Problem with NotiCenter and Calendar; multiple bdays w/Gmail or Outlook

So I am trying to figure out how to run down a VERY annoying problem that affects both my calendar notifications as well as OmniFocus.
Using either my Google or Outlook.com calendar (not at the same time, either or) both calendars automatically include a calendar for contacts' birthdays. Apple's iCAL or whatever does this as well.
No matter if I hide the Apple birthday calendar or not, it still shows up in the notification center. Ditto for the Google/Outlook version. I've tried to disable that option on the website (Outlook or Gmail) but it's basically the same deal - it "hides" it, but it still "reports" it to the iPhone. So it shows up twice, once for the Apple contact birthdays and once for the Outlook.
This is incredibly annoying because then my notification is cluttered with two copies of each birthday, as is the calendar in OmniFocus.
Is there a way to disable either the Outlook or iCAL birthday calendar COMPLETELY (not just "hide" it, because hiding still reports to notification center even if it doesn't show up in the app itself)?

Hello Matthew,
I was researching the issue you are describing and found a way to disable the Birthday reminders on the iPhone in the settings. From the iPhone User Guide found here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf page 67:
Set default alert times for birthdays and events: Go to Settings > Mail, Contacts, Calendars > Default Alert Times.
When you go to the Default Alert times there is an option there for None which should disable a notification for the iPhone birthday calendar events.
Take care,
Sterling

Similar Messages

  • HT1386 Windows 8 Syncing Problem with Contacts and Calendars Office 2007 and iphone 4

    I have a new Dell Inspiron 17R and just did a sync with my iphone 4.  It wiped out my contact  and calendar listing.  I have selected the contacts and calenders sync option.  It is almost like the sync process can not fine the pst file on this new Windows 8 computer.

    For this particular issue, as suggested by yellowadept, go the the info tab at under the advanced section, choose replace contact information on iphone. This will over write any contact information on the iphone with what you have in address book on the computer.
    However, if you are interested in what part of the 111 contacts will be changed, you could open address book first. Then highlight all your contacts and click on file>export>as vcard. Then you could back up all your contacts to your desktop. After you export all your contacts then you could sync the iphone and allow the changes to see what changes were made. If the iphone actually changed anything, then you could delete all your contacts in address book, then import the vcards back in.
    Also, keeping a back-up of your contacts and calendars is a pretty good idea.
    Hope this helps.

  • Outlook 2013 problems with Contacts and Calendar

    I downloaded 2013 and now when I sync my iPhone 5 I can't see my old Calendar or Contacts....I now have a new empty calendar named Calendar (on this computer) and Contacts are named Contacts (on this computer) and are empty as well...How do I copy over the info that was on 2007 office currently on my computer?...It shows as an additional calendar but wo'tr sync to the iphone, same with contacts...
    Thanks...

    Hi and Welcome to the Community:
    Refer to this discussion please:
    http://supportforums.blackberry.com/t5/BlackBerry-​Desktop-Software/Desktop-Sync-deletes-events-from-​...
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problems with a shared calendar using Outlook 2007 and Exchange 2010

    Hello all,
    We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
    I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
    who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
    One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
    of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
    I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
    am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
    I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
    able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
    So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
    one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
    I realize this is a big mess, and your help would be greatly appreciated.

    Hi Nigel,
    How is the impact, just one user or all users, Outlook or OWA?
    If just one user, it seems like an issue on the Outlook Client side.
    Please trying to re-create new profile to fresh the caches.
    Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
    Found a similar thread for your reference:
    Calendar Sharing not available error message
    http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Calendar syncing problems with laptop and iphone

    Calendar entries on my iphone don't find their way to my ical on my laptop. When i connect and sync all ical entries are double entered on my phone. Please can anyone help.
    Driving me mad as i just can't rely on it!

    I think this might be the same problem I'm having, except that I'm having the same problem with both the calendar and the address book. I know things are syncing correctly between my work laptop, my home laptop, my home desktop, and MobileMe. My problem is with my phone. Everything synced fine until I upgraded to version 3. Then the phone would not update at all. I've tried to turn on the Contacts and Calendars in the Settings, but the "switches" won't stay ON. The Mail switch stays on with no problem. I finally forced the phone to sync through iTunes, but then I had double entries in the calendar and double contacts (on the phone only). So .. how to I get it to sync automatically, and how do I get rid of the double entries and contacts? Should I completely delete my account on my phone, and start over? I don't want to mess something up.

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with writing and reading using serialization

    I am having a problem with writing and reading an object that has another object in it. The purpose of the class is to write a order that has multiple items in it. And there will be several orders. This is for an IB project, where one of the requirements is to utilize a hierarchical composite data structure. That is, it is "one that contains more than one element and at least one of the elements is a composite data structure. Examples are, an array or linked list of records, a record that has one field that is another record, or an array". The code is shown below:
    The error produced is
    java.lang.NullPointerException
         at SamsonRubberIndustries.CustomerOrderDetails.createCustOrdDetailsScreen(CustomerOrderDetails.java:150)
         at SamsonRubberIndustries.CustomerOrderDetails$1.run(CustomerOrderDetails.java:78)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    public class CustOrdObject implements Serializable {
         public int CustID;
         public int CustOrderID;
         public Object OrderDate;
         public InnerCustOrdObject[] innerCustOrdObj;
         public float GrandTotal;
         public int MaxItems;
         public CustOrdObject() {}
         public CustOrdObject(InnerCustOrdObject[] innerCustOrdObj,
    int CustID, int CustOrderID, Object OrderDate,
    float GrandTotal, int innerarrlength, int innerarrpos, int MaxItems) {
              this.CustID = CustID;
              this.CustOrderID = CustOrderID;
              this.OrderDate = OrderDate;
              this.GrandTotal = GrandTotal;          
              this.MaxItems = MaxItems;
              this.innerCustOrdObj = new InnerCustOrdObject[MaxItems];
         public InnerCustOrdObject[] getInnerCustOrdObj() {
              return innerCustOrdObj;
         public void setInnerCustOrdObj(InnerCustOrdObject[] innerCustOrdObj) {
              this.innerCustOrdObj = innerCustOrdObj;
         public int getCustID() {
              return CustID;
         public void setCustID(int custID) {
              CustID = custID;
         public int getCustOrderID() {
              return CustOrderID;
         public void setCustOrderID(int custOrderID) {
              CustOrderID = custOrderID;
         public Object getOrderDate() {
              return OrderDate;
         public void setOrderDate(Object orderDate) {
              OrderDate = orderDate;
         public void setGrandTotal(float grandTotal) {
              GrandTotal = grandTotal;
         public float getGrandTotal() {
              return GrandTotal;
         public int getMaxItems() {
              return MaxItems;
         public void setMaxItems(int maxItems) {
              MaxItems = maxItems;
    public class InnerCustOrdObject implements Serializable{
         public int ItemNumber;
         public float UnitPrice;
         public int QuantityRequired;
         public float TotalPrice;
         public InnerCustOrdObject() {}
         public InnerCustOrdObject(int ItemNumber, float
    UnitPrice, int QuantityRequired, float TotalPrice){
              this.ItemNumber = ItemNumber;
              this.UnitPrice = UnitPrice;
              this.QuantityRequired = QuantityRequired;
              this.TotalPrice = TotalPrice;
         public int getItemNumber() {
              return ItemNumber;
         public void setItemNumber(int itemNumber) {
              ItemNumber = itemNumber;
         public int getQuantityRequired() {
              return QuantityRequired;
         public void setQuantityRequired(int quantityRequired) {
              QuantityRequired = quantityRequired;
         public float getTotalPrice() {
              return TotalPrice;
         public void setTotalPrice(float totalPrice) {
              TotalPrice = totalPrice;
         public float getUnitPrice() {
              return UnitPrice;
         public void setUnitPrice(float unitPrice) {
              UnitPrice = unitPrice;
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    import java.text.SimpleDateFormat;
    import java.util.Date;
    import javax.swing.*;
    import javax.swing.table.DefaultTableCellRenderer;
    import javax.swing.table.DefaultTableModel;
    public class CustomerOrderDetails extends CommonFeatures{
         //TODO
         private static int MAX_ORDERS = 200;
         private static int MAX_ORDERITEMS = 100;
         private static int MaxRecord;
         private static int CurrentRecord = 1;
         private static int currentItem;
         private static int MaxItems;
         private static boolean FileExists, recFileExists;
         private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
         private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];     
         private static File OrderDetailsFile = new File("CustOrdDetails.dat");
         private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
         private static PrintWriter writeFile;
         private static BufferedReader readFile;
         private static ObjectOutputStream objOut;
         private static ObjectInputStream objIn;
         //Set format for date
         SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
         //--<BEGINNING>--Declaring Interface Variables------------------------------------------//
         private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
         private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
         private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
         private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
         //--<END>--Declaring Interface Variables------------------------------------------------//
         public static void main(String[] args) {
              final CustomerOrderDetails COD = new CustomerOrderDetails();
              java.awt.EventQueue.invokeLater(new Runnable() {
                   public void run() {
                        try {
                             UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
                             COD.createCustOrdDetailsScreen();
                        } catch (Exception eb) {
                             eb.printStackTrace();
         //--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
         public JFrame createCustOrdDetailsScreen() {
              createDefaultFrame();
              mainframe.setSize(800,500);
              createContainerPanel();
              containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
              containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
              //containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
              //containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
              containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
              mainframe.setContentPane(containerpanel);
              mainframe.setLocationRelativeTo(null);
              mainframe.setVisible(true);
              //--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
              if (OrdRecordNumStore.exists() == true) {
                   recFileExists = true;
              }else {
                   recFileExists = false;
              if (recFileExists == true) {
                   MaxRecord = readRecordNumber();
                   CurrentRecord = MaxRecord;
                   //readOrder();
                   //readInnerOrderRecord(CurrentRecord);
                   System.out.println("Current Record " +CurrentRecord);
                   System.out.println("Max Record " +MaxRecord);
              }else{
                   MaxRecord = 1;
                   writeRecordNumber(MaxRecord);
                   CustOrderIDTxt.setText(""+MaxRecord);
                   System.out.println("Current Record " +CurrentRecord);
                   System.out.println("Max Record " +MaxRecord);
              //--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
              if(readOrder() != null){
                   orderDetails = (CustOrdObject[]) readOrder();
                 innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
                   MaxItems = orderDetails[CurrentRecord].getMaxItems();
                   if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
                        externalnextbtn.setEnabled(true);
                        externalprevbtn.setEnabled(true);
                   if(CurrentRecord >= MaxRecord){
                        externalnextbtn.setEnabled(false);
                   getFieldText(CurrentRecord-1);
              }else{
                   orderDetails[CurrentRecord] = new CustOrdObject();
                   currentItem = 1;
              return mainframe;
         //--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
         public JPanel createCustOrdDetailsTitle(){
              createTitlePanel();
              titlepanel.setBackground(TxtfontColor);
              label.setText("- Customer Order Details -");
              labelpanel.setBackground(TxtfontColor);
              label.setForeground(Color.white);
              createbuttonpanel();
              buttonpanel.setBackground(TxtfontColor) ;
              buttonpanel.add(createReturnToMainMenuButton());
              titlepanel.add(labelpanel, BorderLayout.WEST);
              titlepanel.add(buttonpanel, BorderLayout.EAST);
              return titlepanel;
         public JPanel createCustOrdDetailsMainPanel(){
              createmainpanel();
              mainpanel.setBackground(TxtfontColor);
              mainpanel.setLayout(new BorderLayout());          
              mainpanel.setBorder(BorderFactory.createTitledBorder(""));
              mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
              mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
              mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
              mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
              mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
              return mainpanel;
         public JPanel createInnerTopPanel(){
              innertoppanel = new JPanel(new GridBagLayout());
              innertoppanel.setBackground(TxtfontColor);
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              //Setting Font Type and Size
              Font font = new Font("Arial", Font.BOLD, 11);
              CustIDLbl = new JLabel("Customer ID");
              CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              CustIDLbl.setFont(font);
              CustIDLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 1;
              innertoppanel.add(CustIDLbl, GBC);     
              CustIDTxt = new JTextField(20);
              CustIDTxt.setEditable(true);
              GBC.gridx = 2;
              GBC.gridy = 1;
              innertoppanel.add(CustIDTxt, GBC);
              GBC.gridx = 3;
              GBC.gridy = 1;
              innertoppanel.add(Box.createHorizontalStrut(220), GBC);
              OrderedDateLbl = new JLabel("Order Date");
              OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              OrderedDateLbl.setFont(font);
              OrderedDateLbl.setForeground(LblfontColor);
              GBC.gridx = 4;
              GBC.gridy = 1;
              innertoppanel.add(OrderedDateLbl, GBC);     
              //Get today's date
              Date todaydate = new Date();
              OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
              OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
              OrderedDateTxt.setEditable(false);
              GBC.gridx = 5;
              GBC.gridy = 1;
              innertoppanel.add(OrderedDateTxt, GBC);
              CustOrderIDLbl = new JLabel("Customer Order ID");
              CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              CustOrderIDLbl.setFont(font);
              CustOrderIDLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 2;
              innertoppanel.add(CustOrderIDLbl, GBC);
              CustOrderIDTxt = new JTextField(20);
              CustOrderIDTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 2;
              innertoppanel.add(CustOrderIDTxt, GBC);
              return innertoppanel;
         public JPanel createInnerCenterPanel(){
              innercenterpanel = new JPanel(new GridBagLayout());
              innercenterpanel.setBackground(TxtfontColor);
              innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              //Setting Font Type and Size
              Font font = new Font("Arial", Font.BOLD, 11);
              ItemNumberLbl = new JLabel("Item Number");
              ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              ItemNumberLbl.setFont(font);
              ItemNumberLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 1;
              innercenterpanel.add(ItemNumberLbl, GBC);     
              ItemNumberTxt = new JTextField(20);
              GBC.gridx = 2;
              GBC.gridy = 1;
              innercenterpanel.add(ItemNumberTxt, GBC);
              UnitPriceLbl = new JLabel("Unit Price");
              UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              UnitPriceLbl.setFont(font);
              UnitPriceLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 2;
              innercenterpanel.add(UnitPriceLbl, GBC);     
              UnitPriceTxt = new JTextField(20);
              //UnitPriceTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 2;
              innercenterpanel.add(UnitPriceTxt, GBC);
              QuantityReqLbl = new JLabel("Quantity Required");
              QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              QuantityReqLbl.setFont(font);
              QuantityReqLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 3;
              innercenterpanel.add(QuantityReqLbl, GBC);     
              QuantityReqTxt = new JTextField(20);
              //QuantityReqTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 3;
              innercenterpanel.add(QuantityReqTxt, GBC);
              TotPriceLbl = new JLabel("Total Price");
              TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              TotPriceLbl.setFont(font);
              TotPriceLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 4;
              innercenterpanel.add(TotPriceLbl, GBC);     
              TotPriceTxt = new JTextField(20);
              //TotPriceTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 4;
              innercenterpanel.add(TotPriceTxt, GBC);
              return innercenterpanel;
         public JPanel createInnerBottomPanel(){
              innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
              innerbottompanel.setBackground(TxtfontColor);
              //Setting Font Type and Size
              Font font = new Font("Arial", Font.BOLD, 11);
              GrandTotLbl = new JLabel("Grand Total");
              GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              GrandTotLbl.setFont(font);
              GrandTotLbl.setForeground(LblfontColor);
              innerbottompanel.add(GrandTotLbl);
              innerbottompanel.add(Box.createHorizontalStrut(30));
              GrandTotTxt = new JTextField(20);
              innerbottompanel.add(GrandTotTxt);
              return innerbottompanel;
         public JPanel createInnerRightPanel(){
              innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
              innerrightpanel.setBackground(TxtfontColor);
              innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
              innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
              innerrightpanel.setLayout(new GridBagLayout());          
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              internalnextbtn = new JButton(createNextButtonIcon());
              GBC.gridx = 1;
              GBC.gridy = 1;
              internalnextbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        //getInnerFieldText(currentItem);
                        internalprevbtn.setEnabled(true);
                        if(currentItem < MaxItems){
                             ++CurrentRecord;
                             //readOrder();
                             //readInnerOrderRecord(CurrentRecord);
                             setInnerFieldText(currentItem);
                             System.out.println(CurrentRecord);//Checking RECORD_NUM
                        if(currentItem == MaxItems){
                             internalnextbtn.setEnabled(false);
              innerrightpanel.add(internalnextbtn, GBC);
              return innerrightpanel;
         public JPanel createInnerLeftPanel(){
              innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
              innerleftpanel.setBackground(TxtfontColor);
              innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
              innerleftpanel.setForeground(Color.BLACK);
              innerleftpanel.setLayout(new GridBagLayout());          
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              internalprevbtn = new JButton(createPreviousButtonIcon());
              GBC.gridx = 1;
              GBC.gridy = 1;
              internalprevbtn.addActionListener(new ActionListener(){
                   public void  actionPerformed(ActionEvent evt){
                        //getInnerFieldText(currentItem);
                        internalnextbtn.setEnabled(true);
                        if(currentItem == 1){
                             internalprevbtn.setEnabled(false);
                        if(currentItem > 0){
                             --currentItem;
                             //readOrder();
                             setInnerFieldText(currentItem);
              innerleftpanel.add(internalprevbtn, GBC);
              return innerleftpanel;
         public JPanel createCustOrdDetailsButtons(){
              createbuttonpanel();
              buttonpanel.setBackground(TxtfontColor);
              externalprevbtn = new JButton(createPreviousButtonIcon());
              externalprevbtn.addActionListener(new ActionListener(){
                   public void  actionPerformed(ActionEvent evt){
                        getFieldText(CurrentRecord);
                        externalnextbtn.setEnabled(true);
                        if(CurrentRecord == 1){
                             externalprevbtn.setEnabled(false);
                        if(CurrentRecord > 0){
                             --CurrentRecord;
                             setFieldText(CurrentRecord);
                             System.out.println(CurrentRecord);//Checking RECORD_NUM
              buttonpanel.add(externalprevbtn);
              addrecordbtn = new JButton("Add Record", createAddButtonIcon());
              addrecordbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        try{
                             MaxRecord = readRecordNumber();
                             MaxRecord++;
                             writeRecordNumber(MaxRecord);
                             //--<BEGINNING>--Clear Fields-------------------------------------------------------//
                             CustIDTxt.setText("");
                             CustOrderIDTxt.setText(""+MaxRecord);
                             //Get today's date
                             Date todaydate = new Date();
                             OrderedDateTxt.setText(""+simpleDF.format(todaydate));
                             ItemNumberTxt.setText("");
                             UnitPriceTxt.setText("");
                             QuantityReqTxt.setText("");
                             TotPriceTxt.setText("");
                             GrandTotTxt.setText("");
                             //--<END>--Clear Fields-------------------------------------------------------------//
                             externalnextbtn.setEnabled(false);
                             externalprevbtn.setEnabled(true);
                             System.out.println(MaxRecord);
                        } catch(Exception ec){ec.printStackTrace();}
              buttonpanel.add(addrecordbtn);
              savebtn = new JButton("Save Data", createSaveButtonIcon());
              savebtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        setFieldText(CurrentRecord);
                        writeOrder();
                        writeRecordNumber(MaxRecord);
                        System.out.println(CurrentRecord);
                        System.out.println(MaxRecord);
              buttonpanel.add(savebtn);
              java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
              ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
              additemreqbtn = new JButton("Add Item", AddRowIcon);
              additemreqbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        try{
                             //--<BEGINNING>--Clear Fields-------------------------------------------------------//
                             ItemNumberTxt.setText("");
                             UnitPriceTxt.setText("");
                             QuantityReqTxt.setText("");
                             TotPriceTxt.setText("");
                             //--<END>--Clear Fields-------------------------------------------------------------//
                             //CurrentRecord = MaxRecord;
                             currentItem++;
                             setInnerFieldText(currentItem);
                             internalnextbtn.setEnabled(false);
                             internalprevbtn.setEnabled(true);
                             System.out.println(MaxRecord);
                        } catch(Exception ec){ec.printStackTrace();}
              buttonpanel.add(additemreqbtn);
              externalnextbtn = new JButton(createNextButtonIcon());
              externalnextbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        getFieldText(CurrentRecord);
                        externalprevbtn.setEnabled(true);
                        if(CurrentRecord < MaxRecord){
                             ++CurrentRecord;
                             setFieldText(CurrentRecord);
                             System.out.println(CurrentRecord);//Checking RECORD_NUM
                        if(CurrentRecord == MaxRecord){
                             externalnextbtn.setEnabled(false);
              buttonpanel.add(externalnextbtn);
              return buttonpanel;
         //TODO
         public void setFieldText(int orderID){//TODO
              orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
              orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
              orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
              orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
              orderDetails[orderID].setMaxItems(MaxItems);
              setInnerFieldText(currentItem);
              orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
         public void setInnerFieldText(int currentItem){//TODO
              innerCustOrdObj[currentItem] = new InnerCustOrdObject();
              innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
              innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
              innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
              innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
         public void getFieldText(int orderID){
              CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
              CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
              OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());          
              currentItem = orderDetails[orderID].getMaxItems();
              System.err.println("currentItem" + currentItem);
              getInnerFieldText(currentItem);
              GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
         public void getInnerFieldText(int currentItem){
              ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
              UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
              QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
              TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
         public void writeOrder(){//TODO
              try {
                   objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
                   objOut.writeObject(orderDetails);
                   System.out.println("WORKING!");
                   objOut.flush();
                   objOut.close();
              } catch (IOException e) {
                   e.printStackTrace();
         public Object readOrder(){
              Object temporaryObj;
              try{
                   objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
                   temporaryObj = objIn.readObject();               
                   CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
                   System.out.println("Outer: "+blah[1].getCustID());
                   InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
                   System.out.println("Inner: "+whee[1].getItemNumber());
                   objIn.close();
                   System.out.println("Read Worky!");
                   return temporaryObj;
              }catch(Exception e){
                   e.printStackTrace();
                   System.out.println("Read No Worky!");
                   return null;
         public void writeRecordNumber(int MaxRecord){
              try{
                   objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
                   objOut.writeObject(MaxRecord);
                   System.out.println("WORKING!");
                   objOut.flush();
                   objOut.close();
              }catch(Exception e){e.printStackTrace();}
         public int readRecordNumber() {
              try {
                   objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
                   int temporaryObj = Integer.parseInt(objIn.readObject().toString());
                   objIn.close();
                   System.out.println("Read Number Worky!");
                   return temporaryObj;
              } catch (Exception e) {
                   e.printStackTrace();
                   System.out.println("Read Number No Worky!");
                   return -1;
    }Message was edited by:
    Kilik07
    Message was edited by:
    Kilik07

    ok i got reading to work to a certain extent... but the prob is i cnt seem to save my innerCustOrdObj proprly...when ever i look for a record using the gotorecordbtn, the outerobject, which is the orderDetails, seems to change but the innerCustOrdObj remains the same... heres the new code..
    public class CustomerOrderDetails extends CommonFeatures{
         //TODO
         private static int MAX_ORDERS = 200;
         private static int MAX_ORDERITEMS = 100;
         private static int MaxRecord;
         private static int CurrentRecord = 1;
         private static int currentItem;
         private static int MaxItems = 1;
         private static boolean FileExists, recFileExists;
         private static boolean RecordExists;
         private static CustOrdObject[] orderDetails = new CustOrdObject[MAX_ORDERS];
         private static InnerCustOrdObject[] innerCustOrdObj = new InnerCustOrdObject[MAX_ORDERITEMS];     
         private static File OrderDetailsFile = new File("CustOrdDetails.ser");
         private static File OrdRecordNumStore = new File("OrdRecordNumStore.txt");
         private static PrintWriter writeFile;
         private static BufferedReader readFile;
         private static ObjectOutputStream objOut;
         private static ObjectInputStream objIn;
         //Set format for date
         SimpleDateFormat simpleDF = new SimpleDateFormat("dd MM yyyy");
         //--<BEGINNING>--Declaring Interface Variables------------------------------------------//
         private JPanel innertoppanel, innercenterpanel, innerbottompanel, innerrightpanel, innerleftpanel;
         private JLabel CustIDLbl, CustOrderIDLbl, OrderedDateLbl, GrandTotLbl, ItemNumberLbl,UnitPriceLbl, QuantityReqLbl, TotPriceLbl;
         private JTextField CustIDTxt, CustOrderIDTxt, OrderedDateTxt, GrandTotTxt, ItemNumberTxt, UnitPriceTxt, QuantityReqTxt, TotPriceTxt;
         private JButton addrecordbtn, savebtn, externalprevbtn, externalnextbtn, internalprevbtn, internalnextbtn, gotorecordbtn, additemreqbtn;
         //--<END>--Declaring Interface Variables------------------------------------------------//
         public static void main(String[] args) {
              final CustomerOrderDetails COD = new CustomerOrderDetails();
              java.awt.EventQueue.invokeLater(new Runnable() {
                   public void run() {
                        try {
                             UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
                             COD.createCustOrdDetailsScreen();
                        } catch (Exception eb) {
                             eb.printStackTrace();
         //--<BEGINNING>--Creating CustomerOrderDetails Screen---------------------------------------//
         public JFrame createCustOrdDetailsScreen() {
              createDefaultFrame();
              mainframe.setSize(800,500);
              createContainerPanel();
              containerpanel.add(createCustOrdDetailsTitle(), BorderLayout.NORTH);
              containerpanel.add(createCustOrdDetailsMainPanel(), BorderLayout.CENTER);
              //containerpanel.add(createCustOrdDetailsLeftNavButtons(), BorderLayout.WEST);
              //containerpanel.add(createCustOrdDetailsRightNavButtons(), BorderLayout.EAST);
              containerpanel.add(createCustOrdDetailsButtons(), BorderLayout.SOUTH);
              mainframe.setContentPane(containerpanel);
              mainframe.setLocationRelativeTo(null);
              mainframe.setVisible(true);
              //--<BEGINNING>--Checks to see whether CRecordNumberStore file exists-------------------------------//
              if (OrdRecordNumStore.exists() == true) {
                   recFileExists = true;
              }else {
                   recFileExists = false;
              if (recFileExists == true) {
                   MaxRecord = readRecordNumber();
                   CurrentRecord = MaxRecord;
                   //readOrder();
                   //readInnerOrderRecord(CurrentRecord);
                   System.out.println("Current Record " +CurrentRecord);
                   System.out.println("Max Record " +MaxRecord);
              }else{
                   MaxRecord = 1;
                   writeRecordNumber(MaxRecord);
                   CustOrderIDTxt.setText(""+MaxRecord);
                   System.out.println("Current Record " +CurrentRecord);
                   System.out.println("Max Record " +MaxRecord);
              //--<END>--Checks to see whether CRecordNumberStore file exists--------------------------------------//
              if(readOrder() != null){
                   orderDetails = (CustOrdObject[]) readOrder();
                   //CurrentRecord--;
                   //System.out.println("Current Rec Here"+CurrentRecord);
                   if(orderDetails[CurrentRecord] == null){
                        System.err.println("CustomerOrderObj 1 is null !!");
                   }else{
                        System.err.println("CustomerOrderObj 1 is  not null !!");
                   if(orderDetails[CurrentRecord].getInnerCustOrdObj() == null){
                        System.err.println("InnerCustomerOrderObj is null !!");
                   }else{
                        System.err.println("InnerCustomerOrderObj is  not null !!");
                   innerCustOrdObj = orderDetails[CurrentRecord].getInnerCustOrdObj();
                   MaxItems = orderDetails[CurrentRecord].getMaxItems();
                   if(CurrentRecord > 1 && CurrentRecord < MaxRecord){
                        externalnextbtn.setEnabled(true);
                        externalprevbtn.setEnabled(true);
                   if(CurrentRecord >= MaxRecord){
                        externalnextbtn.setEnabled(false);
                   getFieldText(CurrentRecord);
                   getInnerFieldText(MaxItems);
              }else{
                   orderDetails[CurrentRecord] = new CustOrdObject();
                   currentItem = 1;
              return mainframe;
         //--<END>--Creating CustomerOrderDetails Screen---------------------------------------------//
         public JPanel createCustOrdDetailsTitle(){
              createTitlePanel();
              titlepanel.setBackground(TxtfontColor);
              label.setText("- Customer Order Details -");
              labelpanel.setBackground(TxtfontColor);
              label.setForeground(Color.white);
              createbuttonpanel();
              buttonpanel.setBackground(TxtfontColor) ;
              buttonpanel.add(createReturnToMainMenuButton());
              titlepanel.add(labelpanel, BorderLayout.WEST);
              titlepanel.add(buttonpanel, BorderLayout.EAST);
              return titlepanel;
         public JPanel createCustOrdDetailsMainPanel(){
              createmainpanel();
              mainpanel.setBackground(TxtfontColor);
              mainpanel.setLayout(new BorderLayout());          
              mainpanel.setBorder(BorderFactory.createTitledBorder(""));
              mainpanel.add(createInnerTopPanel(), BorderLayout.NORTH);
              mainpanel.add(createInnerCenterPanel(), BorderLayout.CENTER);
              mainpanel.add(createInnerBottomPanel(), BorderLayout.SOUTH);
              mainpanel.add(createInnerRightPanel(), BorderLayout.EAST);
              mainpanel.add(createInnerLeftPanel(), BorderLayout.WEST);
              return mainpanel;
         public JPanel createInnerTopPanel(){
              innertoppanel = new JPanel(new GridBagLayout());
              innertoppanel.setBackground(TxtfontColor);
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              //Setting Font Type and Size
              Font font = new Font("Arial", Font.BOLD, 11);
              CustIDLbl = new JLabel("Customer ID");
              CustIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              CustIDLbl.setFont(font);
              CustIDLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 1;
              innertoppanel.add(CustIDLbl, GBC);     
              CustIDTxt = new JTextField(20);
              CustIDTxt.setEditable(true);
              GBC.gridx = 2;
              GBC.gridy = 1;
              innertoppanel.add(CustIDTxt, GBC);
              GBC.gridx = 3;
              GBC.gridy = 1;
              innertoppanel.add(Box.createHorizontalStrut(220), GBC);
              OrderedDateLbl = new JLabel("Order Date");
              OrderedDateLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              OrderedDateLbl.setFont(font);
              OrderedDateLbl.setForeground(LblfontColor);
              GBC.gridx = 4;
              GBC.gridy = 1;
              innertoppanel.add(OrderedDateLbl, GBC);     
              //Get today's date
              Date todaydate = new Date();
              OrderedDateTxt = new JTextField(simpleDF.format(todaydate), 20);
              OrderedDateTxt.setHorizontalAlignment(JTextField.CENTER);
              OrderedDateTxt.setEditable(false);
              GBC.gridx = 5;
              GBC.gridy = 1;
              innertoppanel.add(OrderedDateTxt, GBC);
              CustOrderIDLbl = new JLabel("Customer Order ID");
              CustOrderIDLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              CustOrderIDLbl.setFont(font);
              CustOrderIDLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 2;
              innertoppanel.add(CustOrderIDLbl, GBC);
              CustOrderIDTxt = new JTextField(20);
              //CustOrderIDTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 2;
              innertoppanel.add(CustOrderIDTxt, GBC);
              return innertoppanel;
         public JPanel createInnerCenterPanel(){
              innercenterpanel = new JPanel(new GridBagLayout());
              innercenterpanel.setBackground(TxtfontColor);
              innercenterpanel.setBorder(BorderFactory.createLoweredBevelBorder());
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              //Setting Font Type and Size
              Font font = new Font("Arial", Font.BOLD, 11);
              ItemNumberLbl = new JLabel("Item Number");
              ItemNumberLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              ItemNumberLbl.setFont(font);
              ItemNumberLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 1;
              innercenterpanel.add(ItemNumberLbl, GBC);     
              ItemNumberTxt = new JTextField(20);
              GBC.gridx = 2;
              GBC.gridy = 1;
              innercenterpanel.add(ItemNumberTxt, GBC);
              UnitPriceLbl = new JLabel("Unit Price");
              UnitPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              UnitPriceLbl.setFont(font);
              UnitPriceLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 2;
              innercenterpanel.add(UnitPriceLbl, GBC);     
              UnitPriceTxt = new JTextField(20);
              //UnitPriceTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 2;
              innercenterpanel.add(UnitPriceTxt, GBC);
              QuantityReqLbl = new JLabel("Quantity Required");
              QuantityReqLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              QuantityReqLbl.setFont(font);
              QuantityReqLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 3;
              innercenterpanel.add(QuantityReqLbl, GBC);     
              QuantityReqTxt = new JTextField(20);
              //QuantityReqTxt.setEditable(false);
              GBC.gridx = 2;
              GBC.gridy = 3;
              innercenterpanel.add(QuantityReqTxt, GBC);
              TotPriceLbl = new JLabel("Total Price");
              TotPriceLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              TotPriceLbl.setFont(font);
              TotPriceLbl.setForeground(LblfontColor);
              GBC.gridx = 1;
              GBC.gridy = 4;
              innercenterpanel.add(TotPriceLbl, GBC);     
              TotPriceTxt = new JTextField(20);
              TotPriceTxt.setEditable(false);
              TotPriceTxt.addFocusListener(new FocusAdapter(){
                   public void focusGained(FocusEvent evt){
                        TotPriceTxt.setText(""+Integer.parseInt(UnitPriceTxt.getText())*Integer.parseInt(QuantityReqTxt.getText()));
              GBC.gridx = 2;
              GBC.gridy = 4;
              innercenterpanel.add(TotPriceTxt, GBC);
              return innercenterpanel;
         public JPanel createInnerBottomPanel(){
              innerbottompanel = new JPanel(new FlowLayout(FlowLayout.RIGHT));
              innerbottompanel.setBackground(TxtfontColor);
              //Setting Font Type and Size
              Font font = new Font("Arial", Font.BOLD, 11);
              GrandTotLbl = new JLabel("Grand Total");
              GrandTotLbl.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
              GrandTotLbl.setFont(font);
              GrandTotLbl.setForeground(LblfontColor);
              innerbottompanel.add(GrandTotLbl);
              innerbottompanel.add(Box.createHorizontalStrut(30));
              GrandTotTxt = new JTextField(20);
              innerbottompanel.add(GrandTotTxt);
              return innerbottompanel;
         public JPanel createInnerRightPanel(){
              innerrightpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
              innerrightpanel.setBackground(TxtfontColor);
              innerrightpanel.setLayout(new BoxLayout(navrightpanel, BoxLayout.Y_AXIS));
              innerrightpanel.setBorder(BorderFactory.createLoweredBevelBorder());
              innerrightpanel.setLayout(new GridBagLayout());          
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              internalnextbtn = new JButton(createNextButtonIcon());
              GBC.gridx = 1;
              GBC.gridy = 1;
              internalnextbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        getInnerFieldText(currentItem);
                        internalprevbtn.setEnabled(true);
                        if(currentItem < MaxItems){
                             ++currentItem;
                             orderDetails[CurrentRecord].getInnerCustOrdObj();
                             setInnerFieldText(currentItem);
                             System.out.println("Current Item" + currentItem);
                        if(currentItem == MaxItems){
                             internalnextbtn.setEnabled(false);
              innerrightpanel.add(internalnextbtn, GBC);
              return innerrightpanel;
         public JPanel createInnerLeftPanel(){
              innerleftpanel = new JPanel(new FlowLayout(FlowLayout.CENTER));
              innerleftpanel.setBackground(TxtfontColor);
              innerleftpanel.setBorder(BorderFactory.createLoweredBevelBorder());
              innerleftpanel.setForeground(Color.BLACK);
              innerleftpanel.setLayout(new GridBagLayout());          
              GridBagConstraints GBC = new GridBagConstraints();
              GBC.fill = GridBagConstraints.HORIZONTAL;
              internalprevbtn = new JButton(createPreviousButtonIcon());
              GBC.gridx = 1;
              GBC.gridy = 1;
              internalprevbtn.addActionListener(new ActionListener(){
                   public void  actionPerformed(ActionEvent evt){
                        getInnerFieldText(currentItem);
                        internalnextbtn.setEnabled(true);
                        if(currentItem == 1){
                             internalprevbtn.setEnabled(false);
                        if(currentItem > 0){
                             --currentItem;
                             orderDetails[CurrentRecord].getInnerCustOrdObj();
                             setInnerFieldText(currentItem);
                             System.out.println("Current Item" + currentItem);
              innerleftpanel.add(internalprevbtn, GBC);
              return innerleftpanel;
         public JPanel createCustOrdDetailsButtons(){
              createbuttonpanel();
              buttonpanel.setBackground(TxtfontColor);
              externalprevbtn = new JButton(createPreviousButtonIcon());
              externalprevbtn.addActionListener(new ActionListener(){
                   public void  actionPerformed(ActionEvent evt){
                        getFieldText(CurrentRecord);
                        externalnextbtn.setEnabled(true);
                        if(CurrentRecord == 1){
                             externalprevbtn.setEnabled(false);
                        if(CurrentRecord > 0){
                             --CurrentRecord;
                             setFieldText(CurrentRecord);
                             System.out.println("Current Record " + CurrentRecord);//Checking RECORD_NUM
              buttonpanel.add(externalprevbtn);
              addrecordbtn = new JButton("Add Record", createAddButtonIcon());
              addrecordbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        try{
                             MaxRecord = readRecordNumber();
                             MaxRecord++;
                             CurrentRecord = MaxRecord;
                             orderDetails[CurrentRecord] = new CustOrdObject();
                             writeRecordNumber(MaxRecord);
                             MaxItems = 1;
                             innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
                             //--<BEGINNING>--Clear Fields-------------------------------------------------------//
                             CustIDTxt.setText("");
                             CustOrderIDTxt.setText(""+MaxRecord);
                             //Get today's date
                             Date todaydate = new Date();
                             OrderedDateTxt.setText(""+simpleDF.format(todaydate));
                             ItemNumberTxt.setText("");
                             UnitPriceTxt.setText("");
                             QuantityReqTxt.setText("");
                             TotPriceTxt.setText("");
                             GrandTotTxt.setText("");
                             //--<END>--Clear Fields-------------------------------------------------------------//
                             externalnextbtn.setEnabled(false);
                             externalprevbtn.setEnabled(true);
                             System.out.println(MaxRecord);
                        } catch(Exception ec){ec.printStackTrace();}
              buttonpanel.add(addrecordbtn);
              savebtn = new JButton("Save Data", createSaveButtonIcon());
              savebtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        setFieldText(CurrentRecord);
                        setInnerFieldText(MaxItems);
                        writeOrder();
                        writeRecordNumber(MaxRecord);
                        System.out.println(CurrentRecord);
                        System.out.println(MaxRecord);
              buttonpanel.add(savebtn);
              java.net.URL imageURL_AddRowIcon = CommonFeatures.class.getResource("Icons/edit_add.png");
              ImageIcon AddRowIcon = new ImageIcon(imageURL_AddRowIcon);
              additemreqbtn = new JButton("Add Item", AddRowIcon);
              additemreqbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        try{
                             //--<BEGINNING>--Clear Fields-------------------------------------------------------//
                             ItemNumberTxt.setText("");
                             UnitPriceTxt.setText("");
                             QuantityReqTxt.setText("");
                             TotPriceTxt.setText("");
                             //--<END>--Clear Fields-------------------------------------------------------------//
                             //CurrentRecord = MaxRecord;
                             MaxItems++;
                             innerCustOrdObj[MaxItems] = new InnerCustOrdObject();
                             System.out.println("Max Items "+MaxItems);
                             currentItem = MaxItems;
                             orderDetails[CurrentRecord].setMaxItems(MaxItems);
                             ///setInnerFieldText(currentItem);
                             internalnextbtn.setEnabled(false);
                             internalprevbtn.setEnabled(true);
                        } catch(Exception ec){ec.printStackTrace();}
              buttonpanel.add(additemreqbtn);
              externalnextbtn = new JButton(createNextButtonIcon());
              externalnextbtn.addActionListener(new ActionListener(){
                   public void actionPerformed(ActionEvent evt){
                        getFieldText(CurrentRecord);
                        externalprevbtn.setEnabled(true);
                        if(CurrentRecord < MaxRecord){
                             ++CurrentRecord;
                             setFieldText(CurrentRecord);
                             System.out.println(CurrentRecord);//Checking RECORD_NUM
                        if(CurrentRecord == MaxRecord){
                             externalnextbtn.setEnabled(false);
              buttonpanel.add(externalnextbtn);
              gotorecordbtn = new JButton("Go To Record", createGotoButtonIcon());
              gotorecordbtn.addActionListener(new ActionListener() {
                   public void actionPerformed(ActionEvent evt){
                         * The text from the GotorecordTxt textfield will be taken and assigned
                         * to a temporary integer variable called Find. 
                        int Find = Integer.parseInt(CustOrderIDTxt.getText());
                        for(int j=1; j <= MaxRecord; j++){
                              * Using a for loop, each record can be read using the readCustRecord
                              * method.
                             getFieldText(j);
                              * An if condition is utilized to check whether the temporary stored variable, Find,
                              * matches a field in a record. If this record is found, then using the RecordExists
                              * which was declared at the top, either a true or false statement can be assigned
                              * If the record exists, then a true statement will be assigned, if not a false
                              * statement will be assigned.
                             if(orderDetails[j].getCustOrderID() == Find){
                                  RecordExists = true;
                                  break;
                             }else{
                                  RecordExists = false;
                        if(RecordExists == false){
                              * If the RecordExists is assigned a false statement, then a message will be
                              * displayed to show that the record does not exist.
                             JOptionPane.showMessageDialog(null, "Record Does Not Exist!", "Error Message", JOptionPane.ERROR_MESSAGE, createErrorIcon());
                        }else{
                             getFieldText(Find);
              buttonpanel.add(gotorecordbtn);
              return buttonpanel;
         //TODO
         public void setFieldText(int orderID){//TODO
              orderDetails[orderID].setCustID(Integer.parseInt(CustIDTxt.getText()));
              orderDetails[orderID].setCustOrderID(Integer.parseInt(CustOrderIDTxt.getText()));
              orderDetails[orderID].setOrderDate(OrderedDateTxt.getText());
              orderDetails[orderID].setInnerCustOrdObj(innerCustOrdObj);
              orderDetails[orderID].setMaxItems(MaxItems);
              setInnerFieldText(currentItem);
              orderDetails[orderID].setGrandTotal(Float.parseFloat(GrandTotTxt.getText()));
         public void setInnerFieldText(int currentItem){//TODO
              innerCustOrdObj[currentItem] = new InnerCustOrdObject();
              innerCustOrdObj[currentItem].setMaxItems(MaxItems);
              innerCustOrdObj[currentItem].setItemNumber(Integer.parseInt(ItemNumberTxt.getText()));
              innerCustOrdObj[currentItem].setUnitPrice(Float.parseFloat(UnitPriceTxt.getText()));
              innerCustOrdObj[currentItem].setQuantityRequired(Integer.parseInt(QuantityReqTxt.getText()));
              innerCustOrdObj[currentItem].setTotalPrice(Float.parseFloat(TotPriceTxt.getText()));
         public void getFieldText(int orderID){
              CustIDTxt.setText(Integer.toString(orderDetails[orderID].getCustID()));
              CustOrderIDTxt.setText(Integer.toString(orderDetails[orderID].getCustOrderID()));
              OrderedDateTxt.setText(""+orderDetails[orderID].getOrderDate());          
              currentItem = orderDetails[orderID].getMaxItems();
              orderDetails[orderID].getInnerCustOrdObj();
              System.err.println("currentItem" + currentItem);
              //getInnerFieldText(currentItem);
              GrandTotTxt.setText(Float.toString(orderDetails[orderID].getGrandTotal()));
         public void getInnerFieldText(int currentItem){
              ItemNumberTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getItemNumber()));
              UnitPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getUnitPrice()));
              QuantityReqTxt.setText(Integer.toString(innerCustOrdObj[currentItem].getQuantityRequired()));
              TotPriceTxt.setText(Float.toString(innerCustOrdObj[currentItem].getTotalPrice()));
         public void writeOrder(){//TODO
              try {
                   objOut = new ObjectOutputStream(new FileOutputStream(OrderDetailsFile));
                   objOut.writeObject(orderDetails);
                   System.out.println("WORKING!");
                   objOut.flush();
                   objOut.close();
              } catch (IOException e) {
                   e.printStackTrace();
         public Object readOrder(){
              Object temporaryObj;
              try{
                   objIn = new ObjectInputStream(new FileInputStream(OrderDetailsFile));
                   temporaryObj = objIn.readObject();               
                   CustOrdObject[] blah = (CustOrdObject[]) temporaryObj;
                   /*               System.out.println("Outer: "+blah[1].getCustID());
                   InnerCustOrdObject[] whee = blah[1].getInnerCustOrdObj();
                   System.out.println("Inner: "+whee[1].getItemNumber());*/
                   objIn.close();
                   System.out.println("Read Worky!");
                   return temporaryObj;
              }catch(Exception e){
                   e.printStackTrace();
                   System.out.println("Read No Worky!");
                   return null;
         public void writeRecordNumber(int MaxRecord){
              try{
                   objOut = new ObjectOutputStream(new FileOutputStream(OrdRecordNumStore));
                   objOut.writeObject(MaxRecord);
                   System.out.println("WORKING!");
                   objOut.flush();
                   objOut.close();
              }catch(Exception e){e.printStackTrace();}
         public int readRecordNumber() {
              try {
                   objIn = new ObjectInputStream(new FileInputStream(OrdRecordNumStore));
                   int temporaryObj = Integer.parseInt(objIn.readObject().toString());
                   objIn.close();
                   System.out.println("Read Number Worky!");
                   return temporaryObj;
              } catch (Exception e) {
                   e.printStackTrace();
                   System.out.println("Read Number No Worky!");
                   return -1;
    }Message was edited by:
    Kilik07

  • Problem with filePathSeperator and /

    Problem with fileSeperatorChar and /. When I use fileSeperatorChar (to lacate a folder), the path is specified wrong. I want my program to run on different OS, so I need this to work.
    If I do this:
    JLabel label = new JLabel("", new ImageIcon("Images/label.gif");
    //or something like that it works. Will this give me multiple platform support?
    But when I try:
    JLabel label = new JLabel("", new ImageIcon("Images" + filePathSeperatorChar + "label.gif");
    //or something like that They all compile, but I took this off the top of my head. Anyway, when I print out the path for the second technuige, the path reads like this:
    Images;label.gif

    You used filePathSeparator. On Windows you use a semicolon to separate the components of a path, which is a list of directories or jar files, which is why you are getting a semicolon. You want the system property "file.separator" instead. Or use the variable File.separatorChar.

  • I'm having a problem with coreaudiotoolbox and corevideo.dll.

    I'm having a problem with coreaudiotoolbox and corevideo.dll. PC was corrupted, I restored. Now when I launch Safari, I run into errors, can't find these two dll files. Itunes won't download at all because it says something is missing but won't say what. Now what do I do? Apple won't help because they want $50 dollars just to talk with me and I've been down that road before and to no satisfaction. Help please!!

    Taken at face value, you're having trouble with Apple Application Support program files there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept, so an AAS problem can affect both iTunes and Safari.)
    Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post (although it's for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

  • Problem with PremiereProCS5 and AfterEffectsCS5 Dinamic Link!

    Problem with PremiereProCS5 and AfterEffectsCS5 Dinamic Link!
    I installed PremiereProCS4, and after, "Adobe Master Collection Suite CS5" in Italian Language, with PremiereProCS5 and AfterEffectsCS5 on OS Windows7x64Bit.
    I made a first composition with AfterEffects, from PremierePro by choosing "Adobe Dinamic Link">"Replace with AE Composition".
    After that, I made another second version of the same project, directly with AfterEffects.
    I want replace this AE version with existing version, in PremierePro.
    Thus, I selected "Adobe Dinamic Link">"Import AE Composition".
    1) But, the problem is that the new, fresh AE composition is not found!
    The Dinamic Link, in PremierePro, doesn't refresh the window where it is located the new AE Composition called "n°2" made last with AE, (not with DynamicLink)!
    There are available 3 files, that I made, but all the files display only the old composition called "n°1", made with DynamicLink, and with "Replace with AE Composition" command!
    The composition made with AE directly, is not displayed!
    Why?
    In fact, I tried to right click the clip, in PremiereProCS5 timeline, choosed "Replace with Clip">"From Folder" and selected the last imported AE composition: the composition is allways the OLD file made with DynamicLink, not the file made directly with AE!
    Why?
    Help!
    Horsepower0171.

    "...or if you must use multiple projects, start each one from scratch instead of duplicating and renaming..."
    Yes!
    I made from scratch these new projects with AECS5, called:
         "Montaggio_02_CS5_04_Franzi_AECS5 - Composizione collegata 02.avi" and
         "Montaggio_02_CS5_04_Franzi_AECS5 - Composizione collegata 03.avi",
    not renamed, nor duplicated.
    -But PremierePro and DynamicLink doesn't display those in the window!

  • Problem with Java and Windows (Mainly Vista and UAC)

    Hi all,
    I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
    I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
    During the process I have noticed that there are several key problem with java for this type of application!
    The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
    <code>
    cd PATH TO PROGRAM
    start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
    pause;
    </code>
    Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
    The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
    On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
    Has anyone else had this probem and has a suitable solution?
    Any advice on these issues would realy be appricated.
    Regards
    Joey

    Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
    A link to the site I got it was
    http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
    This program allows you start java with a UAC dialog for high access using
    Elevate java -jar myjar.jar
    This then allows you to have full access using java... I guess it could be dangerous but it does the job.

  • Problems with RAC and XA: Fallback

    Hello,
    we are seing problems with RAC and XA (Tuxedo 11, DB 11.2), specifically encountering "ORA-24798: cannot resume the distributed transaction branch on another instance".
    The first scenario relates to fallback after a RAC node failure. There are two servers, S1 and S2. S1 makes an ATMI call to S2. Both servers are in the same Tuxedo group, using TMS_ORA. RAC is set up for failover (BASIC), no load balancing.
    The sequence is:
    - S1 and S2 are connected to the same RAC node n1. All is well.
    - RAC node n1 fails. S1, S2 and the TMS_ORA all fail over to RAC node n2. After the failover has happened, all is well.
    - RAC node n1 recovers. All is still well (as there is no automatic fallback).
    - S1 (or S2) is restarted (either intentionally or because of a crash). Since n1 is up again, S1 connects to n1. Now we get ORA-24798. Permanently.
    S1 is connected to n1 and S2 is connected to n2. Since both are in the same group, both use the same XA transaction branch. When called, S2 attempts to JOIN the transaction branch that S1 started. But the DB (11.2) does not allow the same branch to span more than one node. Hence the ORA-24798.
    This seems to be a severe limitation in the combination of Tuxedo, XA and RAC. It basically means we still have to use DTP services, even with Tuxedo 11 and DB 11.2. Or are we missing something?
    We could put S1 and S2 into different groups, but that seems to be inefficient, and not practical for a real application (10s of servers).
    I am extrapolating from this that RAC load balancing would also not work, as S1 and S2 could be connected to different RAC nodes.
    Roger

    Roger,
    When using an external transaction manager such as Tuxedo you should still declare Oracle services as DTP services when using Oracle Database 11g. The Tuxedo documentation is not clear about this. The relevant 11gR2 RAC documentation is at http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/hafeats.htm and states
    "An XA transaction can span Oracle RAC instances by default, allowing any application that uses the Oracle XA library to take full advantage of the Oracle RAC environment to enhance the availability and scalability of the application.
    "GTXn background processes support global (XA) transactions in an Oracle RAC environment. The GLOBAL_TXN_PROCESSES initialization parameter, which is set to 1 by default, specifies the initial number of GTXn background processes for each Oracle RAC instance. Use the default value for this parameter clusterwide to allow distributed transactions to span multiple Oracle RAC instances. Using the default value allows the units of work performed across these Oracle RAC instances to share resources and act as a single transaction (that is, the units of work are tightly coupled). It also allows 2PC requests to be sent to any node in the cluster.
    "Before Release 11.1, the way to achieve tight coupling in Oracle RAC was to use Distributed Transaction Processing (DTP) services, that is, services whose cardinality (one) ensured that all tightly-coupled branches landed on the same instance—regardless of whether load balancing was enabled. Tightly coupled XA transactions no longer require the special type of singleton services to be deployed on Oracle RAC databases if the XA application does not join or resume XA transaction branches. XA transactions are transparently supported on Oracle RAC databases with any type of service configuration.
    A"n external transaction manager, such as Oracle Services for Microsoft Transaction Server (OraMTS), coordinates DTP/XA transactions. However, an internal Oracle transaction manager coordinates distributed SQL transactions. Both DTP/XA and distributed SQL transactions must use the DTP service in Oracle RAC."
    This issue came up earlier this year in another newsgroup thread at https://forums.oracle.com/forums/thread.jspa?threadID=2165803
    Regards,
    Ed

  • Having problems with OSX and mail with the servers?

    Having problems with OSX and the mail servers?  Seems to be happening more and more?

    Hello,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
    You may have multiple entries.
    Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter
    The Password rejection can confuse people since it's a catch all meaning...
    This Password, Username, Authentication method... is not recognized on this Port to this Server, more than one entry in Keychain for each in/out entry, or a server end problem.
    If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
    The receiving email ports are:
    IMAP is port 143
    IMAP-SSL is port 993
    POP is port 110
    POP-SSL is port 995
    Outgoing ports are...
    SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

Maybe you are looking for