Problem with nokia E5 modem connected with usb cab...

hi .. I have E5 and i use it for internet on my pc with usb cable. I have data plan from my operator. The problem comes now, whenever i connect my mobile to my pc with usb cable,it shows connected in pc suit mode, but whenever i try to establish a net connection through one touch access, it says that "the device connected is not found". Same occurs when i try from ovi suit. Its irritating... I checked everything, Reinstalled pc suit and ovi suit, system restore,blah blah... Ohh god... Some one help me out... Same occurs with nokia 6303 classic.
I used it before,the connections were easy to deal,but now its not happening at all...!!

I also have same problem with my E5 mobile.Please tell me the solution........

Similar Messages

HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paul

you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

Problem with connecting ipad 2 with crestron cp2e...help plss its urgent... I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while t

problem with connecting ipad 2 with crestron cp2e...help plss its urgent...
I hv a ipad 2 with mobile pro g connected with cp2e. when i pressed any button in ipad its connet with cp2e but after 4-5 sec one error comes (warning wifi was powered off while the device was in auto -lock(sleep)press connect to reconnect) when i pressed again its connected with cp2e. i am using netgear wireless access point . i also has been changed access point as well as updated ipad firmware bt problem is as it is .. pls help.

Hi have you solved the issue ?
Cause I have the same problem.
Tnx

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
Regards.

Architecture Limitations with Replication of VM connected with Physical Mode RDM

what are Architecture Limitations with Replication of VM connected with Physical Mode RDM in vsphere replication. Why VMware is not supporting this?

vSphere Replication does not work with physical mode RDMs. This is because of the way that vSphere Replication and physical mode RDMs work.
As outlined in this: VMware KB: Difference between Physical compatibility RDMs and Virtual compatibility RDMs
It isn't currently possible for VR to do what it needs to do with physical mode RDMs.
Does this answer your question?

I have a problem today every time i connect a usb mouse on the macbook pro turns off.

I have a problem today every time i connect a usb mouse on the macbook pro the laptop turns off. What could i do to fix it?

Execute SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
If no success, try another mouse. It may be faulty.
Ciao.

Can i tether with my iPhone to connect with my iPad?

can i tether with my iPhone to connect with my iPad?

Personal Hotspot
http://support.apple.com/kb/HT4517
http://support.apple.com/kb/HT3574

Problems with spotty cable modem connection when connected to 3rd gen Airport Extreme

Hi All, here's my problem:
I've got a 3rd gen airport extreme (AEBS) that I've been using for the last several years and had no issue. Recently, I decided to switch from Verizon DSL to Time Warner Cable, and in order to avoid extra fees, I decided to purchase my own cable modem. Here begins an epic battle with sanity...
- 1st modem Motorolla SB6141: This was the first modem that I bought and it worked like a charm... at first. The first week was like a dream come true, with incredibly fast speeds and very low latency (ping=15ms, dl=30Mbps, ul=5Mbps). The AEBS and the modem got along great, no issues until all the sudden the connection speeds started dropping off. The connection would never fully drop to zero, but close. The bandwidth would hover around 1Mb down, which was about a 1/30 of the speed I was supposed to be getting. I chalked it up to a bad model so I headed back to Best Buy.
- 2nd modem Zoom 5341J: This modem istalled with little issue and worked pretty well. The only problem I encountered with this modem was that it seems to cause a ton of network latency (ping=200ms average), which was way too slow for me. On the first night that I had this modem working, I cycled the power (to try to resolve the latency issue) and it never came back on. there must have been a short in the board or something. Back to Best Buy.
-3rd modem Netgear CMD31T: This modem was an absolute nightmare to get connected to the AEBS. The process involved following a VERY specific order of operations that involved powering down the modem and the AEBS, doing a factory reset on the AEBS, poweing down the AEBS, powering on the modem, plugging the modem into the AEBS, and powering on the AEBS. None of the other modems gave me that much trouble, but when I eventually got it working it was FAST. I was getting the best latency and bandwidth out of all of the modems. Unfortunately, that lasted about 5 minutes, when the bandwidth dropped to 1Mbps and never recovered.
I know what you all are thinking... the problem must be with the AEBS. But here's the kicker, I have an Airport Express that I tested with all three modems and got the same results. Well then (you must be thinking), the problem is obviously with the ISP! But when I connected all three modems directly to my MacBook Pro, they all worked fine, with no connectivity issues. The only time I encounter a problem is when I involve an Apple router. I love my AEBS and my Airport Express, so I'm avoiding buying a different brand router. Does anybody have any suggestions? Thanks for your help!

Well after doing some research, I've figured out that the problem I was encountering had nothing to do with the Airport Extreme or the cable modem! Apparently, my problem was caused my uplink saturation. In other words, my cloud backup service (BackBlaze) was using up all of my upload bandwidth, which meant that ACK packets (acknowledgments) weren't even getting through. This would basically cause any server I was downloading from to stop sending additional packets, making it appear that connection to the internet had been severed. My simple fix was to cap the bandwidth of my BackBlaze backups to about half of my total upload bandwidth. One thing I did learn is that the this issue is usually fixed by using a router with QOS (Quality of Service) capabilities to prioritize ACK packets. Unfortunately, for some reason Apple has neglected to add this feature to even their high end routers.

When I clicked on the Newest version of itunes something happened and now when I try to access the itunes store I get an error (-32-12) and it says to check my conectivity. I have three ipods and the problem is with the on line connection with itunes.

After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.

... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

How to configure modem connection with GW (H323) and ATA 187

Hello Community,
i stock in configuration and need assistance.
My callflow: Telco – PRI – GW – H323– CUCM – SIP – ATA187 – Modem
Voicegateway (Version 15.3(2)T) + CUCM (Version= 8.6) + ATA187 (Version= 9.2.3.1)
The modem connection is still not working.
What is still to configure on the voicegateway? modem passthrough?
Regards Michael
ATA 187 Configuration:
Fax Mode= T.38 Fax Relay
Fax Error Correction Mode Override= Off
Maximum Fax Rate= 14000bps
Impedance= 900Ohms complex
Gateway Configuration:
voice service voip
ip address trusted list
ipv4 172.30.50.1
ipv4 172.30.50.2
ipv4 172.30.50.3
ipv4 172.30.50.4
ipv4 172.30.50.5
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h225-notify cid-update
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 600 min 60
dial-peer voice 1 pots
translation-profile incoming INCOMING_PSTN
incoming called-number .
direct-inward-dial
dial-peer voice 30 voip
description OUTGOING_CUCM
destination-pattern [1-9]..
session target ipv4:172.20.60.12
voice-class codec 1
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax-relay sg3-to-g3
fax nsf 000000
no vad

It is possible T38 isn't playing well with the PRI. You could try modem pass-through on the gateway and ATA187 if T38 isn't necessary.
Also, sometimes these commands are needed, but not always, so I would consider whether these fax commands under the dial-peer are necessary:
fax-relay ecm disable
fax-relay sg3-to-g3
fax nsf 000000

Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

Will a WD hard drive work with Airport Extreme to connect by a iPad Air

If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
Always the best way to find out.. try it.

Can not connect with itunes with iphone but can connect with same password with my computer

I can not connect with Apple ID by IPhone but I can with same ID on my computer.

Read the article from which the thread was started.

WAS Connection Pooling with Sybase - associating a connection with spid

We defined a datasource in our WAS 4.0 server (for Sybase) and configured it with a single login id/password. I'd like to know if it is possible to uniquely identify a database connection with a Sybase process (SPID). From Toplink's persspective, each connection is identified with a ServerSession ID and Connection ID. But from Sybase's perspective, it has N logins all using the same login ID (the Login ID specified in the WAS datasource). So if two connections are executing some SQL at the same time in my WAS app, is there a way to trace a Sybase process ID to a specific TOPLink connection ID?
Thanks, Matt

Don,
I created a subclass of SessionEventAdapter and implemented the postConnect method. In the postConnect method I was able to use the SessionEvent's result attribute (a DatabaseAccessor) and execute some SQL to retrieve the Sybase process ID. From what I could see, every connection has a unique DatabaseAccessor. I chose, therefore, to use the hash code of the DatabaseAccessor to store the SPID as a property on the ServerSession's DatabaseLogin object. Now, whenever I acquire a connection, I can query the DatabaseLogin object and have access to the SPID based upon the DatabaseAccessor being used.
Do you see any issues in doing it this way? I was concerned that the result attribute of the SessionEvent might not always be a DatabaseAccessor.
Thanks for your help,
Matt

Problem with nokia E5 modem connected with usb cab...

Similar Messages

Maybe you are looking for