.com/message/5762091#5762091

Problem with the installation file

Hello Everyone!
I am trying to install Nokia Ovi Suite in my Windows 7 computer from yesterday, whenever I run the web installer file I am getting the Error Message as "Problem with the installation file" (attached as a jpeg file with this post).
I have downloaded the exe file (approx 88.4MB from : http://nds1.nokia.com/files/support/global/phones/software/Nokia_Ovi_Suite_webinstaller_ALL.exe ) several times, still no luck.
Anyone is having the solution for this problem?
Thanks in advance!
Solved!
Go to Solution.
Attachments:
Error Message.JPG ‏23 KB

Hi SSA
I've downloaded it so many times I nearly exceeded my download limit ! Seriously , I know others must be able to get it , so why is there a problem ? I'm going to stop at the store where I purchased the phone and get THEM to try. If the sig is OK , I'm going to copy it and bring it home , if it's NOT OK then maybe they'll take it up with Nokia as they're the ones selling it to the ' happy customers' ..? When I first contacted support , they said to disable both firewall and A/V before attempting to download it ? I've downloaded thousands of files and never had to do that ? Sure ,you might have to disable something during installation , but not for the download ? I even did it in safe mode with networking and the same thing happened. I even asked if they could send me an install CD and they said NO. Not happy about that either..We'll see what happens.. I like the phone ..I'd just like it to do what I bought it for !!

Trouble with itunes upgrade I receive an error message problem with windows installer package

I am trying to upgrade itunes. I am running windows vista 64. Everytime I try to upgrade I get an error that says Problem with windows installer package. Anyone know how to fix this?

No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Problem with newly installation of Bridge

Similar Messages

Maybe you are looking for