Problem with NI-IMAQ for usb

hi. i have labview 8.0 and vision 7.1. i installed ni-imaq for usb but the vi blocks didn't appear in function palet. does ni-imaq work with labview 8.0 and is it important to have the same labview and vision? if there is a new version of ni-imaq to work with labview 8.0 please send me the link.

Ali,
As far as compatibility, LabVIEW 8.0 is compatible with Vision 8.0, 8.2, and 8.2.1 -- it is not compatible with Vision 7.1 so that may be causing the issues you are seeing. LabVIEW versions are only compatible with the same, and newer versions of Vision. As far as IMAQ, here is a link to the Version Compatibilities of LabVIEW and IMAQ. Let me know if you have more questions!
-Allison S.
Calibration Services
Product Support Engineer

Similar Messages

NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with Labview 7.0 or higher; or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0 and vision 8.2.1 packs with Labview 8.0 with no success.

Hello mcg,
I am not familiar with NI-IMAQ for USB 1.1.1. The newest version I know of that we have is 1.0 at the following link:
NI-IMAQ for USB Cameras 1.0
You are correct that you need LabVIEW 8.0 and Vision 8.0 installed. After this you should be able to install this very simply. If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
Please let us know if you have any more trouble on this. Please post a screenshot of the error as well.
Regards,
Luke H

Cant install NI-IMAQ for USB Cameras

i tried to install NI-IMAQ for USB Cameras.but it cant get it to install its giving the error need higher version than 7.0 but i am using 8.0 .also it is saying that it needs vision 7.0 ........??wat are these error ..how can i get it install ????????help
thx
Regards

nolsqn,
Can you clarify what you have installed? You must have all of the following installed to get NI IMAQ for USB Cameras to install:
System Requirements:
- Windows 2000/XP (English,
Italian, Japanese, French, Italian, Norwegian, Dutch,
Spanish/Portuguese, Russian, and simple Chinese)
- LabVIEW 7.0 or higher with NI Vision 7.1 or higher for the USB LabVIEW support
- Vision Assistant 7.1 or higher for the USB Vision Assistant plugin module
- Vision Assistant 8.0 or higher for the USB Express VI
It sounds like you are missing Vision Development Module (this is what is referred to as NI Vision)? Is this true?
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision

Has anyone used the QuickUSB module (Bitswise Systems) to interface to a USB Camera via IMAQ for USB?

Has anyone used the QuickUSB module made by Bitwise Systems with LabVIEW for image acquisition. I have a USB camera and I'm trying to use the IMAQ for USB controls to no avail. Any input is appreciated.

Are you using the NI-IMAQ for USB functions or are you calling the QuickUSB libraries from LabVIEW? Unless the USB camera is DirectShow compliant, then it will not work with the NI-IMAQ for USB driver. You can use the Code Interface Node in LabVIEW to call external dll's, and it looks like from QuickUSB's website that is the best way to go. Hope this helps.
Jason N

IMAQ for USB cameras error -1074396024 system error

Hi,
I used a IMAQ for usb cameras.vi. It works well in my laptop which is a newer one. Well, when I changed to an old one computer and ran it, the error shows that system error, i.e. -1074396024. Could you tell me what it means and how to fix it?
Thanks.

Hi,
I tried to use MAX to configure the Dazzle card, see the attached file. It says that it does not have any video mode which is supported. Our camcorder has the analog signal output. Is it due to the camcorder problem or this Dazzle USB converter problem? Thanks.
In addition, I am wondering if this IMAQdx can configure this camcorder from the error.
Attachments:
error2.jpg ‏112 KB

From Analog CCD to NI-IMAQ for USB Cameras?

I installed the NI-IMAQ for USB Cameras to obtain video feed from a SONY CCD camera in real-time. This camera only has the S-Video analog output so I used a Plextor PX-TV100U A/D converter to transform this signal to USB feed. It worked at first but after running my Vision VIs a couple of times NI-IMAQ could no longer establish a connection with the camera. And as I shut down my LabView 8.5, the whole computer rebooted automatically. The error messages from LabView 8.5 varied from "Not able to establish a connection to the camera... might be in use" to "No video driver installed...". None of it made any sense because the VI worked sometimes without errors. And the same thing happened to all three computers in my research lab at Tufts University.
I realize that my camera is going through a signal conversion before the USB, but why would NI-IMAQ for USB Cameras crash the whole computer? Also, is there a way to control my camera shutter speed from NI-IMAQ? I thought perhaps the camera wasn't setup right for the image acquisition. Help!!

Hi HTL,
IMAQ for USB only works with cameras that are DirectX compatible. Can you be sure that the information coming out of the A/D converter is compatible? Also, when you say "it worked at first" what exactly do you mean? Were you able to do image processing on images brought in via the camera? If you had Measurement and Automation Explorer (MAX) open and the camera selected at the time you tried to run a program that called the camera, you should get an error like you saw (Not able to establish connection).
Wes P
Applications Engineer
National Instruments
Wes P
Certified LabVIEW Developer

Does anyone have problems with the lightening to USB cable when charging from an outlet? After 6 months of use, it seems to wear out as a result of twisting caused by using the iPad while charging?

Does anyone else have problems with the lightening to USB cables, particularly the longer version, when using the iPad and charging at the same time?
If so, am I doing anything wrong?

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Problem with Revision level for a Material

Hi All,
I have a problem with Revision Levels for a Material.
I want to know the Revision Level for a particular Material for BOM Creation.
Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
<REMOVED BY MODERATOR>
Thanks and Regards,
Harish Kalla
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HI,
You can use table AEOI.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

Download NI-IMAQ for usb cameras

where can i get the NI-IMAQ for USB cameras???
i woul like to download this application for my registered product

Can be taken from External link .
I copied this link from this thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=154541&requireLogin=False
Regards, Guenter

Haviing problem with the facebbok for 9800

i hava a problem with the facebook for blackberry 9800, i download it many times but i can not see the i con, i used many ways to find out it, but failed to find it,

Hello nomanmahmoo,
Welcome to the forums.
Have a look at this article which may help you out with your issue.
Facebook icon is missing on the BlackBerry smartphone after upgrading to Facebook
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Litlle problem with nokia maps for 5800 xm

hi evryone,
i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
please help thank you

Hi,
When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

I have a problem with the indicator for power on the side of my HP DV6-1341el.

I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
Where is the problem?
I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the ACPI-Compliant Battery Control Method device.
Post your results whether they are negative or positive to keep us posted.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Problems with fuction keys for brightness

i have laptop hp 15 r006tx Product number: G8D30PA#ACJ
i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

OK...
I was right. You have no graphics driver installed for the Intel HD graphics adapter.
I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
Make sure you have installed this Intel chipset driver first and reboot. If you have done this already, you can skip this step.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
Next, install the Intel HD graphics driver and reboot. This driver is for W8.1. If you installed W8, you need a different graphics driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

Problem with NI-IMAQ for usb

Similar Messages

Maybe you are looking for