Problem with ONE SINGLE site with WRT610N

Hello,
First, sorry for my very poor English
I have a Linksys WRT610N with firmware 1.00.03 B15 (latest I think)
Last three days I have trouble connecting to a single website. This site is www.bdgest.com
I can access all other sites I want, but that one is very difficult to access, very slow with timeouts and error 404 messages.
When I connect to my modem with a cable, everything is OK. If I connect with a cable or wifi to the Linksys router, the access is weak. The problem is not my PC because I have the same problem with my I-Pod touch.
I don't made any change to the Linksys configuration.
Can somebody help me ?

I found another site that goes weak. www.enviedeseduire.fr
The TRACERT informations for both sites are VERY interresting :
tracert enviedeseduire.fr
Détermination de l'itinéraire vers enviedeseduire.fr [91.121.76.160] avec un maximum de 30 sauts :
1 8 ms 1 ms 1 ms 172.16.1.1
2 14 ms 24 ms 15 ms 10.89.128.1
3 13 ms 8 ms 11 ms 78.129.127.113
4 17 ms 17 ms 12 ms 212.68.211.2
5 16 ms 16 ms 16 ms 212.68.211.29
6 36 ms 14 ms 22 ms 212.68.211.133
7 14 ms 11 ms 15 ms 195.219.227.5
8 14 ms 19 ms 13 ms 195.219.227.14
9 20 ms 20 ms 16 ms if-10-1-1-0.tcore1.PVU-Paris.as6453.net [80.231.153.69]
10 21 ms * 27 ms th2-5-6k.fr.eu [213.186.32.245]
11 * * * Délai d'attente de la demande dépassé.
12 29 ms 29 ms 105 ms rbx-g1-a9.fr.eu [91.121.215.133]
13 111 ms 22 ms * rbx-2-6k.fr.eu [213.186.32.234]
14 * * * Délai d'attente de la demande dépassé.
15 23 ms 24 ms 22 ms ns25848.ovh.net [91.121.76.160]
Itinéraire déterminé.
tracert bdgest.com
Détermination de l'itinéraire vers bdgest.com [87.98.152.92] avec un maximum de 30 sauts :
1 7 ms 1 ms 1 ms 172.16.1.1
2 11 ms 9 ms 11 ms 10.89.128.1
3 10 ms 12 ms 8 ms 78.129.127.113
4 18 ms 17 ms 17 ms 212.68.211.2
5 62 ms 9 ms 13 ms 212.68.211.29
6 19 ms 11 ms 17 ms 212.68.211.133
7 13 ms 16 ms 16 ms 195.219.227.5
8 91 ms 14 ms 15 ms 195.219.228.1
9 20 ms 21 ms 17 ms if-10-1-1-0.tcore1.PVU-Paris.as6453.net [80.231.153.69]
10 * * * Délai d'attente de la demande dépassé.
11 * * * Délai d'attente de la demande dépassé.
12 30 ms 29 ms 28 ms rbx-g2-a9.fr.eu [91.121.215.151]
13 38 ms 24 ms 24 ms rbx-s3-6k.fr.eu [213.186.32.166]
14 22 ms 30 ms 28 ms 87-98-152-92.ovh.net [87.98.152.92]
Itinéraire déterminé.
Everything goes wrong after both if-10-1-1-0.tcore1.PVU-Paris.as6453.net [80.231.153.69]
Any idea ?

Similar Messages

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

JDBC communication stopped if problem with one single JDBC interface

Hello,
Can you please explain this phrase
"JDBC communication stopped if problem with one single JDBC interface"
THanks,
Soorya

If you are having a problem with a JDBC interface (lets consider this to be a communication channel) then the communication is stopped (via that channel) (only in the case of EOIO).
Hope this clarifies.
Cheers,
Sarath
Award if helpful.

Does USD NACHA CCD Plus Format support one single payment with one vendor?

Hi,
We are implementing USD NACHA CCD Plus Format file for my customer.
Have the following query:
Does USD NACHA CCD Plus Format support one single payment with one vendor and another single payment with
different vendor in single file or will it generate two files for two payments or will it support single payment only.
Can anyone help us in this regard.
Thanks,Venkat.

I have created one invoice1 with one vendor and another invoice 2 with
different vendor processed the PPR using USD NACHA CCD Plus Format .
Both two payments came single file.
But we know that USD NACHA CCD Plus Format support Single Payment only.
Can anyone help us in this regard.
Thanks,Venkat

Select or deselect multiple rows with one single selection event

Does anyone know how to create a JTable which can select or deselect multiple rows with one single selection event in JTable. Fore example, if the table has
row1
row2
row3
row4
row5
row6
What I need is when user select row1 or row2, both row1 and row2 should be set to be selected. Then if user press CTRL and click one of row3 or row4, both of them should be selected including the previouse selected row1 and row2.
For deselection, if row1 and row2 are selected, when users deselect one of row1 or row2, both of them should be deselected.
Hopefully someone can give me a hint.

Here is a partial solution using a JList. Only one line gets highlighted when the user makes a selection in the list. But, two lines are returned. There is a blank line between every two lines.
     private void addLineToList() {
          String a = f_one.getText();
          String b = f_two.getText();
          if (a.length() == 0) {
               Utils.showInformationMessage("Item field is empty.");
               f_one.requestFocusInWindow();
               return;
          if (b.length() == 0) {
               Utils.showInformationMessage("Match field is empty.");
               f_two.requestFocusInWindow();
               return;
          model.addElement("item: " + a);
          model.addElement("match: " + b);
          model.addElement(" ");
          int size = model.getSize();
          pairList.setSelectedIndex(size - 3);
          f_one.setText("");
          f_two.setText("");
          f_one.requestFocusInWindow();
     private void editList() {
          if (pairList.getSelectedValue().toString().equalsIgnoreCase(" ")) {
               Toolkit.getDefaultToolkit().beep();
               f_one.requestFocusInWindow();
               return;
          if (!f_one.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Item field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               OptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          if (!f_two.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Match field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               JOptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          String item = "";
          String match = "";
          int index = pairList.getSelectedIndex();
          String choice = model.getElementAt(index).toString();
          if (choice.startsWith("item")) {
               item = choice;
               match = model.getElementAt(index + 1).toString();
               model.remove(index);
               model.remove(index);
               model.remove(index);
          else {
               item = model.getElementAt(index - 1).toString();
               match = choice;
               model.remove(index + 1);
               model.remove(index);
               model.remove(index - 1);
          int size = model.getSize();
          if (size > 2) {
               pairList.setSelectedIndex(size - 2);
          f_one.setText(item.substring(6));
          f_two.setText(match.substring(7));
          f_one.requestFocusInWindow();
     }

One primary site with a remote DP/MP, or two with a CAS server?

Hi
For a new SCCM 2012 environment, we have the following setup:
- HQ site with 1500 PCs/users
- Branch office in a separate AD site, slow WAN link, 120 PCs/users
Now, I'd like to keep the setup simple so my first instinct is to deploy one primary site with a server in the branch office fulfilling the MP/DP/PXE/Update Point roles.
However, the site has a local technician who needs the ability to deploy images to the local machines. Running the console from the branch office to the HQ site is not an option, since consoles (such as ADUC) have very poor performance over the WAN.
This brings me to the option of either a primary HQ site with a branch secondary site (something I'd like to stay away from, since it requires SQL and the technician would still need to connect the console to the primary site anyway!), or 2 primary sites both
connected by a CAS server. For what the technician needs, I think this is overkill, and I don't like the idea of the added complexity, or keeping both sites in-step as far as replication is concerned.
Im leaning towards the 1 primary site, remote MP/DP option, but Im not sure how the technician would image machines without the console. I thought perhaps creating an optional advertisement to a dynamic collection that he could control another way (e.g.
using a registry key), giving him the option to trigger deployments.
Thoughts?

Having a local DP will ensure that all deployments are made locally if the content is distributed.
You'll have to get your content there first, if possible build your DP in your main office and ship it to the remote location after. Otherwise use prestage content. Getting GB of stuff throught that link will otherwise take days.
For your deployment, why does the technician need access to the console ? Could you deploy to "unknown computers" ?
Benoit Lecours | Blog: System Center Dudes

How to sync two IPhone with one PC , but with different applications

How to sync two IPhone with one PC , but with different applications ?
We have two IPhones , but one PC , we want to sync separately , is that possible ?

Absolutely, connect each phone, select what content you want on each phone, then hit the sync button. iTunes will keep everything straight, by device, upon subsequent syncs, including separate backups.

Do all members in Family Sharing have to pay with one single account's credit card?

I have a credit card registered in my account and my sister has her own credit card, yet, I want us to Family Share some apps and music albums.
When I sent my sister the Family Sharing (FS) invitation, she told me she would better not join the family 'cause then we would both have to pay with one credit card (which would be mine since I'm the family organizer). I wanted to know if this is actually true or if each family member can have his/her own credit card even after FS.
Thanks in advance for your answers.

It is true. All purchases by members of the family group are charged to the family organizer's credit card. The only workaround for this would be for her to purchase and redeem iTunes gift card to create and iTunes store credit for her account. Then her purchases would first be deducted from her credit before any balance due would be charged to the organizer's card.

How to make a podcast with one still image with iMovie 09

I'm using trying to transfer my podcasts to Vimeo. I've been using iWeb to create a person web site with video and podcasts. I have embedded Vimeo with "html snippet widge." I want to do the same thing with audio, however Vimeo only accept "video" files.
In my attempt to work around Vimeo's video issues, I had the idea to use iMovie 09 to create a "video file" using a single still image with my audio podcast play in the background. The single image would be consistent for the entire length of the audio. It seems simple...one still image file and one audio file.
All of my audio files are less than 45 minutes in length. The problem is that when I insert an image in iMovie I can't get it to last for more than 10:00 minutes of my podcast. I've had to drag the same image over several times, extend each image's length to 10:00 minutes until I have enough images to last the full length of the audio file.
I'm sure there's a simple way to do this with one image, used one time, and have the audio added.
Anyone understand my situation and have a good idea?

The most efficient method would be for you to do this in iMovie 6. You can download a version if you don't already have it on your computer. http://supportdownload.apple.com/download.info.apple.com/AppleSupport_Area/Apple_Software_Updates/Mac_OSX/downloads/061-3532.20070807.nq3ER/iMovieHD6.dmg
Put all your clips into a new iMovie project, in the order you wish them to play. Use the chapters tab and add chapter markers for each clip (except the first one; iDVD will add that one for you). Close iMovie.
Open an new iDVD project. Use the Media tab, then Movies, to locate your new iMovie. Drag and drop it onto the main iDVD window, taking care not to drop it into a drop zone. You should then see the title of your movie and the two options: Play Movie (which will play all the clips sequentiallly) and Scene Selection (which will take you to submenu(s) where you can select which clip to view).

Shopping cart created with one line item with qty 10 . PR need to be creat

Hi gurus
1SC created for ONE LINE ITEM with QTY 10
PR need to be created with 10 LINE ITEMS with Qty 1.
Classic Scanario
Advise .
2.Also please let me know what the batch jobs for delta ( user data or HR data) upload. To upload all user changed data synchonization job
3.Also please let me know what is the batch job for escalation emails for approvals
SD

close not answered

Problems with one particular site

Hi all,
I've noticed various posts where people mention they can't get on one specific website and I've always wondered why that could be, but it's never happened to me ... till now.
I can't get on this one, www.beestonlightingcompany.co.uk (and .com) who is one of my new clients. I've tried everything I can think of, I've emptied caches and cookies, I've deleted prefs, rebuilt permissions, reset my modem and router (even tried direct to the modem, no router) released and refreshed my DHCP connection - the lot. No joy.
The fact that I can't see the site on either of my Macs in any browser (Safari, Opera, Netscape, Explorer, Firefox, etc.,) seems to suggest to me there's either a system thing happening here or something up with my router, though like I said even taking that out of the loop didn't help.
Also all the other clients I have websites for are hosted at the same place and I can see those fine. I can also ping beestonlightingcompany with no trouble and I can get to it using CaptainFTP for uploading. And my client can see the site at both addresses using his PC - fortunately, be a big problem if he couldn't! I suspect anyone here who tries it will get to it too ... it's just me. Wierd.
Any ideas anyone? This is really bugging me!

Thing --
That site works fine for me.
So, maybe try these and get back to us, OK?
Have you done these? Do these one at a time, and then restart and retest Safari after each one.
1. Empty your cache & History settings via the Safari menu
2. Trash your Icons Folder:
HD>Users>Home>YourName>Library>Safari -->Icons
Restart Safari and a new folder will be automatically regenerated.
(This folder saves favicons of all the sites you visit. Needs cleaning periodically -- or you can change that file's preferences to "Read Only"
rather than "Read & Write." This will keep it from growing in size.)
3. Launch Font Book and check all fonts for duplicates. A duplicated font will have a bullet beside the font family and you can resolve duplicates by selecting the font and at the menu bar, go to Edit > Resolve Duplicates.
Do this for each font with a bullet next to it.
If you're still having problems:
4. Shut down your computer . . . unplug the computer, modem, and router, if you have one. Let everything sit for 2-3 minutes. Plug everything back in, start up your modem & router, then restart your computer.
Do you have internet apps SpeedDownload, iGetter, PithHelmet, Acid Search, Safari Enhancer ? Or Norton or Virex? Sometimes non-apple internet apps need updating or uninstalling. If you do, let us know which ones and which version, please.
Hope this helps

Multiple Domains with one single Portal

We have installed Oracle Infrastructure and Oracle Midtier on one box. Let's say the domain name is http://www.abc.com. When we query http://www.abc.com, it
goes to the SSO (Infra) and validates the username and password and takes it back to the Mid-Tier Portal Pages. At this junction, everything is working as expected.
Now, we created two more webpages and they correspond to two domains -- let's say http://www.pqr.com and http://www.xyz.com. The two webpages that got created were PUBLIC pages, so anybody can have access to those pages.
Can we implement our requirements using one infrastructure and one midtier (1st)installation? OR do we install two more midtier (2nd, 3rd) to correspond
to each domain name which are www.pqr.com and www.xyz.com and then have the proxy server redirect the request for www.abc.com to 1st-Midtier, www.pqr.com
to 2nd-Midtier and www.xyz.com to 3rd-Midtier?
We have a apache proxy server installed in front of the 9iAS, but we are going to use it just for redirection.
I understand Oracle Infrastructure has only ONE portal Schema and so how would multiple midtier (webpages) will reside? Do I need to create another PORTAL repository and a new DAD, so that www.pqr.com points to the 2nd-Portal Repository and www.xyz.com points to the 3rd-portal?

Through a single mid-tier it is possible to configure Oracle HTTP Server/Web Cache such that they are configured to handle multiple logical site names (e.g. www.pqr.com and www.xyz.com) by using Virtual Hosts.
In terms of a single Portal Repository being accessed by multiple mid-tiers (or logical sites), this is not currently possible since the Portal Repository is configured with only one set of site details.
For further information on configuring Virtual Hosts and Portal see the Advanced Chapter of the 10g Portal configuration guide...
http://download-west.oracle.com/docs/cd/B10464_01/portal.904/b10356/cg_advnc.htm#1040267

Safari trouble with one particular site

I have a problem with safari when I use one particular website (www.itsagoal.com)
I've noticed that it is the website in particular that may be at fault. The website is www.itsagoal.com and what happens is that the built in clock for that website goes mentally fast. Although I noticed this issue before under 10.4.5, it was never a problem. It didn't affect scrolling, or the fans or anything. It was purely just an asthetic bug. However, now, under 10.4.8 (using safari I must add) it really is a problem.
Everything is fine at the site, until you enter a forum thread. Then the time goes crazy. You can do this without needing to login, here http://www.itsagoal.com/community/forums/viewtopic.php?id=9D9B62088B9CBF508BBBAB 0785D7BA4F
Could somebody please visit those pages and confirm a few things for me.
1. That the time (which is top left of the screen) is fine on any non forum page.
2. That the time does indeed go crazy.
3. Are there any experts amongst you that have seen this before and perhaps know what the problem is with the site?
Many thanks
iLee
p.s. How do I go about debugging this myself so that I can let the developer of the site know whats happening?
Edit: In firefox (and Camino), the time only updates when changing pages and is not a problem at all.

Hi iLee
yes, the clock runs fast for me too using Safari.
What actual problems does it cause you?
If you enable the Debug menu via Terminal or some third part utility. Then use the User-Agent menu item & set it to "MSIE6" ....... this tells the webpage we're using Internet Explorer 6; and seems enough to get the clock behaving normally. Works for me.

IMessage not working with one single contact

My iPhone has stopped sending iMessages to one singular contact. Before today we have been using iMessage to communicate regularly. This is the only contact that iMessage does to not work with on my phone and on his he can iMessage me but I don't receive these messages. Also in group chats we can no longer communicate due to this issue.

Did anyone fix this problem?
This just happened to me yesterday! I have iOS 7.1, had no issues until yesterday!
I can iMessage my iMessage friends on my iPad with no problem, but the iPhone 5 randomlly decided yesterday that it would only iMessage selective people!
I've tried everthing I can find so far.

Can't rip one single CD with Asunder

Hi.
I always ripped CDs with asunder since i use linux. With Arch, then with Gentoo but when i came back to Arch, recently i can't rip a damn CD with asunder. Depending on the CD it will stop at a certain percentage of progress and then, if i cancel it it freezes and i have to kill the process... The problem is that it can be hours like that it won't post an error, just stops.
I think i was able to do 1 or 2 CDs... But I tried with lots of them... It's not a anti-copy protection problem because discs i had ripped before (with asunder) and then i deleted now can't be ripped...
Does anybody have this problem too?
Edit: if you can recommend me any alternative which is GTK+ based and doesn't need GNOME dependencies (i use fluxbox, don't need that stuff), able to encode with FLAC and Lame (mp3), good CDDB support, you're welcome
Last edited by neonl (2008-12-08 16:49:48)

neonl wrote:Edit: if you can recommend me any alternative which is GTK+ based and doesn't need GNOME dependencies (i use fluxbox, don't need that stuff), able to encode with FLAC and Lame (mp3), good CDDB support, you're welcome
pacman -S rubyripper
This one can even encode to several formats as once.. has cue support, replaygain support, freedb support and is very secure... (meaning your rip will sound good, without glitches)
Last edited by Rasi (2008-12-08 19:17:08)

Problem with ONE SINGLE site with WRT610N

Similar Messages

Maybe you are looking for