Problem with nokia software updater... PLS HELP

Everytime I try updating my 5233's software the update fails.  It will start the update but when my phone goes into white screen my phone gets disconnected.  It will try to reconnect but quickly disconnects.  This will happen for a few times and then the the updater will prompt me that the upgrade failed because the device was disconnected.  What can I do to prevent this?
My phone hasn't been updated yet nor hacked because it's new.  i has software version 12.1.092.
I need help... Please...

28-Aug-2006
08:03 AM
myatooooo wrote:
still haven't arabic languge so what shall i do with my phone
What is your phone model?
Regards,
Arabian
We Arab Portal Network http://www.WeArab.Net/
Phones: 9300i, E70, N80, 6670, 6280, and 6111

Similar Messages

  • Help I Have A Problem With Nokia Software Updater

    Hi
    I have This Problem With My Software
    Please Show Me any Way To Fix it
    Note 1*:I Used This Software  on thisComputer but when i chang my windows it doesnt work
    Note 2*:after that when i used software (once time) it didnt work because of that i changed my windows
    Attachments:
    1.JPG ‏24 KB

    first its ok
     then
    translation:
    For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
    Nokia Software Updater has tried downloading the software, but this is failed 4 times.
    Its posible that it can be caused by a bad, slow or instable internet connection.
    This failure can also occur because we have maybe a problem with our servers.
    try later again
    i tried it on 2 PCs one with vista and one with XP plz help me
    Message Edited by progunnl on 13-Mar-2009 02:50 PM

  • Problem with nokia software updater

    I downloaded this,and when I go to launch the program it comes up with a configuration error, I have tried following the help guidelines but to no avail. Is there a way I can get this sorted, because I need to update the software on my n900.
    Cheers

    Do you have a good net connection? If the update is on-going do not touch or do anything with the pc. The phone will definitely brick if you d/c it.

  • Updating nokia3110c with nokia software updater - ...

    I tried to update my nokia3110c with nokia software updater but failed every time. I think it is because of poor quality of my internet connection. My network provider doesn't support the update using phone . Is their any other way to download an install the updates. Because I can download other files without any problem. Or how I can change the settings to fix this problem

    If you are unsuccessful at updating your phone via NSU, as it does require a stable and decent internet connection speed as you have stated, then explore other options such as updating at a friend or other family member's house on their computer. If you are still not having any success, then visit your local Nokia Care Centre and get them to update your phone to the latest firmware available.  
    If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

  • Network error or firwall with nokia software updat...

    Network error or firwall with nokia software updater
    i didnt use to get this msg from the previous Versions
    plz advice
    am still using the same network same ip same firewall nothing changed i just update my software updater yesterday
    i even tried to disable the firewall but still
    btw am usin wlan
    maybe the new updater requiers cable connection

    Hi skks
    Almost certainly PC Suite 6.83 rel_14.1 is the problem and it's successor is currently beta testing.
    Sometimes uninstalling Nokia applications - PC Suite, NSU, Nokia connectivity drivers and cleaning out remnants for a clean install is only solution but this is a bit drastic!
    I know some have returned to 6.82 rel_22.0 but if you try to use latest NSU with it, it corrupts it!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • After updating with Nokia Software Updater my E66 ...

    After updating with Nokia Software Updater my E66 asks for Lock code. Please any body help me

    If you are only interested in maps.. download the installer from here ...Click on 'Download' under Instructions and then again 'Download' ..

  • Problem with Asha311 software update

    Sir, I am having a problem with the software update of this unit. Updated it thrice but always get an error message saying "maybe problem with the internal". Hope there's a solution for this. Thank you.

    When do you get the error message?
    Nokia C7

  • Need help with "Nokia Software Updater"...Plz

    hi
    plz help me
    every time i try to install
    and it gave me this MSG
    " Error 2738.Could not access VBScript run time for custom action."
    my Lap work with W.vista
    and i have N95-8GB
    plz i need a help to update my phone

    Please do a search on this forum for "6280 software update" and you will have your answer.
    Many people have written here about Nokia software updater that tries to flash their 6280 phones with V6.10 (intended for the 6288) and then breaks their phones.
    I myself was busy downloading the firmware for a friends 6280 that was just minutes away from being flashed with 6.10 when I came across messages on many sites telling about the issue with the software updater and 6280 phones. I managed to save that 6280 from sure doom.
    If you also searched before hand you would not have this trouble.
    You need to take the phone to a nokia Service centre to have it flashed now and get it into a working state.

  • Problem Downloading Nokia Software Updater

    Hi. This is my first time using this board so bare with me. Everytime I try and download the program 'Nokia Software Updater' for my N80 I constantly get the error message that I require 256MB free space and then the installation shuts down completely. Currently my system has 51GB free space on the drive and obviously has plenty of room. Anyone else ever suffer the same problem when downloading or know how to solve the problem? Any help would be much appreciated. Thanks.

    I think it is referring to RAM. If you only have 256RAM and you have a graphic card that takes 64 then you don't have enough and need to use a computer with more RAM.
    Is that an N95 in your pocket or are you just pleased to see me?!?
    Life's too important to take seriously.
    Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
    I'm a 26 year old boy BTW

  • Trouble with Nokia Software updater software

    Hi
    I have trouble with my Nokia software updater.
    It "freezes" in detecting your phone picture.
    Everytime there is a new version of NSU and first time I run it after installing/upgrading it works fine. But when I run it one more time it freezes.
    Anybody who could help me???
    I have a Nokia N80
    Regards
    Ståle

    tried reinstalling the software?
    what is ur pc spec? does it meet the minimum requirements
    Blackberry Bold

  • N93 updates available with Nokia Software Updater

    Latest news for all N93 owners:
    Dear Updaters
    We are pleased to inform you that software updates are once again available for the Nokia N93.
    Following extensive product trials and the subsequent release of a new version of the Nokia Software Updater (1.3.0), we are able to reintroduce the N93 into the growing portfolio of supported products.
    Please ensure you always use the latest version of the Nokia Software Updater. You can download it from several Nokia websites, for example from
    http://www.europe.nokia.com/softwareupdate
    We are very sorry for any inconvenience caused while the N93 service was unavailable, and thank you for your patience.
    Kind regards
    The Nokia Software Updater team
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

    just finnished now, seems ok now! may just be me but camera and everything seems to work , hope it's the same for everyone else.
    Well done nokia!
    p.s. so would recommend everyone with the 20.0.058 version, to use the software updater and choose the "re-install" option!Message Edited by llaadd on 06-Feb-2007
    11:37 AM
    LLAADD

  • I have a problem with a software update!

    I recently got a new macbook pro and I was doing a software update last night as it was required but then when it started to do the update the computer installed the software and then a barring noise came from the mac and it tried to restart 4 times before it eventually came back on. The software trying to install was Fireware 800 I think. Can anyone help with this?

    Hi all,
    Make sure to remove the current software by going to Start > All Programs > HP > HP Photosmart B210 > Uninstall..
    Then go to Programs and Features and remove any remain item of the printer, any item should beging with HP, as well you may see the Read Iris software..
    After uninstalling the software reboot your PC, download and install the updated software version below:
    http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-2/PSB210_1315.exe
    I believe the problem should be resolved,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Having problem with Auto Software Updates

    Hi there,
    I having trouble with updating all software updates on my iMac. Some of updates being downloaded but they are not installing.
    after downloading it, something stopping installation... and this is happing with each and every update.
    please Help.
    -Sonu

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • ITunes Library wiped out after software update - Pls help !

    I set my iMac periodically runs auto software update, and after I run iTunes 6.0.5 (20) software update, I opened iTunes and a warning message says, "Files moved to iTunes Library Damaged 1", and the library is empty !!
    On further search, when I go into HD, a folder "iTunes Library" seem to have those previous songs. Looking thru the files, it seems as though they are all the songs I lost. Can I load these songs back to the iTunes Library, which is empty right now? Or are these damaged files?
    FYI - I previously had iLife'05, but thru periodic software updates, iTunes is now version 6.0.5 (20). Is this compatible with the specs of my mac?
    Kind of mad, b/c I literally just purchased songs and did not back them up....
    Any help or advice is welcome.
    Thanks!

    The first tip is to turn off the auto update features. The Mac OS will still go look but will ask you if you wnat to install. It is usually a good idea to wait a week or so after an update see what problems others are having.
    You tunes files are ok - it is the "iTunes Library" and the "iTunes Music ....xml" that are damaged. These are data base files that work with iTunes and other programs so they know where to go look if a program needs to use something in iTunes.
    When you open iTunes the 2 noted files above will be located in HD>User>Music>iTunes. you can just "add" the tunes back into the library and it should be ok. Note that you will lose your old info such as "date added" etc.
    You can go to the Apple Store online and select the Apple Software option to see the system requirements for iLife06.
    MJ

Maybe you are looking for