Problem with Nik filters

A few days ago Nik filters began to work very sluggishly in Photoshop CC. I have contacted Nik (Google) and they cannot find a solution. The filters work fine with Elements, but not now with Photoshop CC. In the past they worked well and fast. What have I done?

Any chance you're working on an image that's much larger (in pixel counts) than you think? I ask because occasionally I see people cross up inches and pixels. How big are the images you're processing? What Mode (format and bit depth)?
-Noel

Similar Messages

Problems with drill filters

Post Author: srinath
CA Forum: Publishing
In BO XI, I am facing problems with drill filters. I have a report with eight tabs and each tab has data corresponding to a particular value in the drill filter. A particular value is selected from the drill filter and the corresponding data is displayed in each tab. I need to select a value from the drill filter and display the corresponding data in the tab; while doing so when i save the report and open it again, the data corresponding to the particular filter value is not present instead it displays all the data. The only other way i could solve this problem was by creating a report level filter in each tab but this doesnt seem to work in other reports. What is the proper way of using the drill filter in this case?

How did you configure the filter?

Problem With Nik Plugins and Lightroom 4.3

I bought a Drobo Mini and moved my photos and my Lightroom Catalog onto it. The reason I did this was because I just bought a MacBook Pro laptop to supplement my Mac Pro Desktop and I wanted to be able to use both computers with the Drobo Mini and not have to constantly be importing Catalogs back and forth. This was a solution that Tim Grey recommended. The advantage is I can take the Drobo Mini with me on the road and add my new photos directly to the Catalog when I'm traveling, and then when I get home, I can just hook up the Drobo Mini to the Mac Pro Desktop and continue with my work. The problem I've encountered is with my Nik plugins Color Efex Pro 4 and Silver Efex Pro 2. On the new computer everything works fine. On the desktop computer I can't go directly from Lightroom into Color Efex Pro 4 or Silver Efex Pro 2 for the new photos initially downloaded from the new computer. For all my photos downloaded through the old computer, both computers work fine. Only the new computer works with the Nik Filters for the new photos. Also, if I go over to Photoshop from Lightroom, the new photos won't let me just hit "Save" and exit Photoshop. Instead, I have to designate a location for the "Save" as if I was doing a "Save As" and then it doesn't show up in Lightroom unless I import it again. I'm trying to get some answers from Nik but I thought maybe someone on this forum might know what is causing this problem?? Any help greatly appreciated.
SaratogaLefty

Nik developers don't participate in this forum -- it's mainly for developers to discuss technical issues of using the Lightroom Software Developer Kit. You might have better luck reposting in the main LR forum:
http://forums.adobe.com/community/lightroom

Problems with NIK Plugins

Hi all,
a lot was said already about problems with using Nik plugins in PS5 64 bit mode, but I'm not getting closer to a final solution.
I have installed all latest NIK plugin updates without problems.
According to their website all of their plugins are running now in a 64 bit mode.
In CS4 I can open and work with all plugins, BUT ONLY after removing the 'Selective Tool' from the plugin folder.
When it is not removed, PS4 is crashing all the time immediately after opening.
In Dfine plugin I noticed that my pointer is always a bit flickering during processing.
In CS5 it is the same; if the Selective tool is in the Plugin folder, it won't opening.
After removing it, in 32 bit mode I can open and work with all installed plugins.
But in 64 bit mode I'm able to work only with Silver Efex and HDR Efex Pro, but as soon I open Dfine, Sharpener, Viveza or Color Efex CS5 is crashing immediately.
I'm running a Mac pro with plenty power, ram etc, all updated and cleaned up.
What is other people's latest experience regarding that issue?
Thanks

Hi to all,
here I like to give you an update on my experience with NIK Plugins.
After beeing unable to solve my NIK problems by myself and in the forum I was contacting NIK, and their respons email told me only the following:
"In case of experiencing problems with their plugins in 64 bit mode remove all Duplicate Ariel Fonts"
Since I read about that already earlier, that reason had been ruled out.
BUT I got the idea simply to remove all my Arial Fonts from my Library (to the Desktop), and surprisingly ALL NIK plugins now were functioning without bringing CS5 to crash at start-up.
Unfortunately over the last days, especially on working with big file size pictures (around 200 MB) and plenty layers, CS5 crashed again often after initializing of the plugins.
Than I read today the post from Grey Havens, who suggested to set the percentage of RAM what Photoshop should use to maximal 60%.
Since I do have 14 GB RAM available, I indeed reduced the settings from 85% to 65%.
2 of my 3 internal HD's are assigned as scratch disk, as recommended by Adobe.
Thanks Grey, as you described, all plugins are opening now very fast, and I just tried all applications with big files, many layers and CMYK files,
without having any crash so far anymore.
If this continues, than I dont have to use my CS4 or the CS5 in 32 bit mode anymore, which would make all easier for me.
Than it also doesn't matter that Photoshop has less RAM assigned, because in 64 bit mode the almost 9 GB RAM assigned is for me more than enough.
So what worked for me, might work also for other people with same problems:
---    I had to remove the 'Selective Tool' from all plugins in CS4 and in CS5
---    I had to remove all Arial Fonts from my Font Library
---    I set in Preferences Performance the 'Let Photoshop Use RAM' to 65% only
Regards
Michael

Problems with servlet filters

Hello,
I'm trying to implement filters for some of the examples presented in the j2ee tutorial. Thus, I've realized a very simple filter that works very well for the Converter example (mapped to the index.jsp URL). But this filter doesn't work with the Duke's Bank application and I don't understand why. I've tried to map this filter to the Dispatcher servlet and also to different URLs, the filter is actually executed, but the client gets no response from the server.
Here's the source code for my filter :
package com.sun.ebank.web.filters;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public final class MyFilter implements Filter {
private FilterConfig filterConfig = null;
public void init(FilterConfig filterConfig) throws ServletException {
this.filterConfig = filterConfig;
public void destroy() {
this.filterConfig = null;
public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException {
if (filterConfig == null) return;
HttpServletRequest hr = (HttpServletRequest)request;
System.out.println ("MyFilter : " + hr.getMethod () + " URL=" + hr.getRequestURL () + " QueryString={" + hr.getQueryString () + "}");
chain.doFilter(request, response);
public String toString() {
if (filterConfig ==null) return ("MyFilter()");
StringBuffer sb = new StringBuffer("MyFilter(");
sb.append(filterConfig);
sb.append(")");
return (sb.toString());
Can anybody help me?
Thanks,
B.F.

As you're not actually doing anything in this filter but a quick System.out.print, there doesn't appear to be a problem with the filter code.
What does your web.xml file look like?
Does your IDE allow you to trace through the filter to the next target in the chain? If so, where does the code die? If not, use System.out.print statements to determine how far into the code you get.
No response to the client usually means that the response didn't have any content set. You can verify this by checking the state of the response object after doFilter has been called; if the headers haven't been set then something crashed in a bad way.
Good luck!

Problem with Blur filters in effects browser

Has anyone had a problem with the blur filters? Whenever I try to skim or apply any blur effect it freezes the viewer. Other effects are fine. Other functions of FCPX still work ok. The audio is ok, skimming works etc but the viewer is frozen. FCP then hangs on shutdown and requires a force quit, but relaunches fine. I have trashed FCPX permissions, repaired permissions for the OS, repaired the HD and redownloaded the application all to no avail. I also have FCPX installed on another startup drive and it does the same thing there. My computer is an iMAC 27 inch I7 with 4 gigs of RAM runing 10.6.8. FCPX is version 10.0.3.
I did open a copy of the zoom blur effect in Motion and the only unusual thing I noticed was that there is a project loop end marker set at frame 1 of the project. Don't know if that is a factor. Any help greatly appreciated!

I am refering to any of the blur category filters in the effects browser. I think there are like 6 of them sharpen, gaussian, prism, radial, and zoom. What happens is if I select a clip then go to the effects browser and scroll over the filters I will initially see a preview as you are supposed to. But very quickly that stops and if I go back to the timeline the viewer is frozen showing the previously selected clip. All the rest of FCP works normally ie you can scroll the timeline, select clips, use the tools etc. Only the viewer is frozen. You have to force quit FCP and restart to get back to normal. None of the other effects in effects browser cause any problems.
I said in my first message all the things I have tried unsuccessfully. This one is a real puzzler for me.

Is there a known problem with Nik Software Plugins and PSE10

I replaced my PC with a new 64-bit Windows 7 workstation. Have used PSE10 for a while for my cataloging and editing and I did 'trial' individual Nik Software plugins on my old Vista PC for a while. I decided to purchase the Nik Software collection and also to take the plunge and go to Lightroom 4 as well. I put PSE10 on my new PC as well because I want to consider how I might modify my workflow to use both in conjunction (perhaps LR4 for cataloging and PSE10 for editing)
When it came to installing Nik Software Plugins (they are supposed to plugin to Elements and LR4) it seemed to find some of the plugins compatible with both PSE10 and LR4 , some compatible with one of them and some not compatable (apparently) with either, but installed them anyway. But when I use PSE10 now I cannot go from the Organizer into the Editor, it loads the editor interface but not the image. If you open PSE Editor directly and open an image, the image will load and you see 4 of the plugins and I invoke them but the changes dont seem to get applied in PSE10. Then I started reading up on the web ..... and the consensus seems to be it is not a Nik Software issue but an Abobe editor plugin issue.
On a side issue, the retailer I bought Nik Software from sent me no product keys (they sent me Apple Aperture keys) - now they are about to replace my delivery with a fresh issue and proper keys ... but if I run into the same problems again, I dont know what to do. This leads me to looking for some definitive advice from those in the know!
Should I forget about buying Nik Software plugins altogether?
I see a download is available for LR4-2 .. does anyone know if this fixes Nik Plugin issues there?
I am minded to go the route of using LR4 as my cataloging preference but to call PSE10 Editor for editing and have all my plugins operate out of PSE10, but I could not get the plugins to work with PSE10 as mentioned. How does one get them to work?
Is there some workaround or special "way" or "order" to install things ???
I'm still waiting days for some support from Nik Software ... but they are just going to say there is nothing wrong with their product (and the web seems to concur)
Any help would be appreciated on the PSE10 Issue.

17/10/2012. I installed the update - Lightroom 4.2
It keeps the same product key and found the catalog and the Windows Control Panel only seems V4.2 so the original has been replaced with this upgrade.
This would be the first time I put down Lightroom with Photoshop Elements V.10 already there on the system and I suspect this might have helped with better integration between the 2 products.
I made sure I then opened Photoshop Elements V10 and I could edit an image (that the Organizer invocation to Photoshop Elements Editor did sucessfully load the image) and I could use existing plugins like Topaz and Noiseware. Also I made sure Lightroom 4.2 could use "Edit with Photoshop Elements " and it did.
The supplier who had sent me the wrong Nik Software product keys, sent me a corrected version with product keys for Lightroom
Several web articles I read on Nik Software plugins may be misleading (for example there is one on DPReview) which state that Nik Software plugins are compatable with Photoshop (the main product) but are NOT compatable with Photoshop Elements v10. I can tell anyone who uses Photoshop Elements 10 that they ARE compatable with Photoshop Elements 10, but it can be a little tricky to get them going.
This is how I sucessfully managed to get the Nik Software Plug-ins
working (finally) on both Lightroom and Photoshop Elements v10 at the same time
Remember my scenario ... I am putting together a new 64 bit Windows 7 PC and I want to be able to continue to use my Photoshop Elements v10 and also to delve into Lightroom for the first time. I had read all the blurb on Nik Software and it said the plugins were compatable with both and I had downloaded and tested some of them on an old PC anyway, so I knew the principle of installation and operation.
I had just bought the Nik SOftware Complete Collection in September 2012.
The box and the CD they come with .... this is where one of the problems is. Let me explain...
Step 1:
=======
Some of the components on the CD are up to date .. and when you elect to install them the sofware tells you that it has found both Lightroom 4.2 and Photoshop Elements V10 and it installs the plugins no problem and they work. Make sure (in these cases) you take their defaults as to the locations the plugins are instlled to. Typically the dual install works for the following components
Nik Color Efex Prov V4
Nik Silver Efex V2
and the plugins go to
for Photoshop Elements v10 C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins\
for Lightroom 4 C:\users\xxxx\AppData\Roaming\Adobe\Lightroom\External Editor Presets\
After each of the above 2 installs finished I invoked Photoshop Elements v10 first and opened an image in Editor and made sure the plugin was working and inserted my product key and activated it over the web. I then made sure it was also working in Lightroom 4.2 - it was!
Step 2:
=======
When it came to installing the Sharpener 3 component off the vendor's CD, it displayed NEITHER of the two applications on its compatability list at all. And there was no "+" sign where one can add one manually. Furthermore if you continue with setup.exe it crashes. I closed the EXE and confirmed there was no plugin in Photoshop Elements v10 as expected for Sharpener.
But when I went into Lightroom 4.2 it shows me the 2 Sharpener entities (the RAW and Output one). And I used it and proved the plugins were working through Lightroom 4.2 and I inserted my product key for it when invoking it for the first time via Lightroom 4.2 as well.
Then I went onto the Nik Software download site and downloaded a more updated version which was Sharpener Version 3.01. When I ran the installer from this download it actually does see and show both Photoshop Elements v10 and Lightroom 4.2 as "compatable" and it installed the plugins from that .. and they both work ... even though I had it working already (seemingly) from the CD install I obviously installed over it and the plugin still works in Lightroom 4.2. It also works now in Photoshop Elements v10. Only issue I had here was I had to re-insert my product key and activate it when I used the plugin via Photoshop Elements v10 for the first time... but if that is the extent of a techincal difficulty - I would take it anytime!.
Step 3:
=======
When it came to installing Viveza 2 off the CD, it only saw Lightroom 4.2 as compatable. I did something similar in this case. I let it install to Lightroom 4.2 as a plugin and proved it worked and activated its produvt key. Then I downloaded V2.009 off the website. I re-installed from it (over the Lightroom 4.2 one obvously again) and it now also sees Photoshop Elements 10 as compatable and installs correctly. Strangely enough I did not have to enter my product key a second time when I went to invoke the plugins via Photoshop Elements v10 in this case. What the hell! - the subtleties of software!
Step 4:
=======
Dfine 2.0 - the setup for the CD again finds NEITHER of the 2 applications on its compatablity list, but it put it into Lightroom 4.2 anyway (like the Sharpener component behaved) and I proved it worked. Then I downloaded version 2.112 from the Nik Software website and it finds both applications compatable. Also I did have to re-enter my product key when first invoking the plugin via the Photoshop Elements v10 editor (like as in the case of Sharpener)
Step 5:
=======
HDR Efex Pro (which comes on the vendors CD with a promise to a free upgrade to HDR Efex Pro 2) .... the setup.exe sees Lightroom 4.2 as compatable but does not see Photoshop Elements v10. Be careful ... this component is NOT A PLUGIN ... to see and use it in Lightroom 4 you must select photos and then do menu option EXPORT WITH PRESET HDR EFEX PRO. It does not work as a plugin within Photoshop Elements (any version) . I obtained my free upgrade too and it works from Lightroom. Dont even try to configure it manually as a plugin for Elements. Instead if you save files as JPG or TIFF you can open the EXE directly in the Program Files area (if you have 64 bit make sure to open that EXE not the 32 bit one) and you can use it in standalone mode. There is only one menu option within HDr Efex Pro when using it this way ... File-Open.
So to conclude ... (leaving HDR Efex aside because we know it will not plugin to Elements) ... I have them all working in both Lightroom and Elements. As I begin to learn Lightroom and move away from Elements for cataloging and edits, I know I can invoke most of my workflow plugins from both products. People say I should persist in Lightroom, but if for some reason I dont, I have the fall back position of having everything working out of Elements 10 anyway. It's been a bit of chore getting to this point, but others might find my workaround useful.

Problem with IDoc filtering in the distribution model

Hello Experts,
We are using a distribution model in which we have set filters as like the following
Filter Group 1
Plant : XYZ
Sales Org: SAP1
As far as the documentation says this Condition should work with AND logic between Plant and Sales Org
(i.e ~ Plant XYZ and SO SAP1 ) but the IDoc gets created even if any one of the condition is met(looks like working in OR logic).
How to achieve the AND filtering between the different objects.
Would appreciate your kind help.
Thanks in advance.
RGds,
Vasanth.

> Jakub ~ Yes I checked the generated IDocs(classified pertaining to my Model)for my model alone and that's where we are facing this problem
So that's the filtering problem.
I would check in which segments are the "filtering objects" located (BD59) and whether it is a mandatory segment. If it is a mandatory segment - IDoc should not be created. If it is an optional segment - this segment and its subsegmets will be filtered out - but IDoc will be created.
> ~ Do we need to apply some SAP Notes to avoid this problem ?
> But why the filter should behave in OR fashion ? I do not understand.
I believe that Sachin meant that the logic is:
Filter Group1 OR Filter Group 2 OR ... Filter Group N
Filter Group 1 Object 1 AND Filter Group 1 Object 1 ... AND Filter Group 1 Object M
Filter Group 1 Object 1 Value 1 OR Filter Group 1 Object 1 Value 2 OR ... Filter Group 1 Object 1 Value L
regards,
Jakub

Problems with Nike+ Workouts

Hi there. First time posting, so please be nice...
I just purchased my first Nike workout from iTunes. Downloads it, and creates a new "smart" playlist folder called "Workouts" and places a new playlist in the folder with the name of the CD and the songs.
A few problems:
1. The continuous song (32 mins) I cannot find in my main music folder anywhere; it just appears in my playlist. The other tracks (which are the individual songs) do show up in my main music folder. Any idea where the track is?
2. When I move it to my iPod, the playlist does not appear on the iPod, but the 32 min song (and the others) show up under music nav.
Any suggestions? Am I missing something?

My Nike+ stuff doesn't work correctly, either.
But it does provide entertainment with the wrong values it puts up on the Nike site.

Problems with ALE filters...

Hi I have a situation I need to send materials to a partner only the materials specific for a particular plant.The filter in the distribution model is based on E1MARCM-WERKS.
change pointers are enabled.When material is changed may be some other fields which are not relevant to plant data the idoc is created with message function '018'(resend) and the E1MARCM segment itself is missing.So the filters are not verified and the materials which belong to other plants are also sent to the partner...
How can this problem be rectified...?
Thanks for your help
Larry

Hi Aber,
I have an wague idea, can't we put a condition like if WERKS is not initial or if WERKS = 'your filter value'. If any of these case is correct, it will stop sending the idocs.
shylesh

Urgent : Problem with Servlet Filters in Weblogic6.1

Hi,
We have developed an application using Tomcat4.1.24 with Weblogic6.1 Service Pack2.
Now we are removing the Tomcat and moving the web layer into weblogic. We have implemented Servlet Filters and Listeners.
When I converted .jar and .war files into .ear file and deployed into Weblogic6.1. But that application is not deploying. I found that Weblogic6.1 does not support Filters and Listeners from Servlet2.3.
When I tried to deploy in the Weblogic6.1, it is giving the error as " java.lang.reflect.UndeclaredThrowableException".
Could somebody please give me a solution how my filters and listeners can make working with weblogic6.1.
Is there any solution.. My application is successfully working with Weblogic8.1. But I want the solution in weblogic6.1. It would be great if somebody can give me solution how to make Filters n Listeners working with Weblogic6.1.
Thanks in advance.

Hi Prasanna,
Thank you for the timely reply.
I have already done according to the process given in the url which u have given me.
set and getFilterConfig methods are implemented in my AuthenticationFilter class. But still I could not be able deploy the application and I am not able to get the ServletContext object from Session. When I tried commenting the Filters and Listeners in my web.xml file then my .ear file was successfully deployed but I could not get the ServletContext from Session.
Below code is from my web.xml:
<filter>
<filter-name>HRSuthenticationFilter</filter-name>
<filter-class>com.peramb.hrs.servlet.AuthenticationFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>UTF-8</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>HRSAuthenticationFilter</filter-name>
<url-pattern>/jsp/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>HRSAuthenticationFilter</filter-name>
<servlet-name>action</servlet-name>
</filter-mapping>
<listener>
<listener-class>com.peramb.hrs.servlet.HRSContextListener</listener-class>
</listener>
When I comment the above code from web.xml it is deploying with out errors.. but I am not getting the servlet context, hence my application is not working.
When tried uncommenting the listerns part or Filters part or bothe, My application is deploying with an error on the console. I.e,
â€œ<Sep 22, 2005 12:20:36 PM IST> <Error> <Management> <Error deploying application
.\config\mydomain\applications\hrsgb.ear: java.lang.reflect.UndeclaredThrowable
Exception>â€.
And the error in Weblogic logs is below:
####<Sep 22, 2005 12:20:36 PM IST> <Info> <HTTP> <spacker> <myserver> <ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'> <system> <> <101047> <[WebAppServletContext(6387482,hrsgb,/hrsgb)] registering JSPServlet with initArgs '[JspConfig: verbose=true,packagePrefix=jsp_servlet,-compiler=javac,compileFlags=,workingDir=E:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\wlap36546\WEB-INF\_tmp_war_mydomain_myserver_hrsgb,pageCheckSeconds=1,superclass=weblogic.servlet.jsp.JspBase,keepgenerated=false,precompileContinue=false,compilerSupportsEncoding=true,encoding=null,defaultfilename=index.jsp,compilerclass=null,noTryBlocks=false]'>
####<Sep 22, 2005 12:20:36 PM IST> <Debug> <HTTP> < spacker > <myserver> <ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'> <system> <> <101158> <Exception thrown while loading hrsgb: java.lang.SecurityException: sealing violation>
java.lang.SecurityException: sealing violation
at java.net.URLClassLoader.defineClass(URLClassLoader.java:229)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at weblogic.servlet.internal.WebAppServletContext.registerEventListener(WebAppServletContext.java:2031)
at weblogic.servlet.internal.WebAppServletContext.initFromDescriptors(WebAppServletContext.java:1471)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:943)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:878)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:515)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:77)
at weblogic.j2ee.Application.addComponent(Application.java:176)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:364)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:150)
at weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:374)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy37.addWebDeployment(Unknown Source)
at weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:350)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:150)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:374)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:507)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:376)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:997)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:969)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:374)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy88.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:930)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:1039)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:954)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:851)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:781)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:210)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:374)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.update(Unknown Source)
at weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:150)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:284)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:119)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:616)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2678)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2412)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:140)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:121)
####<Sep 22, 2005 12:20:36 PM IST> <Error> <J2EE> < spacker> <myserver> <ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'> <system> <> <160001> <Error deploying application hrsgb: Could not load hrsgb>
####<Sep 22, 2005 12:20:36 PM IST> <Error> <Management> < spacker> <myserver> <ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'> <system> <> <141042> <Error deploying application .\config\mydomain\applications\hrsgb.ear: java.lang.reflect.UndeclaredThrowableException>
I could not trace the problem. Please help me with some solution for the above problem

Problem with Nike plus and running in non-Nike sneakers

I love running with my Nike plus and my itouch, but I've been having trouble with my Nike plus logging incorrect mileage when I attach the foot sensor to my non-Nike running shoes (in one of those little velcro pouches secured to the shoelaces). For instance, I ran a half marathon and it logged 4 miles. When I put the sensor back in my Nike plus shoes (which aren't quite as comfortable for me) everything is fine. Is anyone else having this problem? Should I carve a hole in the insole of my other sneakers to embed the sensor?

Seems something got corrupted with this VI. Copy things over to a fresh VI and things should be OK.
See also this recent report of a similar issue.
LabVIEW Champion . Do more with less code and in less time .

Problem with NIK "Selective Tool" not appearing in PS5

I have a problem and I am trying to track down what is the cause and how to resolve it. I installed Nik Color Efex Pro 3.110 into Photoshop CS5 (32bit) within Windows XP and the "Selective Tool" does not appear. According to everything I've read and googled about so far, this is not normal behavior. I have tried running the Automate Selective Tool to get it to run, and it does nothing either. I have also checked the registry entry bit for this and it is set to properly. The strange thing is that the plugin works properly from CS4. The OnOne plugin suite also functions properly from within CS5. Is there some known incompatibility (aside from the known 64bit issues that are not applicable in this case) with CS5 and the Nik Selective Tool palette? Where should I check for problems that might be preventing the Selective Tool from launching properly?
Just for informational purposes, this is from a fresh install of Photoshop CS5 on a new installation of Windoes XP SP3 (fully updated).

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Wireless tethered live photo booth slideshow with Nik filters

This might get a little crazy, but wanted to get some input from you guys. I am a wedding photographer and one of the options couples can order is a photo booth. I am looking to take it to the next level. Here is my gear and possible software
Hardware:
Canon 5D Mark II on a tripod with an Elinchrom ring light
Canon WFT-E4 Wireless File Transmitter
Airport Express
Macbook Air 11" i7
HD projector
Software:
Aperture
Photoshop
Nik Silver Efex
Photo Mechanic
Lion
Aperture Hot Folder
So ideally I could just set up Aperture to import the images using a hot folder, then automatically apply a Nik Silver preset, then display it in a live slideshow, but I'm not sure thats possible. Or if it is, I don't know the scripting required.
I was thinking I would set up Photo Mechanic to do a live ingest of the images (maybe only small JPG's and keep the RAW on a card to keep it running quickly), then have it ingest to another folder where photoshop would run an action which includes the Nik filter and border, then photoshop exports to the Aperture hot folder where its imported into aperture and displays on the projector.
Anyone think this is viable? Can you think of a better way to accomplish it?
Thanks,
Joshua

Any torrents running on the PC? Any chance your isp is throttling your connection?

Problems with report filters

Hi,
i'm still a rocky with Oracle Bam and i'm trying to do reports with filters that is pass as parameter. i saw some tutorial and i did everything like day said but when i running de report i can't choose any options. It like the filter is freeze, block. I need urgent help
Regards,
José Robalo

How did you configure the filter?

Problem with Nik filters

Similar Messages

Maybe you are looking for