Problem with NFL Network Surround Audio

Hi,
Except for the first game of the season, NFL Network is not being sent to my Motorola HD QUIP 71001 in Dolly Surround sound. It is connected to my Kenwood receiver via optical cable. All the other channels on FiOS behave correctly, but it seems like for some reason V* is not broadcasting the games in surround. Meanwhile Verizon is broadcasting NFL Red Zone games in surround.
Is there any compelling reason why Verizon is doing this?
Solved!
Go to Solution.

According to other posts, the NFL Network (HD) is not sending full surround (Dobly 5.1) but only encoding at Dolby 2.0. AFAIK Verizon only passes on what it is fed from the source network (with the exception of some of the premium HD channels which are supplied in MPEG-4 and have to be transcoded to MPEG-2).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Time Machine and "might be a problem with your network"

Hi! My Power Mac is from 2008, and I'm in the middle of replacing my hard drive. Here's a summary of what I've gone through, including various trouble shooting...
OK, the hard drive dies (all of which I wrote about in an earlier thread and, I think, not very relevant for this thread). While waiting to buy my replacement, I created an external bootable drive, hooked up via FW800. I created a new User Account, and then I used the Migration Assistant to bring in all the user settings, files, etc, from my Time Machine. It took many hours and and during the stage when it was transferring files, it gave me the prompt: "There might be a problem with your network. The other Mac is not responding. Make sure that all of your network devices are connected and turned on. Also, make sure that your Ethernet cables are still connected properly to your computer and to the network, or if using AirPort, that the base station is in range and turned on." After clicking "Continue" got me nowhere, I clicked Cancel, and it was a very incomplete migration [no apps, no files]. I didn't sweat this since this external drive is a temporary solution anyway.
Tonight I came home with the new internal drive, installed it, installed Leopard, and began the Setup Assistant. I got the same prompt as last night. NOTE: This time with Setup Assistant; last night was with Migration Assistant.
I notice from reviewing the boards that this Time Machine glitch seemed to happen a few years ago, in Leopard, and maybe hasn't happened since. But I haven't read a thread with a solution. (Maybe I missed it?)
A few things come to mind:
1. Could there be an issue with the fact that the computer is only 10.5 and many of the files/apps may have been installed when I was running 10.5.8? I'm just tossing that out there. For instance, what if I set up an initial User account, then updated the software to 10.5 and THEN used Migration Assistant to bring in the older account?
2. Soon, since I'm reinstalling Leopard, I'll get the prompt to use Setup Assistant, and this time I'll just select account settings and apps. I'll bring in the files manually, later. Since the progress window seems to get hung up during the file-transferring stage, maybe I'll have better luck if I skip that.
If anyone has any suggestions, man, I'd be way grateful!
Thanks!

"try trashing the timemachine.plist in your original user's Library>Preferences."
I didn't even get to that step. Here's what happened.
I went back to my original Admin account (the one I restored via Setup Assistant, from my Time Machine backup), and ran Migration Assistant again. I selected Applications only and when it gave me a prompt about the account name already existing. So, I created a new account name (TEMP 1, I called it).
All of my applications were restored.
Next, I tried it with all the files and folders. It didn't give me the duplicate name prompt this time. It copied all my flles and folders over.
Was it perfect? Well, a lot of the apps need some fresh registration and some upgrading, but I suppose that's to be expected. Or is it?
While I feel like this problem is in my rear-view mirror, I'm still interested in your suggestons for a Time Machine altenative.
Thanks again for your advice!

Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

Hi!
I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

Hi:
See if this driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Is there problems with the network/signal in TA3 Taunton area

Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

Can I edit footage recorded in 1080p24 with 5.1ch surround audio using Premiere Elements 12? I'm only seeing stereo audio...

Hi all,
Quick one - I've recorded footage using a Sony HDR-PJ810 in 1080p24 with 5.1ch surround audio (currently experimenting with different frame rates, resolutions and audio). If I import this into a 1080p24 preset in Premiere Elements 12 then I see only stereo audio with no obvious way to add a 5.1 channel.
If I import this into a 5.1ch surround preset (like 1080i 30 5.1) then I can see the audio across 6 channels but it's obviously having to unevenly spread 24 frames across 30 spaces in order to match the frame rates (skipping some of the slots which I suspect will cause playback artifacts).
Is there any way to get a 5.1ch surround audio track within a 1080p24 project? (I don't see it as a preset). Thanks!

OraAmator
What computer operating system is your Premiere Elements 12 running on?
The answer is to create a 1080p24 5.1 Channel project preset.
Please see my work on the approach to doing this and related information. If necessary, I will write instructions specific to 1080p24 5.1 channel
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p50 or 1080p60 file with 5.1 Channel Audio
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p25 or 1080p30 file with 5.1 Channel Audio
ATR Premiere Elements Troubleshooting: PE12: Exporting a 720p50 or 720p60 file with 5.1 Channel Audio
Are you in a NTSC or PAL area? Reason for that question will be mentioned later.
ATR

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

The problem with the network card.

The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.

Pawełek wrote:
The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.
This confusing which one are you asking about?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Problem with Premiere always conforming Audio again & again

I've got a problem with premiere CC which is always conforming audios time & again & again. Although this problem is not new in Premiere and I did face it in previous versions. But I've never found a good way to avoid it, especially when I work with much heavier clips or with some formats like mpeg or mov....
What should I do? Is that a network issue?
Thanks, Jim.

No Antivirus.
Audio is 5.1 audio from the video AVCHD, and music tracks are mp3 files.
Hardware: Intel i7 970 hex core processor, system drive (C:) 600GB 7500rpm, data drive (F:) where audio and video files are stored 10000rpm 500GB velociraptor, NVidia GTX 470 video card.

Massive problems with Logic/Network -can anyone advise?

Is anyone out there using Logic on a network together with other composers, with shared samples and audio on an external RAID system via File Server? If you are, can you please offer some advice on what does work, because at the moment our system does not!
We are a studio with 3 workspaces & 3 G5 Macs, making music for TV and media. Our samples and our music archive are on 2 separate RAID 5 configurations of about 2TB each. The samples are on one of the RAIDS, most of the music Archive on the other RAID. A G4 Dual operates as file server. Our RAID system hardware is custom, not Apple's X-serve.
This system served us well for a year or two, but now we are having extreme difficulties for the second time in several months. The system has actually had a heavier load because in the last few months we went from 2 Workspaces to 3, but it's hard to make a direct correlation between this and the current problems.
What's happening is that repeatedly the data on the RAID system becomes unavailable -samples get cut off, and in exs24 you can see the "couldn't get samples in time" error. The problem is probably more serious than just a bottleneck of data because when it occurs, files also become inaccessible via the Finder: in other words, we can navigate through the folder structure within the Finder, but the individual files themselves can't be previewed as is usually possible from the Finder; when you click on the Preview triangle (for an Audio file let's say) there is the message "fetching", and you wait....and wait. Generally a Restart of Logic, or a Fileserver Restart cures the problem but only for a very short time (sometimes minutes, sometimes hours) before it crops up again. Basically, communication between the Workspaces and the RAID system at file level is hung up or lost completely.
This problem caused our File Server computer to have Kernel Panics (last Autumn) and we thought there was a Data Registry problem on one of the RAID systems, so we re-initialized the RAID hoping that would cure it. Things went fine for a few months, but last week the File Server had a KP again and according to my computer Tech the problem is similar to the one we had before.
We have multiple deadlines every week, and I originally chose this system for its capacity and reliability as our organization has expanded. At the weekend we will try out a different File Server configuration - a G5 and a more powerful Switcher. What I don't know is whether the problems are hardware-based or actually a result of using Logic on a Network, which perhaps it was never intended for.
Any feedback/advice/suggestions would be much appreciated. We're all on Logic 7.2.3 under OS 10.4.7.
Thanks very much
Nigel
G5 Quad /4.5 GB RAM Mac OS X (10.4.7) RME Fireface

If I was you, I'd recommend buying a cheap PC
dedicated to Gigasampler for each of your 3 rooms,
and duplicate the sample library on each of their
drives. Guaranteed to work, though again it may
violate the sample library license agreement. Check
with your lawyer and your conscience.
Good luck.
you could do this. but even just buying a dedicated hard drive for each of the 3 stations, and installing the EXS library locally would work too, and wouldn't require as much of a change to workflow as setting up external gigasamplers would. you'd of course get higher performance with the gigasamplers being that they're in entirely dedicated machines, but the tradeoff is not having everything within a single logic session anymore, which may or may not be worth it.
as for the sample library license agreement thing. indeed.. you'd want to look into that, if not just for the possibility of getting into trouble, but at least for the moral issues of the matter. a working studio with plenty of projects going out the door should have no trouble paying for the correct legal use of the gear and intellectual property they use.

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Problem with Nokia 5700's audio adapter

I have recently updated my Nokia 5700's firmware with the newest version. But now I can't use my audio adapter(this thing: http://img114.imageshack.us/img114/7485/adapteryb4.jpg ) which is connected with the headphones. While I listened to music, I tried to press any of the music control buttons but they didn't work. I am sure it is not broken and the problem is from the firmware, because the adapter was perfectly working before the update. Does anyone have a solution?
Thanks!

it's not bacause of the update you did. it's the damned thing itself. Main died several mounts ago. There's a problem with the battery inside the remote control. NOKIA you give all customers new ones through care centers.

Problem with NFL Network Surround Audio

Similar Messages

Maybe you are looking for