Problem with OIM11g r2 design console

We are unable login in to design console with "*xelsysadm*" user.
The user "xelsysadm" seems to be updated by Target recon on 4th of Jan . After restart of the server we are not able to login design console using same .but the identity and sys admin consoles are working.
Please provide a solution for this.
Thanks,
Venu

organizatin-> search and select Top organization-> open detail page-> click on Admin Role-> select Adminrole(System Administrator or User Administrator etc.) -> click on Assign button-> select user and add it-> finally click on okay.
make sure you select the 'sub-organization hirearchy'
using above steps i have created new user with admin roles,but i am unable login in to design console and identity, sysadm cosoles with the new user.
Please give me a solution for this

Similar Messages

Facing problem while logging into design console of OIM Machine

Hi All,
I am a trainee of IDM. I am getting an error while login to design console of OIM Machine. It is showing the error as
"Error Keyword: DAE.LOGON_DENIED
Description: Invalid Login.
Remedy: Contact your system administrator.
Action: E
Severity: H
Help URL:
Detail:
javax.security.auth.login.LoginException: java.net.MalformedURLException: no protocol: @jndi_url"
The thing is i can't get the problem(why it is showing the error like that).
The follwoing things i have done while configured the OIM with out LDAP synch.
after all the 6 configuration steps.
1. OIM configured successfully
2. After that in Weblogic /lib directory i have run- java -jar wljarbuilder.jar
3. Then copied the wlfullclient.jar to OIM_server/designconsole/ext directory
4. then i run the command ./xlclient.sh
6. after that i got window to login to designconsole ......but i got the problem at this step(user id and password are correct)
Please help me to solve this problem
Regards,
Trainee.

verify the url in config/xlconfig.xml
open xml and provide proper oim url twice in the xml
<ApplicationURL>http://<OIM_HOST_OR_IP:OIM_PORT/xlWebApp/loginWorkflowRenderer.do</ApplicationURL>
<Discovery>
          <CoreServer>
               <java.naming.provider.url>t3://<OIM_HOST_OR_IP:OIM_PORT/oim</java.naming.provider.url>
               <java.naming.factory.initial>weblogic.jndi.WLInitialContextFactory</java.naming.factory.initial>
          </CoreServer>
</Discovery>

Problem with Adobe LifeCycle Designer and NWDS

Hi,
I have a Problem using the LifeCycle Designer in NWDS. The LifeCycle Designer is installed but every time I am trying to start it from the NWDS there is an error - Could not find the required product. Install SAP Interactive Forms - Adobe LiveCycle Designer...... .
Does anybody have an idea?
Thanks!
best regards

Hi,
I had the same issue.
the versions were these:-
ALCD->8.1
NWDS->7.0.114
whenever I was trying to edit the interactive form the same error was thrown.
So I removed the Adobe LiveCycle Designer 8.1 from my machine.
Installed Adobe LiveCycle Designer 7.1 in place.
Now it is working fine.
Don't know the exact reasons why it was not working, but still keeping a copy of the 7.1 in your machine will help.
Regards,
AJ

Any problems with migrating In Design files from Mac to PC?

My wife is a commercial artist, and we are considering getting CS4 here at home on our PC. She has a Mac at work. Are there any problems with switching files between the Mac and the PC so she can get some work done on the same files at both the office and at home?
Thanks!

One recurring problem I have is the different types of the Symbol font. Mac InDesign insists on adding (TT) -- "Symbol (TT)" -- to 'Windows' documents, and vice versa. I think the root of the problem is Symbol on Windows is an OTF font, whereas on the Mac it's still a 'regular' TTF. My Mac compadres tell me it's not easy to transfer the Windows font to the Mac -- its own version apparently being rooted deep inside the system.
However, it's not a big issue, as we by default encapsulate Symbol with a character style. So when ID alerts us, all we have to do is redefine this style, be it on Windows or on Mac. Fortunately I've never seen text reflowing because of this (knocks on plywood desk).

Encountered problems with Adobe LiveCcle Designer ESA

Order number AD016252650:
My wife purchase our Adobe LiveCycle Desiger ES4 while working at our home office, she forwarded the link e-mail to my office after login we encountered problem with trying to down load it on my desktop. We encounter problems. Please contact my office 210-590-2776.
Ruben Jimenez & Associates, P.C.
4035 Naco-Perrin
San Antonio, Texas 78217

Thanks for your response. Recent evidence points to Wacom's tablet driver, not the plug-in.
Fact #1 - another identical system with ms mouse worked fine so I swapped out the Wacom tablet and bingo, the Akvis plug-in works again.
Fact #2 - So does Amazon's Kindle for PC app, which also quit working after running the Adobe CMM setup I'd downloaded.
Suggestion - since there's a legacy for CS5 users getting the "you should download CMM" pop-up, yet no need to do this, maybe Adobe should remove the CMM download page from its website - or flag this download as unneccessary for photoshop users. All Best, Charles Pierce.
Message was edited by: PECourtejoie Please do not autoquote messages, it makes threads difficult to follow.

Problem with custom sharepoint designer approval workflow - check box: 'Start this workflow to approve publishing a major version of an item' is greyed out

I wanted to create a simple approval workflow. Hence I opted to start from scratch rather than copy the OOTB approval WF. Using SharePoint Designer (not Visual studio) I created a reusable workflow and have added the built in 'Start approval process' action.
It's saved and published globally.
Everything works fine except that when associating the WF with a list the 'Start this workflow to approve publishing a major version of an item' check box is disabled.
Major and minor versioning is enabled for the library.
What am I missing here? Or do I have to start from the OOTB approval WF to get this to work?
Regards
Henning

Again - new ideas pop up right after defining the issue as a problem. :-) Problem solved!
I solved this by creating a new workflow from the original publishing approval workflow (copy and replace), but instead of tweaking the already defined approval process (WF action) I deleted it, then deleted all initiation form and local variables,
and then added the 'Start approval process' action again. This re-installs all the necessary local variables without any initiation form involvement, which is just what I want.
From here I can tweak the workflow to make it more user friendly, much like
described by Bobby Chiang in his great blog.
Remember to add action Set Workflow Variable 'EnableContentApproval' to Yes right before the Start Approval Process action, else the document's status won't be set to 'Approved' or 'Rejected' as an output of the workflow.
Learning every day!
Henning

Problems with changings within Design Studio Report published on BI Mobile App

Hello BI Mobile Experts,
At the moment we are setting up a prototyp for BI Mobile reporting with SAP Business Objects Mobile and the BI Mobile App.
We created a report with Design Studio and published this report without problems within the Mobile Category. This Report was displayed correctly on iPads we are working with.
This week we made some changings within the report (new Crosstab, changings within css file). Unfortunatelly this changings were not displayed within the Mobile App. When we run the report local on the desktop within Design Studio everything works fine and is displayed correctly. It seems like the iPad is caching the report and doesn't get the new definitions, because after uninstalling the complete app from the iPad and installing it again, the report is displayed correctly.
Does anybody of you have same issues and is knowing how to solve that?
Thank you and best regards,
Gerardo

Hi Emre
I recall when I installed DS on our BI 4.1 SP2 system, the Analysis Application Service is not added to the Adaptive Processing Server (APS) automatically, I had to manually include the service into the APS for it to work correctly.
To make the dashboards visible to the BI Mobile applications, you must assign the category "Mobile" to the dashboards.
Regards
Derek

Problem with configure engine in console-mode unix

i have a problem, i tried to configure an engine of enterprise in HP_UX, but the grapical-mode doesn´t work, how can i start the admin console in console-mode??? i tried ./albpmadmcenter -console but not work!!!

Hi,
You would have to install using silent mode to configure the process administrator. This option is available in Oracle BPM (OBPM). Not sure if it exists even with ALBPM 6.0.
http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html?t=modules/admin_center/config_wizard/c_Running_Config_Wiz_Silent.html
Hope this helps.
Sarat

Problems with Dynamic PDF design

I have created a dynamic PDF Form having 30 text fields in a row. All these fields are bounded to XSD. The design is like, a row of fields display a single user informations. When I import a XML with 100 user informations, then my PDF crashes. If I import a XML with 50 user informations, then it works fine. Anything beyond that count causes the PDF to close automatically. I believe, its the number of fields which causes the problem. I may be wrong.
I also needs to enter 100 user informations by adding rows one by one. The PDF becomes very slower when I add beyond 35th row. I'm using Livecycle designer 8.0 for designing dynamic PDFs and using Adobe reader 8.1.0 for viewing.
Can anyone help me on this?

Here is the link:
http://www.destiny-seminars.com/dev/index.html
The dev directory contains:
index.html
contact.html
speaking.html
training.html
about.html
The first page to look at where I had the most recent, most completed page, is - about.html. That will be my template for the rest. Also, there was supposed to be a feed from my blog showing up on this page; it was also perfect at first. Then, my shaded black site links section and and the copyright footer quit showing up. When I commented out the blog feed code, the footers showed up again. At one time, it all was working. so this is yet another problem I cannot figure out why stuff is changing seemingly by itself.
These pages were originally created in an online tool called webflow.com. It worked great, but they did not honor the full trial changes before they made site updates that eliminated any free use at all. This code for all files and images were exported into a zip file. The CSS files are titles as follows, in the css directory:
normalize.css
timothy-hartwell.css
webflow.css
Please help!

Create CAPI definition problem with Headstart 6i / Designer 6i rel. 4.3

During migration from hsd50/des60 to hsd65/des6i rel 4.3 of an application using CDM ruleframe: according to the migration guide, one step is "Upgrading Existing CDM RuleFrame objects", which includes running the Create CAPI definition (Headstart utility). After that step we assume de created CAPI's should be generated together with the Table API. But executing the CAPI-scripts results in errormessages. After comparing the 60 and 6i versions, we found a bug, probably caused by the Headstart utility: In the package body, after the header of the first function of the Business Rule Check Functions, suddenly the declaration section of the package is again inserted, and after that the first function is again defined followed by the rest, causing also a missing end statement at the end of the package.
Is this known, and if so, is there a fix available?
Regards, Paul.

Paul,
We have found the cause for your other problem (the repeating of the declaration section).
With 6.5 a new package property Private Declaration was introduced in Designer.
This property should officially be used instead of PL/SQL block to specify package body declaration
(assuming you define all package procedures and functions in separate PL/SQL Definitions).
However, at first the migration from an earlier version of Designer did not pose any problems
because of Designer bug 1470283. That's why you won't find anything about this in the Headstart Migration Guide.
Now that Designer bug is fixed, migrating a CAPI causes part of the PL/SQL Block to be moved to the Private Declaration.
If you then generate the CAPI package to the database, it works fine, but when you run the CAPI utility again,
it inserts the package declarations again in the PL/SQL Block (leaving the Private Declaration in tact).
That's when you get duplicate package declarations. We logged this as Headstart bug 2527128.
You already found a workaround: deleting the CAPI and generating it again. Another workaround is
moving the Private Declaration to the top of the PL/SQL Block (this allows you to keep your existing
Revision History).
Hope this helps,
Sandra

Problems with connect to Em console and IE6.0 with sp1

After installing OEM10g on W2K (server) and trying to connect and login to the management console (http://<servername>:80/em ) with Internet explorer I got the message that my IE browser was to low (5.0) and I have to upgrade to IE5.5 or higher. So I decided to install the newest IE (6.0 + sp1) and tried again to login to Oracle Enterprise Manager but getting a script error now.
The strange thing is that I can connect (same way) from my own pc but there I have IE 6.0 without sp1 and there it works fine.
Is this a bug or is there an option in IE6.0 sp1 to disable/ignore the scripting error ?

I found there's a patch available for IE6SP1 from microsoft :
Overview
In the last few weeks you might have experienced difficulty logging on to secure Web sites or completing transactions on the Web. You might also have noticed more HTTP 500 internal server error messages.
If you have been experiencing these problems recently, then your computer might have a recent security update installed (Cumulative Security Update for Internet Explorer MS04-004) that changes how Internet Explorer sends information to the Internet. Some secure Web sites do not work well with this security update and might cause you to experience the problems above.
I have installed this patch, but it still doesn't solve my problem.
Perhaps because this patch is for IE6sp1 (64 bits), I have the 128 bits version.

Problems with Responsive Web Design

Not really sure how to ask this, but here we go. I am new to responsive web design; always worked with html coding and tables like in Front Page. I have the concept down of sections, then containers, then columns if needed to place my content and images. Several times in my process, I get a page done or nearly done, and then later on, my text or images re-arrange themselves and overlap themselves. In other words, the text layers itself on top of another text. The two images below were laid out perfectly just a little while ago.
The max width of all containers on the page is 940px. It works great, until it doesn't I have not changed any margins or anything to make this “overlapping” of objects occur. I get satisfied with a page, and all the sudden, magically it screws up. What am I missing here? If I highlight the container, it shows a margin on the left of 342px, and a margin on the right of 343px. Looking at the CSS Designer however, these numbers do not show up. Only the 940px. I am not changing the CSS either prior to this event happening. This occurs whether in IE or Chrome.
In this first image, the red breadcrumbs started out being parallel with the search feature, and should be in the gray area. The gray menu text, was in the white area above the gray bar when it looked right. Both sets of items (i.e., red breadcrumb and search feature are set in two columns. Each column with is 50%.
In this next image, the items in the black bar were side, by side. Now they are not, and I did nothing to them or the stylesheet. The mail image column is 8.333%, the join text is in a column that is 25%, and the join us form is in a column that is 66.666%.
Hope this helps you help me! Very frustrated.

Here is the link:
http://www.destiny-seminars.com/dev/index.html
The dev directory contains:
index.html
contact.html
speaking.html
training.html
about.html
The first page to look at where I had the most recent, most completed page, is - about.html. That will be my template for the rest. Also, there was supposed to be a feed from my blog showing up on this page; it was also perfect at first. Then, my shaded black site links section and and the copyright footer quit showing up. When I commented out the blog feed code, the footers showed up again. At one time, it all was working. so this is yet another problem I cannot figure out why stuff is changing seemingly by itself.
These pages were originally created in an online tool called webflow.com. It worked great, but they did not honor the full trial changes before they made site updates that eliminated any free use at all. This code for all files and images were exported into a zip file. The CSS files are titles as follows, in the css directory:
normalize.css
timothy-hartwell.css
webflow.css
Please help!

Output Variable - Type: Date - Problem with WSDL in Designer

Greetings,
We are seeking some information about the following:
We have a process in Process Designer that has and output variable of the type: Date. When the process is activated and we connect to a WSDL in LC ES Designer we get both a DATE and CALENDAR in the Data View.
Hope that is at least somewhat clear. Please respond with any help or questions.
Thanks,
Rick Kuhlmann
Tech-Pro

This is to distinguish between java.util.Date and java.util.Calendar types. If the date is returned as java.util.Date, it will be in the DATE.date field. If the date is returned as java.util.Calendar, it will be in the DATE.calendar field.
There are a bunch of xPath dates function in the xPath builder you can use.
Jasmin

Problem with SMC(Solaris Management Console)

Hi
I am trying to start SMC for managing the users and groups.But i am getting the following errors.
bash-3.00# smc
com.sun.management.viper.CriticalStopException: javax/help/JHelp
at com.sun.management.viperimpl.console.gui.SMCConsole.start(SMCConsole.java:276)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(BaseConsoleOptionsManager.java:752)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsole(BaseConsoleOptionsManager.java:621)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.java:167)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:834)
Could any one help me out.
Thanks inadvance.

Instead of using SMC - why not use the format command - this utility has traditionally allowed the sysadmin to perform disk related tasks. If you plan to be "playing around" with disks on a solaris system - smc is not the tool. If you had intended to use ZFS - you're stuck with the command line (really sucks if you're dependent on GUIs). Either use the free SVM command line or get a copy of Veritas Foundation Basic Suite "free" (but crippled - limited to 4 volumes and 4 filesystems) - http://www.symantec.com/enterprise/sfbasic/index.jsp. At least with Veritas - the GUI will step you thru the entire process of disk management. I can't say that for SVM, with a bit of persistence and skill - you might not be disappointed. I prefer the command line because you can specify a myriad of parameters that the GUIs can't initutively tell you.
Storage Foundation Basic 4.1 is available on the following platforms:
* Solaris 10 x64
* RHEL 4 (Xeon, EM64T and AMD Opteron) and Itanium 2
* SLES 9 (Xeon, EM64T and AMD Opteron) and Itanium 2
Storage Foundation Basic 5.0 is available on the following platforms:
* Solaris 8, 9, 10 (SPARC)
* AIX 5.2/5.3
* Red Hat Enterprise Linux 4 (RHEL 4) on EM64T/Opteron
* Novell SUSE Enterprise Linux Server 9 (SLES) on EM64T/Opteron

Problems with Creative Suite Design Premium.

Does Freative Suite Design Premium 3 work on Window 7 Pro 64 bit?

I initially installed Creative Suite 3 Design Premium on my PC with Windows 7 64 Bit Home which was upgraded to Professional in December last year so the full prgramme has been running fine until the evening of May 13th then on Monday 14th nothing would open. I uninstalled and reinstalled several times but with no success. Photoshop open but with a windows error message then closes down no other programme will open. I have tried installing without acrobat as it always seemed to want a Vista dll which I have never had ( having said that it will install on it's own after cancelling the vista request box and runs okay). I tried various suggestions from a helpful person on the Adobe chat helpline but then someone else withdrew the compalint saying that CSD 3 did not work with 64 bit which is patently untrue as it had been running successfully for over a year, but suggesting I buy an upgrade. I am quite happy with CSD3 for the moment but given the sudden failure this proposal did make me wonder if soome Adobe upgrade that has come throgh is interferring with 64 bit systems perhaps to get people to upgrade. I would hope not!
In any case perhaps you can let me know how I submit a formal complaint to Adobe as there does not seem to be a function to do so. I have spent a significant amount of money for this prgramme and I expect it to work.
So CDS 3 does work with 64 bit the question is why should it stop now? Intriguing but extremely frustrating.
Thanks for your mail since I cannot seem to reactivate my case # 0183251810 to take this matter further.

Problem with OIM11g r2 design console

Similar Messages

Maybe you are looking for