Problem with Online Gaming

I play a game called Command and Conquer Genrals Zero Hour it will play perfectly fine with 11 ping, then it will suddenly lag out. The Interent does go off or anything it just says disconnected form the game. Any ideas? I have UpNp enabled.

You say it's peer to peer, could it be that when you start the game you may have started it during a time when p2p is unrestricted and then as time goes on the p2p restrictions come into play causing you problems?
Search for glasnost test and run that, this will tell you if p2p is restricted or not but be warned you will have to run this at different times of the day as BT's restrictions changes during the day.
If you are on an unlimited pack but signed up before February you will need to "recontract" to one of the new unlimited packs to get unrestricted p2p.

Similar Messages

  • Router problems with online gaming

    Hi,
    I have problems with online gaming. My router is  Linksys wrt54g2 and modem is ZTE ZXDSL 831AII and with two computers. I can't play any onlines game for example Counter-Strike 1.6 or Counter-Strike: Source. When I'm trying to connect in those games servers when it loads too bars I'm geting error that says: "Connection failed after 4 retries". Also I can't play StrongHold, Combat Arms and Battlefield2. I try to bypassing my router by connecting computer directly to my modem and games works. What I should do? Please help me.

    Do you have problems with web browsing or other online applications? If not, the problem may lie with the games themselves. It's possible the games require ports to be forwarded to work correctly. Check the game documentation and see if this is the case.

  • Disconnection problems with online gaming - world ...

    Other users on BT have alos reoported issues with game hangs and diconnection issues with World of Tanks.
    They seem to have started a few days ago. Someitme it is intermittant other times it can last for several minutes.

    Having the same issue since yesterday 6th September 2012.
    World of Tank client keeps disconecting, then has issues logging back in to the client.
    This seems to be hapening to a lot of other players in the UK all on BT
    http://forum.worldoftanks.eu/index.php?/topic/149124-lag-and-disconnection/
    BT had the same problem with World of Warcraft recently, something to do with a BT peering issue. I can only hope this problem is sorted soon.
    No other internet activity is affected.

  • Probs with online gaming due to subnet or IP addresses

    When I first hooked up my router I had probs with Network Magic connections.
    Now that I have it running better... I seem to be having a problem when gaming
    online.
    My boyfriend and I have hooked up our pc's together and have tried gaming online
    together... and it worked for a couple of days.  But with having some D-Link router
    probs... we reconnected everything.
    Now I recall seeing two different subnet numbers for each of us before we redid
    the D-Link... now they are the same...
    So I am wondering if this problem is router related or does it lie with Network
    Magic?  All I know is... that when I try to get on a multiplayer gaming server
    I get kicked by Punkbuster saying:  'PB GUID AUTH: UNKNOWN'.
    I think our online gaming predictament is due to my boyfriend and my subnet
    numbers now being the same. (unlike before).
    (If my prob does not relate to my router and Network Magic... than I thought
    of putting in a Punkbuster Ticket to evenbalance.com)
    Any help/suggestions would be greatly appreciated. : )
    Note: my firewall is configed to allow online gaming, so I know that's not the
    prob.

    LJuliet wrote:
    When I first hooked up my router I had probs with Network Magic connections.
    Now that I have it running better... I seem to be having a problem when gaming
    online.
    My boyfriend and I have hooked up our pc's together and have tried gaming online
    together... and it worked for a couple of days.  But with having some D-Link router
    probs... we reconnected everything.
    Now I recall seeing two different subnet numbers for each of us before we redid
    the D-Link... now they are the same...
    So I am wondering if this problem is router related or does it lie with Network
    Magic?  All I know is... that when I try to get on a multiplayer gaming server
    I get kicked by Punkbuster saying:  'PB GUID AUTH: UNKNOWN'.
    I think our online gaming predictament is due to my boyfriend and my subnet
    numbers now being the same. (unlike before).
    (If my prob does not relate to my router and Network Magic... than I thought
    of putting in a Punkbuster Ticket to evenbalance.com)
    Any help/suggestions would be greatly appreciated. : )
    Note: my firewall is configed to allow online gaming, so I know that's not the
    prob.
    Hi LJuliet ,
    See this post: http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&thread.id=18
    Post back with additional details.
    Also what do you mean by: My boyfriend and I have hooked up our pc's together?
    Through the D-Link Router?
    Please include information on Spyware protection on your computer.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Connection problems with online games

    I have been having problems with all of online games while using the wireless WRT100 router. I am having problems connecting with all the players... Some players I can connect with, but some I can't. I think it might have something to do with a firewall or opening ports. Can someone please help me with this.

    are you palying computer games, or using gaming device like XBOX PS3 etc. Which games do you play? Did you try updating firmware?

  • Problem with online split backup, database oracle

    Hello,
    we use for backup our SAP system online split backup, our database is almost 3TB big. Backup is functional but sometimes (4x-5x per month) backup fail with error bellow. If i understant this problem correctly brbackup lost connection to oracle after split disk system and cant stop backup mode in database and backup failed. How can i solve this problem? Exist some parameter for brbackup for reconnect to db when brbackup lost connection? Thanks for your help!
    BR0051I BRBACKUP 7.00 (25)
    BR0262I Enter database user name[/password]:
    BR0055I Start of database backup: bebnhrzd.anf 2009-09-22 14.52.25
    BR0484I BRBACKUP log file: /oracle/BP1/sapbackup/bebnhrzd.anf
    BR0351I Restoring /oracle/BP1/sapbackup/cntrlBP1.dbf
    BR0355I from /oracle/BP1/sapbackup/cntrlBP1.dbf ...
    BR0280I BRBACKUP time stamp: 2009-09-22 14.53.10
    BR0319I Control file copy created: /oracle/BP1/sapbackup/cntrlBP1.dbf 21676032
    BR0280I BRBACKUP time stamp: 2009-09-22 14.53.13
    BR0315I 'Alter database begin backup' successful
    BR0280I BRBACKUP time stamp: 2009-09-22 14.53.14
    BR0295I Splitting mirror disks...
    BR0280I BRBACKUP time stamp: 2009-09-22 16.07.43
    BR0296I Split of mirror disks successful
    BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
    BR0301E SQL error -3135 at location BrBackAlter-3, SQL statement:
    '/* BRBACKUP */ ALTER DATABASE END BACKUP'
    ORA-03135: connection lost contact
    BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
    BR0318E 'Alter database end backup' failed
    BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
    BR0301E SQL error -3114 at location BrBackAlter-3, SQL statement:
    '/* BRBACKUP */ ALTER DATABASE END BACKUP'
    ORA-03114: not connected to ORACLE
    BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
    BR0318E 'Alter database end backup' failed
    BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
    BR0301W SQL error -3114 at location BrbDbLogClose-1, SQL statement:
    'UPDATE SAP_SDBAH SET RC = '0005', ENDE = '20090922161744', OBJ = ' ', LINE = '#  224     0     0     81358       7817759352        0                0  ALL          online_split    util_file        -
    7.00 (25)' WHERE BEG = '20090922145225' AND FUNCT = 'anf' AND SYSID = 'BP1''
    ORA-03114: not connected to ORACLE
    BR0326W Update of database log header failed
    BR0056I End of database backup: bebnhrzd.anf 2009-09-22 16.17.44
    BR0280I BRBACKUP time stamp: 2009-09-22 16.17.44
    BR0054I BRBACKUP terminated with errors
    Backup utility finished with returncode 5
    Backup FAILED

    Hello,
    in note 534729 is nothing about ORA-03135: connection lost contact only error ORA-03114 which refer to the note 335199 and in this note in nothing about ORA-03114 I want to say two things: this two oracle errors (ORA-03135 and ORA-03114) are not in alertSID.log on db server or in syslog on backup server. This error are only reported from brbackup which is running on backup server which is "client side". We don't have problem with connection from work processes on all instances to db server, we have only problem with brbackup which lost connection after split disk system. How i say this problem occurs only sometimes.  I was tested network connection from backup server to db server via niping a this is result:
    (root@hytti) #./niping -c -H kiuru -B 30000
    Sat Sep 26 14:10:58 2009
    connect to server o.k.
    send and receive 10 messages (len 30000)
    times -
    avg      7305 usecs
    max     46234 usecs
    min      2168 usecs
    bw    8020.50 kb/sec
    excluding max and min:
    av2      3081 usecs
    bw2  19013.91 kb/sec
    do you have any idea?? Thanks!

  • Please Help with online gaming problem. Please.

    Hi. I am new to this website and I searched in the faqs but did not get much help. How do I play Age of Empires 2: Age of Kings with my cousin through online DirectPlay while the router is connected to my DSL modem? My cousin lives 9 to 10 blocks away from me and we usually use to play the game online through DirectPlay but ever since I got the router, he cannot enter my game any more. We don't play through a website or anything similar.
    Please Can someone help me.
    Info
    Computer: Windows XP Service Pack 2
    Router: WRT54G Version.8
    AT&T Yahoo DSL Modem
    Thank you for your time.

    This type of problem usually happens w/ DSL. On your PC lets try doing these steps. Open up Internet Explorer. On the address bar, just type the numbers 192.168.1.1 (username just leave it blank, password as default is admin). This should lead you to a linksys page. Go to status. On the status page, what is the Internet IP Address as listed there?

  • Trouble with online gaming

    Hi,
    I recently got BT Infinity installed and now I'm having trouble with the Playstation Network (PSN).  I get a couple of games of multiplayer and then get kicked out.  This happens every 15 - 20 minutes.  I get the error code 8002AD23 or 8002AD36.  I don't know what they mean.  This never happened with my last ISP and it's getting pretty frustrating.  Has anyone else experienced this problem and was there any solution.  Everything else is fine

    Hi, did you set a static IP before putting your PS3 into DMZ?
    You probably did but just checking. Is UPnP enabled or disabled?
    I had exactly the same problem, kicked me from PSN after 15 mins without fail whilst playing online. I wasn't with BT then but the company I was with were really helpful. They configured a new router for me at their base in the end and then sent it to me. Worked like a dream after that. As far as I know they just set a static IP and forwarded the ports. Have you tried port forwarding or did you just put your PS3 in DMZ via a PC in the routers settings which will open all the ports so in theory it should work.

  • Problem with 970 Gaming Motherboard?

    I am fairly certain that this motherboard (970 Gaming) is quite "broken" There are quite a few complain on this forum and i believe they are experiencing the same problem as i am. When i boot up my pc, sometimes it wont display image, so i need to keep resetting. Also, sometimes PC just randomly shuts off, no matter if im under load or not. This MB is quite new so i guess its kind of expected. Do you think it could possibly the BIOS?
    CPU: fx8350 stock speed
    GPU: XFX r9 280x stock speed
    MOBO: MSI 970 Gaming
    HDD: 1TB Seagate
    SSD: Corsair 128GB LX
    PSU: EVGA 850w Bronze

    Is the RAM matched kit (i.e. 2x4gb) or single modules (i.e. 2x 1x4gb) ?
    Try with minimal setup: single RAM stick, no GPU, only keyboard and mouse connected, only HDD/SSD with OS on it and best if the motherboard is outside of the case.

  • Having problem with online video, problem only in firefox

    I had an update to Firefox recently, and since then online videos (expect for some reason YouTube) are no longer working, so BBC iPlayer is not working, and other random ones you come across on various websites.
    I have updated Flash, and Firefox, even reset Firefox, but still they are not working.
    I get a "This content doesn't seem to be working" message, on iPlayer and similar on the other websites, its not iPlayer itself, as it works for me on IE.
    Dont know what is going on with my Firefox TBH, because some of my ad-ons have stopped working recently, and its to the point where I might as well be using IE.

    the plug in are not missing, they load, but the content itself does not play, just says that the content does not seem to be working, which is not the case in other browsers. Plugins are also update to date, I did mention that I updated flash, and nothing I can see which looks like it maybe causing a conflict.
    Add ons are not the problem, as the reset has uninstall those anyways, and half of them were not working before hand anyways.
    I have also done a system restore, which has not fixed it, as I have had an error with Office 2013.

  • Aspect Ratio Problem with Onlining

    Hi,
    I checked the old posts and couldn't find an answer.
    I'm using Ken Stone's article to online my project. I followed the instructions except for the point right after the new online file is created and just before you capture footage. He says to change the Audio/Video Settings to go from Capture Preset (DV to OfflineRE NTSC (Photo JPEG) to DV NTSC 48 kHz). I did that. I also changed the Sequence Preset (which wasn't mentioned in the article) from Offline RT NTSC (Photo JPEG) to DV NTSC 48 kHz.
    When I captured the full-res footage, the clips were squeezed to look more widescreen. The image hadn't been cropped, just stretched.
    These are the sequence settings for my offline project:
    Frame Size: 320x240 Multimedia Large (4:3)
    Pixel Aspect Ratio: Square - (Anamorphic 16:9 box not checked.)
    Field Dominance: none
    Editing Timebase: 29.97
    Quicktime video Settings
    Compressor: Photo - JPEG
    Quality: 35%
    These are the sequence settings for my online project:
    Frame Size: 720x480 NTSC DV (3:2)
    Pixel Aspect Ratio: NTSC- CCIR 610/DV(720x280)- (Anamorphic 16:9 box not checked.)
    Field Dominance: Lower (even)
    Editing Timebase: 29.97
    Quicktime video Settings
    Compressor: DV/DVCPRO - NTSC
    Quality: 100%
    I filmed the original footage on miniDV (NTSC) with a Canon GL2 3CCD camera. The footage was onlined with a Sony DCR-HC32 1CCD miniDV (NTSC) camera. I'm using FCP 5.0.4 on an apple powerbook g4. OS 10.4.8
    I'm sure the solution is something small that I'm missing. Thanks a lot for any help!

    Hey you might have already done this but check the settings of the new clips not just the sequence. Right-click on one of the affected clips in ur browser then go down to item properties-> format and see if the anamorphic option is ticked on these. Hope this helps,
    Howard
    G5 iMac 20inch, Macbook   Mac OS X (10.4.7)   FCS 5.1, 500GB External

  • Problems with j2me gaming

    Hi guys. I need you to help me with this problem. I'm developing a j2me game using netbeans and the gamebuilder component. So everything it's ok, but the problems come when I charge the application into my cellphone. The first problem is on the collidesWith() method. In spite of the hero sprite and the enemy sprite are saperated from many pixels, the CollidesWith method fires by itself. As an example, the hero sprite is at the top of the screen and the enemy sprite is at the bottom of the screen, when the level begins, the collidesWith() method fires so the application show the game over screen as if the enemy touched the hero, which is not true.
    The second problem is that when I try to stop the threads. For example if the hero sprite dies, all of the threads which drives the enemies should stop, so the player needs to restart the level for try again the level. The problem is that when the levels restarts, some of the enemies doesn't move.
    Any of you know what the problem could be it?? I'll appreciate your quick answers. Thanks in advance.

    HI Friend:
    You install jdk1.5.try it!

  • Problem with online Adobe tutorial.

    I am following the online tuturial from Adobe for Dreamweaver however I am encountering a problem I can not seem to solve, I am at part 3 now " delete feedback entries".
    http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt3_05.html
    After that I have done everything (according to me in the way mentioned) I am still not able to delete any entries.
    After pressing " delete this entry" I am not reffered to the admin indexpage but to a blank one containing the ID of the post. When I afterwards look the entrie has not been deleted either.
    Any help would be nice so I can move on to the next part of the tutorial.

    I am following the online tuturial from Adobe for Dreamweaver however I am encountering a problem I can not seem to solve, I am at part 3 now " delete feedback entries".
    http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt3_05.html
    After that I have done everything (according to me in the way mentioned) I am still not able to delete any entries.
    After pressing " delete this entry" I am not reffered to the admin indexpage but to a blank one containing the ID of the post. When I afterwards look the entrie has not been deleted either.
    Any help would be nice so I can move on to the next part of the tutorial.

  • The problem with the gaming performance

    i am usin hp 15-g206ax notebook and it have a quadcore processor and 4gb ram and a 2gb graphic card but its gaming performance is not good Please tell me what i can do for improving the gaming performance

    There is not much to be done. You have the AMD HD 8570M graphics with dedicated video memory. That is in the lower middle of the spectrum as far as gaming is concerned. Way better than most laptops but way less powerful than a true gaming machine. Just keep the drivers current is about all. Turn down visual effects. There is no upgrade possible for the hardware.

  • Problem downloading Captivate trial problem with online trial of ELS

    The Captivate download application cancels the download. Online ELS takes 5 - 10 minutes to load and connect then does not recognize my Adobe password.

    Jeffrey could you please let me know what OS are you using and any errors you get while downloading the software.
    Make sure you have high speed internet connection as the file size is quite large, For Windows it's 5Gb and for MAC it's 4GB.
    Please follow the instructions below carefully to download eLS6.1 directly without using the download manager :
    1. Navigate to the eLS6.1 Downloads page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=elearning_suite
    2. Sign in with your Adobe ID.
    3. Copy and paste the following links on the address bar as per the OS you own one at a time and hit enter :
    eLS 6.1 Windows English
    http://trials3.adobe.com/AdobeProducts/ELS/6_1/win32/eLearningSuite_6_1_LS12.7z
    http://trials3.adobe.com/AdobeProducts/ELS/6_1/win32/eLearningSuite_6_1_LS12.exe
    eLS6.1 Mac English
    http://trials3.adobe.com/AdobeProducts/ELS/6_1/osx10/eLearningSuite_6_1_LS12.dmg
    4. Save the files.
    5. Run the .exe if you are on Windows else the .dmg file if on MAC.

Maybe you are looking for