Problem with one AVCHD file using L&T

I just shot a project with a new Sony NX5 and recorded to both the FMU 128 hard drive and a 32 gig SDHC class 10 card. I have a total of 3hours and 20 minutes and about 75 clips. The clips are 1920x1080 60i, again it is AVCHD.
I'm using L&T to transcode to Pro Res LT. Everything imports fine, except clip #15, which is the longest clip at 36 minutes long. FCP quits and I get an error message.
I tried the files from the cards and FMU 128 (they were copied to my internal 7200rpm hard drive and an external Lacie connected via FW800). All give me a problem on clip 15.
I'm using FCP 7.

It says Final Cut Pro quit unexpectedly and then:
Process: Final Cut Pro [189]
Path: /Users/marty/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 7.0.3 (7.0.3)
Build Info: FCPApp-1008261348~8
Code Type: X86 (Native)
Parent Process: launchd [118]
Date/Time: 2011-03-01 07:00:54.359 -0500
OS Version: Mac OS X 10.6.6 (10J567)
Report Version: 6
Interval Since Last Report: 64983 sec
Crashes Since Last Report: 7
Per-App Interval Since Last Report: 151694 sec
Per-App Crashes Since Last Report: 7
Anonymous UUID: 6C3017D4-A842-40C4-9E93-B123C3DEF9B3
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 36
Application Specific Information:
* Terminating app due to uncaught exception 'NSMallocException', reason: '* -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (74195)'
* Call stack at first throw:
and then it keeps going. I thought the above would be the most important. I tried Clip Wrap, and that took forever!! It broke this problem child clip into 4 segments (3 of them were about 11 minutes and the 4th was a minute or so). The first clip played fine and the rest started with a green frame and were all "strobe effect" when the played. I did Clipwrap again and did "Join Selected Clips" and that seemed to work. It made the 4 clips one video and it plays perfectly.
So I got the clip to work using Clipwrap, but it wont' work in FCP L&T.

Similar Messages

Serial no. invalid problem and problem with creating PDF file using adobe acrobat x pro

I tried to download adobe X pro on my new computer and entered the serial No, bu the program said the number is invalid. Actually the number is valid, confirmed by the info listed in my account. please help! also I downloaded the trial version now, but when I use it, the file it created is not shown as adobe file, but as firefox HTML file. I don't know why. please help!

Error "The serial number is not valid for this product" | Creative Suite

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me. Only have a problem with one. Is there a fix?

LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?

Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed

Problem with Pole zero analysis using multisim

Problem with Pole zero analysis using multisim
When I tried to find input impedance function's pole zero of a parallel LC network using Multisim
pole zero analysis, I get following message
| | doAnalyses: matrix is singular
| |
| |
| | pz simulation(s) aborted "
The circuit as well as log file attached.
How to correctly perform pole zero analysis?
Solved!
Go to Solution.
Attachments:
Parallel LC.JPG ‏8 KB
parallel LC.txt ‏7 KB

dear sir,
thanks for your earlier reply to my question on pole zero analysis
one more problem on pole zero analysis ;
i tried to do pole zero analysis for circuit(shown in attached file where C1=1/6F(167mF) C2=5/18F(278mF) for which
z(s)= (s^2+9)(s^2+1)
s(s^2+4)
for which zeros are at +/-3j ,+/-1j
poles at 0 ,+/-2j as per theory:
But multisim gives different values (shown in attached file)
what is the problem?
please clarify.
thanks & regards
sagar vanarase
Attachments:
1portLC.JPG ‏219 KB

Success with iTunes but a problem with a temp file

Further to my recent post, I have now had some form of success with opening iTunes but I can only do this if my external hard drive (which has the remnants of some file left).
I have tried to copy and paste the files relating to iTunes but for some reason, I am unable to even access a file labelled "TEMP FILE".
Can anybody help or indeed send via email a copy of the file as I dont think there is anything in it. I know that when I have my external drive repaired I will not be able to access iTunes.
PLEASE HELP !!!!!!!

iTunes cannot run because it has discovered a problem with your audio configuration.
That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
The following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

TS3276 I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails to people in my address book. Hotmail advised me to change my password for that account, which I did. Why won't mail recognise the new password?

I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails from my address book. Hotmail advised me to delete all contacts and change the password for that account, which I did on my laptop running windows XP. The change was successful and I was able to send and receive emails with no problem. I then had to change the account password on my iPhone 4s, which I did and it too was successful but when I came to change the password on my iMac, running the latest version of Lion it would not recognise the new password. I have tried to remove the account details and re-install but every time I go to add new account my old details are in the box. This is very frustrating as I use my iMac for all my profects and I need to access my email. Please help.

hi guys,
I had already deleted all reference to the hotmail account in question from the keychain access app, I have also tried to delete and re-instal the account details from within mail. The icon in the side bar dissapears but when I go to Add Account, the old account details are in the new account box. I then input my new password but am told that the server does not recognise it. If I access hotmail via google on the iMac I can get into my account with no problems. I am thinking there must be some other form of security system within the mac software that is blocking the new password. This is driving me nuts. I have been trying to resolve this for the last two days. Thank you for your advise anyway.

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?

How can I associate 2 appleids with one account or use a different Appleid for imessage as described in another post?
I have rejoined the iPhone community, not with one iPhone but with two. My wife agreed to move from the unenlightened!
I have set up both under my apple account and want to keep it that way. But I do not want iMessages going to both phones. I would like separate message queues but share all apps and other purches from the store.
I have created a separate AppleID for her but under Settings>Message>Receive At (it currently says 2 addresses) > ... will not allow me to change the current eMail address and when I add hers (her appleid) it errors out. The only thing I can do in the Apple ID field is to manage my account and not change it to hers.
How can I have 2 iPhones (and my iPad) on the same account but have separate identies?
Thanks,
LpGrumpy

1. Yes. Restart with the Option key held down as needed.
2. No, it won't be a problem.
(83373)

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

InDesign CS5 causing problems with InCopy assignment file but not content files

I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
Andrea

Thanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Problem with one AVCHD file using L&T

Similar Messages

Maybe you are looking for