Problem with offset settings CS5

I have got a large indesign CS5 (Win) document with many photos linked (all in RGB).
How should I prepare pdf for offset?
I am not sure the RGB-> CMYK conversion. If I can used conversion from Indesign which settings shoudl I choose.
I tried Pdf/X-1a 2001 but I am not sure about quality of phaotos and conversion RGB-> CMYK, apart of this text in
such a pdf is not sharp, seems pixelised.
Could you help me to solve this problem?
Is there any difference between external RGB->CMYK conversion with photoshop and those automatic from Indesign?offset, pdf
Please help

If I make a page with a frame filled with a color where it's easy to spot a conversion—something like 0/0/10/50—and export it as PDF/X-1a, AcrobatX's preflight tells me the profile is DeviceCMYK not the Fogra27 Output Intent Profile I exported.
If I open Acrobat's Output Preview, the default Simulation Profile is the output intent profile and the gray shows the same 0/0/10/50 separation as in ID. If I change the Simulation Profile to US Sheetfed the separation panel does not show a conversion—I still get 0/0/10/50.
If I print separations to the different destination profiles the results match the Output Preview, in both cases the cyan and magenta plates are blank. I don't see anyway to force a CMYK-to-CMYK conversion from the Print dialog.
If I export the page again and include a destination profile rather than an output intent (by setting the Standard to None) I get very different results.
Preflight shows Fogra as the profile. In this case the Output Preview simulation defaults to my Acrobat working CMYK space and I get a conversion (because it is not Fogra). If I select Fogra as the simulation there's no conversion, which is what I expect. Again my printed separations match the simulations—by default I get a CMYK-to-CMYK conversion.

Similar Messages

Problem with offset values

Hi Experts,
I have a problem with offset values. I have create a variable on OFISCPER, it's characteristic value, indivdual value, mandatory and ready for the input. I need to show the varibel period and the l previous period and so on till 12 periods. I used the offset values (-1, -2, etc.) but when I execute the query I can show just the variable period and the period previous I don`t see. The query is based on multiprovider and don´t has filters. Can anyone help me?

Leonel,
You may nt need to have 12 columns in the query designer.
You could include the keyfigure and restrict it to the variable and create the offset for the 12 periods
Check this http://help.sap.com/saphelp_nw04/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
-Doodle

Problem with Mail settings - PDF document is not sending

Hi Experts,
During sales order confirmation, a PDF attachment used to be sent.
But now the customer is receiving the file with extension as .OTF instead of .PDF.
Where could be the problem with this? Is this something wrong in SOCT setttings?
But for some other scenarios, the same is working so i don't think that there is a problem with SCOT settings.
Please let me know if anybody has an idea about this problem or susgestion to find the problem
Regards,
Vijay

Hi Gangisetty,
I guess there is no need to change any settings.
You just need to change format from OTF to PDF using some FM.
You can refer following links for conversion of OTF to PDF.
Re: sending INVOICE as attachment in PDF for external Mail address
FM to send an email with a PDF attachment
http://an-abaper.blogspot.com/2009/07/sending-smartform-as-pdf-through-mail.html
Hope this will help you.
Regards,
Vivek

Problem with offset length

Hi,
i have a problem with offset length please see below code and suggest :
data: content_new LIKE soli-line. "It has a length of 255 charecter
content_new = 'MTE:SD0\nwssd01_SD0_00\CPU\CPU_Utilization'.
content_new = content_new+4(251).
it is giving result:
content_new = SD0\nwssd01_SD0_00\CPU\CPU_Utiliza "it is removing last 4 charecter of UTILIZATION also
while i need :
content_new = 'SD0\nwssd01_SD0_00\CPU\CPU_Utilization'.
can anyone plz help me?
regards.
Moderator Message: Duplicate Post.
Edited by: kishan P on Oct 28, 2010 9:44 AM

You can find string length first. Subtract length by 4, Then use like new = str+4(len), use condense if required.

TS3899 iPad mail account says problem with 'ssl settings' - can you help me?

iPad mail account says problem with 'ssl settings' - can you help me?

The 4Gs hardware, only 256 MB of RAM, prohibits updating beyond 6.1.6.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Problem With Brushes Pressure CS5

Hello all.
I'm using a Photoshop Cs5 with a Wacom Cintiq 12wx Tablet (I'm using PC with WinXP).
I'm having some problems withe the pressure, it doesn't work on Photoshop, (I tried it on CS3 & CS5), and I did clicked on the Tablet options in PS.
The pressure just don't responds.
I Think its becuse I can't change the Minimum Diameter in any Brush.
Plus when I change the Control part to Pen Pressure, a little warning sign is appering ( a triangel with an exclamation mark insaid ), how ever when I click on it [to see what the problem is ,nothing happens].
I have to point out that in the Cintiq Tablet Properties it's all fine, the pressure respond(in the meter)
I tried making a different settings for Photoshop, it didn't help. Can any one Pleas help me?

Usually, this is an issue with the wacom driver needing to be updated.
A few people have also found that the Windows tablet settings can also mess things up.

Problem with Zoom in CS5

Hi, I've been having a problem with the zoom in CS5. I've looked around the web for a solution but no luck.
Basically when I zoom out the image becomes pixelated unless its at 50% zoom. The same image with the exact same zoom will look absolutely fine in CS4.
Example:
http://img691.imageshack.us/img691/3761/46991735.jpg

People sometimes report that the OpenGL based zoom in Photoshop CS5 makes their images seem soft. Your observation seems to be the opposite.
It sounds as if you're not actually getting font rendering in OpenGL, and maybe you need to update your video drivers (or maybe your video card just won't do that function).
Are you seeing the same behavior if you change the Advanced settings for OpenGL in Edit - Preferences - Performance? FYI, I just tried it and I see the same jaggies on huge fonts reduced to 66.67% with OpenGL off, which is to be expected.
However, with OpenGL on, I see this:
-Noel

Export Release Build - Problem with Server Settings

Hello, i have a big problem and i searched the whole day yesterday but didnt found an answer...
I started a Flex Mobile and PHP Project. The Project has a Data/Services included wich loads some customer from a database (sql)... for the first a
used Zend and try it local (http://localhost and used the htdocs Folder of Zend)... EVERYTHING WORKS PRETTY FINE... so NOW my problem
I wanted to export this project to a release build for my android phone... so the first warning of Flash Builder ist that the project ist currently configured to access data services from a local url. Before exporting the application, you may need to deploy your services to a remote server, then change the server root URL for your project. Click here to change server settings.
When i click the button i get the server setting.
Web root: C:\Program Files (x86)\Zend\Apache2\htdocs
Root URL: http://localhost
whe i change it now i get an eror:"The selected web root folder does not exist (i attached i screenshot of it).
i entered de domain of my server (i also tried the ip) at Root URL. And i think there ist a problem with the Web root...? i get scary

i know WHY Flashbuilder tells me that i have to change the setting when i deploy on the device
my problem ist that i got this error...
and the domain wich i have in the screenshot should only explain how i tried it...
i entered my server url (the real domain) and i entered the folder "app" wich i have created via ftp on my server...
BUT i also get this error (lik in the screenshot)
i think at ROOT URL i cant make lot mistakes .... http://myserver.de or the ip
but i think maybe my web root ist incorrect? i entered here the folder wich is directliy on my server...?
i dont know exactly but i got an error like in the screen

Problem with Pen Tool CS5

Hi,
I just got Photoshop CS5 and I'm having a bit of trouble with the pen tool - namely, I can't see the path I'm creating. In CS3 I could clearly see the line between two points but in the new program the line is nearly invisible making it very difficult to create the path. Is this a setting I can fix?
thanks

I was having 32 bit while I upgraded from CS3 to CS4. The only problem with CS4 that time was with pen tool.Though I cannot precisely recall , I can say it t was very lazy and very frustrating and this was resolved totally after shifting to 64 bit.--If urs existing system is 32 bit try with 64 bit

Problem with reset in cs5

with ctrl alt shift to reset, i noticed this created problem with normal setup.
things i noticed are that you can't open new file, it returns error message and you have to go to prefence and off open gl drawing to fix them.
and other thing if the mask black/white erasing doesn't work so well.
seems the hardness for brushes whether its 100 or 25, looks the same, i don't remember seeing this before in cs5, should reflect strenght between stronger /weaker erasing.

things i noticed are that you can't open new file, it returns error message and you have to go to prefence and off open gl drawing to fix them.
That just means that your video card driver has some bugs, and needs to be updated.
The error messages tell you that there is a problem with your video card driver.

Problem with MathType and CS5 due to InDesign

We publish Math and Science curriculum and we run into the problem below.
the second bullets is imported wrong in CS5. Is there a work around? (I also emailed Design Science). We'd rather use CS5 since all our other subjects are done in CS5 and we want to be able to use spanning across columns which does not exist in CS4.
The same happens when using MT Extra instead of Euclid Extra.

BTW, Jongware, I was a bit unfair about the fonts. You can sign up for the 30-day free trial of Mathtype and then you get the fonts. Furthermore, the strong implication is that you need not delete them after the trial period is over, and therefore you also can extract them from the installer for use like this with no compunctions (which is what I did). Source: MathType: Font Installers.
redesign: Moving right along, just like Jongware, when I open your CS4 document in CS4, I see the same behavior Jongware saw and the same behavior you saw in CS5 (which I also see in CS5), namely the goofy circle glyph (seems to be GID 64 and U+F069):
I did have to turn on high-resolution previews, though otherwise I got something else entirely.
I notice, however, that you seem to have authored this file using some 3rd party plugins:
Since that seems to be a math-related plugin, it doesn't seem inconceivable that it is part of the issue.
I suggest you disable it and re-test in CS4.
The font does seem a bit goofy...The goofy circle glyph appears in FontForge, as a ccwcontourcircle, but not in
standard Mac font apps, like TextEdit. It's also the 'i' position in the font.
I don't know enough about fonts to dig and really figure out why you get one character when it is first and another when it is second, but I really don't think this is InDesign. Oh, right, let's look at the EPS file in another program...
Curiously, Preview.app indeed shows the bullet glyph in the first position (and in the second).
Adobe Illustrator, which I opened by accident (ha!), shows ccwcontourcircles.
So it seems that Apple and Adobe's EPS renderers treat this font differently.
I suppose it might be an Adobe bug, but I'm more inclined to suspect its ambiguous... The way the ccwcontourcircle is encoded seems strange to me.
Well, I think that's enough for me. Basically, Jongware and I see consistent behavior with CS4 and CS5 — oh, actually. Are you using CS4 and CS5 on the same machine? Or on different machines? Because...I suspect this is handled by the AGM library, and it may well be that using CS4 on a machine with CS5 makes it use CS5's AGM library. But that might not be true at all, just speculation.
Anyhow, I'm not sure what Jongware's newfound Adobe Support optimism is based on. I suspect you'll hear from Design Science in the next day or two, and maybe from Adobe by September. But perhaps I am too pessimistic on Adobe Support right now.
I suppose making it consistently ccwcountour doesn't help you overmuch though. Hrmm.

Problems with Playback in CS5, CS4 (gotoAndPlay command)

I've encountered a really frustrating issue a couple times now throughout the past year, both in CS5 and CS4. I get to a certain point in a project where it just seems Flash does not want to cooperate anymore. It's difficult to even explain what the issue is because it doesn't seem to be triggered by one thing in particular, and often produces different results. It's almost as if the file becomes corrupted.
Here's what will happen:
*I will create symbols and place each one in its own frame on the main timeline, so that I can see them easily. The assets will usually contain animation inside the symbol. When I'm working on a particular symbol, I will put a gotoAndStop command on the first frame of the main timeline, pointing it to the symbol I want to test. So if I'm making a tea kettle, and have placed it on frame 4, I will put a "gotoAndStop(4);" command on the first frame.
*At a certain point, I will start having problems with test movies using this gotoAndStop method, even if I don't change any the scripting. Sometimes it will turn off layers that aren't supposed to be guides. Other times it will show me a blank frame. If I replace the gotoAndStop command with a stop command on the particular frame I want, my project will display correctly.
If it were a relatively small project, I would deal with it and test everything with the Stop command. However, this is a fairly big, complex project, and in my experience, this issue seems to contaminate other files that these assets are copied to.
*I've double checked the scripts inside of the symbol, which are all simple "stop();" or "gotoAndPlay("label");" commands, and there's no error showing up in the Output window.
*The most random things will trigger this problem. Sometimes, it's adding a shape tween to the symbol. Other times, I could turn off the background layer in the main timeline by making it a guide, and all my other layers would show up. But this background layer shouldn't affect anything, as it only has a "stop();" command inside. I was able to fix the problem once by saving the FLA as an Uncompressed Flash Document (xlf). When I opened the new file, it would play back correctly, but eventually, it'd break again.
I was having similar problems in CS4 on another project. In one case, we discovered we could fix the problem temporarily by deleting a single tiny line in one of the symbols. Eventually, it would pop up again, though. Another time, I could fix it by blowing away all the linkage identifiers, but that doesn't seem to be working this time.
It's very odd. Anyone have any ideas?

She didn't export it for CS4. If she had it wouldn't be an INDD file. She needs to export to IDML and you need to realize that this document may not look like it does in CS5.
You do need to upgrade if you want to work successfully with this other designer. Worth noting, in case you don't, is that you cannot upgrade individual components of the suite. Personally, I recommend Design Premium as the best bang for the buck.
Here's why: http://www.theindesignguy.com/purchase-advice.shtml
You find a link a Amazon on that page, which as far as I can tell is the best place to buy with free shipping and for the most part no sales tax.
Bob

Problem with memory settings

Hello,
i got a brand new PC4000 PRO from corsair and i got problem setting timings with this motherboard (neo2 PFISR - bios v3.9).
I can't set CAS timing nor to 3 neither to 2, it automatically turns it back to 2.5.
It seems that there is a lot of users having the same issues with this motherboard all over the net, but they told me to post here.
Has anybody an idea why this happen and how i can fix it ?
Thanks,
Fab

Hi there,
For some reason the BIOS settings have a rather confusion relation.
This is what my experiences have been, please try them and report your findings:
- MAT is enabled (and overrules SPD or manual memory timings) if:
Memory clock is set to "auto" within the frequency menu AND you set your perfomance above FAST.
To get a stable system, I'd advice the following:
- Go back to default BIOS settings.
- Disable D.O.T.
- Disable Spread Spectrum
- Fix your memory frequency to what it should be (e.g. 400Mhz), and not AUTO.
- Choose SPD timings for your memory (or set them below SPD timing manually).
- Start with performance settings to SLOW.
Check memory timing settings (chipset) with AIDA or CPU-z.
Check stability with Prime95 & torture test on maximum RAM.
Once the system is table, try upping the speed setting, check the actual timings and see what happens. If you still have problems, take out one memory stick and try with just one (maybe one is faulty).
Once you got it stable, continue from here.
Keep in mind: in my experience, if you set your memory frequency at a fixed frequency and use SPD settings, you will find that upping the performance settings, changes the memory timings! However as long as the frequency is not AUTO, MAT is not enabled, whatever the performance setting.
It really confused me at first, as I could not get the system running with MAT enabled, whatever memory time I entered. But with fix memory frequency, I got the system stable with 2,2,2,5 timing!
If anyone has techdoc on these matters, I'd appreciate an URL.
Bios 2.3 on 865PE neo2-LS
Twin Kingston ValueRam Cl2.5 (winbond)

Problem with Global settings panels

Using Flash player v10,1,53,64. with IE7 and Safari 5. I am trying to turn off the auto update notification as I work in an infant school and the pop-up notifications confuse the children.
Flash objects are working fine and the http://www.adobe.com/software/flash/about/ page tells me that I have the version of Flash installed with no problem.
I then right click on an active Flash object on a web page and choose "Global settings..."
Then choose Global Notification Settings Panel... , which takes me to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
At this point, instead of the panel I get the "This content requires Flash" replacement item - so I can't go any further. The same sthing happens with any of the Settings panels.
So one page on the Adobe site says I have the player installed, others don't.
Help much appreciated.

pwillener wrote:
Does that happen on all browsers?
Anyway, another way of disabling update notifications is by using a mms.cfg file; see http://kb2.adobe.com/cps/167/16701594.html for details.
It has happened with all the browsers I have checked, some may be a bit out of date as we don't use them regularly but I have the problem with
Internet Explorer 7.0.5730.13
Safari 5.0
Firefox 3.0.19
Chrome 5.0.375.86
I'll have a look at the mms.cfg option this afternoon.
I'm beginning to wonder whether this is caused by a firewall problem. I don't control the firewall settings. I've been assured by our network team that there is no block, but I'm wondering if that is right. I suppose they could have a block on flash content from not specifically authorised sites (which might well include Adobe) that would still let the Adobe site interrogate to find out the Flash version - but as I'm not 100% certain how the protocols work I can't be sure, I'll have to recheck that one.
Thanks for the help so far.

Problem with national settings on DS9i

Hi all,
I just installed Forms Developer 902 on Windows NT.
In registry my NLS_LANG=POLISH_POLAND.EE8WIN1250.
The Form i Menu module support my national settings
and don't have any problem with polish font.
My destination platform for OAS 902 is SUSE80 Linux.
I maked ftp binary copy *.fmb and *.mmb files from NT
to destination platform and compile everything.
But Form and Menu module not support my national settings.
Where is problem? Maybe any idea?
In {ORACLE_HOME}/bin/f90genm.sh
is NLS_LANG=POLISH_POLAND.EE8MSWIN1250 and
in {ORACLE_HOME}/forms90/server/default.env
is NLS_LANG=POLISH_POLAND.EE8MSWIN1250

Hi Billhp49,
Here are the first things I would try for being unable to send mail:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Cheers!
- Ari

Problem with offset settings CS5

Similar Messages

Maybe you are looking for