Problem with non-database item

I have a 10g rel 2 form that has a post-query trigger that populates a non-database item. The non-database item has a when-validate-item trigger which I only want to fire when the user changes something in that field not at query time because it causes the form status to be changed. How can I either prevent this trigger from firing in query mode or test within the trigger that I'm in query mode so that the logic won't get executed?

Put this at the top of your when-validate trigger:
If :system.mode = 'QUERY' then
return;
End if;I have found that post-query activity often causes ALL when-validate triggers at the item and block level to run. So you may need those three lines in every when-validate trigger.

Similar Messages

Searching in non-database items

Hi,
I have a block of which the source is a table.
There are some non-database item in the block.
Actually these fields are from another table.
In the post-query, I populate the non-database items with the table.
My question is : normally I can use 'Enter Query' to seach the records in
the database column. How can I perform seaching with non-database items ?
Thanks
Ivan

In a pre-query trigger alter the where clause of the main block to query the main table based on non-database values...
Use the set_block_property procedure and the 'DEFAULT_WHERE' clause or the 'ONETIME_WHERE' property...
example...
set_block_property('MYBLOCK', ONETIME_WHERE,
'where main_table.id in (
select id from my_non_db_block_table where mycol = :my_non_db_field)');
To accept wild cards you will probably have to change the = to a "like" above..
You will have to build your where clause by adding a "and" condition for each non-db field.
Message was edited by:
Mark Reichman

Populate non database items with lov

Hi,
Let's say that I have one database block with 2 columns ID and NAME.
Only ID it is a not displayed database column, and NAME it is a displayed text item with an lov which retrieve data for both columns.
How can I do, to populate the non database item NAME after querying the block, without using POST-QUERY trigger and select into statement.
Thanks.

Hi Gabriel
How can I do, to populate the non database item NAME after querying the block, without using POST-QUERY trigger and select into statement.u can't do that but with using POST-QUERY trigger and select into statement.
This Trigger fires the action of populating the non-db item block Level after executing query...
Regards,
Amatu Allah

About populating a non-database item in a multi-records block

Hi, all
I have a problem about populating a non-database item in a
multi-records block. This block is set to database block with a
controlled item which needs to be populated after query. so I
create a post-query trigger, but my problem is when the records
listed in this block are less than 10 ( the record number is set
to 10), the trigger fires no problem. but when the retrieved
records are greater than 10, the error message is 'post query
trigger raised unhandled exception ora 01403'. anyone can help me
fix this problem?
Thanks in advance
Diana

Diana,
When you have an unbound item in a block and want to fetch
some data into it you need to write a post-query trigger.What
you have done is right.But it seems that u are getting a No data
found error.I am sure about how u r populating data into that
field.If u have written a select statement to fetch the data in
post-query trigger, kindly handle an exception and find out the
problem.Having a look at ur code(pos-query) would be much more
helpful for giving a better solution.Try this a let me know.
Thanks
Vinod.

How to query on non database item?

I am working on AP Invoice form. The Invoice Header block based on table ap_invoices_all, I have database items such as invoice_num, invoice_date, and invoice_amount. I also have some non databases item like supplier and supplier number. I added POST_QUERY:
declare
supplier varchar2(240);
supplier_number varchar2(30);
supplier_site varchar2(15);
begin
select aps.vendor_name, aps.segment1
into :invoice_header.supplier, :invoice_header.supplier_number
from ap_suppliers aps
where aps.vendor_id = :invoice_header.vendor_id;
Also in PRE-QUERY
declare
supplier varchar2(240);
supplier_number varchar2(30);
supplier_site varchar2(15);
invoice_num varchar2(50);
invoice_date date;
invoice_amount number;
begin
select aia.invoice_num, aia.invoice_date, aia.invoice_amount
into :invoice_header.invoice_num, :invoice_header.invoice_date, :invoice_header.invoice_amount
from ap_invoices_all aia
where aia.vendor_id = (select vendor_id from ap_suppliers where vendor_name = :invoice_header.supplier);
It's showing fine with Suppier iformation I query by invoices, but I doesn't work when I query by supplier.
Can anyone help? I really appreciate.

Hello,
Thanks for your reply. I think I need to clarify my problem
Your cursor has the same result as what I have in the post-query:
Select aps.vendor_name, aps.segment1
into :invoice_header.supplier, :invoice_header.supplier_number
from ap_suppliers aps
where aps.vendor_id = :invoice_header.vendor_id;
and they both work when I query on a database item, such as invoice_num and the non database item vendor name and vendor number will show up. I am doing ok with this.
My problem is when I query on vendor name field which is not a database item, such as CLARK PUBLIC UTILITIES, it will not return CLARK PUBLIC UTILITIES only, instead it returned all the suppliers. Could you please help with this? Thanks a lot.

How to include non database item in the query

Hi
I have a Master-Detail form. where in the detail block one of the field is text item 'X' attached the list of values(Y). Master block includes non database items which is based in the decoding result of the database items for example:
Gender(Male, Female)>> non database item
Gender_id(M,F)>>database item
the form is created based on the template.fmb form for apps. When I run the form in the query mode, i can query about any database item while including query about others non database item does not affect.
how to can i modify it so this could be handled??
I know that one way to avoid this issue is to create a view with all my desired field.
but there should be away to override the build in query used by oracle apps...
any one has a link, source, document... etc that help on this??
any idea how to do it without creating a view??
thnx alot

Hi HST,
You can code the handling in POST-Query of the corresponding block to retrive the corresponding data depending on the Queried data.
Regards,
Kiran

Function not returning database rows properly in non-database item

Hi,
I have 3 database items that I'd like to concatenate into one field and display it in a non-database item. I have setup two different methods to do this for testing purposes. First, I created three separate database items (SECTION, ROW, & SEAT_NUM) and a non-database item (SEAT). I created a formula (in SEAT) to do the concatenation and this way works fine. For my second method, I created a function where I selected the 3 fields and performed a concatenation into a single value to be returned in a seperate non-database item (SEAT_TEST).
Here's my function:
FUNCTION SeatLocation(p_id IN event.id%TYPE)
RETURN VARCHAR2 IS
CURSOR a IS
(SELECT ltrim(rtrim(event.section,' '),' ')||' '||
ltrim(rtrim(event.row,' '),' ')||' '||
ltrim(rtrim(event.seat_num,' '),' ') seat
FROM event
WHERE event.id = p_id);
BEGIN
FOR rec IN a LOOP
IF rec.seat IS NOT NULL THEN
RETURN rec.seat;
ELSE
RETURN ' ';
END IF;
END LOOP;
END SeatLocation;
And I'm calling it in a POST_QUERY trigger with the following: :event.seat_test := SeatLocation(:event.id);
I put both non-database items side-by-side, run the form, and the first method works fine. I doesn't quite work for the function to display in SEAT_TEST. For my program, an ID can have multiple seat locations and I'd like to display all those seats as I scroll through the form (for a given ID). What the function is returning is only the first records seat location even though there are two more locations (from the remaining two records) that need to be displayed, but are not. It works fine for the formula method. Is there a work around this within my function code and/or the SEAT_TEST item? I'd like to keep my function instead because I could use the code elsewhere. I thought that since there is more than one record retrieved for a particular ID, the for loop would return one value each loop iteration and display the different value seat locations as I scroll/arrow down through the form. I didn't know if you had to call the POST-QUERY trigger multiple times for the number or records you retrieve in the cursor. I hope this makes sense.
Any advice would be greatly appreciated.
Thank you,
Eric

Even though your function is written to loop through multiple records, as soon as it hits the first one inside the FOR loop, it returns that value. The Return command is an exit, so the function is done, and you cannot expect it to magically run a second time just because the cursor found more than one row.
You need to pass the function all the parameters to form a unique key into the row you are looking up. ID is not unique.

Querying a record from a non-database item

I am working in Apex 4.0. I have a page based on a table with the following columns: dktnr, borrower, amount, previous_dktnr, subsequent_dktnr. The precious_dktnr is the dktnr under which the loan was financed in the past, before its assumption or refiancing. The subsequent_dktnr is the dktnr under which the loan is later identified. When a loan is refinanced, it is assigned a new dktnr in a new record, and the old dktnr is placed in the previous_dktnr column of that new record, and the current dktnr is placed in the subsequent_dktnr column of the old dktnr record.
I created two buttons, one for the previous_dktnr and one of the subsequent_dktnr. When I click either of these buttons, the action redirects to the current page and places the value of either the previous or subsequent dktnr into the dktnr item. This queries the record for the dktnr that has the same value as the previous or subsequent dktnr.
This works. It allows the user to shuffle back and forth between the two dktnr's.
One would assume then that, if a non-database item were created, say :P22_QUERY_DKTNR, you would be able to enter an existing dktnr into that item and have a button, using the same logic as the previous and subsequent dktnr buttons, that would be able to return the record for the dktnr entered.
I have tried this, and it does not work. Can anyone tell me why it does not work?
Edited by: Doug on Apr 9, 2011 3:42 PM
Edited by: Doug on Apr 9, 2011 3:43 PM
Edited by: Doug on Apr 9, 2011 3:43 PM
Edited by: Doug on Apr 9, 2011 3:45 PM
Edited by: Doug on Apr 9, 2011 3:46 PM

Doug,
Made copies of your two page within your workspace, page 3 & 4.
The issue was the page did not have a value in session containing your Look_Up value. I altered the Look-Up button to Submit the Page so as to capture the Look_Up value and then added a new Page Branch that was sequenced prior to your existing branch. This new branch sets your P4_DKTNR with the Look_Up value and then returns your results.
Jeff

Sort a non database item

I have one datablock (ma_erz) in my forms based on the table test1.
Datase-Items of table test1:
:ma_erz.MAE_ID,
:ma_erz.MAE_SYSART
Non-Database-Items:
:ma_erz.L_KM_USERNAME
My problem is, that I could not sort the records of a non-database-item.
Does anybody know a workaround? I would like to sort the records to username.
I am saving the username in :MA_ERZ.L_KM_USERNAME in Post-Query
of datablock ma_erz:
/* CGFK$QRY_LOOKUP_DATA */
/* Query lookup data for the foreign key(s) */
BEGIN
IF (
        (name_in('MA_ERZ.MAE_SYSART') IS NOT NULL)
THEN
    BEGIN
      CGFK$QRY_MA_ERZ_MA_ERZ_SYS_ERZ(
        :MA_ERZ.L_ERZSYS_ERZ_BEZEICHNUNG,    /* OUT: Value in item :MA_ERZ.L_ERZSYS_ERZ_BEZEICHNUNG */
        :MA_ERZ.MAE_SYSART);                 /* IN : Value in item :MA_ERZ.MAE_SYSART */
    EXCEPTION
      WHEN NO_DATA_FOUND THEN
        MESSAGE('Fehler : Sys Art does not exist');
      WHEN OTHERS THEN
        CGTE$OTHER_EXCEPTIONS;
    END;
    SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD, 'MA_ERZ', STATUS , QUERY_STATUS);
END IF;
IF (
        (name_in('MA_ERZ.MAE_ID') IS NOT NULL)
THEN
    BEGIN
      CGFK$QRY_MA_ERZ_MA_ERZ_SYS_KM_(
        :MA_ERZ.L_KM_VORNAME,    /* OUT: Value in item :MA_ERZ.L_KM_VORNAME */
        :MA_ERZ.L_KM_NAME,       /* OUT: Value in item :MA_ERZ.L_KM_NAME */
        :MA_ERZ.L_KM_USERNAME,   /* OUT: Value in item :MA_ERZ.L_KM_USERNAME */
        :MA_ERZ.MAE_ID);         /* IN : Value in item :MA_ERZ.MAE_ID */
    EXCEPTION
      WHEN NO_DATA_FOUND THEN
        MESSAGE('Error : does not exist');
      WHEN OTHERS THEN
        CGTE$OTHER_EXCEPTIONS;
    END;
    SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD, 'MA_ERZ', STATUS , QUERY_STATUS);
END IF;
END;
/* CGFK$RESET_BLOCK_WHERE_CLAUSE */
BEGIN
IF (CG$PROTOTYP_MA_ERZ_V01_GLOBALS.MA_ERZ_WHERE <> 'first_time') OR
    CG$PROTOTYP_MA_ERZ_V01_GLOBALS.MA_ERZ_WHERE IS NULL THEN
    set_block_property('MA_ERZ', DEFAULT_WHERE, CG$PROTOTYP_MA_ERZ_V01_GLOBALS.MA_ERZ_WHERE);
    CG$PROTOTYP_MA_ERZ_V01_GLOBALS.MA_ERZ_WHERE := 'first_time';
END IF;
END;

Or, even simpler, put the following in your order by:
ORDER BY (SELECT THELOOKUPCOLUMN
            FROM THELOOKUPTABLE X
           WHERE X.MAE_ID=Y.MAE_ID)Additionally, set the ALIAS of the block to Y
p.s. you could even skip the "ORDER BY" itself.

When-validate-record trigger only if a non database item is changed

Hi,
I am trying a code in the when-vaidate-record trigger in the BLOCK level.
The trigger should fire only if a checkbox item value is ticked(Value ='Y) for the present record(i.e, if already existing other records have a value ticked (='Y), it doesnt matter and trigger shouldnt fire)
Please help me achieve this :
The code I have tried in when-vaidate-trigger, which does not work as what I want :
DECLARE
X NUMBER;
BEGIN
if
nvl ( :DEFLOC.to_be_defaulted, 'N' ) = 'Y' and :DEFLOC.COMMENTS is NULL
and :SYSTEM.RECORD_STATUS ='CHANGED'
     then
    set_alert_property(
         'err_alert',
         alert_message_text,
         'You must enter a comment when defaulting localities.');
          x := show_alert('err_alert');
          RAISE FORM_TRIGGER_FAILURE;
          end if;
END;The above code does not fire at all..
If I remove the part,
and :SYSTEM.RECORD_STATUS ='CHANGED'
it fires for "all records"(not just the currently changed records) where nvl ( :DEFLOC.to_be_defaulted, 'N' ) = 'Y' and :DEFLOC.COMMENTS is NULL
Please help !!
Note: :DEFLOC.to_be_defaulted is a non database item ; :DEFLOC.COMMENTS is a database item

Hi kriti,
There is one more way,
In the when-checkbox-changed trigger,
if :your_chk_box = 'Y' then
set_Record_property(:system.cursor_Record, 'your_blk',status,changed_Status);
else
set_Record_property(:system.cursor_Record, 'your_blk',status,Query_Status);
end if;
Then it is easy for you to find out the changed records using get_Record_property((:system.cursor_Record, 'your_blk',status)
Hey let me ask you one Question, is that check_box item is database item ???
If so,
it is easier..the fol. code will work for that
if   nvl ( :DEFLOC.to_be_defaulted, 'N' ) = 'Y' and :DEFLOC.COMMENTS is NULL
and nvl(get_item_property('DEFLOC.to_be_defaulted',database_value),'N') = 'N'      then
                  set_alert_property(
         'err_alert',
         alert_message_text,
         'You must enter a comment when defaulting localities.');
          x := show_alert('err_alert');
          RAISE FORM_TRIGGER_FAILURE;
          end if;otherwise
If your are creating that temp. item, it should be in the same block as non-db item.
I will explain this... You are setting the status of to_be_defaulted check box of some queried record to Y based on some conditions, right?
These records anyways are not updateable. Now your requirement is to find out the newly checked check boxes.
So in the post query or the place where you set to_be_defaulted as 'Y, we will default the new item with value Y, so that in the when validate trigger, you
know which record needs to attacked, It is those records with nvl( new item ,'N') = 'N' and to_be_defaulted = 'Y'...
Regards
Dora...

Non-Database items in enter-query mode

I have a form with 2 base table blocks, typical master details situation. I wish to allow a field from the detail block to be queryable from the master block. I was considering adding a non-database item to the master block (visible only when in Enter-Query mode). In a pre-query trigger I would amend the DEFAULT-WHERE property of the master block when the appropriate where clause using the non-database item value. My prototype/test version works fine except the non-database item is not enabled while the master block is in enter-query mode.
I think basically forms will enable only field s if they are database items and queryable set to yes. There are no more database items I can use to set the non-database item column name property.
Any suggestions would be appreciated.
Ralph
Oracle Developer - Unisys Australia

Hi Ralph,
we have several Forms using non-database items as query-items which works fine.
What we did is following:
1) create non-database item xy in master-data-block
2) set property database item to no
3) set property query allowed to yes
4) create a pre-query trigger on master-data-block where we change the where-clause (this is forms6i, in 9i we would use the one-time-where-clause)
Peter

Problems with Sybase Database for Collection Manager in SCE2020

We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
[root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem           1K-blocks      Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00                      149559596 138280700   3681636 98% / /dev/sda1               101086     20685     75182 22% /boot none                   1036624         0   1036624   0% /dev/shm
We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
Here is the info:
Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
[root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
[root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
Name                    % Data Free % Log Free
Database                        55      99
[root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
/home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
/home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
[root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
Test: 01db_up.sh. Status: FAIL. Message: DB is not running
Test: 02cm_up.sh. Status: PASS. Message: CM is running
Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
Message was edited by: EMILIO MENCIA

Tomo:
we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
This is the log of the CM. What can be the problem? Thanks tomo
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts during current sample period: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts since startup: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections during current sample period: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections since startup: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections during current sample period: 15.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections since startup: 18.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used during current sample period: 1.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used since startup: 3.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server Error: 1608, Severity: 18, State: 4
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server Error: 1608, Severity: 18, State: 4
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Error: 632, Severity: 20, State: 2
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Attempt to move memory with an incorrect length
of -794444483. Maximum allowed length is 16384.
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel SQL causing error : =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curdb = 4 tempdb = 2 pstat = 0x10000
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel lasterror = 632 preverror = 0 transtate = 3
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curcmd = 0 program =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel end of stack trace, spid 11, kpid 1755578479, suid 3
AFTER RESTART
ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Adaptive Server Enterprise (Small Business Edition)
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel Using config area from primary master device.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel Locking shared memory into physical memory.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel Internal run-time model set for Linux - Native
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using 1024 file descriptors.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Copyright 1987, 2007
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. All rights reserved.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Unpublished rights reserved under U.S. copyright laws.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel
Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel This software contains confidential and trade secret information of Sybase,
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Inc.   Use, duplication or disclosure of the software and documentation by
Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel the U.S. Government is subject to restrictions set forth in a license
Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement between the Government and Sybase, Inc. or other written
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement specifying the Government's rights to use the software and any
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel applicable FAR provisions, for example, FAR 52.227-19.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Platform TCP network is forced to IPv4-only.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel ASE booted with TCP_NODELAY enabled.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel SSL Plus v5.0.4 security modules loaded successfully.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel Network and device connection limit is 1009.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Number of blocks left for proc headers: 12760.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Proc header memory allocated 2552 pages for each per engine cache
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Size of the 16K memory pool: 307200 Kb
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Memory allocated for the default data cache cachelet 1: 307200 Kb
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Virtual device 0 started using asynchronous i/o.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server Loaded default Unilib conversion handle.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel Worker Thread Manager is not enabled for use in ASE.
Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Unix interval timer enabled for sysclk interrupts.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel Begin processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Completed processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Encryption provider initialization succeeded on engine 0.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel engine 0, os pid 27618 online
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server No active traceflags
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel libomni1 - Component Integration Services: usin
g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server Opening Master Database ...
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server Loading ASE's default sort order and character set
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server Recovering database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server Started estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started REDO pass for database 'master'. The total number of log records to process is 13.
Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Completed REDO pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Recovery of database 'master' will undo incomplete nested top actions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Started recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server Completed recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server Started filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server Completed filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Started cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Completed cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server Checking external objects.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server Database 'master' is now online.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server The transaction log in the database 'master' will use I/O size of 16 Kb.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server Warning: ASE_HA has no valid license and therefore is not initialized.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server server name is 'pqbsyb1'
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server Activating disk 'sysprocsdev' of size 126976 KB.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Virtual device 1 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server Activating disk 'systemdbdev' of size 49152 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Virtual device 2 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server Activating disk 'apricot_data1' of size 35082660 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server Activating disk 'apricot_log1' of size 2980002 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server Activating disk 'tempdb_dev' of size 1048576 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Virtual device 5 started using asynchronous i/o.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server Recovering database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server Started estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Completed REDO pass for database 'sybsystemdb'.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Started recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server Completed recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server Started filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server Completed filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Started cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Completed cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Boot Count: 13
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server Checking external objects.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server Completed recovery checkpoint for database 'model'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server Started filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server Completed filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Started cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Completed cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server Checking external objects.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server The transaction log in the database 'model' will use I/O size of 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Database 'model' is now online.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server The logical pagesize of the server is 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server 0 dump conditions detected at boot time
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Clearing temp db
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server Database 'tempdb' is now online.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server Recovering database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server Started estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed REDO pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server Completed recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server Started filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server Completed filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Started cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Completed cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server Checking external objects.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server Database 'sybsystemprocs' is now online.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server The server will recover databases serially.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server Recovering database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server Started estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started REDO pass for database 'apricot'. The total number of log records to process is 846.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Redo pass of recovery has processed 2 committed and 138 aborted transactions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Completed REDO pass for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Recovery of database 'apricot' will undo incomplete nested top actions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Started recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server Completed recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server Started filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server Completed filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Started cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Completed cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server Checking external objects.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server The transaction log in the database 'apricot' will use I/O size of 16 Kb.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server Database 'apricot' is now online.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server Recovery complete.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default unicode sort order is 'binary'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default sort order is:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'bin_iso_1' (ID = 50)
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server on top of default character set:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'iso_1' (ID = 1).
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel Cannot send, host process disconnected: btl-sce-cm suid: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server Error: 1608, Severity: 18, State: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0)

Execute query with non database block

How to execute query with non database block when new form instance trigger.

Hi Kame,
Execute_Query not work with non database block. To do this Make a cursor and then assign values to non database block's items programmatically, see following example,
DECLARE
BEGIN
     FOR i IN (SELECT col1, col2 FROM Table) LOOP
            :block.item1 := i.col1;
            :block.item2 := i.col2;
            NEXT_RECORD;
     END LOOP;
END;
Please mark if it help you or correct
Regards,
Danish

Check box as a non database item

Hi.,
I am using jdev 11.1.5
My scenario:
I need to use checkbox in my af:table which is a non database item
if i check that check box i need to select the current row in that table
ex:
yr        period     type
2010    2            AJ    [checkbox]
2010    3            AJ    [checkbox]If I check the 2nd period check box then the value of
Row row= vo.getcrrent();
row.getAttribute("period"); //   this value must be 2
check box must be a non-database item
how can i do this

is this what you want?
Row row= vo.getcrrent();
row.getAttribute("period"); //   this value must be 2
int index =vo.getRangeIndexOf(row); //Get the index of the given row relative to the beginning of the range. http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e10653/oracle/jbo/RowIterator.html#getRangeIndexOf%28oracle.jbo.Row%29

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Problem with non-database item

Similar Messages

Maybe you are looking for