Problem with ODI 11g (Extension/Modeler issue)
After installing ODI and running ODI Studio, I did not get the Connect to Repository window in the left. Extension log says: Error: Not Loaded: Missing dependencies: oracle.modeler
Seems like its a missing extension, can anyone help me with this issue? Thanks
Yes AyushGaneriwal,
the problem was non printable characters in the last field of 2000 character arriving from Mainframe download, now i asked for a clean file and is working good.
Thank you.
B.
Similar Messages
-
MSSQLServer jdbc connect problem on ODI 11G R2
I have a MS SQL Server jdbc connect problem on ODI 11G R2 / Windows server 2008 64 bits.
Tried, one by one, all versions of Microsoft drivers.
Sqljdbc4.jar copied to : %appdata%\odi\oracledi\userlib\
The Topology connect syntax is :
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL : jdbc:sqlserver://<host>:1433
=> All the topology tests end with time-outs.
Installed 10G ODI.
Works with 1.4 java and sqljdbc.jar version 2 jdbc driver.
Times out with version 3 and/or Sqljdbc4.jar + JAVA_HOME & ODI_JAVA_HOME set to 1.6 path.
also tried, with no success (time-outs) on either 10g or 11g :
com.inet.tds.TdsDriver
jdbc:inetdae7://<host>:1433?database=<DB>
same results for :
net.sourceforge.jtds.jdbc.Driver
jdbc:jtds:sqlserver://<host>:1433
Any suggestions for a fix?
Many thanks in advance.Hello,
ODI (11g) Studio is certified on Windows 32 bit only, not on 64bit.
However you may still install it and configure ODI Studio to run with a 32 bit java.
Details pls see Master Note For ODI 11g Install Issues And Questions (Doc ID 1214428.1).
To connect to SQL Server:
# Check and make sure the authentication mode of your Microsoft SQL Server Server is set to "SQL Server and Windows" or "Mixed", otherwise Oracle Data Integrator (ODI) is unable to connect to the database.
# Before you create the Oracle Data Integrator (ODI) Dataserver in Topology Manager > Physical Architecture, stop all ODI processes, and place the JDBC Driver file in the ODI's userlib and "/drivers" folder.
For ODI Studio (Local No Agent)
%APPDATA%\odi\oracledi\userlib
%APPDATA% is the Windows Application Data directory for the user (usually C:\Documents and Settings\<user>\Application Data).
Standalone Agent
ODI_HOME\oracledi\agent\drivers
Note: If you decide to use the DataDirect driver that comes with ODI 11g install/ embedded in ODI 11g
weblogic.jdbc.sqlserver.SQLServerDriver
Then you don't need to worry about this step.
# Make sure that the database is the default database of the user account employed by ODI for connection, and that the password is correct.
# Verify (in your Microsoft SQL Server Server network configuration) that TCP/IP has been enabled on port 1433.
For more details see How To Set Up JDBC Driver Connections For The Microsoft SQL Server For ODI (Doc ID 423914.1)
If you try sqljdbc.jar, you need to configure ODI_JAVA_HOME to jdk1.5
sqljdbc4.jar, jdk1.6 (since ODI 11g requires jdk1.6, I'd suggest sqljdbc4.jar)
More see Compatibility Matrix For Java Machines And JDBC Drivers Used With ODI (Doc ID 807235.1)
Hope that helps other people who run into this,
Edited by: user742480 on Apr 4, 2011 12:06 PM -
Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition
Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh MenonSaqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot -
Unable to install the Demonstration Environment with ODI 11g
Hi,
Can someone please help me with Demonstration environment installation with ODI 11g on a windows system.
I have downloaded the zipped file from the OTN site.
I am unable to understand the installation steps in the user guide.Posting them for your reference.
"To manually install the Demonstration environment, do the following:
Unzip oracledi-demo.zip in the ODI_HOME folder.
Verify that the JAVA_HOME environment variable is set and contains the path of a JVM suitable for Oracle Data Integrator.
If this variable is not set correctly, set it to a valid java machine location.
For example:
On UNIX operating systems:
setenv JAVA_HOME/usr/local/java
On Windows operating systems:
Set the JAVA_HOME variable graphically "
Regards,
Lovey SaxenaHi;
Did you try to start installation? Your Java_Home could be avaliable on your env settings, so you dont need to set this for installation. If its fails please try to use this syntax:
Set JAVA_HOME=C:\xxx
Regard
Helios -
Issue with ODI 11g and Fixed width files
Hi to everyone,
i've got a problem with a flat file with fixed length fields. I delcared all correctly(it seems) and in the data preview i see the correct data, unfortunatly when i lounch my interface execution i receive an error telling that the dimension of the last filed is more than the declared one. It looks like he is not able to understand the end of the record that is the normale "0D0A".
And i have also another question, anyone knows why inside my ODI Desiner i see always the same file also if i try to change the data inside? Is it a problem of release or some bug? Have i forgot to configure something in some place?
Thank you in advance.
B.Yes AyushGaneriwal,
the problem was non printable characters in the last field of 2000 character arriving from Mainframe download, now i asked for a clean file and is working good.
Thank you.
B. -
Problems with Oracle 11g on Win2008 server
Hi all,
we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
Since yesterday we have problems with the database. On monday we had no problems.
The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
here the tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
IFILE=M:\TNSNAMES\tnsnames.ora
ORACLE.MEKRA.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
(CONNECT_DATA =
(SID = qsys)
Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.
After 15 minutes diagnostics we stopped and started the db.
The PCs got after the restart a connection.
On the clients is the oracle client 10g installed, but I think thats not the problem.
I don't know whats the problem can be.
I hope you can help me or have some idea's?
The TNSnames.ora on the server:
# tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORALB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oralb1.mekra.net)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
One of them we deleted.
The dns should be not a problem now.
an idea? I hope so....
thanks for reading.
bye852138 wrote:
Hi all,
we changed our database 10g on W2K3 to 11g with Win 2008 server on weekend
Since yesterday we have problems with the database. On monday we had no problems.
The problems begun on tuesday. The assemly lines are connecting to the server with a tnsnames.ora, who placed on a networkshare.
here the tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\Oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
IFILE=M:\TNSNAMES\tnsnames.ora
ORACLE.MEKRA.NET =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = caq01)(PORT = 1521))
(CONNECT_DATA =
(SID = qsys)
Every PC on the assembly lines has this tnsnames.ora and a connection to the mapping M:
Today we had already the same problem. Some PCs got a connection to the DB and some got suddenly no connection.There must be some clue .. a tns error message ...
>
After 15 minutes diagnostics we stopped and started the db.
The PCs got after the restart a connection.
On the clients is the oracle client 10g installed, but I think thats not the problem.
I don't know whats the problem can be.
I hope you can help me or have some idea's?
The TNSnames.ora on the server:tnsnames is used only by client processes. When you say "on the server" are you talking about the one pointed to by the IFILE in the local tnsnames shown above? If not, if this just happens to be the tnsnames on the database server, then it has no bearing on your problem.
# tnsnames.ora Network Configuration File: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORALB1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.188)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oralb1.mekra.net)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
The first problem we solved yesterday, we had two oralb1 entrences in the dns as static.
One of them we deleted.
The dns should be not a problem now.
an idea? I hope so....
At a previous employer we used a shared tnsnames file. It was not on the db server but on a file server, specifically for shareing. Occasionally there would be an issue with the network connection to that file server, or our dimwit SA would change the sharing permissions. Of course he claimed there was no issue on his end and I had to take my own network traces to prove it was.
thanks for reading.
bye -
Hi all,
I have problem with Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86-64 (64-bit) downloaded archives.
Actually with GridControl_11.1.0.1.0_Linux_x86-64_2of3.zip (1,589,671,704 bytes) (cksum - 535544209)
I successfully downloaded all archives but cksum for this file (...2of3...) is invalid.
Even it is invalid I tried to install. Installation starts ok, but it breaks after few moments.
RegardsHere is cksum from file that I downloaded 3966614633 and on download page is 535544209.
It's obvious that something is wrong!
Oracle personal should fix this issue.
Anyhow, there is another way... Download from different location. See this thread:
Re: Invalid Software Download from OTN for Grid Control 11g on Linux x86_64
Regards -
Problems with specifying File Extension of E-Mail attachment
Hi everybody
I have a problem that seems to be so simple that it almost drives me crazy that I cannot find a solution for it.
I need to send the content of an internal table (some lines) as a mail attachment to a specified mail address.
The format should be normal ASCII, so when I open it with any text editor (e.g. Notepad), I want to have all my lines there (including CR/LF).
The problem now is - The extension of this mail attachment must be ".key", so the attached file should have the name "L_12345.key" (for example).
For E-Mailing I use FM "SO_NEW_DOCUMENT_ATT_SEND_API1".
This part works fine, also the attachment part works in general. (I receive the mail and I receive the attachment).
BUT I get either an attachment with the name "L_12345.txt" or "L_12345.key.txt" and in correct format, or I get an attachment "L_12345.key", where the name is correct but format is wrong (no CR/LF - everything in one line).
Example:
=======
Attachment-Content should be:
Line 1
Line 2
Line 3
Name of Attachment should be: L_12345.key
What I tried:
TEST 1 **
Declare Attachment in Packing list. ..
ls_packing_list-transf_bin = ' '.
ls_packing_list-head_start = 1.
ls_packing_list-head_num = 0.
ls_packing_list-body_start = 7. "Startline of Attachment
ls_packing_list-body_num = 3. "No of Attachment lines
ls_packing_list-doc_type = 'RAW'.
ls_packing_list-doc_size = 3 * 255.
ls_packing_list-obj_name = 'ATT01'.
ls_packing_list-obj_descr = 'L_12345' "Attachment name
APPEND ls_packing_list TO lt_packing_list.
==> Result: Attachment Filename = L_12345.txt
==> File as I need it (ASCII with CR/LF), but extension wrong
Line 1
Line 2
Line 3
TEST 2 **
Same as TEST 1, but with:
ls_packing_list-obj_descr = 'L_12345.KEY' "Attachment name
==> Result: Attachment Filename = L_12345.KEY.txt
==> File as I need it (ASCII with CR/LF), but extension wrong
Line 1
Line 2
Line 3
TEST 3 **
Declare Attachment in Packing list. ..
ls_packing_list-transf_bin = ' '.
ls_packing_list-head_start = 1.
ls_packing_list-head_num = 0.
ls_packing_list-body_start = 7. "Startline of Attachment
ls_packing_list-body_num = 3. "No of Attachment lines
ls_packing_list-doc_type = 'KEY'.
ls_packing_list-doc_size = 3 * 255.
ls_packing_list-obj_name = 'ATT01'.
ls_packing_list-obj_descr = 'L_12345'. "Attachment name
APPEND ls_packing_list TO lt_packing_list.
==> Result: Attachment Filename = L_12345.KEY
==> File Format is wrong:
Line 1 Line 2 Line3
I have tried several other Extensions (DOC_TYPE), it seems, that the File format is only correct with "RAW", but it seems with "RAW" SAP adds ".txt" as extension to the filename.
Does anyone know how I can achieve having an e-mail attachment with multiple text lines and name "<anyname>.key"
Any help (if possible with example code ?) would be highly appreciated.
Many thanks
Haraldhi,
check the following code.
*& Form send_email
FORM send_email.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: con_cret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
*Body of mail
CLEAR objtxt.
CLEAR objtxt[].
objtxt = 'Dear abc'.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
objtxt = 'Attached herewith is the detail list of materials.'.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
objtxt = 'Regards,'.
APPEND objtxt.
objtxt = 'Admin'.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
*Mail description
CLEAR docdata.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
docdata-obj_name = 'List'.
docdata-obj_descr = 'List of materials'.
docdata-obj_langu = sy-langu.
*Packing list for main document
CLEAR objpack.
CLEAR objpack[].
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
*Attachment data
CLEAR objbin.
CLEAR objbin[].
CONCATENATE
'field1' 'field2' 'field3' 'field4'
INTO objbin SEPARATED BY ','.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
LOOP AT it_material_list INTO wa_material_list.
MOVE-CORRESPONDING wa_material_list TO wa_char_material_list.
CONCATENATE
wa_char_material_list-field1
wa_char_material_list-field2
wa_char_material_list-field3
wa_char_material_list-field4
INTO objbin SEPARATED BY con_tab.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
CLEAR objbin.
CLEAR wa_char_employee_list.
ENDLOOP.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
*Packing list for attachment document
CLEAR objpack.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'. "check these values
objpack-head_start = 1. "check these values
objpack-head_num = 1. "check these values
objpack-body_start = 1. "check these values
objpack-body_num = tab_lines.
objpack-doc_type = 'KEY'.
objpack-obj_name = 'Attachment'.
objpack-obj_descr = 'Report.KEY'.
APPEND objpack.
*Email receiver's list
CLEAR reclist.
CLEAR reclist[].
reclist-receiver = mail_id.
reclist-rec_type = 'U'.
APPEND reclist.
*Function module to send email with an attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "send_email
Edited by: vikram shah on Sep 25, 2008 5:28 PM -
Facing Problem with Adaptive Web Service Model
Hi All,
I am consuming adaptive web servcie model. It is created from a lcoal web service i.e deployes on a web service. When i run from WS navigator it works fine.
When i consume WDJ it is erroring out. The method is written an array of bean methods.
The error i am getting is -- java.lang.IllegalArgumentException: Target role name 'Response' not defined for model class 'SearchInvoiceByNumberResponse'
Please help me, have a very tight delivery....
Thanks
SupriyaHi All,
I did re-imported my model but no help. There are 5 business methods in my EJB. three methods returns integer value and other two methods are selecting the data which returns bean type. One is bean type and another is of bean array type.....
I have problem with only these two...........................these two methods errors out when try to consume through adaptive web servcie model....are there any pre-requsisties i should take care offf.....
Help me out................
Thanks
Supriya. -
Problem with Adaptive Web Service model
Hi All,
I am trying to create a model using Adaptive Webservice.
While I am deploying the application I am getting the following warning message.
I cheked the web serivice throw WSNavigator, It is working properlty.Nov 27, 2008 3:34:56 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[040]Deployment finished with warning
Settings
SDM host : infpu05445
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Result
=> deployed with warning : file:/C:/DOCUME1/286355/LOCALS1/Temp/temp62998testw.ear
Finished with warnings: development component 'testw'/'local'/'LOKAL'/'0.2008.11.27.15.34.48':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/testw and wait. Reason: Clusterwide exception: server ID 12403050:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/testw'' for startup. Reason=Clusterwide exception: Failed to start dependent library ''tc/wd/wslib'' of application ''local/testw''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : Got problems during deployment
Can you all please let me know is the problem with model creatuion or Web Service configuration.
Thanks,
Archana.It seams that the component 'tc/wd/wslib' is not well deployed on your server. You should redeploy it on your server.
-Go to nwds, Development infrastructure perspective
-Expand the FRAMEWORK item, there is the 'tc/wd/wslib' normally
Deploy :
-Open the menu Window > Show view > Other and open the Undeploy View
-In the undeploy view expand the FRAMWORK item and locate the tcwdwslib (it ther is no such application, then go directly to deploy steps after)
-Add the to the undeploy list (+ button)
-Click undeploy (blue button near + button
When it is undeployed, you can redploy it:
-In the Componenet Browser, locate the 'tc/wd/wslib' in the FRAMWORK as befor
-Right-click and click Deploy and click OK
If it not working, try the same (undeploy/dredploy) with 'tc/wd/wslib/api'
Check also that the dependencies of your project should have 'tc/wd/wslib/api' and not tc/wd/wslib/
Hope it will help you
Quentin -
Slow wireless speed with new iMac Intel- problem with 802.11g?
There IS a problem with the new Intel Mac, I have tried both the Intel iMac and the new Intel Mac mini and they both have the same problem with slow wireless speed (or rather it variates, if I do a ping to another computer on the network the speed goes from < 1 ms up to 1000 ms and then down to < 1 ms and so on). The older mac minis, my Linux boxes and my Windows PCs don´t have that problem. I have also read reports on the net and it appears that most users experiencing this problem have wireless card firmware version 101.3 (3.120.28.3) . A possible "fix" is to change to 802.11b on the router and then it works. No speed fluctuations and a stabile network! I know it is a bad solution, I would prefer to use 802.11g and get the speed. However I think this points to a problem with the drivers regarding 802.11g. I am starting up a new thread on this and those of you with problems, please try to switch to 802.11b and if it works let us make Apple aware of this.
/TobbeWhich home hub do you have?
There is some general help at this link Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Problem with MacBook Repair Extension Program for Hard Drive Issues
I have a macbook that would be covered by the program (http://www.apple.com/support/macbook/hd/repairextension/).
Since I bought it Nov 2006, it is not covered by the 3 year extension, but (to me) it looks like it is covered by the sentence +"or until August 15, 2010, whichever provides longer coverage.+"
Apple Italy is currently refusing to apply the coverage, saying that only the 3 years coverage applies.
So why do Apple wrote "whichever provides longer coverage"?
To my laptop, longer coverage means August 15, 2010.
Isn't it?
Help needed! ... and really much appreciated!Nobody from Apple here (at least officially). We're all users just like you. I guess if Apple in Italy doesn't want to replace your hard drive, that's the end of the story. As I mentioned, hard drives are cheap now. The real question is your data on the present hard drive. If the computer still boots, I would strongly suggest you try to backup your data ASAP.
I agree that this issue comes down to "whichever provides longer coverage". However, that aside, I have Apple Care on my MB and it only covers me for 3 years. Since I bought my MB in Nov '07, I'm covered until Nov '10. It doesn't make a lot of sense that you would be covered for a longer period than my Apple Care (which again is 3 years).
Message was edited by: Macaby
Message was edited by: Macaby -
Problems with Oracle 11g XE R2
Hi guys,
I've got a problem and try'n to solve it for abt a week now and tried many solutions.
My enviroment:
Windows 7 Professional SP 1 64-Bit
AMD Phenom II x4 940 @3.0 GH
4 GB RAM (In Usage while installing 40%)
Windows-Firewall is activated (but oracle.exe and lstnr.exe are configured as exception)
avast! Free Antivirus Version 2014.9.0.2018
Installation (both times with same outcome):
Installed O 11g XE 64-Bit in two different ways:
User I was logged in with is in Admingroup
Started installation via rightclick with administrationprivileges
I activated the administrators account and logged in with adminprivileges.
After that I've installed the 11g XE 64 bit
between both steps I cleaned everything up and restarted my system, registry was empty too and folder was deleted manually
at first I get this problem: Windows cannot find "http://127.0.0.1:%HTTPPORT%/apex/f?p=4950"
-> Manually changing %HTTPORT% to 8080
--> now I could doubleclick the shortcut, Firefox/IE/Chrome opens but 404 not Found-Error is returned
- OracleServiceXE, XracleXETNListener both are running
[code]
C:\Windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 04-NOV-2014 18:02
:56
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=D³rsinKurt-PC)(PORT=1521
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 04-NOV-2014 13:53:50
Uptime 0 days 4 hr. 9 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\D³rsinKurt-PC\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=D³rsinKurt-PC)(PORT=1521)))
The listener supports no services
The command completed successfully
[/code]
so Listenerservice is up and running but I cant find the http 8080-Service with netstat -a
so I started investigating a bit more:
Registryfolder: HK_LOCAL_MACHINE\SOFTWARE\ORACLE is installed
following subdirectories are installed: KEY_XE, ODP.NET, OracleMTSRecoveryService
What I tried (both ways, starting with and without adminstrationprivileges):
I created two new DWORD-Values in KEY_XE ORACLE_SID_AUTOSTART and -SHUTDOWN both with the value True and stopped and started the services, nothing changes.
Inserted both users (Administrator and normal User) in ORA_DBA-Group, nothing changes, even tried to turn it off and on again
wanted to connect to sqlplus via console:
C:\Windows\system32>sqlplus system
SQL*Plus: Release 11.2.0.2.0 Production on Di Nov 4 18:09:21 2014
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name:
when I start the sqlplus-prompt directly and write the command startup I get the following msg: ORA-01031: insufficient privileges
I looked into the ORA_BASE-Folder and looked at the oradat folder, it contains a XE-Folder which is empty, the admin-folder contains: XE/ and adump, dpdump and pfile, all three are empty (what does this mean? No DB at all created?)
I watched the ORA_HOME-Folder and found initXE.ora, oradba.exe, oradim and PWDXE.ora
I looked into the oradim.txt-Log:
Tue Nov 04 11:21:17 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe -shutdown -sid xe -usrpwd * -shutmode immediate -log oradim.log
Tue Nov 04 11:21:55 2014
ORA-01012: not logged on
Tue Nov 04 11:23:01 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe -startup -sid xe -usrpwd * -log oradim.log -nocheck 0
Tue Nov 04 11:23:38 2014
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) Das System kann die angegebene Datei nicht finden.
--> bingo, 1st Issue: there is no spfileXE.ora, how can I create this? plus in the dbs-folder there is only a init.ora and no initXE.ora?
Looked into the log-Folder 5 files starting with clscX.txt (probably after every systemreboot? containing the following:
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2014-11-04 13:53:52.197: [ default][5576]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][5576]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system couldn't find the file.
-> Systemlanguage is german, so I've translated the german parts, maybe there was smth lost in translation
--> 2nd Issue: Is there any regkey missing?
further I watched the folder ORACLE_HOME /server/config/home cloesly:
cloneDBCreation:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-01031: insufficient privileges
CloneRmanRestore:
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora";
ORA-01031: insufficient privileges
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL> set echo off;
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ERROR:
ORA-01031: insufficient privileges
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
PostDBCreation:
QL> connect "SYS"/"********" as SYSDBA
ERROR:
ORA-01031: insufficient privileges
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\fast_recovery_area';
SP2-0103: Nothing in SQL buffer to run.
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01031: insufficient privileges
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: unable to open file "C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql"
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmsclr.plb;
SQL> DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: Not connected
SQL> CREATE PUBLIC DATABASE LINK DBMS_CLRDBLINK USING 'ORACLR_CONNECTION_DATA';
SP2-0640: Not connected
SQL> CREATE OR REPLACE LIBRARY ORACLECLR_LIB wrapped
2 a000000
3 1
4 abcd
5 abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11 abcd
12 abcd
13 abcd
14 abcd
15 abcd
16 abcd
17 abcd
18 abcd
19 16
20 51 8d
21 L/XXXXXXXXXX...
22 XXXXXXX...
23
24 /
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRParamTable;
SP2-0640: Not connected
SQL> DROP TYPE DBMS_CLRType;
SP2-0640: Not connected
SQL> CREATE OR REPLACE TYPE DBMS_CLRType wrapped
XE :
Instance created.
So hopefully thats enough Information
thank you in advance
Dürsin KurtOK guys I've found it out:
Problem was, the XE.bat-Script couldn't add me to the ORA_DBA-Group.
Reason: my Computername and my username, both had a vowel mutation "ü".
Reason it didn't work at my business-laptop too, both have my "Ü" in the username
solved! -
Hi Guys,
I have an issue when i logon to BI 11g Admin tool in online mode trying to open the repository.The error that is popping out is below
*[nQSerror: 73006] cannot obtain oracle BI servers from either the primary cluster controller (FTLDSBLSDBX02.xyx.net:9706) or the secondary cluster controller (:)*
specified for the clustered DSN
i have checked these 2 links but of no luck. If anyone has faced such issue and solved it please provide me the same.
Re: BI 11g sign in problem
debashish link on this issue.
Any help is greatly appreciated. Looking forward for the right solution.
TIA,
KKthanks for the prompt reply deepak.
i will do looked into it, but anyways i will giv a try at trying to open sample rpd.
If you find any other work around suggest me,it would be of great help
UPDATED POST
@dpka & deepak - I have looked into your comments as suggested but with no success i dint find any error as they are good enuf.Any more ideas.
Anyways im doing a trial and error method to solve this issue.
Regards,
kk
Edited by: Kranthi.K on Aug 23, 2011 8:52 PM -
Problems with JDev 11g using JBOSS and ANT
Hi,
I'm trying to migrate to JDev 11g with JBoss ( version 7.X ) as the AppServer
With JDev 10g all works fine with JBoss, even the Remote Debug, all OK
here is the problems I have :
1) ANT
JDev doesn't save my ANT settings
every time I launch ANT : Run Ant Target - I must set the Advance settings
JDev 10g I only need to do that once, the settings are saved but not in the 11g, why ?
2) persistence
I get this error when deploying to JBoss
16:34:50,967 INFO [org.jboss.as.server] (HttpManagementService-threads - 1) JBA
S015870: Deploy of deployment "prod_v0.0.1_iDigital.menu.ear" was rolled back wi
th failure message {"JBAS014771: Services with missing/unavailable dependencies"
=> ["jboss.persistenceunit.\"prod_v0.0.1_iDigital.menu.ear/iDigital.menu-WebApp
.war#InfraModel\"jboss.naming.context.java.jdbc.stdDSMissing[jboss.persistenceun
it.\"prod_v0.0.1_iDigital.menu.ear/iDigital.menu-WebApp.war#InfraModel\"jboss.na
ming.context.java.jdbc.stdDS]","jboss.persistenceunit.\"prod_v0.0.1_iDigital.men
u.ear#InfraModel\"jboss.naming.context.java.jdbc.stdDSMissing[jboss.persistenceu
nit.\"prod_v0.0.1_iDigital.menu.ear#InfraModel\"jboss.naming.context.java.jdbc.s
tdDS]"]}
it seems that is something related to dependencies not well configured during build stage of the EAR, but with 10g works fine
BTW, I can't run my project with WebLogic either, gives this error :
<5/Abr/2013 18H27m BST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1365182860563' for task '0'. Error is: 'weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].'
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
Truncated. see log file for complete stacktrace
>
<5/Abr/2013 18H27m BST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'iDigital.menu'.>
<5/Abr/2013 18H27m BST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
Truncated. see log file for complete stacktrace
can someone give me a clue ?
thanks
Edited by: FernandoLeite on Apr 5, 2013 10:31 AMI can't say many about the ant stuff, but have you tried to put the parameters in a property file and use this to get the parameters to ant?
The reason you can't run the application on WLS is that you have not installed the adf runtime on your wls. The error 'application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].' points to this.
Timo
Maybe you are looking for
-
I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print
Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired
-
My husbands iPhone 5 has a shadow up the screen how do I clear it?
I Have a iPhone 5 on IOS 7.1.2 and it has developed a long shadow down the screen today on all screens but it is not as obvious on the home screen. how can I clear it?
-
After update, opens all previously opened pdfs
This happens on both XP and Vista with Reader 9. After doing an automatic online update of Reader, then next time Reader is opened, it tries to open all previously opened PDFs. Of course this slams the machine while Reader is trying to open all of th
-
Hi From COEP table Im trying to retrieve data from fields WTGBTR , OBJNR , KSTAR , VRGNG . But the problem is if the value in the field WTGBTR is repeated for a particular OBJNR and KSTAR Im not getting those values to the internal table . Why?
-
The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?