Problem with non lighting keyboard MB Air

Hi... I have a MB Air 11,model A1370,late 2010. His keyboard is NOT lighting. Can i replace with other lighting keyboard and from which model ?

It is not possible. Or I should rather say it is completely impractical.
Your model does not have the requisite electrical connections present on the main board to support the lighted keyboard. As well, the hardware contains no profile to make the OS aware and able to control it.
The least expensive solution is to sell your device, and buy one equipped as you desire.

Similar Messages

Problem with the light with bootcamp/windows 7 (64 bits)

Hello there,
After the last windows or bootcamp update, i got a problem with the light of my windows.
I can't adjust it with all methods (windows power or F1/F2).
I don't know how to solved it.
Thanks for your help.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Problems with non-ASCII characters on Linux Unit Test Import

I found a problem with non-ASCII characters in the Unit Test Import for Linux. This problem does not appear in the Unit Test Import for Windows.
I have attached a Unit Test export called PROC1.XML It tests a procedure that is included in another attachment called PROC1.txt. The unit test includes 2 implementations. Both implementations pass non-ASCII characters to the procedure and return them unchanged.
In Linux, the unit test import will change the non-ASCII characters in the XML file to xFFFD. If I copy/paste the the non-ASCII characters into the Unit Test after the import, they will be stored and executed correctly.
Amazon Ubuntu 3.13.0-45-generic / lubuntu-core
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.7.0_76-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.76-b04, mixed mode)
In Windows, the unit test will import the non-ASCII characters unchanged from the XML file.
Windows 7 Home Premium, Service Pack 1
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
If SQL*Developer is coded the same between Windows and Linux, The JVM must be causing the problem.

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files?

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files? I know that is possible for email sent pics.

My bad, It was a Verizon problem. When they upgraded my phone they were supposed to remove all blocks on messaging . Found out they did not do this. All messaging now works. Thanks for listening.

Problems with non-ascii keywords

I have some problems with non-ascii keywords that makes the whole keyword feature useless for me. I don't know if I'm doing something wrong or if there something I'm missing completely.
The problem is that when I enter something like "grön" iPhoto sometimes refuses me to type in "grön" on another photo and "eats" the "ö". And if I select the matching keyword from the popup list iPhoto has changed the originally "grön" to "gr¨ön" (if that comes out right on the web). Here are a few screenshots to show what happens
If someone knows what happens I would really appriciate some hints on how to avoid this.
Note that adding/editing keywords works just fine in Aperture.

There is a long standing issue with iPhoto and non-ascii characters. I know of no solution.
iPhoto menu -> Provide iPhoto Feedback and report it as a bug.
Regards
TD

Problem with iOS 8 in ipad air since update, "blue screen with restart"

Problem with iOS 8 in ipad air since update, "blue screen with restart"

I have exactly the same problem, i´m tired of looking for a solution but even here there is no answer... i don't know what else do. the blue screen and restart is more annoying every time i use it.

TS3048 I am having a problem with my wireless keyboard on my iMac

I am having a problem with my wireless keyboard on my iMac. Sometimes the keys seem to have a life of their own and I get a string of the same letter or symbol even though I only pressed the key once. Does anyone know how to rectify this?

Hello:
Try resetting the PRAM and SMC.
If that does not help, the KB is probably failing.
Barry

Problems with Spot Light after upgrading to 10.9

After upgrading to OS 10.9, I find problems with Spot Light. Folders no longer appear in the search results, also some files too.

Try re-indexing Spotlight.
Spotlight – Re-index
Some alternatives.
EasyFind – Spotlight Replacement
Find Any File
Quicksilver

Problem with Battery and Keyboard Light

First off, sorry if this is in the wrong section. This is my first time on these forums.
Just today I was skyping my girlfriend on my Macbook Pro (that I got in the summer or 2010). I have SmcFanControl installed and I regularly use it to monitor/increase my fan speed. As I regularly skype and play WoW on this computer, my computer temp often sits around 160-170 degrees F.
Today it was at around 170 and I had it on my lap. I sat up and jostled the computer a little and it shut off. The power cord light, which was green, immediately turned off. I tried unplugging it and plugging it back in and it stayed off. The computer wouldnt restart for about 30 seconds. Finally after hitting the power button several times it turned on.
It worked fine for 10 or so minutes. I assumed I just moved it too suddenly, although I have never had a problem with that before. Then, I moved again and it shut off AGAIN. It took another 30 seconds to register the power cord and to turn on.
This time, when it booted up, it said my clock was set to a date before 2008, althought it was still at Feb 16, 2011. Also, as soon as I turned it on, the fans were going full speed (as loud as when i have SmcFanControl set at 6200 rpm). I opened SmcFancontrol and it says my computer's temp is at 32 Degrees F and 000 rpm, which I know is not correct. I can't change the speed of the fans and the temp of the computer hasnt changed at all.
Also, my battery icon has an X through it and says "No batteries available" "Power Source: Power Adapter." The green light is very dim on the charger.
AND on top of this, my keyboard lights no longer turn on, even pushing F5 and F6. I am in a dim room so they should auto turn on.
I am afraid that I may have overheated the computer, but I was wondering if anyone has any advice. I was thinking of opening the back up but I dont have a small enough screwdriver at the momment. I also tried doing the "top -u -s3" command to check cpu% and my highest one is Firefox around 10-15%.
Any help would be appreciated. I'm thinking this is gonna require a look at the Apple Store, however I am an out of state college student and I'm not returning home for another week and I need my computer for assignments.
Sorry for the wall of text. Thanks in advance.
P.S. My computer is up to date.

SMC reset works best with anything that relies on power for the machine. When it comes to batteries SMC reset and PRAM usually do the trick. Also a lot of people miss this, do not plug on the top plugs use the lower plug.
As for the temperature on the lap, expect a lot of heat, the computers are designed to lay on flat SOLID surfaces. The underbelly on aluminum chassis laptops act as a heatsink. In addition the rubber feet keep the product high enough so air can pass through and help cool the system.
As far as the adapter you can have AppleCare send you without waiting a week for it. If it is an obvious hardware problem they may do an exception for you if you are out of phone support. Highly recommend APP for the phone support. You would have a battery on it's way to your current location in a couple days!

Problem with non modal ADM dialog

I have problem with focus and mouse and keyboard event passing to non modal dialog if some modal window was opened and closed on Windows platform.
I have this problem in my plugin, but also I did some tests with SDK WordFinder Plugin.There are 2 dialogs open there : CountDialog-non modal dialog and PromtDialog-modal one. I commented all lines in function DeleteCountDialog to leave this dialog on the screen. So, first, when "create page map" menu is selected, CountDialog is appearing and stays on the screen. At this stage, it can be moved and get focus when is clicked.After that, I click on "find word by word offset" and then PromtDialog is appearing. when I close Promtdialog by clicking on OK or Cancel, CountDialog is "freezing" - means, it can not be moved and does not get focus when I click on it.
Is it known problem ? Is there is some workaround there ?
thanks in advance,
Lidia.

Thanks a lot for your response.
I did changes as you recommended, but still have the same result.
So I have WordFinder from Acrobat SDK 8 with only one file changed:WordFinderDlg.cpp - see below.The result is the same:
1. I open Acrobat->Open some file
2. Click on "Advanced->Acrobat SDK->Word Finder->create Page Map" menu
3. "count" non Modal Dialog is opened and working and then stays on the screen and can be moved without problem.
4. Now I click on "Advanced->Acrobat SDK->Word Finder->find Word By Offset" - Modal Promt Dialog is opened. click some number and then click ok - choosen word is selected in Acrobat. From this moment, first "Count" dialog is frosen - can be selected, can not be moved.
The only workaround I see here is to create non Modal dialog every time I close Modal one.
Could you please advice ? May I please send to you project in zip ?
I really need it ASAP ?
thanks in advance,
Lidia.
ADOBE SYSTEMS INCORPORATED
Copyright (C) 1994-2006 Adobe Systems Incorporated
All rights reserved.
NOTICE: Adobe permits you to use, modify, and distribute this file
in accordance with the terms of the Adobe license agreement
accompanying it. If you have received this file from a source other
than Adobe, then your use, modification, or distribution of it
requires the prior written permission of Adobe.
\file WordFinderDlg.cpp
- Implements a modeless progress dialog and a generic prompt dialog.
// Acrobat headers
#ifdef WIN_PLATFORM
#include "PIHeaders.h"
#endif
#include "ADMAcroSDK.h"
#include "resource.h"
Constants/Declarations
static ADMDialogRef countDialog;
static AVWindow gAVWindow = NULL;
// Global variables used for simplicity
const ASInt32 MaxLen = 80;
static char textStr[MaxLen];
static char titleStr[MaxLen];
static char msgStr[MaxLen];
Modeless Progress Dialog
/* UpdateCountDialog
** Updates the dialog with a new GUI function to show count number
void UpdateCountDialog(ASInt32 cnt)
ADMItemRef itemRef;
itemRef = sADMDialog->GetItem(countDialog, IDC_COUNT);
sADMItem->SetIntValue(itemRef, cnt);
sADMDialog->Update(countDialog);
/* CreateCountDialog
/** GUI function to delete the count dialog
void DeleteCountDialog(void)
// destroy dialog
/*if (countDialog) {
sADMDialog->Destroy(countDialog);
countDialog = NULL;
// Release ADM
ADMUtils::ReleaseADM();*/
/* SettingsCountDialogOnInit
** Called to initialize the the dialog controls
ASErr ASAPI CountDialogOnInit(ADMDialogRef dialogRef)
ADMItemRef itemRef;
itemRef = sADMDialog->GetItem(dialogRef, IDC_COUNT);
sADMItem->SetUnits(itemRef, kADMNoUnits);
sADMItem->SetIntValue(itemRef, 0);
return kSPNoError;
/* CreateCountDialog
** Creates the modeless dialog.
void CreateCountDialog(void)
// Initialize ADM.
ADMUtils::InitializeADM();
// Display modeless dialog.
countDialog = sADMDialog->Create(sADMPluginRef, "ADBE:Wordfinder", IDD_COUNT_DIALOG,
kADMNoCloseFloatingDialogStyle, CountDialogOnInit, NULL, NULL);
Generic Prompt Dialog
/* PromptOnOK
** Called when the user clicks OK. Stores the string entered by the
** user.
static void ASAPI PromptOnOK(ADMItemRef item, ADMNotifierRef inNotifier )
sADMItem->DefaultNotify(item, inNotifier);
// get user input string
ADMDialogRef dialog = sADMItem->GetDialog(item);
ADMItemRef item1 = sADMDialog->GetItem(dialog, ID_PROMPT_FIELD);
sADMItem->GetText(item1, textStr, MaxLen);
sADMDialog->EndModal(dialog,IDOK,FALSE);
AVAppEndModal();
AVWindowDestroy(gAVWindow);
/* PromptDialogOnInit
** Called to initialize the dialog controls.
ASErr ASAPI PromptDialogOnInit(ADMDialogRef dialogRef)
gAVWindow = AVWindowNewFromPlatformThing (AVWLmodal, AVWIN_WANTSKEY, NULL, gExtensionID, sADMDialog->GetWindowRef(dialogRef));
AVAppBeginModal (gAVWindow);
sADMDialog->SetText(dialogRef, titleStr);
sADMDialog->SetDefaultItemID(dialogRef, IDOK);
sADMDialog->SetCancelItemID(dialogRef, IDCANCEL);
ADMItemRef itemRef;
itemRef = sADMDialog->GetItem(dialogRef, IDOK);
sADMItem->SetNotifyProc(itemRef, PromptOnOK);
itemRef = sADMDialog->GetItem(dialogRef, ID_PROMPT_FIELD);
sADMItem->SetUnits(itemRef, kADMNoUnits);
sADMItem->SetMinIntValue(itemRef, 1);
itemRef = sADMDialog->GetItem(dialogRef, ID_PROMPT_NAME);
sADMItem->SetText(itemRef, msgStr);
return kSPNoError;
/* PromptForInfo
/** Generic prompt dialog that gets a text string from the user.
/** @return IDOK or IDCANCEL.
ASInt32 PromptForInfo(const char *title, const char *msg, char *buf, ASInt32 bufLen)
if (!buf || (bufLen == 0))
ASRaise (GenError(genErrBadParm));
// Initialize ADM.
ADMUtils::InitializeADM();
// init data
buf[0] = 0;
strncpy(titleStr, title, sizeof(titleStr) - 1);
strncpy(msgStr, msg, sizeof(msgStr) - 1);
// Dispaly modal dialog to get user input
ASInt32 rc = sADMDialog->Modal(sADMPluginRef, "ADBE:Wordfinder", IDD_PROMPT_DIALOG,
kADMModalDialogStyle, PromptDialogOnInit, NULL, NULL);
// get user input data
if (rc==IDOK)
strcpy(buf, textStr);
// Release ADM
ADMUtils::ReleaseADM();
return rc;

Flash with wmode="transparent" doesn't work with non-US keyboard (like FF)

Safari has the same issue as FireFox (which they are finally fixing) :
https://bugzilla.mozilla.org/show_bug.cgi?id=347185
If you use Flash with wmode="transparent" then it treats all keyboards as if they are US keyboards.
For example try G.ho.st http://G.ho.st/vc.html with a non-US keyboard

I too am having issues. I am using Shockwave Flash 11.4.402.287 on Firefox 16.0.1. I am running on Windows 7 Enterprise. Disabling the plugin allows me to load pages quickly, but I am not able to view videos or play games. Firefox freezes upon loading a page that uses Flash. It remains frozen for an unacceptable length of time, then it will unfreeze on its own accord. The freeze affects the entire computer. I cannot interact with the desktop or the Windows start bar, and can only close Firefox by forcibly ending the "firefox.exe" process via Task Manager.
This is not the first version of Firefox that has displayed this problem to me. Firefox 15 also froze upon using Flash.
I had hoped that the latest Firefox update would solve this problem, but apparently not. Until then, I am forced to use Chrome, which is quite inconvenient for me as I am not at all familiar with that browser and am constantly clicking the settings button when I want to to go to my home page.
These freezes are incredibly frustrating and annoying. If Mozilla wishes to build a better Internet, they should try to make their browser a program that doesn't tempt me towards rage-quitting YouTube.

Problem with becomeFirstResponder and keyboard

Hi all,
I wonder why on its first call, my (modal) view controller works fine and the UITextField receives the 'becomeFirstResponder' message, has focus (i.e. the call does work!) but keyboard is not shown!!
Has anyone experienced this?
In subsequent calls when this view controller is showed, text field shows keyboard.
Rodrigo

I just ran into this problem in my new app. I have a view I display as a modal view. This view contains a single text field that I attempt to make the first responder.
If the modal view is displayed with animation the keyboard displays properly when 'becomeFirstResponder' is called on the text field. But, if the modal view is displayed without animation, the keyboard does NOT appear. No user interaction can make the keyboard appear.
Luckily I found a simple solution. I don't call 'becomeFirstResponder' in the 'viewDidLoad' method anymore. Instead I have the following code for 'viewDidAppear':
- (void)viewDidAppear:(BOOL)animated {
if (!animated) {
[txtField resignFirstResponder];
[txtField becomeFirstResponder];
This makes the keyboard show as expected whether the modal view was displayed with or without animation.
What's really weird is that in either case the 'viewDidAppear' method is getting called twice each time it appears. Why not once?

Problem with google and keyboard

Hi everybody. I am new to the forum and to the ipad. I have an iPad 2 and I am wondering if this is a problem. When I bring up google it comes up fine but when I tap on the box to enter text, the keyboard comes up and then imediately retracts. Is anybody having this problem.
Thanks
Kim

I just ran into this problem in my new app. I have a view I display as a modal view. This view contains a single text field that I attempt to make the first responder.
If the modal view is displayed with animation the keyboard displays properly when 'becomeFirstResponder' is called on the text field. But, if the modal view is displayed without animation, the keyboard does NOT appear. No user interaction can make the keyboard appear.
Luckily I found a simple solution. I don't call 'becomeFirstResponder' in the 'viewDidLoad' method anymore. Instead I have the following code for 'viewDidAppear':
- (void)viewDidAppear:(BOOL)animated {
if (!animated) {
[txtField resignFirstResponder];
[txtField becomeFirstResponder];
This makes the keyboard show as expected whether the modal view was displayed with or without animation.
What's really weird is that in either case the 'viewDidAppear' method is getting called twice each time it appears. Why not once?

Problem with rotation and keyboard click sound

Ok, there's still a problem with the rotation and keyboard click sound and I thought I had the problem fixed.
It's a serious bug when you want the keyboard click sound enbabled without having the rotation locked. I noticed this bug started when I had the previous iosinstalled 7.0.6.
Everytime I wanted to enable the keyboard click sound, I have to always go to settings and have lock rotation checked. And it would stay locked.
If I wanted to rotate my iPad, I have to have mute enabled, but no keyboard click sound.
I know it sounds confusing. I'm already confused... beh.

I completely forgot about that.
Thank you!

Problem with non lighting keyboard MB Air

Similar Messages

Maybe you are looking for