Problem with non cumulative KF

Hi All,
I have some problem in the calculation of non cumulative KF. The fields it uses for inflow and outflw as same value in SAP system but the nom *** KF is showing a different value For eg. it uses receipt total stock as inflow and quantity total stock as outflow. The value for receipt total stock is 3309000 and that of quantity total stock is 3588850. But the non *** KF is being shown in report as 8483410. Can anyone pls explain troubleshoot. Please provide me quick responses.
Thanks in advance,
Sananda

Dear Dirk,
Thanks for response.
Describe please what do you mean as "use cumulative instead of non-cumulative"?
My cube is material stock by storage location, stocks by storages define as non-*** KF on in- and out-comes. I need in BEx real quantity and value stocks independently of the query navigation detailed level.
Are there ready-made apropriate BEx implementaions from SAP for my case?
About virtual KF - I've nevere before didn't use virtual KF. From what I'll must to start? Where I can search appropriate knowledge?
Kind regards,
Igor Podgibalov,
Saint-Peterspburg, Russia

Similar Messages

Problems with Non-cumulative Cube

Dear All,
I have a cube with non-cumulative key figures. An DSO supply data for that cube.
The query on that cube will gets wrong results sometimes. But after removing all the data from that cube and uploading again from the DSO, the query presents the right result.
Is there anybody knows why and how to fix it?
Thanks.
Bolun

Hi
Non-cumulative Cubes to be defined correctly with Inflow and Outflow because it depends on Which option you choose depends on how you want to evaluate the non-cumulative key figure, and also the Marker Update you are dealing with.
The key figures for non-cumulative value change or for inflows and outflows are normal cumulative key figures that have u2018summationu2019 both as aggregation and exception aggregation. Generally, Non-cumulative key figures always have summation as standard aggregation.
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Hope it helps and clear

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Bad performance with non-cumulative key figures

Hi All,
I have a cube with 8 non cumulative key figures based on fiscper.
I am not sure how the performance for reporting with non-cumulatives can be improved.
Thanks
Karen

Performance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
For actual stock, the more you compress the better it is.
Regards,
Fred

Problems with non-ASCII characters on Linux Unit Test Import

I found a problem with non-ASCII characters in the Unit Test Import for Linux. This problem does not appear in the Unit Test Import for Windows.
I have attached a Unit Test export called PROC1.XML It tests a procedure that is included in another attachment called PROC1.txt. The unit test includes 2 implementations. Both implementations pass non-ASCII characters to the procedure and return them unchanged.
In Linux, the unit test import will change the non-ASCII characters in the XML file to xFFFD. If I copy/paste the the non-ASCII characters into the Unit Test after the import, they will be stored and executed correctly.
Amazon Ubuntu 3.13.0-45-generic / lubuntu-core
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.7.0_76-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.76-b04, mixed mode)
In Windows, the unit test will import the non-ASCII characters unchanged from the XML file.
Windows 7 Home Premium, Service Pack 1
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
If SQL*Developer is coded the same between Windows and Linux, The JVM must be causing the problem.

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files?

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files? I know that is possible for email sent pics.

My bad, It was a Verizon problem. When they upgraded my phone they were supposed to remove all blocks on messaging . Found out they did not do this. All messaging now works. Thanks for listening.

InfoProvider with non-cumulative key figures

what does infoprovider with non-cumulative key figures...
noncumulative key figures..
looking for reply

it's property of the KF... nothing do with Cubes or ODS.
Name itself telling non-Cumulative KF. We can't cumulate this KF. Suppose take the Case Sales Amount and No of Employees. Sales Amount can be cumulated over Time. But No Employees can't be cumulated. Same is the Case with Stock as well.
Nagesh Ganisetti.

Archive Stock Cube with non-cumulative nature

Hi All,
I have been trying to archive the Inventory (Stock) Infocube as we have more than couple of hundread million records in the cube and it is taking long time to execute query.
I know how to acrive the regular cubes and DSOs, but I couldn't find any helpful documentation where I can know how to archive the Infocube with non-cumulative nature or containing Marker update.
Can anyone pleaes post the link of document?
BTW, we are using BI7.0 SP15
Thanks,
Dhaval

Hi,
There are two ways of archiving data from a non-cumulative InfoCube - time slot archiving and archiving with selection characteristics.
Time slot archiving (recommended)
As an archiving method, you must choose for a non-cumulative InfoCube, time slot archiving for the time reference characteristic. When you recreate an archiving object for a non-cumulative InfoCube, this characteristic is also suggested by the system.
Only archive non-cumulative changes up to a specific point in the past. This reduces the volume of data in the InfoCube. The marker (= end non-cumulative) remains unchanged.
In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements Only option.
You are only able to archive the marker if you also archive all of the non-cumulative changes. Subsequently, the contents of the non-cumulative InfoCube are archived completely. In the variants maintenance screen, in the archive administration, under Non-Cumulatives, choose the Movements and End Non-cumulative option.
You must archive the non-cumulative changes (for all times) first, and then archive the marker in a separate archiving run, so that the non-cumulative changes and the marker are stored separately in the archive.
The advantage of time slot archiving is that archiving runs can be carried out periodically using a single variant with a relative time restriction. The alternative archiving method described below does not have this advantage.
Archiving with selection characteristics
In some cases, archiving based only on time slots does not have the required effect of reducing the volume of data in the InfoCube. This is the case, for example, if the non-cumulative bearing objects are subject to high fluctuations, meaning that data is constantly being loaded for new objects and old objects are made obsolete. With time slot archiving, the end non-cumulative remains for all objects until all of the data in the InfoCube is finally archived, even if all the non-cumulative changes for an object have been archived already.
In this case, you want to archive and delete completely any objects that are no longer active in the InfoCube. This means archiving the marker as well. For other objects that are still active, you only need to archive the non-cumulative changes from the past, which means the marker is retained.
When you define the archiving properties for a non-cumulative InfoCube, do not therefore choose the time slot archiving method. Instead, select individually the characteristics that are relevant to restricting archiving runs. The time reference characteristic should also be included in this selection whenever possible.
Using this archiving method, for each archiving run, you need to create selection conditions in a variant. In the variant for the archiving run, in addition to the selection conditions, you can also specify for the selected characteristics whether or not non-cumulative changes and marker data is archived. If you choose to archive marker data, be aware that the time selection contains the maximum value for time.
Please refer to the below link to archive the data for Stock Cube:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/c219fe9a46194aa66d55254fdab182/frameset.htm
Hope this helps.
Regards
Tanuj

Non cumulative with non-cumulative change

Hi Experts,
I have a Question !, As i know that i can create Non-Cumulative Figure By Means Of two ways:-
1. Non cumulative with non-cumulative change and
2. Non Cumulative with Inflow and Outflow.
the second one is very clear but i am not very clear about 1st option i.e What Non-Cumulative Value changes is? and how it calculates the non-cumulative Value.
If u have an Idea please share your knowledge...
Ragards
Prakash

The 1st option is for key figures like headcount or similar, which you would like to store as a total figure in a cube instead of a DSO in a scenario where you are using a multiprovider on this together with other non-cumulative cubes.
The SAP help below explains this quite well
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
Best,
Ralf

Non cumulative with non cumulative value change

hi,
can any one tell the concept of non cumulative with non cumulative value change with an example with numbers,i am bit confused .
like we have for non *** inflow and outflow- stocks inflow and outflow so non *** is based on inflow and inflow.
in the same way any example for above concept

Hi Venkat,
If I under stand your question correctly you wish to have an example of where non cumulative values are used and you have given the value of stock? If so here is an example with figures
So you would do an initial load loading the opening balances of Stock.
Say material number 12345 = 100 units
After that, only movements will be posted so Stock will either increase or decrease depending on what image is posted via the change log.
So there will be a purchase of material 12345 for 50 units so now the balance of material is 150.
But then you could use or sell 70 units of material 12345 so you stock value would be 80 units
I hope this makes sense and this is an example that you are after if not please let me know and I'm happy to help
Regards
Ben
PS assign points if useful

Error when activating Cube with Non-cumulative KF

Hi all,
I'm trying to re-activate an InfoCube but now with non-cumulative KF and I'm getting the error message "Object YYYYY could not be activated".
Please help!
Best regards,
Thiago Modro

hi,
have you included the neccessary time characteristics
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Ramesh

Problems with non-ascii keywords

I have some problems with non-ascii keywords that makes the whole keyword feature useless for me. I don't know if I'm doing something wrong or if there something I'm missing completely.
The problem is that when I enter something like "grön" iPhoto sometimes refuses me to type in "grön" on another photo and "eats" the "ö". And if I select the matching keyword from the popup list iPhoto has changed the originally "grön" to "gr¨ön" (if that comes out right on the web). Here are a few screenshots to show what happens
If someone knows what happens I would really appriciate some hints on how to avoid this.
Note that adding/editing keywords works just fine in Aperture.

There is a long standing issue with iPhoto and non-ascii characters. I know of no solution.
iPhoto menu -> Provide iPhoto Feedback and report it as a bug.
Regards
TD

Problem with non-container managed entity manager

i am working on a project, in which i am using entity beans.i use netbeans, glassfish as application server and toplink as persistence provider .
i created a java class that handles all the operations with the entitys, which means i using non-container managed entity manager.
in the constructor
try{
            EntityManagerFactory emf = Persistence.createEntityManagerFactory("voidPU");
            entityManager = emf.createEntityManager();
        catch(Exception ex){
            throw new EJBException(ex.getMessage());
        }then i call a function in this class from a servlet
the code of the function
List users = null;
        try {
            ProgLanguages progLanguage = entityManager.find(ProgLanguages.class, languageId);
            users = (List) progLanguage.getUserIdCollection();
        catch(IllegalStateException illegalStateException){
            throw new EJBException(illegalStateException.getMessage());
        catch(IllegalArgumentException illegalArgumentException) {
            throw new EJBException(illegalArgumentException.getMessage());
        }i got an IllegalArgumentException saying Unknown entity bean class: class vanguard.server.entity.ProgLanguages, please verify that this class has been marked with the @Entity annotation
what confuses me is that sometimes it works and most of the time it does not work, have i made anything wrong?, or there is a problem with any of the tools netbeans, glassfish, or toplink?

Is it always the same entity that is reported as 'unknown' ? You mention that it works sometimes but is it the same deployment and the same code that works? The first thing I would verify is that the ear is being created as expected by netbeans. Check the persistence.xml file and verify that all of the classes are listed that will be used as entities.
--Gordon

Problem with Non-English Fields Output to PDF by JASPER in JDev10.1.3

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

Problem with non cumulative KF

Similar Messages

Maybe you are looking for